Existing SCUP updates fail to install after changing the certificate.

Hi,
Recently our certificate we use to sign updates published from SCUP expired. Unfortunately we didn't have the box ticked to supply a timestamp with each publish so it resulted in us republishing everything with a new certificate.
When the update is new and has never been published before, a client Pc can download and install the new update with the new cert completely fine. The problem lies with updates that had to be re-signed. Each time they try and install I get 0x80091007 The
hash value is not correct.
I assume this is because the package still has the previous update with the old cert in it - I have redistributed the package and am still seeing the issue...
Has anyone else experienced it or have any ideas of how I can tackle this?
Thanks!

Hi,
Pease have a look at the following thread, especially the steps of Aaron-SRS's and AlaRose's.
"A software update (the binary) can only be published once to WSUS. If you change the signing certificate, you will then also want to resign that binary by publishing it with the resign option (in Advanced settings)."
https://social.technet.microsoft.com/Forums/systemcenter/en-US/cbc28e7a-9a2b-41cb-9627-be66316f2507/invalid-certificate-signature-when-downloading-adobe-updates-published-from-scup?forum=configmgrsum
Best Regards,
Joyce

Similar Messages

Updates failed to install after deployment - SCCM 2007

Hi folks,
I wonder could anyone help!
We deployed JAVA 7 U 45 last night using SCCM 2007 and most went out ok although some computers keep showing up the Config Manager – Available Software Updates and showing the status as failed.
Can someone please tell me how I get a list of the PCs that the update successfully went out to and was installed and how do I find out which computers failed to get the update or failed to successfully install it.
I see under Deployment Status machines targeted i.e. 50 and installed says 30 and failed says 5 but how do I actually see the computers for those categories?
I was looking in the event viewer on a PC I know had issues with the update and I can’t see any errors in the Setup log for the JAVA rollout using SCOM so wonder could you tell me the best way for me to see why the updates failed?
l final question is if I have multiple versions of Java on my PC how do I set which version I want as the default version for some applications to use as some applications need different versions of JAVA.
Any advice greatly appreciated!
Thanks,
Bonemister

Hello, we do not use SCCM for Windows updates but I think that error msg. Souns like your updates deadline is coming. You can choose the default client settings about the pop-ups and all. Check this article i think it is the: "Hide all deployments
from end users" This setting specifies that all deployments are hidden when they are received on client computers. Use this setting to deploy software updates to computers without any display notifications or notification area icons. Also, end users will
not be able to open the Available Software Updates dialog box to manually install updates. By default, this setting is not enabled. http://technet.microsoft.com/en-us/library/bb632393.aspx
EDIT: Also if you set an deadline for the advertisement you may see this error msg. You can adjust this by changing eather the advertisement (when you create it "display notifications") or if you want to supress all the notificatins you can just change
the default agent settings.

After an iTunes update failed to install iTunes won't open and I get lthe folloowing error messages. Program can't start because MSVCR80.dll is missing, and iTunes not installed correctly. please reinstall iTunes. Error 7( windows errpr 126)

After an iTunes update failed to install, iTunes won't open and I get the following two windows. Program can't start because MSVCR80.dll is missing from your computer, and iTunes not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) When I reinstall I get the same messages and ITunes won't open.

Click here and follow the instructions.
(98815)

Since a few weeks all my iTunes Updates fail to install. After the installation trial, the previous installation is damaged – a service is missing.

Since a few weeks all my iTunes Updates fail to install. After the installation trial, the previous installation is damaged – a service is missing :
To fix this I have to deinstall all components of Apple Software in exact order as you reveal on your web site. Than reinstall iTunes from Scratch.
I am using Windos 7 64 bit Professional German edition.

