Existing pictures from PC not displayed in Ovi - a...

I have pictures taken using various devices over the years stored on my PC and want them all to show up in Ovi.
One such directory which I cannot make appear is at:
C:\Users\Peter\Documents\My Multimedia\My Pictures\2000-04
I renamed the directory especially to conform to the Ovi naming convention to eliminate that as being the problem.
One of the images inside the folder is named:
04022000001.jpg
which also conforms with the Ovi naming convention, but when I refresh the view in Ovi, it is still not shown.
The path for photos in Options > Photos is set to:
C:\Users\Peter\Documents\My Multimedia\My Pictures
and I even added an extra watch folder below with the full path of one of the folders which it won't display:
C:\Users\Peter\Documents\My Multimedia\My Pictures\2000-04
but it still doesn't display the contents.
The odd thing is that a picture with the following path is displayed perfectly!:
C:\Users\Peter\Documents\My Multimedia\My Pictures\Pictures but not personal photos\Evidence-Proof\pope.jpg
This is annoying, as I'm hoping to use Ovi to host the pictures that I want to share, but I don't want to have one solution for current pictures and another for legacy pictures. Can anyone tell me what I'm doing wrong please?
Thanks.
My phone is an E72.
OS: Windows 7 Ultimate 32bit
Ovi Suite: 3.0.0.284

In OVI Suite..Under Photos.. goto ADD File to Library / Folder to Library(as applicable) -->select the corresponding File / Folder on the PC... and then check..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Similar Messages

"From" presence not displaying in Outlook 2010

I've been working on a software product aiming presence and im integration with Microsoft Outlook using IMessenger API.
Integration works as expected with Outlook 2013. However, the presence indicator of the
"from" or sender does not display in Outlook 2010. The to, cc and bcc fields all display presence properly. In Outlook 2013 however, all of the from, to, cc and bcc fields display presence.
There is a similar discussion for Outlook 2013 on:
http://social.technet.microsoft.com/Forums/office/en-US/a2500fec-fc3f-4295-bbe3-7620876a2d24/from-presence-not-displaying-in-outlook-2013
My problem is similar to this one except that I've the same problem with Outlook 2010 and I don't have this problem with Outlook 2013. It may be resolved in Outlook 2013 with a hotfix I don't know. Does anybody have the same issue and have a fix or workaround
for this situation? I have latest updates for Office 2010 already.
A strange thing is that when I set the registry value HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Common\IM\TurnOffPresenceIcon to 1, presence indicators are disappear from contact names as expected, however when I hover over the sender it
displays sender's presence correctly on tooltip. So integration seems ok when I look at this.
when I set the registry value HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Common\IM\TurnOffPresenceIcon to 2, presence indicators are disappear from both contact names and tool tips as expected.
when I set the registry value HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Common\IM\TurnOffPresenceIcon to 0, presence indicators are appear for contacts in to, cc, and bcc fields except "from" field, which is quite strange. After
I move around between messages, some of the sender's presence indicators starts displaying.
Does anybody know why the presence indicator is not displaying consistently for the "sender" contact in Outlook 2010 when TurnOffPresenceIcon has value 0? Does anybody have the same issue and have a fix or workaround for this situation?

Hi,
There is another registry value named TurnOffPresenceIntegration
which also have an effect on the presence indicator, please find the
Key in: HKEY_CURRENT_USER\software\microsoft\Office\14.0\Common\IM
or Policy Key: HKEY_CURRENT_USER\software\Policies\microsoft\Office\14.0\Common\IM
and then check if the key value is set to 0.
For more information, please refer:
http://support.microsoft.com/kb/2726007
Regards,
Steve Fan
TechNet Community Support

How do I transfer pictures from Galaxy Note II to Mac computer

How do I transfer pictures from Galaxy Note II to I mac computer

This might help you. http://www.androidcentral.com/android-101-android-file-transfer-app-mac
You might want to check and verify it works with your operating system version on the computer.

Ipad2: pictures transfered from camera, not displayed on my mac (iphoto, itune , phototransfert.....)

