Existing SCCM Client installed again after removing client or imaging

Hello,
I have a question on two different scenarios for SCCM client deployment. Client Push and AD System Group Discovery is enabled.
In both cases, I am trying to figure out if/how the SCCM client might get automatically re-installed.
Scenario 1: An existing SCCM client has its client removed. Will it get re-installed?
Scenario 2: An existing SCCM client gets re-imaged (no SCCM client on image) using the same name. Will the client be installed?
Thanks
Angelo
Angelo

Thanks for the quick response. We do use ConfigMgr to deploy images so my main question really revolves around CM reinstalling the client on existing machines where it was then removed.
It looks like there is a way to do this by changing the items you mention in your response. I'm just not sure what it should be changed to in order to accomplish my goal.
This link shed some light on the issue but I'm still unsure on what specific changes to make.
http://technet.microsoft.com/en-us/library/e555d7e3-3681-440a-82d0-319d2b4bdd08#BKMK_PlanMaintenanceTasks
Here are our settings as of now:
Delete Aged Discovery Data - Enabled - 90 Days on Saturdays
Clear Install Flag - Disabled
Heartbeat Discovery - Enabled - 1 week
Assuming the settings above, what would happen if a client was removed today? Would it ever get reinstalled? Let's say I wanted to have the client reinstalled in approx. 2 days of removal?
Thanks so much
Angelo
Assuming a client was removed today,
Angelo

Similar Messages

Problem with installing again After Effetcts

I downloaded OS X Mavericks recently and I have not been able to use After Effects since then. So I uninstalled it and I tried to install it again, but it is like I have never deleted it in Creative Cloud and I cannot manage to do it... What can I do?

Hi DrJD,
I'm assuming that you are unable to install Adobe after effects from creative cloud desktop. if so, please run adobe cleaner tool and clean adobe after effects.
Adobe cleaner tool: http://www.adobe.com/support/contact/cscleanertool.html.
Once you clean After effects from cleaner tool, you can install it again from creative cloud desktop.
Do let us know if it works.
Regards,
Ashish

Top Half Becomes Black Again, After Removing Update

Hi, I'm very unexperienced as I have just gotten into video editing so bear with me when I do not know what to do.
On a recent thread, the cause of the top half of the screen being black was do to a Microsoft update, which I had removed the other day and successfully fixed the problem.
However, after opening up the program (Adobe Premiere Pro 2.0) today I imported a new file into a new project which resulted in the top half being black again. Yes, my files are in WMV because I am just a YouTuber and the format suits my basic editing and filming just fine (I have seen many arguements about how 'dumb' it is to use this format) and that's what format my camera spits out. I have made sure that the update doesn't reoccur, but the issue is back. Help?
-Katie

Remove from Windows Update http://technet.microsoft.com/en-us/magazine/ff382716.aspx so it won't update again

Installing AcrobatPro after removing Adobe Reader Safari displayed pdf urls only as a black page anymore

After installing Acrobat Pro it installs in Library/Internet Plugin-ins/AdobePDFViewer.plugin version 11.0.03. Allthough after selecting a PDF-link it leads to a displays it not in Acrobat Pro, it diplays it as a black page in Safari. When I have a look in Acrobat Pro into the preferences/internet/webbrowser-option/PDF to show inBrowser with: isnt checked! And there is still listed/Application/Adobe Reader.app instead of /Applikation/Adobe Acrobat Pro!!
There is no way to select this Applikation. Having a look at Lbrary/Preferences/com.adobe.acrobat.pdfviewer.plist listed:
AdobePDFDriver file://localhost/Volumes/Sicherung%20laptop/Applications/Adobe/Adobe%20Acrobat% 209%20Pro/Adobe%20Acrobat%20Pro.app/
ReaderInstallPath file://localhost/Applications/Adobe%20Reader.app/
WebBrowserUsePath file://localhost/Applications/Adobe%20Reader.app/
Has anyone changed the ReaderInstallPath file or WebBrowserUsePath file to the path of Acrobat Pro and as a result a good diplay of PDF-urls in Arcobat Pro or Safari??
Thankx, I hope my english isn´t to bad for a german apple-user!

