Existing DV project (from HDV tapes) need to recapture HDV and master OUT

here is one nightmare..
Is there a way to recapture existing DV project (FCP 5.1.4) to HDV ?
the tapes are HDV - but SOMEONE did not switched the HDV to DV convertor OFF on our deck..
we need to deliver the master to client..
thanX for your help

j3h,
This could very well be a nightmare if you didn't capture planning to do an online/offline workflow. We do not do this so I am no expert but I can help you search for the right answers. You want to online your DV project. I think that Media Manager can help with this. I caution you, if you did not Log and Capture (ie. you used "Capture Now") then you are in for a large headache. If you used log and capture then you should be able to recapture your media and have media manager replace your DV clips with HDV clips.
K

Similar Messages

  • Receiving error after loading Dreamweaver... In a time crunch ...project deadline... need to identify problem and fix as quickly as possible

    Receiving error after loading Dreamweaver... In a time crunch ...project deadline... need to identify problem and fix as quickly as possible
    Occurs after I load Dreamweaver; most of the time --- Sometimes not until I try to access CSS Designer
    Have screen capture of error (see next page)
    Windows 7 Home Premium - Service Pack 1
    Platform 64 bit OS
    Has worked fine until recently
    Have installed one program (Print Artist Platinum 24 by Nova Development)
    Tried restore point but not dated back far enough
    Uninstalled and reinstalled Dreamweaver CC 2014 from Creative Cloud.. same error
    Any Ideas?

    Troubleshoot JavaScript errors | Dreamweaver CS4, CS5, CS5.5, CS6
    Try step #4 and step #12

  • Data from a file need to be read and mapped  into a custom table of R/3

    Hello all,
    This is related to inbound to  SAP ECC via SAP PI.
    There is a requirement concerning PI part that data from a file need to be read and mapped  into a custom table of R/3.
    To have this scenario developed , do we have any other  option than the Proxy ?
    My understanding is as follows : File --> SAP PI --> Proxy
    You suggestions are welcome.
    Regards,
    Rachana

    Hi Ravi,
    As suggested by Inaki, you can use proxy communication in recever.
    but you can also use the below
    FILE -----> PI -------> PROXY
                                  RFC
                                  IDOC
    to communicate to ECC system.
    Regards
    srinivas

  • I am 19 days from my contract needing to be renewed and I broke my screen.    How far in advance can you renew before the actual renew day?

    I am 19 days from my contract needing to be renewed and I broke my screen.    How far in advance can you renew before the actual renew day?

    Basically it is on the day your contract ends. However some Verizon wireless corporate store managers can over ride that and update possibly a week early. But its iffy.
    Now Verizon will let you upgrade to the Edge program but you have a broken device and they will prey on you since you are desperate for a device. Edge plan is paying full price over 20 months and paying taxes on it up front, you then after paying 60% of the device off can edge up to another device. Now if you pay 60% off at anytime after 30 days you can continue to trade them in for new as much as you want.
    Or you can wait it out get a new free device under contract or reduced cost device again under a 2 year contract.
    The edge plan is no contract.
    Good Luck

  • My daughter is 12 and need books that highlight and read out loud how do i know whick book have that, i could only find kid books

    my daughter is 12 and i need books that highlight and read out loud, how do i know whick books do that

    Regarding the cursor moving on its own, see:
    My mouse keeps moving around on its own, as if someone is remotely controlling my Mac!
    This is not known behavior of Flashback.  To make sure you're not infected, just install any updates that are available in Software Update.  For more info on this, see About the Flashback malware.
    That e-mail just sounds like a phishing attempt, and trying to open and view the attached zip file is a major error!  It probably contains malware.  Fortunately for you, it's almost certainly Windows malware, as I've never yet heard of a case of Mac malware being sent via e-mail in this way.  But it could happen, so you should never, ever open attachments from people you don't know, especially in such suspicious circumstances!
    Finally, I, like etresoft, have never heard of Avira.  There's a lot of bad AV software out there, so without knowing more about it, I would agree that it should be removed, using whatever uninstaller is provided by Avira.  If you want to use AV software, use either Sophos Anti-Virus for Mac Home Edition or ClamXav.  Both are free and excellent.
    (Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.)

  • Free sample from vendor (import) need to pay freight and duties

    All SAP Gurus,
    Vendor outside India has send us free sample.
    But we need to pay duties and freight over it.
    How this can be mapped in SAP?
    Regards,

    Hi,
    You can post fright charges by creating purchase order for 0.1 rate with fright & duty charges as per your requirement.
    Also you can pay fright charges by direct posting in vendor account with FB60.
    Reason: - In Free quantity purchase order you can't enter fright charges for material, So you have to crate normal purchase order for fright charges.
    Regards,
    Mahesh Wagh

  • Export HD project from CS4 - assistance needed!