Hello communities,
I have a simple issue, I have bought an ipad 2 this summer and transfered the picture from my camera in my device. all was perfect to see each evening the piture daily pictures by using a Diaporama.
Now, I would like transfer the picture to my Mac. But I can't see images when I connect my Ipad elseif I Use Itune ,Iphoto, Image transfert or another applications....
What can I do? All is correct on my ipad , it's like the files are invisible...
Advance thank for your answers.
Regards

Have you tried a reset of the iPad : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. Have you also tried rebooting your Mac ?
Do the photos still show in the Photos app on the iPad ?

Photoshop CS6 content (pictures, etc) will not display (or only partually) on the stage.

I just purchased and loaded Photoshop CS6. Pictures (actually this is for all content in any layers) will not display at all or only partually display (see picture below). I uninstalled and reinstalled the program but there is no change. The other Adobe products from the Master Suite Collection run fine (Flash, Encoder, etc). I am thinking that my instalation disc may be corrupted. Can you give me any advice?

Most likely the video card driver. Update it in GPU makers website. Need make and model of video card.

Updating Contact info from Mail not displaying in Address Book

So I was updating an existing contact from Mail using the data detector feature. Address Book was already running in background. I clicked on the data detector and said "update existing contact". I pick the contact that I want to update. When I go to address book to see if the contact was updated, it "appears" that it hadn't updated. However, if I exit address book and restart the data does appear. So it get's in the database but doesn't display until exit and restart.

After several days of trying, i finally seem to have it working. What i ended up doing was exporting my backing up my addresses on another computer that still had Snow Leopard on it. I exported both as .abbu and vCards. I was then able to get the vCards into iCloud.
Problem was, i could not get them to import into Contacts in Mavericks. I could not even add the iCloud account to contacts. It would let me sign in and choose contacts, but iCloud never showed up in the accounts nor did the contacts show up in Contacts.
After trying repairing permissions and resetting the PRAM to no avail, it occured to me to delete the Address Book folder from /Library/Application Support
Once that folder was gone, i was able to add iCloud to the accounts and import the .abbu file from Address Book.
So if you did not export your Address Book contacts before updating, you will need a second computer that is still running Snow Leopard to export the contacts. Then you can delete the Address Book folder from the Library and you should then be able to import the contacts into Contacts on Mavericks.
Hope this helps.

How do I turn off image/picture from Creative Zen display?

:How do I turn off image/picture/cover art from Creative Zen display?
I wouldn't mind it, but it's almost ALWAYS wrong! Why is that? It seems to pick a random - and I mean random - album cover every time I upload songs. WHAT makes it decide this? I have dance collection cover pics turning up for rock songs!
If someone an help me solve this problem, I don't mind having the images show up.
Thanks!

>Hi,
The album art is usually associated with an album artwork and is supplied together with the music tracks. The player will not display it if there isn't one. You might want to make sure that the album art is linked correctly to the music track.
Refer to this article for details:
http://support.creative.com/kb/showarticle.aspx?sid=879?

"From" presence not displaying in Outlook 2013

When running the Lync 2013 client, the presence indicator of the "From" or sender does not display in Outlook 2013. The cc, bcc & to fields all display presence properly.
When I close the Lync 2013 client and the launch the Lync 2010 client, the sender's or "From" presence displays properly.
We are currently running Lync 2010 servers in our environment.
Just wondering if anyone else has noticed this issue?

I have certainly come across this behaviour with outlook 2013 against Exchange 2007.
How to repro the Issue?
Open an email in Outlook 2013 connected to Exchange
2007 in cached Mode. Sender of the email has empty personcard.
With Outlook 2013, users are not able to see GAL data for the
sender of emails,
Work around seem to be Using online mode instead of cached mode.
There is a outlook fix planned for this issue however unsure on the Release schedule
Hi Prasanth. It's now the end of May. Outlook 2013 went RTM about six months ago and GA about four months ago and this issue is still not fixed. Are Microsoft still working on a fix or have they given up on it and turned their back on their
users ?
I just installed Office 2013 + all MS updates and am very disappointed as Outlook 2013 is functionally inferior to 2010 because of this for us. I work for a large organisation and this would hold back Office 2013 rollout.
-- huddie "If you're not seeking help or offering it, you shouldn't be here."