Hi,
to see the cause of Windows 8 update failures, we must look for error messages in the following log files:
Please run the Windows Explorer and go to the folder "C:\Windows\Logs\CBS\" and copy all files to your document folder, also copy the setupapi.dev.log from the folder C:\Windows\Inf, the "C:\Windows\WindowsUpdate.log" and the file "C:\Windows\winsxs\poqexec.log"
to your document folder (otherwise you can't upload it), zip all files into 1 ZIP and upload the zip to your SkyDrive [1] and post a link here.
André
[1] http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65
"A programmer is just a tool which converts caffeine into code"

Interface getting failed after changing the Business system to that service

Hello All,
Our Env... is XI 3.0 and this is related to produciton env.
Based on our client requirment to change the business system from client 871 to 100 for one of the R3 system which is reciever type(rfc).
After doing all the necessary changes , that particular service is getting failed and in the CC monitoring for that service I can see the log as "RFC_ERROR_LOGIN_FAILURE" mandate 871 (earlier client) does not exist in the system.
The steps which I have followed to change the Business system.
1>I loged into the SLD of PRD system and clicked on businsess landscape .then i have clicked on the specified system to be changed (RY1 ) and then clicked on change mode and selected the required client (100) and saved the settings.
2>I have logged into ID(Integration Directory) and selected the service (RY1) which need to be changed .Under service -->Adaper specific -->compare sld configurations and then clicked on apply changes.
3>Now selected that communication channel of service (RY1) RFCRecieverR3 and changed the client 871 to 100 and the password of user XIRFCUSER ...
Then i saved the changes and after that i have activated that interface.
After that when i logged into CC monitoring and viewed that service channels and see the following errors:
Receiver channel 'RFCReceiverR3' for party '', service 'RY1'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Mandante 871 não existente no sistema (selecionar mandante existente)
Can any one help me out of this situation , and i need to fix this ASAP as this is production system.
Awaiting for your reply.
Best Regards
Rakesh Reddy

Hello Nisar
Thanks for the update,
Let me say few points about this particular problem:
1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
3>As mentioned by you , I have checked all the points mentioned
    i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
   ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
   iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
It says that:
RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
If any information required , I can provide that.
Best Regards
Rakesh Reddy

Illustrator CS3 13.0.2 update failed to install

Received an automatic update. When I clicked to install, the update returned this message:
Installation Incomplete
Adobe Illustrator CS3 13.0.2 update failed to install
The update cannot be applied to the product.
Say what?
I'm at Illustrator CS3 13.0.1. First time an CS3 update dug in its heels and sneered back at me.
Anybody got a clue about this? Bad update?

Ok, guys. This is going to be a bit loose, but may help. It is how I got a failed CS3 update to install. I think but am not sure that the install initially failed due to inadequate free space on one of the relevant partitions. I then believe but am not sure that the retract procedure, which is pretty good in general, messed up the registry 'slightly'.
- first, the 'this installation failed' was driving me insane, of course. So finally I tracked down that there are logs, and where they are. Translating from a German XP, you will find those logs in: C:\Documents and Settings\YourLoginName\Applications Data\Adobe\PatcherLogs. There's one for each of your CS3 applications, and they are in text, so open the one matching your trouble.
- these logs get huge, if you've made multiple tries, as they contain every detail. Search for the word ERROR and you will probably find the point of trouble. Time and date stamps may help to locate an episode. There is also a phrase "Patching fails, Rolling back the changes done by the patcher..." which you can look for, which shows just after the original ERROR. There's another message (improperly?) marked ERROR just after, which comments 'Set status to rollback'.
- Ok, now you can see Adobe's idea why the patcher failed. In my case, it said: "Access denied to the registry key: DeviceCentral.advs\shell\Open\command".
- Well, in Microspeak that is probably pretty clear, to someone. I went looking for that key using Regedit search, helped by the cue a few lines above in the log saying "Regsirty Hive: HKCR". Presumably they meant 'Registry'.
- Obligatory message right now. If you have a log like this, and don't grok the Registry well, and know what you want to do about backups, etc., you should stop before even opening Regedit. Get someone who is very dependable and knowledgeable to do a fix for you. Have complete full reinstall backups. Etc.. Better safe than having to reinstall windows from a wiped disk, all your applications, recover all your precious data from right now where you crashed it, etc.. That valuable client project...
- Anyway, you would know what to do about the one or two key permissions if you are qualified, so would do that. In my case it was two keys which had had their owner (me) permissions completely removed.
- I mention and explain this detail so Adobe can explain it to their likely installer-builders, who seem somehow very likely to be outsourced and offshore. I have directed such groups, and don't envy the process. But something about the unwind procedure I think broke those permissions. And something about the patch procedure didn't preflight to assure there was enough disk space before getting in deep, which is the preventative side of the problem, or so I think. But I think both sides of the problem need to get fixed, unless the unwind failure might have been in an inability to write the registry.
- I will refrain from comments I made at the time which show my length of service ;)
- with all this buried under the layers of 'Automatic updater' activity which really hid any clues, I have to wonder why Adobe doesn't have some method for extracting the failure at least from logs, so this could be given to the support techs.
- I am also wondering just when and if I will truncate that log. After 5 or so tries getting to the root of issue, I now have just one of the logs at the 33MB point...
- all this was about something I will probably not use, or much besides prototyping something for a product design, Device Central. But it is very annoying, not to say concerning about futures of a big expensive and very useful package, CS3, to have repeated big failures in the update mechanism. Good to have run it to ground. And I don't do tech stuff for a long time, which shows the level of concern this caused.
- So, Adobe, please make a better situation for your many and varied 'users'. Thank you.
A nice holiday season to all, long may it last you (into Asian new year).

