Existing Interface in the system

Hi All
How can I check for existing interface in our system.
cheers
AJ

Hi Prakash
As our company is going to upgrade the sap system from 4.6c to Ecc6, i want to know for the existing interfaces in our production system, wether it is BDC, LSMW , RFC etc.
Mostly is BDC, but I dontknow how to check the existing interfaces.
please guide
cheers
AJ

Similar Messages

An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified

Hello All
I have TMG server installed on windows 2008 R2 64x with 3 network adaptor (Lan,Premiter and External), but for some reason the clients on premiter Network cant get ip addresses from dhcp which located on LAN. i have done
ipconfig /release
ipconfig /flushdns
ipconfig /renew
but no success...... also uninstalled premiter network adaptor and reinstall network adaptor still no success.....getting this error.
An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified
by the way My Lab is based on Hyper-v
any help would be much greatfull
thanks

Hi,
Have you checked the TMG logging?
You could try the troubleshooting steps in the thread below.
http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/an-error-occurred-while-releasing-interface/4261cacb-e924-4d74-a349-4f3b898c27a9
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to know the existing BDC in the system

how to know the existing BDC in the system
cheers
AJ

Hi,
You can check for existing recordings in your system in t-code SHDB. This transaction is also used for recording a transaction and generating a function module or a program from the recording which you can then use in your program. There are no standard existing BDC's as far as I know. Because most of the times the BDC table is filled programitically and then passed to the Call Transaction.
regards,
Advait Gode.

How should I add a new physical network interface to the system?

Hello:
I am about to test my own NIC driver.
I have used add_drv to add my driver.
I have assigned an IP address to the sytem in the /etc/hosts file and corresponding network mask in the /etc/netmasks file, too.
But when I tried to ping this IP address, it reported an error message saying"ICMP Host Unreachable from gateway localhost .....".
I wonder if the system knows this physical network address.
Does this have something to do with the /etc/hostname.* file?
If this is the case, what should I name the "*" part of this file?
Any advice will be appreciated.
Steven

Hello Shridhar:
Thanks for your kindly reply.
I just noticed that the system would try to plumb the interface during the booting process but failed with a error saying "ifconfig:plumb:XXXX:Bad file number", where XXXX is the * part of /etc/hostname.*
Does not mean I have assigned a illegal interface name to this interface?
It seems that man page doesn't contain any information about error messages.
I use the form XXX0, where XXX is the name of the NIC driver.
Any advice will be appreciated.
Steven
You should plumb the interface and bring it up with
the ifconfig command. Do a man on ifconfig for more
details. What was the add_drv command used ? Based on
your driver's name, you can setup the hostname.*
file's name to automatically setup and initialize the
NIC inetrface everytime the system boots up.
HTH
shridhar

Invoices can be parked against any existing PO in the system

HI Experts,
When creating park document. It is allowing for different PO.
Vendor A PO no: 1
Vendor B PO no: 2
In F-63 system allowing us to give PO no 2 for Vendor A and also PO no 1 to Vendor B. When PO no 1 is given, it will not allow to post Vendor B and vice versa.
Thanks in Advance.
Regards,
Srinivas Muthyala

Hello Srinivas,
While posting manual FI documents, system does not control duplicate records for PO's + vendors. So If you want to make control like this, you can use Business transaction event for validation. Because standart FI validations do not work while parking document.
I checked, 00002218 business transaction event working correctly for this action. If you never use BTE, I will explain to you step by step.
Regards,
Burak

Same customer entry exists already in the system?

Hello
I am creating a new customer from my Z prog.
But, i need to check for duplications upon (legal) name, address, bank details, VAT number, is there any standard SAP function module/BAPI/Class?
Thank yop

Did you try the BAPI "BAPI_CUSTOMER_FIND". Fill in the SELOPT_TAB with required table name and field names, and if your result tab returns null value then there is no duplicate customer.
Edited by: Suresh Karri on Oct 13, 2011 4:03 PM

How to find if a program really exists in the system?