Thanks for the screenshot, Pat. I think the light bulb went off for me. I was looking over the tips for configuring Firefox at the link:
http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html
And I think what confused me the most was this screen shot for plug-ins for Firefox mentioned Acrobat.
I had Acrobat installed myself, but most of our users do not use Acrobat, since it's not a free product. I uninstalled Adobe Acrobat, and the Adobe Acrobat plug-in was still there, so that forced me to realize that the plug-in that comes with Adobe Reader 11.0.3 is called "Adobe Acrobat".
I went into Tools->Options->Applications and selected "Use Adobe Acrobat (in Firefox)", rather than "Use Adobe Reader (default)".
This now allows me to not only view PDFs within a browser window in Firefox, but it also enables the save icon (which "Use Adobe Reader (default)" was not allowing me to do:
It's a shame that the default setting is not for "in browser", because our customers may have to make a configuration change.
There is no way to programmatically force a configuration change on a user's browser, is there?

Is it possible to re-install again after the original system crashed?

I got virus infection yesterday that made my computer system crash. Can I restore it by using the original operating system?
Thanks!

Yes. You can either restore your system from a backup or do a clean install of Windows 7. Either way be sure to clean your HDD to remove any viral infection before restoring.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Can't install 11g after removing 10g "port in use"

Trying to install Oracle 11g XE on a Windows Server 2003 machine after uninstalling 10g XE. However, I can't continue in the install process because it won't accept any of the ports I provide for the HTTP port, it claims the port is in use no matter what number I provide. 8082 is what our 10g XE used so I started with that, but 8080, 8081, 8083, or any number I randomly type in all comes back as "in use." I checked with netstat and these ports should all be free. An antivirus is installed but I have disabled it for the install. I'm logged in as the local administrator. Windows Firewall shouldn't be running either, when I try to access the settings it says that the ICS service is not running.
This issue is eerily similar to an issue someone else had: Win Server 2003 Sp2, 'port 808 is in use' He too was trying to install 11g XE on a Windows Server 2003 machine right after uninstalling 10g XE.
I'm at the end of my rope here, I really can't think of anything else that could be causing this problem.

Looks like I figured it out. The installer defaults to HTTP port 8081, which is used by Tomcat on this machine, so I wanted to use 8082. But seeing as the installer claimed the port was in use no matter what number I entered, I had a hunch it might be continually checking 8081 despite me changing the field. Sure enough, after shutting down Tomcat the installer lets me select other ports including 8082. I have no idea if that's actually the reason, but it seems to make sense given what I've seen. Weird.
Thanks for the help!

While installing a PDF conversion program, start now/bing was installed, and after removal, instead of my home page, I have the Firefox start page even though mine is in the control panel.

You pretty much have it. Primopdf was the initial program, and zugoremovaltool was the remove tool. Prior to zugo, I had removed by add/remove in the control panel as well as going into program files and windows and deleting the programs. While trying to remove primopdf, I discovered it had its own uninstall program, which I ran. I restored my home page to the control panel only still to have start now/bing. I ran zugo and restored my home page to the control panel only to be stuck with the Firefox start page.

I thought about that before and tried it, and it doesn't seem to make a difference. I did it just now, I opened a blank tab and closed everything else, waited a minute then closed Firefox. I waited another minute and launched Firefox. The Restore Previous Session box was there on about:home. I clicked it and it opened a new window with about:home in it.

Trying to install, and after removing trial versions, I get a note that says"only a single instance of this application can run".

Help - how do I get past this?

IF you have a trial of Acrobat Pro and you buy it, DON'T uninstall the trial. Just license the trial and go.
if it's too late... How did you uninstatll, and when do you get the message?

My pc crashed and win7 64-pro has to be installed again.

MY new pc crashed and win7 64-pro needs to be installed again.
after this I need to install photoshop CC again, but i miss my emails with registration number etc.
how can i get the needed information, to install and setup Photoshop CC again ?
thanks,
-Frans.nl

Hi frans.nl,
You just need to download the Creative cloud application in order to install your Photoshop CC.
Download of the Application can be done through your account on adobe.com.
If in case you still face issues, please contact support:
https://helpx.adobe.com/contact
Regards,
Sheena.

