Existing Info object inactive after BC from different version

Hi,
This is very bad!  The system I am working on was upgraded from 3.5 to 7.0.  I activated business content for SRM info providers.  I managed to load master data, create info providers, etc, etc.  When it came time to transport I was having problems all kinds of problems - the objects in QA became inactive also.  So I re-activated all those objects in Dev and tried to transport again, it didn't give me an error but it still did not activate in QA - in the transport, I found the following messages.  My transport was only the object and the attributes - no rules.
Transfer structure 0SBOGL_ACCOUNT_ATTR_AC could not be deactivated
Transfer structure 0SBOGL_ACCOUNT_ATTR_AE could not be deactivated
Transfer structure 0SBOGL_ACCOUNT_ATTR_AF could not be deactivated
Transfer structure 0SBO_ALTACT_ATTR_AF could not be deactivated
Can someone help me Please!!!!
Thanks
Suzanne

Objects were inactive - activated and now it's ok

Similar Messages

  • Info Objects Inactive after transport

    Hi,
    I have done a transport from PRD to DEV by collecting some info objects.
    While doing the transport 'Overwrite' option has been taken. Most of the objects in Transport are overwritten in traget System(DEV).
    But the info objects are inactive. Can anybody give reason why the info obejcts are inactive.
    Any ideas are helpful.
    Thank you,

    Hi ,
    I have checked the transport request and it is giving return code 4 at method execution.
    the log says that program 'RDDEXECL' is cancelled, because of an ABAP Dump
    'DBIF_RSQL_TABLE_UNKNOWN'.
    Any ideas..
    Thank you.

  • Issue with Info Object Transport after changing Data Type

    Hi Experts,
    We have a DSO which is running past 5 years. And recently(3 days back) we added new fields into that DSO. Delta loaded for last three days and new info object (Say XXX) data populated into DSO.
    Now the problem is, We identified that, info object data type is not correct. We used data type NUMC  instead of CHAR.So Character information is missing for that field.
    Example:
    Data from ECC: ABC123
    Data Loaded to DSO: 123 (Missed character ABC)
    So we deleted data from DSO and changed the info object data type in Development system.
    And also I have deleted only last three days delta records from DSO and transported my info object to Production. But its giving error as: Info object contains data in DSO".
    But that info object field is empty in DSO. I have already deleted last three days delta.
    Do I need to Delete all 5 years data from DSO to change the data type of recently added new info object ?
    Please give me your solutions and ideas to solve this issue.
    Thank you,
    Best Regards,
    Santhosh

    Hi Raman,
    Thank you for your answer.
    When I changed the data type of info object in Dev, I deleted the content of DSO. And same thing transported to QA as well. Before importing changed info object, I just deleted the content of DSO from QA. So transport done successfully QA.
    But in Production we have a history of past 5 years. So I cant delete all contents of DSO.
    So just deleted only the delta request's which contains data for that info object(3 days back, we moved that info object(NUMC data type) to production,So last 3 days delta only loaded for that info object). And tried to transport it. But it was failed. I am sure we need to drop all data from DSO, if I am interested to go with same info object.
    I have some comments on your first approach,
    1. If we delete info objects from Dev DSO and transport to Production will give transport failure, Why because, my previous transports errors clearly saying that info object contains data in DSO . So it wont allow to remove that info object from DSO.
    2.We are using same info object technical name in BO Data federator also. So if we change add new info objects again we need to make changes with BO as well. I am thinking this point as my last option if i cant find any other solution.
    Thank you.
    Best Regards.

  • Create new or use existing info object ? How to decide ?

    All;
    I have this question.
    I enhanced the data source with a field user ID, now I am mapping it in the transfer rules in bw. When I searched in the system (ctrl F in infobjects of RSA1) I could find related info objects but they are currently being used in several places. 
    Can I use the existing one or do I have to create new info object ? How can I decide this ?
    Thanks for your help.