Hi,
I want to find the existing programs in the system by an abap program. Which table should I use? TADIR or TRDIR? I have seen that there can be cases like a program doesn't exist in the system (se38 says so) but there is an entry in TADIR table.
What about trdir? Should I use TRDIR?
Thanks in advance..
MERAL

Thanks for your replies but my main problem is :
" I have seen that there can be cases like a program doesn't exist in the system (se38 says so) but there is an entry in TADIR table." .
In order to find an abap program really exists in the system, I plan to look at both tables, tadir and trdir, and if I find the program in both tables, I will decide that it really exists.
Is it a right approach? What do you think?

The install has detected that the primary IP address of the system is DHCP

While trying to install Oracle 10g R2 on RHEL 5.4, I got following error during "Checking Network Configuration requirements"
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
Can any one please help me resolving it. Thanks in Advance

Nimish Garg wrote:
during the installation configure the host to be localhost; 127.0.0.1please explain how and what is the effect ??
also i wanted to know if I ignore this DHCP related warning, what will be the impact after installation on Oracle Software & DatabaseThe impact will be as in the warning that it gave you ... oracle will not function properly.
It really doesn't matter if the server is "production" or not. A server needs a fixed IP adddress. The IP address is how other computers (and in some cases, processes on the same computer) locate the server. If the addess is DHCP, then you can never know what the address is because it can change. It would be like you changing your telephone number or email address every day, and still expecting people to be able to contact you.
127.0.0.1 (aka 'localhost) is a fixed address, but it is also non-routable, which means no other machine will be able to contact this one by using that address. Every computer on the planet has that address. It means "me, myself, and I". A request to that address never leaves the machine from which the request originated.
You stated earlier that "DHCP can't be changed to Static IP", but why not? Why can't your network guys allocate you a fixed IP address?

"The interface name given does not specify a valid and existing interface."

Hi nice guys,
I'm trying to use the XNET APIs to set Master task to Slave with LIN protocol. As I have no Experience before, there's something problem like the Interface of the NI USB-8476S can't be detected. The prompted windows presents following infomation:
Error -1074384758 occurred at XNET Create Session (Signal Output Single-point).vi:1
Possible reason(s):
NI-XNET: (Hex 0xBFF6308A) The interface name given does not specify a valid and existing interface. Solution: Use a valid and existing interface. These can be obtained using MAX, XNET system properties, or the LabVIEW XNET Interface IO name. If you are using CompactRIO, refer to the topic "Getting Started with CompactRIO" in the NI-XNET Hardware and Software Help.
but in the NI MAX, the device is detected as "LIN0". Even the interface input control in the NI examples shows the error. But if I take the CAN Frame API, it works well.
Does anyone have some idea. I'm so preciate. Tanks in advance.
best regards
Melo

Melonetern,
When do you receive these errors? Does this happen when you try to run your code or our examples? On top of that, does this error happen immediately or does it take a while? Is this happening in LabVIEW or another interface?
If you could give us the versions of software you are using as well as the XNET driver versions that would be very helpful.
Matt J
Professional Googler and Kudo Addict
National Instruments

How to trigger the interface in target system to load the data automaticall

Hi Friends,
This is proxy to file interface. My requirement is to trigger the interface in target system to load the data automatically. For ex: if you are sending a customer data file "/exe_test/custd.dat then the trigger file should be created as /exe_test/custd.trg. How do we actually create this trigger file?
Thanks in advance,
Prathibha.