Install SCCM client to server in DMZ: "MP does not exist"

Hi,
I’d need to put a management point/distribution point in a DMZ.
Therefore I wanted to make sure this MP/DP works before I move it to this DMZ and I:
*configured a Windows 2012 R2, (name: “DMZ01”) server with the prereqs*removed this server DMZ01 from the actual domain*added a DNS entry from DMZ to which I can connect successfully
*added a network access account in order to push the sccm client
*added correct boundary group
Now when I try to deploy an SCCM client to it, I get a failure in the ccmsetup log saying MP does not exist:
Failed to load mdmregistration.dll with error 0x8007007e
ccmsetup
27/04/2015 10:54:48       932 (0x03A4)
Failed to load mdmregistration.dll. Continue deployment.
ccmsetup
27/04/2015 10:54:48       932 (0x03A4)
An MP does not exist on this machine. ccmsetup
27/04/2015 10:54:48       932 (0x03A4)
My questions:
*should I use the management point affinity here to force finding the management point?
*what about the domain certificate (that’s gone now since it isn’t domain joined anymore)? How to deal with this/revive this?
Please advise.
J.
Jan Hoedt

Ok, thanks.
Note: there is no trust between the DMZ domain and the domain in which the "main" sccm server exists.
What are the options there? F.e. could we use Mutual authentication just as with a Mac
https://technet.microsoft.com/en-us/library/jj591553.aspx#BKMK_ManualCertifcateInstallation
Jan Hoedt

Send state message to SCCM after uninstall of SCCM client

Hi Everyone,
I have a batch file to uninstall the client from PC's, how would I could I send a state message back to SCCM to say the uninstall was successful? Asking because the console doesn't come back with success info, just waiting, and accepted on the program.....as
the client is uninstalled etc.
Currently running a simple ccmsetup.exe /uninstall as below, thanks for any help in advance.
I know there's a Vb script to force any existing messages to be sent, but as the CCM WMI will not exist, there would be nothing to send, right?
And I have to do this for a POF......Is this even possible??I could write to a log file with the name of the computer that just uninstalled, but really wanted to use a report.....or if there's another way to uninstall client and get the info in SCCM then
please let me know, it's been a very long few days..... cheers :)
@echo off
echo Please Wait while the system is uninstalling Microsoft's SMS/SCCM Client.
REM 'echo Checking for SCCM 2007 client...
REM 'IF EXIST %windir%\System32\ccmsetup\ccmsetup.exe GOTO DEL07
REM 'echo No SCCM 2007 client found.
echo Checking for SCCM 2012 client...
IF EXIST %windir%\ccmsetup\ccmsetup.exe GOTO DEL12
echo No SCCM 2012 client found.
echo Checking for SMSCFG file...
IF EXIST %windir%\SMSCFG.INI GOTO DELINI
echo No SMSCFG file found.
echo All software already removed or no client installed.
GOTO END
REM :DEL07
REM echo Found SCCM Client v2007. Removing...
REM %windir%\System32\ccmsetup\ccmsetup.exe /uninstall
REM RD /S /Q %windir%\System32\ccmsetup
REM RD /S /Q %windir%\System32\ccm
REM RD /S /Q %windir%\System32\ccmcache
REM echo SCCM Client 2007 removed.
REM IF EXIST %windir%\ccmsetup\ccmsetup.exe GOTO DEL12
REM IF EXIST %windir%\SMSCFG.INI GOTO DELINI
REM GOTO END
:DEL12
echo Found SCCM client v2012. Removing.
%windir%\ccmsetup\ccmsetup.exe /uninstall
REM RD /S /Q %windir%\ccmsetup
REM RD /S /Q %windir%\ccm
RD /S /Q %windir%\ccmcache
echo SCCM Client 2012 removed.
IF EXIST %windir%\SMSCFG.INI GOTO DELINI
GOTO END
:DELINI
echo SMSCFG file found. Removing...
del /F %windir%\SMSCFG.INI
echo SMSCFG file removed.
GOTO END
:END
echo Done!
rem pause
exit
many thanks

Don't you think this is a bit of a silly question? The client is what sends state messages therefore what would you expect to "send" the message that the client was removed? Seems about as effective as putting the address on the inside of an
envelope and expecting the post office to just know where to send the mail.
John Marcum | Microsoft MVP - Enterprise Client Management
My blog: System Center Admin | Twitter:
@SCCM_Marcum | Linkedin:
John Marcum