Pictures from iphoto not available in pictures folder

I have downloded pictures from my camera to iphoto 08. I have events & albums created. When I'm on other websites or even in Word (Office: Mac), I can't attach or insert a picture from here. When I go to my pictures folder, I click on iphoto library & either nothing happens (an iphoto icon comes up, but none of my pictures), or, when I'm in Word, clicking on iphoto library isn't an option (I can only click on photo booth). How can I make my personal pictures available to send as attachments?

There are three ways (at least) to get files from the iPhoto Window.
1. Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. Show File: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
To upload to MySpace or any site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services.
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves. If you're willing to risk database corruption, you can restore the older functionality simply by right clicking on the iPhoto Library and choosing 'Show Package Contents'. Then simply make an alias to the folders you require and put that alias on the desktop or where ever you want it. Be aware though, that this is a hack and not supported by Apple.
Regards
TD

Tiffs from camera not displaying preview

My Panasonic DMC-FZ3 camera takes each photo as both a tiff and a jpeg (it uses the jpeg for display on its built-in lcd). The Finder and Apple apps are having a problem with the tiffs (the jpegs are fine). The finder does not display a preview, and the creation date is blank (could this be the problem?). Any attempt to open the files in Preview or import them into iPhoto gives me an error message saying that the files are either unsupported or corrupted. When I used the camera in October there was no problem with the tiffs created by this camera.
The files open fine in Photoshop, Graphic Converter, several other graphics apps, and even Camino and Firefox. If I edit the files and re-save in one of these other programs, the files will then display a preview, open in Preview, and import into iPhoto, but I shouldn't have to do this time consuming intermediate step.
I do not believe this is a problem with the camera. I pulled out an old SD card with photos over 1 year old that had imported fine last November, but I got the error message when trying to import them this time.
I searched these forums and found others with a similar problem, but none of the advice in those threads worked for my issue. I have tried changing the file name, repairing permissions, changing ownership on the library, and running the daily, weekly and monthly unix maintenance scripts. I even reinstalled iPhoto 5.0.4, but no luck.
I think the problem must be deeper than that, because Preview and Safari also refuse to open the tiffs. With that in mind, I ran the 10.4.3 combo updater, but still no go.
Any suggestions?
PB G4 12 1GHz DVI Mac OS X (10.3.7)

My camera doesn't do RAW, just jpeg and tiff.
I doubt the files are too large. The tiffs are about 8.5mb each, not overly large at all. The 16 bit question doesn't explain why the OS, Preview, and iPhoto had no problems just 4 months ago.
Another poster here traced the problem to OS 10.4.3. He thinks the .4.3 update broke something in the tiff handling ability. I wonder if there is an older library component I could import that would fix this?

Image Coming from URLRequest Not Displaying?

Hi,
I have a main app here with a subclass that is supposed to "send images" based on the "parameters" that sends to a HTTPService.
However, even though the url seems to be generating correctly, I could not see the image. Since my PHP is working fine with the url as shown in the trace statements from my app, I am assuming that there has to be something else that I am missing here.
Below is the code that generates the image, is there something here I am missing?
package map
     import colorize.*;
     import com.zavoo.svg.*;
     import flash.display.Sprite;
     import flash.events.Event;
     import flash.net.URLLoader;
     import flash.net.URLRequest;
     import flash.net.URLVariables;
     import mx.containers.Canvas;
     import mx.core.UIComponent;
    public class SvgMap extends UIComponent {
        public var canvas:Sprite;
        [Embed(source="USA_Counties_with_FIPS_and_names.svg")]
        public var usaMap:Class;
        public var paths:SvgPaths;
        private var patient_from:Array;
        private var drive_time:Array;
        private var drive_distance:Array;
        private var college:Array;
        private var high_school:Array;
        private var income:Array;
        private var population:Array;
        private var countyName:XMLList;
        private var stateColors:Array;
        private var horizontal_bar:Canvas;
    public function SvgMap():void {
                canvas = new usaMap();
                canvas.width = 650;
                canvas.height = 500;
                addChild(canvas);
                trace("Canvas Parent: " + canvas.parent);
    public function passBox(passedBox:Canvas):void{
        horizontal_bar = passedBox;
     public function setParameters(passedArray:Array,passedArray7:Array):void {
            from = passedArray;
            stateColors= passedArray7;
            changeMap(from,stateColors);
        public function changeMap(passedArray:Array,passedArray7:Array):void{
        removeChild(this.canvas);
        canvas = new Sprite();
        canvas.width = 600;
        canvas.height = 500;
        addChild(canvas);
        var from_string:String = from.join("-");
        var state_colors_string:String = stateColors.join("-");
        var loader:URLLoader = new URLLoader();
        var url:String = "http://tdc-queuing/test/generic.php?from=" + from_string + "&state_colors=" + state_colors_string;
        var variables:URLVariables = new URLVariables();
        variables.patient_from= patient_from_string;
        variables.state_colors = state_colors_string;
        var encode:String= encodeURI(url);
        var pattern:RegExp = /#/g;
        var decode:String = encode.replace(pattern,"%23");
        var request:URLRequest = new URLRequest(decode);
        request.method = "GET";
        loader.load(request);
        loader.addEventListener(Event.COMPLETE, onLoadComplete);
        public function onLoadComplete(event:Event):void {
                var loader:URLLoader = URLLoader(event.target);
                paths = new SvgPaths(loader.data);      //the canvas exists
                paths.drawToGraphics(this.canvas.graphics, 2, 10, 10);
Thanks for your help. Anything is appreciated.
Alice

