Existing MDG Analytics Application

Hi all,
What is the difference between the Existing MDG Analytics Application and the Smart Business for SAP Master Data Governance ?
Are both one in the same? Why should we go for the Smart Business for SAP Master Data Governance ?
Shruti

Smart Business is an innovation that adds many features to the existing Data Analytic reports. First, it utilizes the power of HANA. Second, the Smart Business dashboard contains many different KPI's that you can view on the fly without having to explicitly execute reports.

Similar Messages

Installating additional BI Analytics Applications

Supposing that you have a running Oracle Business Intelligence Applications install with Financial Analytics Applications (7.9.6.1). Thus, the installed module was Financial Analytics and the database schema and the OBIEE RPD were created for Financial Analytics.
If you need to install HR Analytics into the same database, how do you go about doing it ?
The Oracle Business Intelligence Applications installation documentation does not seem to explain how to install a new module into an existing environment.
Hemant K Chitale

Several things to keep in mind..the SB schema (tables, etc) is not specific to any module..it should install the DB schema and tables for all module (FIN, HR..etc). However, if you only ran the ETLs for Financials Subject Area..then only those tables will be populated. So with regard to DB you should be fine. Second, the DAC can be configured to run additional subject areas. So for instance, if you want to runa HR on top of Financials, you can simply configure the HR subject areas in the DAC and reassemble the subject area and rebuild the execution plan. Also, note that BI Apps has conformed dimensions..which means that tables are shared across subjct areas..so its best to run the loads together. Regarding the RPD, I assume you can "enable" or install the HR objects just like you did for Financials.
If this is helpful, please mark the respone as correct or helpful.

Calendar Analytics application won't install with MS Office 2013 on PC

I use Calendar Analytics, a Microsoft approved application, to analyze Outlook Calendars for utilization rates within my facility. It has worked well for me for several years. Since I
upgraded to Microsoft Office 2013, I cannot get Calendar Analytics to install on my PC. I receive an error message stating Office Shared Tools is required and I should run Office 2010 setup to install Office Shared Tools.
Please assist me in locating a way to resolve this issue either by installing the required version of Office Shared Tools or installing a compatible Outlook Calendar Analytics application
which will provide utilization information from Outlook calendars.
Benny

Hi Benny,
The Calendar Analytics Tool allows users to connect to their Microsoft Exchange Calendar and get dashboard views on meeting statistics inside Microsoft Office Excel 2010.
Therefore, to use this tool, please note that Calendar Analytics works only with the latest versions of Microsoft® Excel 2010 and of Microsoft PowerPivot for Excel 2010. To download Microsoft PowerPivot for Excel 2010, please go to
www.PowerPivot.com.
For more information about this tool, please refer to the System Requirements part in the following article:
http://www.microsoft.com/en-hk/download/details.aspx?id=20898
Thanks,
Winnie Liang
TechNet Community Support

Receive message when downloading ITunes or Safari for Windows 7 64 Bit. "Installation package could not be opened. Verify package exists or contact application vendor to verify this is a valid Windows Installer package."

Received message when trying to install Itunes or Safari for Windows. " Installation package could not be opened. Verify package exists or contact application vendor to verify this is a valid Windows Installer package".

I to am having the same issue. I have a admin account and logged into it as well and still have the same message pop up. Contacted live support the woman i spoke with had to send it up higher. We went through every thing including her trying (taking over as a host on my laptop) still have not bee contacted this June will be a year that i have heard nothing from them sine She di everything she could and pushed it up higher.

I have a button in JSP page inside an UIWebView by pressing the button i want to run another existing iPhone native application in background only.Do anyone have a solution for this.

I have a button in JSP page inside an UIWebView by pressing the button i want to run another
existing iPhone native application in background only.Do anyone have a solution for this.

Sounds like a virus.... I hope it's not...
Launching Other Apps within an iPhone

Error Opening Reports (Cannot find Dimension Scenario, Error executing query: the member null doesn't exist in this application)

Hello,
two of our users get the following error message, when opening two specific reports:
First Report: Cannot find Dimension Scenario.
Second Report: Error executing query: the member null doesn't exist in this application.
Other users can access these reports, and the same users where the problem occurs can access other reports in the same folder.
I set the same rights for me, but i can access the reports without problems.
Somebody encountered the same problem before?