SCCM Client PC's failing to download/install Windows Updates

Hi,
Last month I noticed that our client PC's, shortly after they had built (using SCCM Task Sequence) were downloading and installing Windows Updates using the usual Windows Update process. What I mean is, I had Software Centre showing Updates as installing,
but also had the Windows Update agent installing various updates. It was also showing in the start menu (Yellow icon saying Shut down and install updates). Now my understanding is, that that shouldn't of been happening, and only SCCM/Software Centre should
be showing Windows Updates as installing.
I noticed that we had some GPO's set for Windows Updates, which I have disabled, as I believed these were not necessary. Also, I like to control my Updates via SCCM Software Update groups after testing them, and not just allow clients to grab any updates
that are required and approved.
My problem now is, none of the clients are getting/installing any updates. I'm getting the following errors in the WUAHandler.log:
Unable to read existing WUA resultant policy. Error = 0x80070002.
WUAHandler
09/04/2015 19:03:29
8732 (0x221C)
Group policy settings were overwritten by a higher authority (Domain Controller) to: Server and Policy NOT CONFIGURED
WUAHandler
09/04/2015 19:03:29
8732 (0x221C)
Failed to Add Update Source for WUAgent of type (2) and id ({FC358571-80C5-4EAA-8A33-F79AD4C14785}). Error = 0x87d00692.
WUAHandler
09/04/2015 19:03:29
8732 (0x221C)
So, I've checked in:
HKLM\Software\Policies\Microsoft\Windowa\WindowsUpdate\ & HKLM\Software\Wow6432Node\Policies\Microsoft\Windows\WindowsUpdate
and neither have a WSUS server set. I'm assuming this is correct?
RSOP shows all policies in \\Computer Configuration\Administrative Templates\Windows Components\Windows Update as
DISABLED
GPEDIT shows \\Computer Configuration\Administrative Templates\Windows Components\Windows Update\Specify intranet Microsoft update service location as
Enabled and as our server (https://XXX.XXX:8531) - I'm assuming this is what SCCM client sets as if I changed this setting and then restart the setting comes back. If it was a Group Policy conflict then I
would expect to see it in RSOP.
Does anyone have any suggestions? I'm puzzled as to what to look at next. Is my first assumption of having 0 group policies configured for WSUS correct? Am I also correct in assuming Windows Updates shouldn't show in Control panel, or at the Start > Shutdown
prompt, and only show in Software Centre?
Thanks, and sorry for the long winded post!

Hey Jason,
Thanks for replying and explaining the WUA stuff. That made sense to be but my mind was being clouded by the issue all of the PC's/Clients onsite were, and are still getting. I cleared out the Group Policy cache as detailed on the link.
- Cleared C:\Program Data\Microsoft\Group Policy\History\*.*
- Ran a gpupdate /force
- Restarted PC
Issue still remains. Here is the output from the WUAHandler.log
CWuaHandler::SetCategoriesForStateReportingExclusion called with E0789628-CE08-4437-BE74-2495B842F43B;E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3; for leaves and E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3;
for bundles
WUAHandler 13/04/2015 16:14:34 2508 (0x09CC)
Its a WSUS Update Source type ({FC358571-80C5-4EAA-8A33-F79AD4C14785}), adding it. WUAHandler 13/04/2015 16:15:02 2488 (0x09B8)
Unable to read existing resultant WUA policy. Error = 0x80070002. WUAHandler 13/04/2015 16:15:02 2488 (0x09B8)
Enabling WUA Managed server policy to use server: https://(Name.domain of our SCCM SUP):8531 WUAHandler 13/04/2015 16:15:02 2488
(0x09B8)
Waiting for 2 mins for Group Policy to notify of WUA policy change... WUAHandler 13/04/2015 16:15:02 2488 (0x09B8)
Unable to read existing WUA resultant policy. Error = 0x80070002. WUAHandler 13/04/2015 16:15:11 2488 (0x09B8)
Group policy settings were overwritten by a higher authority (Domain Controller) to: Server and Policy NOT CONFIGURED WUAHandler 13/04/2015 16:15:11 2488 (0x09B8)
Failed to Add Update Source for WUAgent of type (2) and id ({FC358571-80C5-4EAA-8A33-F79AD4C14785}). Error = 0x87d00692. WUAHandler 13/04/2015 16:15:11 2488 (0x09B8)