Hi Prathibha,
File (Trigger) -> BP
BP <-> ABAP server proxy (synchronous)
BP -> File
is one and the standard alternative. Just make your interface synchronous, add a msg type for the request (i think you need only one field), take the existing for the response. Regenerate your proxy.
Alternative 2 would be:
File (Trigger) -> ABAP server proxy (asynchronous)
ABAP server proxy calling a ABAP client proxy
ABAP client proxy -> File (asynchronous)
You avoid using BPM, what can be an advantage of huge traffic (performance). This solution has a worse value for the future, because a person, who did not developed the process wouldnt see that the both messages belong together.
Regards,
Udo

The system could not find a javax.ws.rs.ext.MessageBodyWriter or a DataSourceProvider class for the com.rest.assignment.EmpBean type and application/json mediaType. Ensure that a javax.ws.rs.ext.MessageBodyWriter exists in the JAX-RS application for the

Hi,
Im trying to create a Rest WS with a @GET method that will return me an Emp object. I need the output as a JSON string.
I have created a dynamic web project and added javax RS jars:
When im trying to run this, i'm getting the below mentioned error:
FlushResultHa E org.apache.wink.server.internal.handlers.FlushResultHandler handleResponse The system could not find a javax.ws.rs.ext.MessageBodyWriter or a DataSourceProvider class for the com.rest.assignment.EmpBean type and application/json mediaType. Ensure that a javax.ws.rs.ext.MessageBodyWriter exists in the JAX-RS application for the type and media type specified.
RequestProces I org.apache.wink.server.internal.RequestProcessor logException The following error occurred during the invocation of the handlers chain: WebApplicationException (500 - Internal Server Error)
Please help as im stuck with this from long.
Thanks in advance.
Below is the code for my service class:
package com.rest.assignment;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.util.Enumeration;
import java.util.HashSet;
import java.util.Properties;
import java.util.Set;
import javax.ws.rs.GET;
import javax.ws.rs.Path;
import javax.ws.rs.Produces;
import javax.ws.rs.core.Application;
import javax.ws.rs.core.MediaType;
import javax.ws.rs.core.Response;
@Path("/restService")
public class RestService extends Application {
    @GET
    @Path("/getEmpDetails")
    @Produces(MediaType.APPLICATION_JSON)
    public Response getStringResponse()
        EmpBean empBean = new EmpBean();
        String filePath = "C:/Program Files/IBM/workspace/HelloWorld/src/com/rest/resources/EmpData.properties";
        Properties properties = new Properties();
        try {
            properties.load(new FileInputStream(filePath));
        } catch (FileNotFoundException e) {
            e.printStackTrace();
        } catch (IOException e) {
            e.printStackTrace();
         Enumeration e = properties.propertyNames();
         String result="";
        String[] empDetailsArr;
        while (e.hasMoreElements()) {
          String key = (String) e.nextElement();
          String empDetails = properties.getProperty(key);
          empDetailsArr=empDetails.split(",");
          empBean.setFirstName(empDetailsArr[0]);
          empBean.setLastName(empDetailsArr[1]);
          empBean.setEmpId(empDetailsArr[2]);
          empBean.setDesignation(empDetailsArr[3]);
          empBean.setSkillSet(empDetailsArr[4]);
          result = empDetailsArr[1];
        //return empBean;
        return Response.ok(empBean).type(MediaType.APPLICATION_JSON_TYPE).build();
    @Override
    public Set<Class<?>> getClasses() {
        Set<Class<?>> classes = new HashSet<Class<?>>();
        classes.add(RestService.class);
        classes.add(EmpBean.class);
        return classes;
and my empBean goes like this:
package com.rest.assignment;
public class EmpBean {
    private String firstName;
    private String lastName;
    private String empId;
    private String designation;
    private String skillSet;
    public String getFirstName() {
        return firstName;
    public void setFirstName(String firstName) {
        this.firstName = firstName;
    public String getLastName() {
        return lastName;
    public void setLastName(String lastName) {
        this.lastName = lastName;
    public String getEmpId() {
        return empId;
    public void setEmpId(String empId) {
        this.empId = empId;
    public String getDesignation() {
        return designation;
    public void setDesignation(String designation) {
        this.designation = designation;
    public String getSkillSet() {
        return skillSet;
    public void setSkillSet(String skillSet) {
        this.skillSet = skillSet;
Web.xml goes like this:
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="3.0" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd">
<display-name>restWS</display-name>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>REST</servlet-name>
<servlet-class>com.ibm.websphere.jaxrs.server.IBMRestServlet</servlet-class>
<init-param>
   <param-name>javax.ws.rs.Application</param-name>
   <param-value>com.rest.assignment.RestService</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>REST</servlet-name>
<url-pattern>/rest/*</url-pattern>
</servlet-mapping>
</web-app>
When i try to return a string from my get method, it gives me a proper response. i get this exception when im trying to return a JSON response.