    I could use some advice working my way out of what feels like a sticky situation. Partially because I'm not extremely experienced with video production (espcially exporting), but also because I was a punk and broke that cardinal rule of not switching to HD before you know what you are doing. And thus my cousin's wedidng video has taken longer to edit and export to author a DVD than planned...
    It is a big mess to unravel, so if anyone can offer any advice, I would appreciate it.
    I have everything edited through Premiere in CS4. Trouble is I cannot figure out how to export the footage in such a way that 1) fills a widescreen tv all the way and 2) is actually the high quality I'm expecting.
    Some detail:
    1) I export into a widescreen format (my preferred export setting is H.264) but when playing the DVD on a widescreen TV, it plays as widescreen, but there is a nice large black border surrounding the entire image - it just doesn't fill up the entire screen. On a non-widescreen TV it doesn't look properly letterboxed and looks extremely close to a 4:3 ratio.You can see the difference between the widescreen letterboxed DVD menu, and the much thinner black 'letterboxing' of the wedding video. How can I fix this?
    2)
    The quality just isn't HD like I was expecting, and like it looks like when editing in Premiere. In fact, sometimes it doesn't even seem as good as SD quality, especially when there is motion in the frame and when tracking movement. I filmed with two different cameras I had borrowed from various folks. One camera shot in 1440x1080, and one shot in 1920x1080. I didn't know this till I was pulling the footage in for editing. I don't know if this has anything to do with the quality on export - both look about the same in Premiere when editing. When watching the exported video, it does not handle any motion in the frame well at all - blurred motion is all over the place. It doesn't do this in Premiere. I'm wondering if it is because I should deinterlace the footage? I don't know if my camera recorded in 1080i or 1080p (and have no clue how to figure this out). Or, should I try to turn the 1440 footage into square pixels to correct the aspect ratio?
    I've read some forum posts, and am wondering if the problem is that CS4 can't export HD footage for standard def. DVDs. I figured if the file size ended up being small enough to fit on a standard DVD, it would work just fine. I've exported. Perhaps this is the problem with the film quality? In which case, what suggestions are there for how to export?
    Essentially, I could use any suggestions about how to export this footage in a format that will play on either widescreen or standard aspect ratio (I'm game for whatever will provide the best quality picture at this point, even if  I lose the sides of my footage converting to 4:3). Or, is it that I need to make some changes before even going to export?
    Thanks for your thoughts. And yes, I am so incredibly, fully aware of the folly of moving to a format I know aboslutely zilch about. I actually had that thought when I was preparing to film the wedding and though - meh, I've had no real trouble before with any of my video projects, I've got to try HD someday! UHG!
    Thank you,
    Heather

    I filmed with two different cameras I had borrowed from various folks. One camera shot in 1440x1080, and one shot in 1920x1080
    That is not the end of the world. Set up an AVCHD sequence (1920x1080 50i for Europe, 60i for USA and non-anamorphic) and drop the footage into that. 1440x1080 will adjust itself.
    If you want best quality export your timeline to BluRay (you need a BD burner) Forget about HD on DVD.
    If you do not want BluRay you have to settle for less quality on DVD. (H.264 is not an option for making a DVD)
    See export settings:
    Once exported load the two files (one for audio and one for video) into Encore, author and burn.

  • Create existing MI project from DTR

    Hi,
    I have a problem with creating an MI project (like SAP MAM 2.5) which is uploaded by someone else from DTR in my SAP NetWeaver Developer Studio 7.0 (2004s) SP15.
    When I press mouse right --> create project (in DTR perspective) on my project, everything is synced to my client, also the .classpath and .project file. When I switch to my MI perspective and then the navigation view or package view or MI view, all three I cannot find my project back in NWDS.
    When I look at my C drive via Windows Explorer I can find all the files.
    I reinstalled NWDS a few times. I also tried closing the NWDS after creating the project and restarting it, but this was also not working.
    Can anyone help me what is wrong or what I am doing wrong.....
    Thanks in advance and kind regards,
    Bart

    Hi,
    this could have a few reasons:
    check if the project is available in standard MI perspective. Then check if you have the same plugin.
    If that is the case we can drill into it a little deeper.
    Best solution would be - to be onest - to ZIP your workmates NWDS folder, copy it over to your location and unzip it there. furthermore you should have the same setup if it comes to JAVA and project files. If that is the case, you will have pretty much no issues with this, cause it should have the same behaviour on all computers.
    Regards,
    Oliver

  • Reviving an old FCP project from version 5.1 to current software and Back

    I am about to start revisions on a project that was started using version 5.1
    I have since upgraded my FCP software to the current version.
    My project contains over 100 hours of footage along with an enormous amount of graphic files, logos, etc.
    I'll be taking the job to New York and will be working at an editing company that is still using 5.1 software. AFter that it's back to LA for more work and then another NY trip.
    I'm wondering if it makes sense to just keep the project at 5.1 to avoid any strange media issues. I know in the past from my decade + time using an Avid that it always makes sense to finish a job through approval before messing with upgrades.
    Can anyone offer some advice? I'm up against some newbie producers who have very little experience working with clients and they are encouraging me to just jump back and forth between software versions. My common sense says to not tempt fate.