Error 1603 installing SCCM client

When I try to install the SCCM client on some machines I get an installation error 1603. Setup starts ok, but after a while ends in a 1603 error.
ccmsetup.log
MSI: Action 13:45:12: AllocateRegistrySpace. Allocating registry space ccmsetup 14/07/2008 13:45:12 PM 2532 (0x09E4)
MSI: Action 13:45:12: ProcessComponents. Updating component registration ccmsetup 14/07/2008 13:45:12 PM 2532 (0x09E4)
MSI: Action 13:45:12: UnpublishComponents. Unpublishing Qualified Components ccmsetup 14/07/2008 13:45:12 PM 2532 (0x09E4)
MSI: Action 13:45:12: UnpublishFeatures. Unpublishing Product Features ccmsetup 14/07/2008 13:45:12 PM 2532 (0x09E4)
MSI: Action 13:45:12: SmsTSManagerStopServiceInit. ccmsetup 14/07/2008 13:45:12 PM 2532 (0x09E4)
MSI: Action 13:45:12: CcmStopService. ccmsetup 14/07/2008 13:45:12 PM 2532 (0x09E4)
MSI: Action 13:45:12: StopServices. Stopping services ccmsetup 14/07/2008 13:45:12 PM 2532 (0x09E4)
MSI: Action 13:45:12: SmsStopUIComponents. Stopping UI Components ccmsetup 14/07/2008 13:45:12 PM 2532 (0x09E4)
MSI: Action 13:45:12: StopDeleteWUSER32. Stopping and deleting WUSER32 service ccmsetup 14/07/2008 13:45:12 PM 2532 (0x09E4)
Installation failed with error code 1603 ccmsetup 14/07/2008 13:45:12 PM 2532 (0x09E4)
There were no previous SMS/SCCM clients installed.
Tried a new install after the rebuild of WMI but without any luck.

Hi John,
The client.msi.log shows this error (same as above):
Action start 23:52:25: StopDeleteWUSER32.
MSI (s) (08:1C) [23:52:26:037]: Machine policy value 'DisableRollback' is 0
MSI (s) (08:1C) [23:52:26:037]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
Action ended 23:52:26: StopDeleteWUSER32. Return value 3.
At the bottom of the ccmsetup.log it ends with this error:
MSI: Action 23:52:25: StopDeleteWUSER32. Stopping and deleting WUSER32 service 8/20/2009 11:52:25 PM
Installation failed with error code 1603 8/20/2009 11:52:26 PM
Next retry in 120 minute(s)... 8/20/2009 11:52:38 PM
I'm having trouble locating a windows installer log. The %temp% folder would be in docs&settings\userid\local settings\temp, I would assume and I've looked through the folders for the acct that is doing the client install as well as all the other acct folders and can't seem to locate any logs with a current date/time stamp. Any idea where I would look?
Also, BTW, I reinstalled MSI 4.5 before I did this last client installation, but I did it remotely/silently, so no prompts or data returned... I just found the errors below in the \windows\KB942288-v3.log file... might be related?
4.140: 2009/08/20 23:44:40.146 (local)
4.140: e:\6c0499dd2b70eebd34aa8b8c33\UPDATE\update.exe (version 6.3.13.0)
4.172: Hotfix started with following command line: /quiet /norestart
4.187: In Function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2
8.578: In Function TestVolatileFlag, line 11825, RegOpenKeyEx failed with error 0x2
8.578: In Function TestVolatileFlag, line 11857, RegOpenKeyEx failed with error 0x2
8.578: DoInstallation: CleanPFR failed: 0x2
8.593: In Function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2
8.593: SetProductTypes: InfProductBuildType=BuildType.IP
8.593: SetAltOsLoaderPath: No section uses DirId 65701; done.
8.718: DoInstallation: FetchSourceURL for e:\6c0499dd2b70eebd34aa8b8c33\update\update_SP3QFE.inf failed
8.718: CreateUninstall = 0,Directory = C:\WINDOWS\$NtUninstallKB942288-v3$
8.718: LoadFileQueues: UpdSpGetSourceFileLocation for halaacpi.dll failed: 0xe0000102
8.734: BuildCabinetManifest: update.url absent
8.750: Starting AnalyzeComponents
8.750: AnalyzePhaseZero used 0 ticks
8.750: No c:\windows\INF\updtblk.inf file.
8.750: OEM file scan used 0 ticks
10.812: AnalyzePhaseOne: used 2062 ticks
10.812: AnalyzeComponents: Hotpatch analysis disabled; skipping.
10.812: AnalyzeComponents: Hotpatching is disabled.
10.812: FindFirstFile c:\windows\$hf_mig$\*.*
16.500: AnalyzeForBranching used 0 ticks.
16.500: AnalyzePhaseTwo used 0 ticks
16.500: AnalyzePhaseThree used 0 ticks
16.500: AnalyzePhaseFive used 0 ticks
16.515: AnalyzePhaseSix used 15 ticks
16.515: AnalyzeComponents used 7765 ticks
16.515: Downloading 0 files
16.515: bPatchMode = FALSE
16.515: Inventory complete: ReturnStatus=0, 7797 ticks
16.515: Num Ticks for invent : 7797
16.547: VerifyTargetFileSize: Unable to verify size as Source = NULL for file c:\windows\inf\HFX269.tmp
16.578: Copied file: c:\windows\inf\branches.inf
38.625: Allocation size of drive C: is 4096 bytes, free space = 4751011840 bytes
38.625: Drive C: free 4530MB req: 5MB w/uninstall 0MB
38.625: CabinetBuild complete
38.625: Num Ticks for Cabinet build : 22110
38.625: DynamicStrings section not defined or empty.
38.656: FileInUse:: Detection disabled.
38.656: FileInUse:: Add to list - Service Name: msiserver
39.656: LoadFileQueues: UpdSpGetSourceFileLocation for halaacpi.dll failed: 0xe0000102
40.015: Copied file: C:\WINDOWS\system32\spmsg.dll
40.125: PFE2: Not avoiding Per File Exceptions.
41.734: DoInstallation: Installing assemblies with source root path: e:\6c0499dd2b70eebd34aa8b8c33\
41.734: Num Ticks for Copying files : 3109
41.812: Num Ticks for Reg update and deleting 0 size files : 78
41.828: DoInstallation: ApplyAdminSystemAclsRecursive for c:\windows\$hf_mig$\KB942288-v3 failed; error=0x00000003
41.843: UpdateSpUpdSvcInf: Source [ProcessesToRunAfterReboot] section is empty; nothing to do.
43.187: RebootNecessary = 0,WizardInput = 1 , DontReboot = 1, ForceRestart = 0
Thanks again!! --Jo