6.0.1 Update Failed to Install

Has anyone else encountered this issue?
My system:
* Vista 64 Home Premium SP1
* Single user/admin
My Adobe Apps:
* CS4 InDesign (6.0.0) Stand Alone (not part of a collection)
* CS4 Web Premium
Update process:
* Download manual patch for 6.0.1
* Extract from ZIP
* Disable Anti-Virus
* Run Setup
Results:
* InDesign 6.0.1 update "failed to install".
Attempted resolution:
* Disable UAC - no change
* Safe Mode - no change
* Download the update again in case it was corrupted - no change
The Photoshop 11.0.1 update, part of the Web Premium collection, worked by using the exact same update process that failed for InDesign 6.0.1.
Any suggestions?
-mt

I have been trying to update to 6.0.1 for weeks. No success. I found the log.gz file as you suggested and opened in wordpad but the file is either encrypted or corrupt. The date and time of the file is when i originally installed InDesign. Nothing has been added either today or on previous attempts to update.
I have tried to attach the file but as it's not on your list of allowed types it may not come with the message, so here is a sample:
_, ðÓ\_måú|ƒzx ¨‡Ò2jneÀž ¹.Ä
I¶\K¦ˆÜYTó ºZo ¯-d px ‡²2° yŒÊk Ž 0£*• äQ¤¢gOß úAê_ÌüO³ÖÛ°: ä $# G2?¿~þ　ôÕ　ì
ÈˆF®¸êÒY¦‰… J[€Œ x$$Tœ¤âQ!FzD5µ} ~ú ¾'Q cx± q¡[²ÑíUø<œÍAµí…sn Ö¶ÃùKÔ‚ »øã&¼lMÂôöe
Ú|™^{^
í§bÂh‡ôh»£»ºÍ˜I¬F]Þîô»¬7@　*D÷_Ÿð ú„>}[¼ÚÜÑq" E×ìÂ{Çô´q´Fæ DšC /¯ú¯ËëÿÛòfn^þçâ¥Bö¼;•dø¯{Ó¿|)ÚJ5%– }}3oõÈ!}ï*ÌªÇÀ
èþëp–^‰vÍlèÎæ7v—¼
U°CUA*U\¿ ¼ÿØ¹êß·T ÆBÖ 3HŸª@ Ó　‹±37aÝÇZ ½ï®z
]]£X
×<ÀÍËÒ]c[MÒòYäÃ#¨ wHlyT5ŽÃâ• Öâ8ðØv- h}g%Ž \Wâ€¶ö×áXýÐý* ðùƒ58ÒÏoUà€ ¶êoT?ppõU÷‡ Ô8V¡hÙþAå4Žnü8Cl¢œÆ1/‹U-µ4-^mª¥Q Óº:!Óú HAþ　[ÿƒ ä Rÿ5tëkÎŒÙº　ÆS‹l¬øŽpÂoÇ› ÎZáOÓÐòãQxy"ó|P˜Šãé b¦ûò~\¹ï6K¤ «¿AHˆ;@)n8I }ÃQ ¾Av oÆßž?»þ2þ¶@8ŸCÖÂOG§·F÷ã@ Ãt~öüÙâÏc ±úíCÀtýÖæ´ ,É¸Ú
\^b°"õ÷ß‚Z®êÕ^‹
Your advice would be appreciated.
Anne