Hi,
Im trying to create a Rest WS with a @GET method that will return me an Emp object. I need the output as a JSON string.
I have created a dynamic web project and added javax RS jars:
When im trying to run this, i'm getting the below mentioned error:
FlushResultHa E org.apache.wink.server.internal.handlers.FlushResultHandler handleResponse The system could not find a javax.ws.rs.ext.MessageBodyWriter or a DataSourceProvider class for the com.rest.assignment.EmpBean type and application/json mediaType. Ensure that a javax.ws.rs.ext.MessageBodyWriter exists in the JAX-RS application for the type and media type specified.
RequestProces I org.apache.wink.server.internal.RequestProcessor logException The following error occurred during the invocation of the handlers chain: WebApplicationException (500 - Internal Server Error)
Please help as im stuck with this from long.
Thanks in advance.
Below is the code for my service class:
package com.rest.assignment;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.util.Enumeration;
import java.util.HashSet;
import java.util.Properties;
import java.util.Set;
import javax.ws.rs.GET;
import javax.ws.rs.Path;
import javax.ws.rs.Produces;
import javax.ws.rs.core.Application;
import javax.ws.rs.core.MediaType;
import javax.ws.rs.core.Response;
@Path("/restService")
public class RestService extends Application {
    @GET
    @Path("/getEmpDetails")
    @Produces(MediaType.APPLICATION_JSON)
    public Response getStringResponse()
        EmpBean empBean = new EmpBean();
        String filePath = "C:/Program Files/IBM/workspace/HelloWorld/src/com/rest/resources/EmpData.properties";
        Properties properties = new Properties();
        try {
            properties.load(new FileInputStream(filePath));
        } catch (FileNotFoundException e) {
            e.printStackTrace();
        } catch (IOException e) {
            e.printStackTrace();
         Enumeration e = properties.propertyNames();
         String result="";
        String[] empDetailsArr;
        while (e.hasMoreElements()) {
          String key = (String) e.nextElement();
          String empDetails = properties.getProperty(key);
          empDetailsArr=empDetails.split(",");
          empBean.setFirstName(empDetailsArr[0]);
          empBean.setLastName(empDetailsArr[1]);
          empBean.setEmpId(empDetailsArr[2]);
          empBean.setDesignation(empDetailsArr[3]);
          empBean.setSkillSet(empDetailsArr[4]);
          result = empDetailsArr[1];
        //return empBean;
        return Response.ok(empBean).type(MediaType.APPLICATION_JSON_TYPE).build();
    @Override
    public Set<Class<?>> getClasses() {
        Set<Class<?>> classes = new HashSet<Class<?>>();
        classes.add(RestService.class);
        classes.add(EmpBean.class);
        return classes;
and my empBean goes like this:
package com.rest.assignment;
public class EmpBean {
    private String firstName;
    private String lastName;
    private String empId;
    private String designation;
    private String skillSet;
    public String getFirstName() {
        return firstName;
    public void setFirstName(String firstName) {
        this.firstName = firstName;
    public String getLastName() {
        return lastName;
    public void setLastName(String lastName) {
        this.lastName = lastName;
    public String getEmpId() {
        return empId;
    public void setEmpId(String empId) {
        this.empId = empId;
    public String getDesignation() {
        return designation;
    public void setDesignation(String designation) {
        this.designation = designation;
    public String getSkillSet() {
        return skillSet;
    public void setSkillSet(String skillSet) {
        this.skillSet = skillSet;
Web.xml goes like this:
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="3.0" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd">
<display-name>restWS</display-name>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>default.html</welcome-file>
<welcome-file>default.htm</welcome-file>
<welcome-file>default.jsp</welcome-file>
</welcome-file-list>
<servlet>
<servlet-name>REST</servlet-name>
<servlet-class>com.ibm.websphere.jaxrs.server.IBMRestServlet</servlet-class>
<init-param>
   <param-name>javax.ws.rs.Application</param-name>
   <param-value>com.rest.assignment.RestService</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>REST</servlet-name>
<url-pattern>/rest/*</url-pattern>
</servlet-mapping>
</web-app>
When i try to return a string from my get method, it gives me a proper response. i get this exception when im trying to return a JSON response.

