Existing Single Sign On Problem with 9iAS rl2

Hi guys
I'm trying to install 9iAS rel2 on XP, when I get the Existing Single Sign-on screen and the port number has been auto-populated with 7777 and Installer is asking me for my host name and domain name, it won't work
My host name is XP3118 the domain that I am connected to is GRID
When I put in XP3118.GRID and click next it says that I need to verify my host and port variables to connect to this host.
Has anyone any ideas?
Thanks
Ciaran

I was informed by Oracle Support that Forms6i would not be supported on any new operating systems i.e. Windows XP and that in order for me to use our client-server application I would have to web-deploy our forms by upgrading to 9iForms and hence need 9iAS rel2.
Can you please clarify how does Oracle intends to support 9iAS on Windows XP since you should not be providing contradictory support statements.
Regards
Ciaran

Similar Messages

I am getting weary of my iPhone 4s. the battery life is non-existent, second, i had problems with calls, the caller couldn't hear me and now it cannot detect internet networks. Be they wi-fi or cellular. what could be the problem.

I am getting weary of my iPhone 4s. The battery life is non-existent, secondly, I had problems with calls, the caller couldn't hear me and now it cannot detect internet networks. Be they Wi-Fi or cellular. what could be the problem?

Mullaly75 wrote:
I assume u guys don't understand what open source software is
Yes, I think most of us do understand what open source software is. It sounds as if you don't. Here's some information:
Open-source software (OSS) is computer software that is available in source code form: the source code and certain other rights normally reserved forcopyright holders are provided under an open-source license that permits users to study, change, improve and at times also to distribute the software.
Open source software is very often developed in a public, collaborative manner. Open-source software is the most prominent example of open-sourcedevelopment and often compared to (technically defined) user-generated content or (legally defined) open content movements.
from http://en.wikipedia.org/wiki/Open_source_software
Yes, Tom Wu of Stanford wrote a paper on something called Secure Remote Access Protocol. It's a form of Asymetric Key Exchange and has nothing to do with hacking anything. It's actually intended to protect data.

Problem with 9iAS and Day Communiquh 3

Hi,
i have a problem with the deployment of Day Communiquh 3 web application (a tool for content management) on Oracle 9iAS (not on the OC4J stand-alone..).
As explained on Day guide, i've disabled the following services in the delivery.xml of publish/system/conf directory (the file is put in attachment for a better comprehension):
- ServletEngineService;
- ShoutService.
Moreover, i've updated the following tags:
- fakeurls, with <redirect from="/" to="/cq3/playground/en.html" />;
- loopback, with the port i use (7778).
Then i have packed up the CQ3 webapp in a WAR file (cq3-web.war): i give you in attachment the WEB-INF/web.xml used.
Finally i have packed up the WAR file in a EAR file, using the Enterprise Manager of 9iAS: i've put "cq3" as name of the deployed application, and "/cq3" as context root, so that users can access the application typing in a browser "http://<server_address>:<port>/cq3".
Then i've found the following problems:
- firstly, "http://<server_address>:<port>/cq3" doesn't redirect to "http://<server_address>:<port>/cq3/playground/en.html" as specified in delivery.xml: a "404 not found" error raises; so i have to type "http://<server_address>:<port>/cq3/playground/en.html" manually to view the Communiquh Playground;
- anyway, the Communiquh Playground isn't shown correctly: every link and every image refers to an address like, for example, "http://<server_address>:<port>/playground/en/my_image.gif", i.e. without the "/cq3" context root in front of "/playground..".
Anyone that could help me to resolve this issue is welcome. Please answer to [email protected]

Hi,
i have a problem with the deployment of Day Communiquh 3 web application (a tool for content management) on Oracle 9iAS (not on the OC4J stand-alone..).
As explained on Day guide, i've disabled the following services in the delivery.xml of publish/system/conf directory (the file is put in attachment for a better comprehension):
- ServletEngineService;
- ShoutService.
Moreover, i've updated the following tags:
- fakeurls, with <redirect from="/" to="/cq3/playground/en.html" />;
- loopback, with the port i use (7778).
Then i have packed up the CQ3 webapp in a WAR file (cq3-web.war): i give you in attachment the WEB-INF/web.xml used.
Finally i have packed up the WAR file in a EAR file, using the Enterprise Manager of 9iAS: i've put "cq3" as name of the deployed application, and "/cq3" as context root, so that users can access the application typing in a browser "http://<server_address>:<port>/cq3".
Then i've found the following problems:
- firstly, "http://<server_address>:<port>/cq3" doesn't redirect to "http://<server_address>:<port>/cq3/playground/en.html" as specified in delivery.xml: a "404 not found" error raises; so i have to type "http://<server_address>:<port>/cq3/playground/en.html" manually to view the Communiquh Playground;
- anyway, the Communiquh Playground isn't shown correctly: every link and every image refers to an address like, for example, "http://<server_address>:<port>/playground/en/my_image.gif", i.e. without the "/cq3" context root in front of "/playground..".
Anyone that could help me to resolve this issue is welcome. Please answer to [email protected]