Hi there,
I had the same issue a few weeks ago... not sure how it happened but it was related only with my username.
In order to fix it:
1. I created a report which does not require to select the scenario in advance. Try to use the default data-grid that you get when you first create a report for example.
2. When the user runs the report, try to see if he can see the dimension. Do not use the missing dimension on rows or columns. If he can see the dimension, ask him to select one scenario. This will solve the issue.
3. If he cannot see the dimension, try to change the layout of the report.
Regards,
Thanos

WDA Error : An instance of popup view already exists in the application

Dear Experts,
I have used a popup in my WDA application which gets opened on the click of the button. Whenever the application is launched for the first time and when I click on the button to display the pop up I get the error "An instance of popup view already exists in the application"; when I close the application, relaunch it once again and click on the button to open the popup, it works fine. What would be the reason for this behaviour?
My piece of code is as follows,
try.
      lo_api_component = wd_comp_controller->wd_get_api( ).
      lo_window_manager = lo_api_component->get_window_manager( ).
                    CALL METHOD lo_window_manager->CREATE_WINDOW
                      EXPORTING
                        WINDOW_NAME       = 'POP_UP_QOH'
                        TITLE             = 'Stock Overview'
                        BUTTON_KIND       = IF_WD_WINDOW=>CO_BUTTONS_OK
                       MESSAGE_TYPE      = IF_WD_WINDOW=>CO_MSG_TYPE_NONE
                       CLOSE_IN_ANY_CASE = ABAP_TRUE
                      RECEIVING
                        WINDOW            = LO_WINDOW
                    CALL METHOD LO_WINDOW->OPEN
             CATCH CX_WDR_RT_EXCEPTION.
ENDTRY.
Kindly please help to resolve the issue.
Warm Regards,
Kanthimathi

Hi Viji,
I now changed my piece of code as follows,
if lo_window is initial.
lo_api_component = wd_comp_controller->wd_get_api( ).
      lo_window_manager = lo_api_component->get_window_manager( ).
                    CALL METHOD lo_window_manager->CREATE_WINDOW
                      EXPORTING
                       MODAL             = ABAP_FALSE
                        WINDOW_NAME       = 'POP_UP_QOH'
                        TITLE             = 'Stock Overview'
                       CLOSE_BUTTON      =
                        BUTTON_KIND       = IF_WD_WINDOW=>CO_BUTTONS_OK
                       MESSAGE_TYPE      = IF_WD_WINDOW=>CO_MSG_TYPE_NONE
                       CLOSE_IN_ANY_CASE = ABAP_TRUE
                      RECEIVING
                        WINDOW            = LO_WINDOW
                    CALL METHOD LO_WINDOW->OPEN
endif.
but still facing the same problem. By the way what does the message type argument mean here?
Regards,
Kanthimathi

Unable to execute existing Design Studio applications from BI Launchpad after updating to 1.4!

Hello Experts,
We upgraded our SAP BO from 4.0 to SAP BO 4.1 SP5 and also updated our Design Studio from 1.2 directly to 1.4.
Upon testing the existing application in Design Studio it so happens that the existing application is sucessfully executed in local mode. However it does run from the BI Launchpad.
I tried creating a new application in Design Studio 1.4 whick works fine in both local and BI launchpad but my previous created application in 1.2 (now loaded in Design Studio 1.4) should also work, I don't know the reason why it dosen't work.Need help on how to proceed further.
Attached is the error which I get when ezecuting application in BI Launchpad.
Reply Awaited.
Best Regards,
Niyati S.

Hi Tammy,
Sorry none of the mentioned steps get synced with my situation since I have no problem executing new applications from BI Launchpad but only my old ones.
I read the article http://scn.sap.com/community/businessobjects-design-studio/blog/2014/11/26/ds-14-server-installation and it mentions just smooth execution of existing Design Studio application after updating to 1.4. Wish that would have been the case with me too!
Looking forward to finding solution of the problem.
Regards,
Niyati S.

After going online with an existing 3.0 application with ver 3.2 configurator all comms stopped

After going online with an existing 3.0 application with ver 3.2 configurator all comms stopped.
Hardware 1788-CN2FF

Could you give some clue more detailedly?
What you did? any errors?
Ryan Shi
National Instruments

Installing OBIA 11g - stuck at Business Analytics Applications Suite RCU

Hi.
I'm installing OBIA 11.1.1.7.1 in windows machine and the database is in linux server. I've completed till ODI installation. While running Business Analytics Applications Suite RCU installer, i got stuck in custom variables (step 5 of 8).
I have created directories in the database server and copied the dump files to the respective directories.
For Custom variable value, i have tried entering the directory name and the directory path for each component. But it runs for a long time(more than 3hrs) and doesn't go to the next step.
Please help me to resolve this issue. Also please let me know if i have missed something.
Thanks.