Hi,
For testing purposes, here is the package:
package map
     import colorize.*;
     import com.zavoo.svg.*;
     import flash.display.Sprite;
     import flash.events.Event;
     import flash.net.URLLoader;
     import flash.net.URLRequest;
     import flash.net.URLVariables;
     import mx.containers.Canvas;
     import mx.core.UIComponent;
    public class SvgMap extends UIComponent {
        public var canvas:Sprite;
        [Embed(source="USA_Counties_with_FIPS_and_names.svg")]
        public var usaMap:Class;
        public var paths:SvgPaths;
        private var from:Array;
        private var stateColors:Array;
        private var horizontal_bar:Canvas;
    public function SvgMap():void {
                canvas = new usaMap();
                canvas.width = 650;
                canvas.height = 500;
                addChild(canvas);
                trace("Canvas Parent: " + canvas.parent);
    public function passBox(passedBox:Canvas):void{
        horizontal_bar = passedBox;
     public function setParameters(passedArray:Array,passedArray7:Array):void {
            from = passedArray;
            stateColors= passedArray7;
            changeMap(from,stateColors);
        public function changeMap(passedArray:Array,passedArray7:Array):void{
        removeChild(this.canvas);
        canvas = new Sprite();
        canvas.width = 600;
        canvas.height = 500;
        addChild(canvas);
        var from_string:String = from.join("-");
        var state_colors_string:String = stateColors.join("-");
        var loader:URLLoader = new URLLoader();
        var url:String = "http://localhost/test/generic.php?from=" + from_string + "&state_colors=" + state_colors_string;
        var variables:URLVariables = new URLVariables();
        variables.from= from_string;
        variables.state_colors = state_colors_string;
        var encode:String= encodeURI(url);
        var pattern:RegExp = /#/g;
        var decode:String = encode.replace(pattern,"%23");
        var request:URLRequest = new URLRequest(decode);
        request.method = "GET";
        loader.load(request);
        loader.addEventListener(Event.COMPLETE, onLoadComplete);
        public function onLoadComplete(event:Event):void {
                var loader:URLLoader = URLLoader(event.target);
                paths = new SvgPaths(loader.data);      //the canvas exists
                paths.drawToGraphics(this.canvas.graphics, 2, 10, 10);
And, this is the PHP:
<?php
header("Content-type: image/svg+xml"); //Outputting an SVG
$from = $_GET['from'];
$state_colors= $_GET['state_colors'];
$from = explode("-", $from);
$state_colors= explode("-", $state_colors);
#Load the Map
$ourFileName= "USA_Counties_with_FIPS_and_names.svg";
$fh = fopen($ourFileName, "r") or die("Can't open file");
$contents = fread($fh,filesize($ourFileName));
$lines2= file($ourFileName);
foreach ($lines2 as $line_num => $line2) {
$style_line_num = $line_num+3;
$line2 = trim($line2);
      if(preg_match("/^style/",$line2)) {
       $rest = substr($line2,0,-1);
       for ($j=$line_num;$j<=$style_line_num;$j++){
         if(preg_match("/inkscape:label/",$lines2[$j])) {
            $location = explode("=",$lines2[$j]);
            $location2 = substr($location[1],1,-6);
            if(in_array($location2, $from)) {
             $key= array_search($location2,$from); //Find out the position of the index in the array
             $colors_style = ";fill:" . $state_colors[$key]; //Use the index from array_search to apply to the color index
             $rest2 = substr($line2,0,-1). $colors_style . "\"";
             echo $rest2 . "\n";
            else echo $line2 . "\n";
         } //end preg_match inkscape
     } //end for loop
   } //If preg_match style
     else echo $line2 . "\n"; //else if preg_match style
} //end for each
fclose($fh);
?>
Thanks for your help.