I looked at system.log in the system profiler today and see lots of activity at 2 a.m. when I was fast asleep, should I worry? It seems to reset hostname and mentions frequent transitions for interface, looks weird to me (I'm not a teckie!)

I looked at system.log in the system profiler today and see lots of activity at 2 a.m. when I was fast asleep, should I worry? It seems to reset hostname and mentions frequent transitions for interface, looks weird to me (I'm not a teckie!)
This is a section:
May 12 02:05:10 wendy-drapers-macbook configd[14]: setting hostname to "wendy-drapers-macbook.local"
May 12 02:05:29 wendy-drapers-macbook kernel[0]: Auth result for: 00:26:44:14:17:a3 MAC AUTH succeeded
May 12 02:05:29 wendy-drapers-macbook kernel[0]: AirPort: Link Up on en1
May 12 02:05:29 wendy-drapers-macbook mDNSResponder[16]: Note: Frequent transitions for interface en1 (192.168.1.92); network traffic reduction measures in effect
May 12 02:05:29 macbook configd[14]: setting hostname to "macbook.lan"
May 12 02:05:31 macbook mDNSResponder[16]: Note: Frequent transitions for interface en1 (FE80:0000:0000:0000:021E:C2FF:FEB3:1A3E); network traffic reduction measures in effect
May 12 02:05:34 macbook com.apple.launchd[1] (org.samba.nmbd): Throttling respawn: Will start in 5 seconds

I've been seeing messages exactly like that (and many, many other kinds) in the Console since the first version of OS X. They look menacing but are harmless.
You don't need any kind of security software.
Just surf the web carefully, pay attention to where you're going and don't install anything that you don't recognize. If you are asked to enter an admin user name and password, DON'T. Unless you know for sure that you initiated the installation from a known and reliable source (like Apple).
Mac malware relies on social engineering. No amount of security/anti-virus, blah, blah, blah software is going to help.

The Web application at could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application

Hi,
I have created on windows service to fetch sharepoint list ad update the list items.
when i run this service in sharepoint server(where the sharepoint site is hosted),it is working fine. If i run the same service in another machine(sharepoint installed in this machine also). it is giving the below error
The Web application at [URL] could not be found. Verify that you have typed the URL correctly. If the URL should be serving existing content, the system administrator may need to add a new request URL mapping to the intended application.
Code snippet
SPSite sharepointSite = null;
            SPWeb rootWeb = null;
            try
                //SPList current = null, previous = null;
                string colmId = ConfigurationManager.AppSettings[ID_COLM];
                List<TaskEntity> list = new List<TaskEntity>();
                sharepointSite = new SPSite(URL);
                rootWeb = sharepointSite.OpenWeb();
                SPList current = rootWeb.Lists[ConfigurationManager.AppSettings[OMEGA_REGISTRATION_LIST]];
                WriteEventLog("current" + current.Items.Count.ToString());
            catch (Exception ex)
                ExceptionMethod(ex);
            finally
                sharepointSite = null;
                rootWeb = null;
I have pointed .net framework to 3.5 version and target palform as Any CPU. Please suggest me