Hi Haree,
It depends on your db if the network connectoin(remote) is poor it may take more than 30mins
You can refer : http://www.varanasisaichand.com/2013/06/biapps-111171-installation-and.html
http://www.varanasisaichand.com/2013/06/biapps-111171-fusion-middleware-patches.html
thanks,
Saichand

Siebel 7.7 Analytics Applications Developer Exam

I am interested in getting certified in Siebel Analytics (Developer, Server etc). But i got trained by non-oracle institute. Is it possible for me to go for this exam?.
Since Oracle is stressing that everyone should undergo training through Oracle training institue. Is this rule still in force?
Thanks

Christian Berg wrote:
[http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=165&p_org_id=28&lang=US]
From the official page, you can see that 1Z0-620 is required to be able to pass the certification. "Analytics: Application Developer(Siebel 7.7)" and "Analytics: Advanced Application Developer(Siebel 7.7)" are recommended but not required to pass this exam (or the OBIEE/A equivalents). So theoretically you can go for the certification as soon as you've completed 1Z0-620.
Cheers,
C.That's not how I've read the information on this page. It also states +"Due to the decreasing availability of the Siebel 7.7 Analytics courses, Oracle Certification will accept the Oracle BI courses toward Analytics certification. However, please remember that the Siebel 7.7 Analytics courses remain the best way to prepare for these exams and Oracle BI courses may not sufficiently help prepare candidates."+
This means to me, that you must have either followed the Siebel Analytics courses or at least one of the new Oracle BI courses (from Oracle University of course) to get certified.

How can I port an existing Tomcat (JSP) application in SAP Netweaver 2004s

Hi All,
I want to port an existing JSP application (using Tomcat as Web server) in SAP Web AS 6.40.
Please any one suggest me.
Eagerly looking forward to your reply......
Thanks and Regards
Avijit Dhar

Hi,
The maximum number of work processes depends on several things like the below.
1) Majorly on Your primary Memory
2) Hardware capacity
3) Operating systems
4) SAP version as well...
You need to calculate the work processes with your primary memory.
Every work process should take 150 mb space on memory.. so you need to increase the work processes that should be campatible with your primary memory.
And please read the OSS notes as suggested by our frnds then go ahead with your rquirement.
-Srini

Facing Problem while adding Azure Project to existing C# web application

Hi,
I have a web application with 5 projects under one Solution. I want to publish this web application on Windows Azure, for that I have tried to add Windows Azure Cloud Service Project but this option is not appear in option list. But when I create new web
application add Windows Azure Cloud Service Project option appeared. I didn't understand why this happened. I have also tried to migrate old code to new project but having error
" The type or namespace name 'DataAnnotations' does not exist in the namespace 'System.ComponentModel' (are you missing an assembly reference?)"
If I add this dll then more than 18000 error occures like control not found(The name 'lnkbtnNew' does not exist in the current context).
Please help me out, I am struggling since couple of days.
Thanks in advance.

Hi,
Please try the following steps, see if it helps.
1. create new azure cloud service project (it is better to choose the same version of .netframework with your web application );
2. right click the solution, add your web application as Existing Project
3. Right click on the “Roles” node in the Cloud Service project and select “Add | Web Role Project in solution…”
Please try to set the “Copy Local” to “True” in order to avoid assembly missing issue, see more at:
http://blogs.msdn.com/b/asiatech/archive/2013/01/09/how-to-resolve-the-could-not-load-file-or-assembly-issues-on-windows-azure-web-sites.aspx
If this post doesn't give you help, please follow up with more detailed information.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to invoke ADF custom application from existing R12 EBS application

Hi Guru's,
We have a requirement to invoke ADF custom application from existing EBS R12.1.3 application.
Is there any documentation provided by ORACLE or any online help on how to integrate/invoke ADF pages from existing EBS application?
And can we pass any EBS session level parameters like(user info, language, operating unit etc) to ADF layer while invoking the ADF application?
I have thoroughly searched the forums and got some info related to JAAS security links and all. but i am looking for exact integration specific steps.
Any help in this regard is a great help!!
Thanks alot for your help!!
Subba.

lets raise your question over here
JDeveloper and ADF
Thanks
vamshi.

How to check if the file already exists in the application server directory

Hi all. I'm on devsuite 10g.
I transfer file from local machine to application server using webutil function webutil_file_transfer.client_to_as and I want to check if the file I'm transfering already exists on the server directory.
How can I make this?
Thanks all,
Fabrizio

use the text_io package and open the file in read-mode.
like this
declare
xFileType text_io.file_type;
begin
xFileType := text_io.fopen('c:\temp\test.txt','R'); --file on the middle tier
-- file exists;
text_io.fclose(xFileType);
exception
when others then
--file doesn't exist
end;
regards
Christian

Existing MDG Analytics Application

Similar Messages

Maybe you are looking for