    You are right to be cautious, I have just been through the whole 5.1 to 6 process and I must admit that the BIG projects were the ones I had issues with. After a lot of searching through these forums and posting questions I had to resign myself to rebuilding a project shot by shot. FCP6 would not even open the project. Nice to revisit it and can see how I can improve on it, still though it was a week of my time and $'s that the client and Apple are not going to pay for.
    If the project will open in FCP6, go for it, make sure it is a duplicate though, there are plenty of people on the forum saying they have not had issues, I think the depth and complexity, have some bearing on your success.
    Tony

  • I sent a project from imovie on my iphone to itunes and it said that it was located in file share on itunes but I cant find it.

    where is file share on itunes? please help!!

    Photostream will only work with photos newly taken on your iPhone.   It will not work with photos already on your iPhone.  The idea of Photostream is to allow you to take a photo(s) on your iPhone and a copy will be extended to the Photostream album on the iphone as well as other devices(with Photostream turned on) and your PC (with icloud control panel installed and photostream turned on) so that you can copy those files into your local folder.
    If you want to transfer old photos from your iPhone, connect it to your PC and there will be an AUTOPLAY popup window for you to select to import pictures to your local folder.
    If the Autoplay window dose not showup, you can go to windows explorer to look for your iPhone and right click to select import pictures:

  • Importing Video from Video from GV-DV1000 NTSC Sony VTR - Image and Audio out of sinchronization

    Hi, I´m using Final Cut Express 10.1.1. and to import video, the Sony GV-DV1000 NTSC.  My Operating System is Maverick 10.9.2
    When I import a Video, the audio and video is sinchronized but when I start to edit, video and audio are not sinchronized.
    The connection from the VTR to the iMac is thru a firewire cable to a thunderbilt cable. There is a way to avoid this problem?
    Thanks for your prompt response,
    Sincerely,
    Alberto Quiros Bonett

    We have heard of some capture issues with DV and HDV.
    Most users get some success by capturing with QuickTime X.
    Try a test.
    Al

  • Cannot directly open the browser from the icon. "problem loading webpage" and "timed out" are the messages. Access was accomplished by using yahoo messenger and opening my email. if I attempt to open a new page, I recieve the aforementioned warnings.

    no link to open access to the internet. I used Yahoo Messenger, clicked on the 'mail icon' and since Firefox is my default it opened and I was able to continue from there. If I try to click File, open New Page, I get the "problem loading webpage" and "connection timed out" messages

    changed my homepage to Yahoo. Now Firrefox works but still cannot access ANYTHING 'Google"!

  • HT4623 Videos from Netflix, youtube, etc. frequently stop, freeze and run out of sync on my ipad gen4.  Any hints as what to do to correct this problem?

    Videos on my ipad 4gen stop, freeze and when they do restart at times are out of sync.  This happens on Netflix, youtube, FoxNews, etc. Any suggestions as to the problem or correction.

    The most common cause of this type of issue is an inconsistant or slow internet connection.
    But, you might want to try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray BEFORE doing the reset.

  • Export a whole project from a computer to another

    Hi everyone!
    I use Adobe Premiere pro CC7 and would like to export a Video montage project from a Macbook to a Windows computer and inversely. Do you know if it's possible, and how?
    Thank you!

    I believe that I have the same question. The thing on these forums is that there are so many people doing so many different things with so many different setups for just as many different reasons. Gotta be really specific. That being said, I hope that I'm clear enough. My wife has a Windows 7 PC running Premiere Pro CS6. I have a Mac running Premiere CC 2014 on Yosemite 10.10. She started a project with all of the media on her D: drive. She opens her project and goes to export it as an MP4 and the whole computer freezes up about 1/3 into it. We've tried a few things but I wanted to try and find out, is there any way to package up the project, maybe like After Effects does, so that I can easily move the project to my computer and try rendering it there. The folder where she saves all of her media is shared, but when her computer freezes up, the shares are not accessible. We both want to try separately to solve the issue, so, any way to easily package up everything the project needs and copy it to my Mac so that we can work independently on being successful?

  • Unable to open existing idvd projects

    When trying to open an iDVD existing project from the desktop, it will not open and comes up with a Connection failed - the server may not exist or it is not operational at this time.  Any recommendations on how to fix this and get it to work?

    I think bymistake the system preset has removed or moved from <installa
    edpath>\Program files\Adobe\Adobe Encore CS5\Preset\internal preset\Blu-ray NTSC 1280x720 59.94p MPEG-2.epr.
    Please check the preset in above location. If the "Blu-ray NTSC 1280x720 59.94p MPEG-2.epr" is not there in the above location then please search the preset in your system and copy that in the above location.
    If you copy the preset in above location then you existing project will open.
    Thanks,
    Pankaj Gauba

Maybe you are looking for