    Hi,
    it just depends on the content of the 0USERNAME or 0USER_NAME depending on use. Usually these Infoobjects contain the source system user name (login name) for example the entries maintained in SU01 of the SAP R3 system.
    If your extractor delivers the same entry, feel free to use it. If it is another kind of username (i.e. external system, database user etc.) it may be usefull to define a new object. But if you define your own ZUSERNAME Infoobject remember to provide loads for the Text and attribute fields (if required). This is for free, if you can use available infoobject which are already maintained by earlier projects.
    Kind regards,
    Jürgen

  • Mission control inactive after waking from sleep

    Having an intermittant issue where the mission control functions are no longer working after waking from sleep.  I can't swipe between desktops, or activate mission control by clicking on the dock icon.  The only way to get it back is to use the Activity Monitor to force quick the dock and have it re-launch.  Then everything is fine.  Doesn't happen all the time on sleep.

    Did it happen each time?
    As I know, if you press at touch panel while system booting.
    It maybe influence touchpanel initial. ->It will cause touchpanel no function when you enter system.

  • Can Station Gloabals from different versions of TestStand be used with TestStand 2010?

    I have an older version of TS - ver. 4.01.  I just renewed my subscription and have 2010 now.  Can StationGlobals from one version be copied directly into the cfg directory of a different version?  It appears to work, but I want to make sure there are no underlying problems.

    Hi,
    Seems like you have answered your own question. When TestStand closes it will update the StationGlobals.ini file so if you were going to have any problems you probably would have seen it then.
    Regards
    Ray Farmer

  • Accessing an itunes library from different version of itunes

    I recently installed yosemite and with that came iTunes 12 since I have an iPhone 6 with 8.1 I will keep iTunes 12. But I have been having major issues with syncing video files to my iphone 4S(ipod touch now) 7.1.2JB. The files never sync or appear to sync and then when I go to view them on the iphone the size shows up as zero. So I feel like if I go back to an older version iTunes all will be right in the world. I just wonder will I have any issues if I have different versions accessing the itunes library files? Planning on using iTunes 11.4 and iTunes 12.
    TIA

    Open the iTunes preferences, click on the Advanced tab, turn off the option to automatically copy the music to the iTunes Music folder, and then drag the library on the Windows partition to the open iTunes window. This will not transfer playlists and other metadata and will not keep the Mac version of the library in sync.
    (33924)

  • Can't download a song from different version of the same group/album

    Well, I'll try to be as specific as I can. Here it goes: There are two versions of Muse's album "The 2nd Law" - Normal and Deluxe. I've bought Madness song from Normal version, then I previewed the whole album, liked it and decided to "Complete the album". But I did that with Deluxe version - not Normal.
    As a  result I have incomplete Deluxe album (without Madness song) and just lone song in Normal album... There's no way to download Deluxe version of Madness now. It says "Purchased" but doesn't allow me to download it. Hiding/deleting Normal song doesn't help either.
    Is there any way to complete Deluxe album now? Or replace Normal version of Madness song with Deluxe one?
    And before you asked - there's slightly (but audible) better quality of the recording in the Deluxe version.

    You can try contacting support thru this link http://www.apple.com/support/itunes/contact/
    so they can assist you with this.

  • WebI reports getting corrupted after pointing to different version of the Universe

    Post Author: Sujitha
    CA Forum: WebIntelligence Reporting
    Hi
    I am facing a very difficult and weird problem ..plz help !!!
    I am curently working in a project which has different phases of testing.While migrating my reports from Dev environment to SYS, I had to change the database connection in the Universe to SYS.After doing so,I point the reports (webI reports) to this new universe.
    All my report variables are getting corrupted and automatically appended with a " " in the formulae of the report
    for eg if my report variable is =if([dimension object];" ";" ")
    the variable becomes "=if([dimension object];\" \";\" \") "--- plz note that a \ gets appended in front of the " within the formula!!!
    This problem repeated when i had to migrate the reports from UAT back to SYS!!!
    I have a report which is fullly hard coded(business wants so!!) and has some 300 report variables... so I cannot manuaaly edit them in each migration
    Can you please help me if you have a work around for this issue??
    I read in BOB that its a BO bug,it it true?
    Thanks in advance