Pictures in iPhoto not displaying correctly on iPhone, iPod or AppleTV

+The iPhoto 08 Library with over 13000 photos and over 400 events.+
After uploading 120+ photos from two camera's I was doing some editing for example rotating cropping etc when the application crashed.
On restart some of the thumbnails were corrupted . All thumbnails were displayed landscape the individual photo thumbnail of portrait pictures are distorted. To correct this I rebuilt the small thumbnail files this did corrected the corrupted ones.
However when I sync these latest photos to Apple TV they shown un-rotated +i.e. Portraits are displayed lying on the side despite being correctly shown in iPhoto.+
In the case of the iPhone and iPod Touch they show on their side and if the handheld device is physically turned, the picture continually rotates to the incorrect orientation.
I don't know where the picture meta-data is held and what options should chosen ie rebuild the database.

I have rebuilt the database with the options you suggested. Whilst this took a long time it was successful in solving the original problem.
I noticed that one of the processes was to +'upgraded the thumbnails'+ this terminology is interesting as a number of the photos came from different cameras and/or were added over the years in earlier versions of iPhoto. I presume that this was the reason the term upgrade was used is this correct.
The problem was solved thanks for your help.

Songs imported from CD not displaying in song list

I tried to import songs from three different CDs. The first and third were fine, but the second CD imported, but doesn't display the songs imported in the list of all songs, although they are playing. I tried re-importing and it asks do I want to overwrite. I overwrite and same result. I re-import a second time and ask to not overwrite. Still no sign of the signs in the total list, and it now shows up in the duplicates list. Anyone know how I can find the songs, as they apparently are there, just not visible in the total list.
Ryck
Dell Inspiron 600M Windows XP Just upgraded to latest iTunes and iPod s/w.

I discovered what the problem was for me. When I looked at the Recently Added songs, I saw that the songs were there. However, for the Name of Song, they showed the artist/song title, and for the Artist it showed "Various Artists". That's why I couldn't find it when I sorted by Title or Artist. By going into Recently Added, I right clicked on each entry and deleted the artist from the Title and added the appropriate artist in the Artist spot. Now the songs are properly logged in the music database and now my iPod.
Ryck

Pictures from PDF not so sharp after OCR; can I disable autorotate ?

In PDF's that needs to be auto rotated the pictures are not that sharp, they became a little blurry.
Can I disabled auto rotate picture when doing OCR with Clearscan ?
Acrobat X
Thanks

Yes, from Tools. But I can't find any options to fine tune autorotate or deskew.
Seems that I can disable autorotate or deskew only if I select PDF Output Style: Searchable Image but I like ClearScan.

Data From Query not Displayed on Public Page

Hi all,
I just created a page which has a dynamic portlet that runs a query to display some data. Now I recently made this page public which means that anyone can basically access this page from the outside and not have to login. However, the data does not seem to come up after I access this page on a browser even though the banner comes up fine!! I made the table that the dynamic portlet accesses public. Is there something that I may be missing here? THanks.

Well I went to the grant access tab and there is no make portlet accessable to public. The only place to make a component accessible to public is when your editing a page. The only options when you click on the Grant Access Tab is 1) Publish To Portal and 2) Inherit Previleges From Application.

Existing pictures from PC not displayed in Ovi - a...

Similar Messages

Maybe you are looking for