Acrobat XI 11.0.06 update fails during install

acrobat XI 11.0.06 update fails during install. Any advice or help? Here is the installer log contents:
Jan 17 00:32:34 fox.local installd[5955]: PackageKit: ----- Begin install -----
Jan 17 00:33:44 fox.local installd[5955]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “AcrobatUpd11006.pkg”." UserInfo=0x7fb9615c5160 {NSFilePath=./postinstall, NSURL=file://localhost/Volumes/AcrobatUpd11006/AcrobatUpd11006.pkg#payload.pkg, PKInstallPackageIdentifier=com.adobe.acrobat.a11.AcrobatUpd11006, NSLocalizedDescription=An error occurred while running scripts from the package “AcrobatUpd11006.pkg”.} {
        NSFilePath = "./postinstall";
        NSLocalizedDescription = "An error occurred while running scripts from the package \U201cAcrobatUpd11006.pkg\U201d.";
        NSURL = "file://localhost/Volumes/AcrobatUpd11006/AcrobatUpd11006.pkg#payload.pkg";
        PKInstallPackageIdentifier = "com.adobe.acrobat.a11.AcrobatUpd11006";
Jan 17 00:33:44 fox.local Installer[11306]: Install failed: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
Jan 17 00:33:44 fox.local Installer[11306]: Displaying 'Install Failed' UI.
Jan 17 00:33:44 fox.local Installer[11306]: 'Install Failed' UI displayed message:'The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.'.

You are right. There are a lot more self-support tools available in Windows
than in MacOS. All you ever get on a Mac is "That didn't work: -304998173".
Thanks for your insights.
Re: acrobat XI 11.0.06 update fails during install
created by Bill@VT <http://forums.adobe.com/people/Bill%40VT> in Acrobat
Installation & Update Issues - View the full discussion
<http://forums.adobe.com/message/6040206#6040206>
The upgrade is not the 11.0.06, but that is an update. The upgrade is what
you can purchase if you had a previous version of Acrobat (at least AA 9).
The upgrade is substantially less in price than the full product. With the
upgrade you also have to have the SN of the previous product available for
the install. That is why I asked about the upgrade. Once you install AA XI,
then going to 11.0.06 is a free update (updates are changes in the
sub-version and are done quarterly or when there is a critical security
issue). You can often fix installations by running a repair. In Windows
that is done either from Help>Repair or from the Control Panel. I do not
know the equivalent of the Control panel in the MAC. In any case I am glad
you got it fixed.
Please note that the Adobe Forums do not accept email attachments. If you
want to embed a screen image in your message please visit the thread in the
forum to embed the image at http://forums.adobe.com/message/6040206#6040206
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either reply
to this email or visit the message page:
http://forums.adobe.com/message/6040206#6040206 To unsubscribe from this
thread, please visit the message page at
http://forums.adobe.com/message/6040206#6040206. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Acrobat Installation & Update Issues at Adobe Community
<http://forums.adobe.com/choose-container!input.jspa?contentType=1&container
Type=14&container=4714> For more information about maintaining your forum
email notifications please go to
http://forums.adobe.com/thread/416458?tstart=0.