    Post Author: Sujitha
    CA Forum: WebIntelligence Reporting
    Thanks a lot for ur quick reply
    The objects in the universe are just teh same,I just import the existing universe,change the connection to SYS and then export it to a new folder.
    Its behaving weird,yesterday i createda  new folder instead of using the existing SYS folder for universe,i exported the universe.NOw I pointed the report with 300 variables to this new universe and it was working fine... and then when i did the same for the remaining reports..all got corrupted like stated before... i had to manuaaly go and esit every variable cause it was urgent for me to migrate to SYS.
    I was saved cause my report with large variables got saved!!!

  • Absent AIF audio in CS6 after converting from earlier version

    The timelines I'm working on were originally created in Premiere 5 and 5.5.  The issue I'm having is when I openthem in CS6 some AIF files stop showing any wave form and playing (the Mp3's are fine). 
    This doesn't happen on all timelines or all the time - but one timeline in particular. The audio is gone both when playing a single clip in the source monitor - and when playing a sequence in the program monitor.  But when I go back to the original file - it plays fine (these files are stored in an external hard-drive enclosure attached to the computer).  But even when I re-import the audio file - it doesn't play in the timline.
    I'm on a new Imac with 3.4GHz Quad-core Intel Core i7, 16GB 1600MHz DDR3 SDRAM, 1TB hard drive1, NVIDIA GeForce GTX 675MX with 1GB
    (Not to muddy the water - but just to provide all potentially related info...each time I open the file, random video files go wacky - turning into a red and green screen.  By contrast, when I re-import these files - they work in the timline fine).
    Any help would be hugely appreciated...I'm at a loss! 
    Jacob

    Hi jzhess,
    Please check the below forum link. The issue might be with the audii channels
    http://forums.adobe.com/message/5602187#5602187
    Regards,
    Vinay