How would SCCM treat a re-imaged machine without SCCM Client installed on it.

I would like to understand how Configuration Manager would treat a machine on which OS is rebuild if the machine is currently showing client=YES and SCCM Client is not installed after OS rebuild.
Would it create a new record for this machine in SCCM once the machine is discovered or merge it with existing record?

The only thing that flips client=no to client=yes is heartbeat discovery (which is sent by the ConfigMgr client). There's no mechanism that would flip to client=no (except the clear install flag task). So the resource will age out eventually (if AD
discovery does not update the resource for example).
Torsten Meringer | http://www.mssccmfaq.de

Sccm client v4 wont install and install client v5 - SCCM 2012 R2

Hi, I am coming to the end of a SCCM 2012 R2 client deployment. I have come across 2 machines (so far)that have the SCCM 2007 (v4) client installed, and although the task is set to uninstall from the server the v5 client will not installed. iI have been
using this an as template:
http://eskonr.com/2010/11/sccm-client-installation-troubleshooting-steps-check-list/
I have ran the install seperatelty from the server (boxed ticked - Uninstall existing Config Manager client) - No Install
The ccmsetup folder is created - c$\Windows\ccmsetup, but only has 3 files, no logs folder
Other machines on site has the v5 client
Checked ping from client to server and vice versa (no firewall enabled)
Boundaries/Schema/DNS - ok
Checked all local event logs.
i know you can run the local uninstall command, but as the network is vast i would like to fix to come from the server, rather than having to do this on the client.
Any tips would be great going forward.
SCCM 2012 R2 - Windows 7 Enterprise SP1

Hi,
I ensured the account used for the install was in the local admins group.
From the ccm.log on the server, i got these erros, been googling but nothing yet:
---> ERROR: Unable to start service "ccmsetup" on machine "LCD12121", error = 1075.   SMS_CLIENT_CONFIG_MANAGER   22/10/2014 12:01:43   1460 (0x05B4)
---> Failed to install CCM Client Bootstrap component on client (1075)   SMS_CLIENT_CONFIG_MANAGER   22/10/2014 12:01:43   1460 (0x05B4)
Execute query exec [sp_CP_SetLastErrorCode] 2097153910, 1075   SMS_CLIENT_CONFIG_MANAGER   22/10/2014 12:01:43   1460 (0x05B4)
Also, is there a way to run a report on which machines dont have the sccm client/install issues?
Thanks

Existing SCCM Client installed again after removing client or imaging

Similar Messages

Maybe you are looking for