Some Updates Failed to Install (Adobe Master Collection CS5 on OS X Yosemite)

After reformatted MacBook Air hard drive then installed OS X Yosemite. I have received “Some updates failed to install” message on Adobe Application Manager: “There was an error downloading this update. Please quit and try again later.”
However, I surfing on Adobe Product Updates website Product updates but cannot find these three affected [error] messages updates: Adobe After Effects CS5 10.0.2, Adobe Pixel Bender Toolkit 2.5 update and Adobe Premiere Pro CS5 version 5.0.4 update.
Please advise. Many thanks!
All the best,
James

Thank you so much! Also, I have download other updates manually from http://www.adobe.com/ca/downloads/updates.html
Your help will immensely.

Updater failed to install

All,
I am having a problem with the Adobe Updater.
The following banner message is received on my Mac:
A new version of the adobe updater is available for installation. Click OK to install it now
Note: you may be required to authenticate in order to install
When I attempt to install, the system refused the installation, giving the following message:
Adobe updater failed to install
Can anyone help with a suggestion on how to correct this?
-Boijacks

I ran into this same issue after a fresh install of CS3 under Leopard 10.5.6. Here's what worked for me:
After canceling the endless loop of Adobe Updater and it's "Adobe Updater failed to install" message, I did the following:
I moved ~/Utilities/Adobe Utilities/Adobe Updater5 (which contains the old Adobe Updater version 5.1.0.1082) into the Trash.
Create a new folder at ~/Utilities/Adobe Utilities/Adobe Updater5
Now this next step is not completely detailed as I am trying to recall exactly what I did but I looked somplace in ~/Library/Application Support/Adobe/Updater5/and found the freshly downloaded AdobeUpdater.dmg disk image which had a newer version of the updater instead of the originally installed 5.1.0.1082 and moved this into my fresh new folder at ~/Utilities/Adobe Utilities/Adobe Updater5.
I then ran the new version of Adobe Updater and it started to install all the updated CS3 components. This would not work directly off the disk image or at the wrong location. I had to manually move the new updater app to ~/Utilities/Adobe Utilities/Adobe Updater5 before running it.
If anyone tries this, please add/check the details of the paths.
By the way, the tilde ~ in the paths above represent your /Users/username home directory.
Hope this works for you,
-Rei
http://www.24x7digital.com

HT201210 Itunes update failed to install and now Itunes won't run

Itunes update failed to install and now Itunes won't run

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

Updates failed to install

After I have installed Creative Suite CS5 Master Collection and checked for updates, the Adobe Application Manager runs and appears to download the updates ok - but it then fails with the message:
"Some updates failed to install"
This is followed by the same message for each update:
"There was an error downloading this update.Please quit and try again later."
This happens every time I try to install the updates.
I am running Norton Internet Security and have tried disabling the firewall to see if that helps - to no avail.
This occurs under both Windows XP Pro 32 bit and Windows 7 Pro 64 bit.
I followed Adobe's online advice and tried to download Adobe Support Advisor but just got a message saying it had been discontinued.
I also tried to find relevant logs in the Installer folder, but there didn't seem to be any of the current date.
Guidance would be appreciated.

update manually,: http://www.adobe.com/downloads/updates/

Software updates fail to install...