  • JNI_CreateJavaVM returns JNI_ENOMEM (-4) from different versions of the jre

    I have created a JNI dll, invoked from a VBA Excel add-in to execute Java code. This works fine until I introduce the -Xmx parameter as a vm option.
    Before creating the VM, I use a VirtualAlloc/Free loop to make sure the -Xmx parameter is not too large, decrementing it by 2MB each time until an allocable amount is found (thanks to [jurberg's post|http://forums.sun.com/thread.jspa?forumID=37&threadID=5220601]; my version, slightly modified, is posted below). I then pass that value to the VM via the -Xmx option.
    This works great when I am using a JRE 1.6 installed in the "C:\Program Files\Java\*jre1.6.0_xx"* directory. When the same* JRE version is installed in the "C:\Program Files\Java\*jre6*" directory, JNI_CreateJavaVM fails with JNI_ENOMEM. Calling GetLastError returns 0 ("operation completed successfully"). Using a *1.5 JRE*, this also fails, returning JNI_ENOMEM, but GetLastError returns error code 6 ("the handle is invalid").
    A little about my platform:
         Windows XP Pro
         Building JNI dll using Microsoft Visual C++ 2008 and 1.5 JDK
    I have multiple JREs and JDKs installed on my system as this is a dev machine, but I have the same problem on a non-dev machine running XP Home.
    Here is a snippet of my code used to create the vm:
         // create the JNI structures
         const int numOptions = args.size();
         JavaVMInitArgs vm_args;
         JavaVMOption* options = new JavaVMOption[numOptions];
            log("Creating JVM with parameters:");
            int i = 0;
            char * nextArg;
            for (itr=args.begin(); itr != args.end(); itr++) {
                nextArg = new char[(*itr).length() + 1];
                strcpy(nextArg, (*itr).c_str());
                options.extraInfo = NULL;
    options[i++].optionString = nextArg;
    log("\t" + string(nextArg));
         vm_args.version = CRUSH_JNI_VERSION;
         vm_args.options = options;
         vm_args.nOptions = numOptions;
         vm_args.ignoreUnrecognized = JNI_FALSE;
    // load and initialize the Java VM, and return a JNI interface pointer
    JNIEnv* env = NULL;
         err = (*createVM)(&jvm, (void**)&env, &vm_args);
         // err is -4 (JNI_ENOMEM) in the cases described above
    Does anyone have any suggestions on what is going on here and how I might make this code stable for all 1.5 and 1.6 JREs, regardless of where they are installed?
    Thanks in advance,
    Sarah
    Code to determine max -Xmx value:static const DWORD NUM_BYTES_PER_MB = 1024 * 1024;
    bool canAllocate(DWORD bytes)
    LPVOID lpvBase;
    lpvBase = VirtualAlloc(NULL, bytes, MEM_RESERVE, PAGE_READWRITE);
    if (lpvBase == NULL) return false;
    VirtualFree(lpvBase, 0, MEM_RELEASE);
    return true;
    int getMaxHeapAvailable(int permGenMB, int maxHeapMB)
    DWORD          originalMaxHeapBytes = 0;
    DWORD          maxHeapBytes = 0;
    int               numMemChunks = 0;
    SYSTEM_INFO          sSysInfo;
    DWORD          maxPermBytes = permGenMB * NUM_BYTES_PER_MB;     // Perm space is in addition to the heap size
    DWORD          numBytesNeeded = 0;
    GetSystemInfo(&sSysInfo);
    // jvm aligns as follows:
    // quoted from size_t GenCollectorPolicy::compute_max_alignment() of jdk 7 hotspot code:
    // The card marking array and the offset arrays for old generations are
    // committed in os pages as well. Make sure they are entirely full (to
    // avoid partial page problems), e.g. if 512 bytes heap corresponds to 1
    // byte entry and the os page size is 4096, the maximum heap size should
    // be 512*4096 = 2MB aligned.
    // card_size computation from CardTableModRefBS::SomePublicConstants of jdk 7 hotspot code
    int card_shift = 9;
    int card_size = 1 << card_shift;
    DWORD alignmentBytes = sSysInfo.dwPageSize * card_size;
    maxHeapBytes = maxHeapMB * NUM_BYTES_PER_MB;
    // make it fit in the alignment structure
    maxHeapBytes = maxHeapBytes + (maxHeapBytes % alignmentBytes);
    numMemChunks = maxHeapBytes / alignmentBytes;
    originalMaxHeapBytes = maxHeapBytes;
    // loop and decrement requested amount by one chunk
    // until the available amount is found
    numBytesNeeded = maxHeapBytes + maxPermBytes;
    while (!canAllocate(numBytesNeeded) && numMemChunks > 0)
    numMemChunks --;
    maxHeapBytes = numMemChunks * alignmentBytes;
    numBytesNeeded = maxHeapBytes + maxPermBytes;
    if (numMemChunks == 0) return 0;
    // we can allocate the requested size, return it now
    if (maxHeapBytes == originalMaxHeapBytes) return maxHeapMB;
    // calculate the new MaxHeapSize in megabytes
    return maxHeapBytes / NUM_BYTES_PER_MB;

    I have a similar, but I think much simpler problem. Namely, I get ENOMEM's when as far as I can tell there's plenty of memory available. It seems to have something to do with how Windows is configured, although I've never been able to determine what it could be.FWIW, in my case, I found that if I loaded my JNI dll into a console process, the max heap requested was always allocated. But when loading into Excel, the same amount would be too much. This was partly due to the fact that Excel has its own memory management, limiting the amount of memory workbooks can use. Also, it could be due to the vm not being able to reserve a contiguous chunk of memory for the max heap space.
    Why (and how) separate the permanent generation space from the rest of the max heap? It seems you'll fail if you can't get that much space (which is the why) but how did you determine what it is?The VM uses the perm gen space plus the requested max heap space when attempting the VirtualAlloc call to verify that it can allocate the specified amount. The default perm gen is 64MB, but that can be changed via the -XX:MaxPermSize vm parameter, so I allow for any requested value.
    What's CRUSH_JNI_VERSION? It's not in any .h file I have.That's just my own constant defined to be either JNI_VERSION_1_4 or JNI_VERSION_1_6.
    Why are you messing with the bootclasspath? (I suspect you're adding something to it. Generally the VM can find it's own damn classpath).Yep, I'm adding the 2.1 JAXB jar to the bootclasspath because earlier 1.6 distributions included JAXB 2.0 and I needed 2.1.
    -sarah