Hi mallela1,
I also had similar issue couple of months back when I was trying to access a remote URL from a Windows service when the site does not exists in the server where service resides.
You cannot access a remote url (even though it is SharePoint server and also in same network ) from server object model.
SPSite can look in the current server only. here what is happening is SPSite will look for this in the current server DB and it is not finding this errror.
So please dont use ServerObject model for accessing remote sites. You can use Client Object model for the code /requirement you have stated above.
I wasted lot of time in finding a work around to make to work. It did not. So look for other options.
Regards,
Nandini

How to check if a user exists in the system ?

Dear Gurus,
I want to check whether a user ID exists in the system after logon by using VBA. If the user ID exists, then I will update the user's information with external data by using the method user.change.
When running below codes, error occurs and error msg is: "The persistent key for an business object instance of type USER has not been set. Cannot invoke method EXISTENCECHECK"
How can I do to check the user ID existence ?
Set oUser = oBAPICtrl.GetSapObject("user")
oUser.ExistenceCheck "MyUserID", return:=oReturn
Thanks and Regards,
Bao Yan

Mickey,
I'm afraid I never did get this to work properly. However, in the way of all bad/good (delete as appropriate) programmers eveywhere I worked around this problem. I was using this code in Banner.asp to change the view based on the user group so if a given session variable was set a user would see a different view. It works fine with no slow down on the page and you should be able to adapt it to what you need.
Hope this helps.
Neville
Note: Application variables are ones I have defined in config.xml.
Code follows:

<% 'NAH 29/03/2004 ' 'This check the to see if the current user has the group in their membership that has been defined as the group to provide an alternative view of the portal.' 'The group variable is defined in the config.xml as "ALTVIEWGROUP"'
'Do not do this is we have already matched the group'If Session("groupMatch") <> "1" and Session("groupMatch") <> "2" then
Dim pGroup
pGroup = Application("ALTVIEWGROUP") Set Session("groupMatch") = nothing
Dim Plumtree
Set Plumtree = Server.CreateObject("ADODB.Recordset") Plumtree.ActiveConnection = "Driver={SQL Server};Server=" & Application("DBSERVER") & ";Database=" & Application("PLUMTREEDB") & ";" Plumtree.Source = "SELECT GROUPID FROM " & Application("PLUMTREEDBUSER") & ".PTGROUPMEMBERSHIP WHERE (USERID = " & strUserID & ") AND (GROUPID = " & pGroup & ")" Plumtree.CursorType = 3 Plumtree.CursorLocation = 2 Plumtree.LockType = 1 Plumtree.Open()
'If there are records we should have a match otherwise set the session varible to no match.' If Plumtree.EOF then Session("groupMatch") = "2" Else 'By getting here the user should have the matching group but complete one final check to make sure' If cInt(Plumtree.Fields.Item("GROUPID").Value) = cInt(pGroup) then Session("groupMatch") = "1" Else Session("groupMatch") = "2" End If
End If
Plumtree.Close() Set Plumtree = Nothing
End if%>

Trip country IN / trip region do not exist in the system (T702O)

Hi Experts,
While creating Travel request in TCode TRIP I am getting this error"Trip country IN / trip region do not exist in the system (T702O)"
But the table T702O does not exist when i checked in SM30. Can u please tell me how to solve this error.
Thanks and Regards,
Shilpa

Hi Shilpashree,
I am also facing the same problem. I maintained T702O table, schema & V_T706O. But still facing the same problem.
Please help to sort the issue. Even i had followed some of the SDN links:
Trip country IN / trip region do not exist in the system (T702O)"
Re: Trip country IN / trip region do not exist in the system (T702O)
Error while Creating Travel Request ..thru TRIP
Thanks in Advance

Existing Interface in the system

Similar Messages

Maybe you are looking for