Howdy...
Trying to test a couple updates deployed to 5 computers and 4 of them fail with the following error:
Error Code: 0X87D00664
Error Description: Updates handler job was cancelled.
Any thoughts???
The log file says in RED: Execution cancelled by job. Update will not be monitored.
Here's the Updateshandler.log file
ContentAvailable notification received from CAS.
UpdatesHandler 11/7/2013 2:56:53 PM
4880 (0x1310)
Contents downloaded successfully for Update (45dd224d-d9fc-421d-a885-1788fd05f92a).
UpdatesHandler 11/7/2013 2:56:53 PM
4880 (0x1310)
ContentAvailable notification received from CAS.
UpdatesHandler 11/7/2013 2:56:53 PM
1392 (0x0570)
Contents downloaded successfully for Update (e0ed4bab-1c29-4e00-8a22-4502d10810f9).
UpdatesHandler 11/7/2013 2:56:53 PM
1392 (0x0570)
Download completed for the job ({2D60929F-765F-4BC9-BDE2-047BAEFE045D}).
UpdatesHandler 11/7/2013 2:56:53 PM
4880 (0x1310)
Successfully sent job ({2D60929F-765F-4BC9-BDE2-047BAEFE045D}) success completion to the SdmAgent
UpdatesHandler 11/7/2013 2:56:53 PM
1392 (0x0570)
CompleteJob received from SDM. UpdatesHandler
11/7/2013 2:56:53 PM 4880 (0x1310)
Complete - Job ({2D60929F-765F-4BC9-BDE2-047BAEFE045D}) Cleanup.
UpdatesHandler 11/7/2013 2:56:53 PM
4880 (0x1310)
CompleteJob - Job ({2D60929F-765F-4BC9-BDE2-047BAEFE045D}) removed from job manager list.
UpdatesHandler 11/7/2013 2:56:53 PM
4880 (0x1310)
Initiating updates scan for checking applicability.
UpdatesHandler 11/7/2013 2:56:54 PM
4196 (0x1064)
Successfully initiated scan. UpdatesHandler
11/7/2013 2:56:54 PM 4196 (0x1064)
Updates scan completion received, result = 0x0.
UpdatesHandler 11/7/2013 2:56:54 PM
4880 (0x1310)
Method (Apply) called from SDM. UpdatesHandler
11/7/2013 2:56:54 PM 4880 (0x1310)
Starting job with id = {59209229-A0D3-49F9-A01C-78DA0F259F04}
UpdatesHandler 11/7/2013 2:56:54 PM
4880 (0x1310)
Initiating Scan. Forced = (0) UpdatesHandler
11/7/2013 2:56:54 PM 4880 (0x1310)
Successfully initiated scan for job ({59209229-A0D3-49F9-A01C-78DA0F259F04}).
UpdatesHandler 11/7/2013 2:56:54 PM
4880 (0x1310)
Scan completion received for job ({59209229-A0D3-49F9-A01C-78DA0F259F04}).
UpdatesHandler 11/7/2013 2:56:54 PM
4880 (0x1310)
Evaluating status of the updates for the job ({59209229-A0D3-49F9-A01C-78DA0F259F04}).
UpdatesHandler 11/7/2013 2:56:54 PM
4880 (0x1310)
Initiating download for the job ({59209229-A0D3-49F9-A01C-78DA0F259F04}).
UpdatesHandler 11/7/2013 2:56:54 PM
4880 (0x1310)
Starting download on action (INSTALL) for Update (45dd224d-d9fc-421d-a885-1788fd05f92a)
UpdatesHandler 11/7/2013 2:56:54 PM
4880 (0x1310)
Ignoring update state (DOWNLOAD_READY) change in job state (2)
UpdatesHandler 11/7/2013 2:56:54 PM
4196 (0x1064)
Contents already available. UpdatesHandler
11/7/2013 2:56:54 PM 4880 (0x1310)
Starting download on action (INSTALL) for Update (e0ed4bab-1c29-4e00-8a22-4502d10810f9)
UpdatesHandler 11/7/2013 2:56:54 PM
4880 (0x1310)
Contents already available. UpdatesHandler
11/7/2013 2:56:54 PM 4880 (0x1310)
Download completed for the job ({59209229-A0D3-49F9-A01C-78DA0F259F04}).
UpdatesHandler 11/7/2013 2:56:54 PM
4880 (0x1310)
Job in ready state. Triggering software update policy.
UpdatesHandler 11/7/2013 2:56:54 PM
4880 (0x1310)
IMaintenanceCoordinator::GetTaskState failed because MTC job has not been created yet.
UpdatesHandler 11/7/2013 2:56:54 PM
4880 (0x1310)
Request a MTC task for execution request request id: {37CBE4F6-C75C-489A-9F95-4123BFF99C92}
UpdatesHandler 11/7/2013 2:56:54 PM
4880 (0x1310)
MTC task with id {37CBE4F6-C75C-489A-9F95-4123BFF99C92}, changed state from 0 to 4