  • How do I update to latest version of Premiere Pro and After Affects from current version 6?

    Cyrrently running version 6 of Premiere Pro and After Affects.
    How do I go about upgrading?

    Hi Lifeonmediaboy,
    You can follow the link: https://creative.adobe.com/plans and look for the upgrade for your products.
    Thanks,
    Ratandeep Arora

  • Performance problem after upgrade from Web version to Basic version

    A couple days I ago I 'upgraded' my SQL Azure database from the Web service tier to Basic. Since doing that the performance on many of my queries as dropped noticeably. I've made no schema changes, and the amount of data in my database has changed very
    little since the upgrade. Has anyone had this same problem?
    Randy Minder

    Randy,
    See this blog about how to upgrade to the new tiers and some advice on finding the right fit.
    http://azure.microsoft.com/en-us/documentation/articles/sql-database-upgrade-new-service-tiers/
    Basic is not equivalent to Web in the new Editions tiers. While you do 'upgrade' to editions, granting you access to new features and the tiers themselves, you can now choose an experience which has less performance than you had previous in Web/Business.
    Try upgrading your server to a new tier based on the advice in the article above. If you read the article below:
    https://msdn.microsoft.com/en-us/library/azure/dn369873.aspx
    You can see that standard is actually targeting at many of the production use cases of Web, where Basic is targeting developers who were using Web, before, to test out their applications. Basic isn't intended for scenarios with multiple concurrent users.
    Hopefully that helped. If you have any other questions, feel free to reply.
    Regards,
    Chris

  • Install info object from D version to A version

    HI,
    I am trying to install the infl objects from D version to A version. I have selected Grouping mode(Only necessary obects0 B default, Collection mode (Collect automatically) Didsplay (Hierarchy mode) and dragged the in fo objects from left side to right side into collected obects and selected install mode (Install and transport) , i gave the trsport also and installed, but ater install if i see in RSD1 still it is in D version only, not in active version only.
    Do i need to any other steps required to install info object from D version to A version. Please suggest me if i mssing some thing.
    Thanks
    Best regards
    SG

    hi
    if you want to install only the info objects, follow the steps
    click the source system icon on the top
    click on objects type under bi content
    select collection mode automatically
    select only necessary objects, under grouping
    expand your info object and select your info object and transfer
    check the box , in front  of info object
    install in in back ground.
    by default display is hierarchy.
    check the job in sm37, when the status is finished only you can check the info object,
    if still it is D version then goto rsd1 , give the info object name and make it active.

  • Business content info object installation:

    Hai gurus,
    when i install info object ( omaterial) got an error as:
    Version A of DataStore object 0RF_DS02 does not exist
    Message no. RSDODSO102

    Hi Sampath,
    When you try to install any of the Business content, there are some important settings that you should check. This includes,
    *Grouping - What are the related objects that should be collected along with your target
    *Install - How do you want the installation to be done
    *Collection mode - Whether collection should be automatic or not
    Please check what type of grouping you have used while you tried to install the specified object.
    (NOTE 1: I believe that if you use grouping as "dataflow before"  or "only neccessary objects" you will not get this error for Infoobject installation
    NOTE 2: This error might have shown since this DSO 0RF_DS02 would have not been installed from BI content yet and would have been collected when you collected the related objects of the 0material with "dataflow after or before and after")
    Hope it helps.
    Warm Regards,
    Preethi R.

Maybe you are looking for