UpdatesHandler 11/7/2013 2:56:54 PM
4348 (0x10FC)
Job {59209229-A0D3-49F9-A01C-78DA0F259F04} is starting execution
UpdatesHandler 11/7/2013 2:56:54 PM
4348 (0x10FC)
Sending ack to MTC for task with id: {37CBE4F6-C75C-489A-9F95-4123BFF99C92}
UpdatesHandler 11/7/2013 2:56:54 PM
4348 (0x10FC)
Job ({59209229-A0D3-49F9-A01C-78DA0F259F04}) already connected, start processing
UpdatesHandler 11/7/2013 2:56:54 PM
4348 (0x10FC)
Initiating Scan. Forced = (0) UpdatesHandler
11/7/2013 2:56:54 PM 4348 (0x10FC)
Successfully initiated scan for job ({59209229-A0D3-49F9-A01C-78DA0F259F04}).
UpdatesHandler 11/7/2013 2:56:54 PM
4348 (0x10FC)
MTC task with id {37CBE4F6-C75C-489A-9F95-4123BFF99C92}, changed state from 4 to 5
UpdatesHandler 11/7/2013 2:56:54 PM
4348 (0x10FC)
No change in the handle state. Ignoring. UpdatesHandler
11/7/2013 2:56:54 PM 4348 (0x10FC)
Scan completion received for job ({59209229-A0D3-49F9-A01C-78DA0F259F04}).
UpdatesHandler 11/7/2013 2:56:54 PM
4880 (0x1310)
Evaluating status of the updates for the job ({59209229-A0D3-49F9-A01C-78DA0F259F04}).
UpdatesHandler 11/7/2013 2:56:54 PM
4880 (0x1310)
CDeploymentJob::InstallUpdatesInBatch - Batch or non-batch install is not in progress for the job ({59209229-A0D3-49F9-A01C-78DA0F259F04}). So allowing install..
UpdatesHandler 11/7/2013 2:56:54 PM
4880 (0x1310)
CDeploymentJob::InstallUpdatesInBatch - Resetting install flag to false as method is complete
UpdatesHandler 11/7/2013 2:57:21 PM
4880 (0x1310)
Job {59209229-A0D3-49F9-A01C-78DA0F259F04} is cancelling execution
UpdatesHandler 11/7/2013 3:12:54 PM
6540 (0x198C)
CancelProcessing for job ({59209229-A0D3-49F9-A01C-78DA0F259F04}) - Finishing the updates processing.
UpdatesHandler 11/7/2013 3:12:54 PM
6540 (0x198C)
Execution cancelled by job. Update will not be monitored
UpdatesHandler 11/7/2013 3:12:54 PM
6540 (0x198C)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SMS_SUMAgentUpdateError_Internal_Mom
ClientID = "GUID:57638E3E-A16A-4A7B-8311-DD83D1147B33";
DateTime = "20131107211254.488000+000";
MachineName = "LAB-APPSENSE";
ModelName = "Site_720F847F-DBAB-43FE-BC06-ABA85246D7E5/SUM_45dd224d-d9fc-421d-a885-1788fd05f92a";
ProcessID = 3996;
SdmPackageVersion = "1";
SiteCode = "CHI";
ThreadID = 6540;
UpdateId = "45dd224d-d9fc-421d-a885-1788fd05f92a";
Win32ErrorCode = 2278557284;
UpdatesHandler
11/7/2013 3:12:54 PM 6540 (0x198C)
Execution cancelled by job. Update will not be monitored
UpdatesHandler 11/7/2013 3:12:54 PM
6540 (0x198C)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SMS_SUMAgentUpdateError_Internal_Mom
ClientID = "GUID:57638E3E-A16A-4A7B-8311-DD83D1147B33";
DateTime = "20131107211254.550000+000";
MachineName = "LAB-APPSENSE";
ModelName = "Site_720F847F-DBAB-43FE-BC06-ABA85246D7E5/SUM_e0ed4bab-1c29-4e00-8a22-4502d10810f9";
ProcessID = 3996;
SdmPackageVersion = "1";
SiteCode = "CHI";
ThreadID = 6540;
UpdateId = "e0ed4bab-1c29-4e00-8a22-4502d10810f9";
Win32ErrorCode = 2278557284;
UpdatesHandler
11/7/2013 3:12:54 PM 6540 (0x198C)
Execution completed for the job ({59209229-A0D3-49F9-A01C-78DA0F259F04}).
UpdatesHandler 11/7/2013 3:12:54 PM
6540 (0x198C)
Successfully sent job ({59209229-A0D3-49F9-A01C-78DA0F259F04}) success completion to the SdmAgent
UpdatesHandler 11/7/2013 3:12:54 PM
4872 (0x1308)
CompleteJob received from SDM. UpdatesHandler
11/7/2013 3:12:54 PM 4040 (0x0FC8)
Complete - Job ({59209229-A0D3-49F9-A01C-78DA0F259F04}) Cleanup.
UpdatesHandler 11/7/2013 3:12:54 PM
4040 (0x0FC8)
CompleteJob - Job ({59209229-A0D3-49F9-A01C-78DA0F259F04}) removed from job manager list.
UpdatesHandler 11/7/2013 3:12:54 PM
4040 (0x0FC8)

Hi,
“Win32ErrorCode = 2278557284”
The reason is the updates fail to finish installation before the defined “Max Run Time” by Configuration Manager, aka it times out. So Configuration Manager Client agent killed the installation process.
Please refer to the following blog.
Configuration Manager May Fail to
Install Exchange Rollup (KB2706990, KB2734323) because of Timeout
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Ipad2 ios 7.02 update fails to install?

Hi all. Tried installing ios7.02, but it fails to install. The ipad downloads the update and reboots to apply it. The progress bar gets approx 10% through, then stops. About 2 or so minutes later the ipad reboots but the update has not applied. It seems like a timeout is reached?
Have attempted this 4 times with same result each time.
Iphone4 updated fine.
Any suggestions, or anyone else struck this on ipad 2, wifi, 64GB.
Thanks.

iPad2 update to ios7.02 after hitting the button and downloading and installing it crashed with Unknown error (-1). Disappered from iTunes. I quitted and started iTunes and it said factory restore mode or cancel. Great options, really...
I did the factory restore. The iPad started, I hit the restore from backup, it started again, some settings (as for a brand new machine, ...). First look - awful new icons but who cares for that.
Now I'm waiting for the apps to get loaded and I do have kids and they use a lot of them (like 179 or so).
I could imagine what a crisis this evening will be because the Asphalt 8 cars will start from scratch and my son opened the 4th season last night... and that is if it actually works.
I already see that the other game they love is no longer working - a Montessori board with numbers and I paid for it... And my guess is a lot of other things are going to be in that state.
My iPhone won't be updated soon - sorry Apple.
Now instead of doing useful things I'm dedicating my time for the next couple of days to recovering what you've messed and my kids will just cry for every thing that is not working. I just wish you were in my shoes listening to those screams.

InDesign crashing, newest update fails to install

Is anyone else having trouble with InDesign crashing, and the newest update fails to install?
I have uninstalled InDesign, restarted my macbook, reinstalled, and then tried the update, which says it has an error and fails to install. The current version crashes after asking it to do anything after opening the programme, such as opening a file or trying to select any of the menus.
I use a Wacom Bamboo tablet: could this have anything to do with it? A colleague had a similar issue with Illustrator and the Wacom driver. Would this affect the update installation?
Help appreciated!

Yes, I have just had the same problem on my Spectre X360

Existing SCUP updates fail to install after changing the certificate.

Similar Messages

Maybe you are looking for