How do I fix sign in problem with my Yahoo hompage via Firefox browser

The normal browser process, of course, is that when you click on the Firefox icon it opens the browser and automatically signs you in to your preselected home page. Unfortunately I have recently run into a problem with error messages popping up and obstructing this opening process.
Special comment: It started occurring at about the same time my Yahoo mail account was breached and spammed and I had to change my password as a beginning move to counter the account security breach. I am not certain this incident produced my current problem, but it quite possibly related to the cause. It still remains that have to clear the problem, whatever caused it.
These error pop up messages do not occur when I use the Internet Explorer or Chrome browsers, so it certainly appears to be a Firefox browser related issue. I have tried clearing all cookies, enabling and disabling all Java plug-ins and extensions, changing passwords, and nothing has had any effect.
The first pop up window is headlined as, "[JavaScript Application]. It then cites my correct Yahoo username and is followed by this text; "(my username)- Invalid username/password combination. If you continue to get this error, try entering your email address as your username".
Note: Entering my email address as a username did not help either. The username cited in the error
message is the correct username as well.
The second pop up window says,
"We noticed you may have signed in or signed out in another window. Click OK to reload your page".
Note: Clicking the "OK" button does not re-sign in the page. What does happen is that it reloads the generic MY Yahoo home page and then I have to manually sign in to get my personally customized My Yahoo home page.
I have since upgraded to the most current Firefox browser version, but the problem remains the same.
If anyone has any idea on how to remedy this sign-in issue I would appreciate hearing from you.
Thank you

If you had Firefox save your Yahoo password, first try deleting that here:
orange Firefox button ''or'' classic Tools menu > Options > Security > "Saved Passwords"
The "signed out" message seems to be related to how Yahoo authenticates you. Some users have reported that disabling automatic proxy detection solves the problem, and it also resolves an issue of getting logged out every few minutes, if you have ever experienced that.
To make the change:
orange Firefox button ''or'' classic Tools menu > Options > Advanced
On the "Network" mini-tab, click the "Settings" button, then choose "No Proxy" and OK your way back out.
If your work connection requires you to use a proxy server, try the "Use system settings" option instead.
Does that help?

Wireless Network Policy Single Sign On Issue with Windows 8.1 only

I'll try to set this up as best I can. I have a laptop with a fresh Windows 8.1 install on it. It is on my domain, and I have a single GPO applied to it. In the GPO under Computer Configuration -> Windows Settings -> Security Settings ->
Wireless Network Policies I have created a Windows Vista or later policy. In the policy I have configured single sign on. I log into a local account on the laptop and plug it into a wired connection. I then run gpupdate on it. At that point I unplug
the network cable, and log off. Now, from the login screen I click Other user, and it looks like the screenshot below.
Notice that "Windows will try to connect to" is present. I can login using domain credentials, and single sign on works perfectly. Now if I reboot the machine, the "Windows will try to connect to" is gone and single sign
on does not work. If I log in with a local account and log out. The "Windows will try to connect to" is present again. I can login normally using domain credentials, and single sign on works perfectly again.
One other note: I installed a fresh copy of Windows 7 on the same model laptop, and put it in the same OU with that single GPO. Single sign on works perfectly with the Windows 7 machine every time. Including after reboots. Thank you, in advance,
for any advice or comments. I will be happy to provide additional information if it is needed.

I managed to get this to work properly in my environment. I realized that I needed to export the wireless profile from the Group Policy editor and import it on the client (by using Group Policy). I realized this while reading through this article:
https://technet.microsoft.com/en-gb/magazine/2007.11.cableguy.aspx
You can see the "Export..." button in the screenshot posted by keyserag above. Select the profile name, in the Group Policy editor Properties dialog, i.e. the item that keyserag has blurred in his screenshot, then click the "Export..."
button. You will be prompted to save the XML file.
I use Computer Configuration > Preferences > Windows Settings > Files to copy the XML file to the clients:
Destination: %WindowsDir%\WirelessProfileExportFileName.XML
I then use Computer Configuration > Preferences > Control Panel Settings > Scheduled Tasks to run netsh and import the profile:
Action: netsh wlan add profile filename="%WindowsDir%\WirelessProfileExportFileName.XML"
The PCs using my policies are now ready to logon without any need for additional manual actions.
I've left out some detail here, I assume everyone will do something a little different anyway. Let me know if you need more help with this.

Single Sign-on problem

single sign-on is enabled for my developer account.
the following HttpWebRequest...
https://{server}/Services/Integration?command=ssoitsurl&ssoid={sso_token}"
... throws the following exception everytime:
The remote server returned an error: (500) Internal Server Error.
and the following HttpWebRequest...
https://{server}/Services/Integration?command=ssologin&odSsoToken={token}
... throws the same exception almost everytime.
Any help would be greatly appreciated.

user1141276, typically, before you can use SSO Token, you need to call Customer Care to have your company authentication type changed to the appropriate type based on the token requirements (i.e. validation only, or validation with option to create session id).

Oracle Single Sign on Integration with Oracle EBS r12

Hello,
I am working on a project to integrate Oracle Single Sign On on Oracle r12. There is plenty of information available on Oracle Support but few inter-mixing and confusing terminology keeps popping up and I do not understand how all pieces together work. I am new to Oracle Single Sign On.
Here are few basic questions.
1. What is the difference between Oracle Internet Directory, Oracle Virtual Directory and Oracle Active Directory
2. Are the terms Identity Management and Oracle Single Sign On interchangeable? What is the difference between two?
3. What is Oracle Access manager and how different that is from Identity Management?
4. What is Oracle HTTP Server 11g webgate and how different that is from a normal traditional Oracle HTTP Server?
5. What is Oracle EBS Accessgate? Why do I need it? On metalink some notes do not indicate use of Accessgate at all for OSSO deployment while some makes it look like required.And advise on above will help.
Thank you
Darsh

Hi Darsh,
1. Oracle Internet Directory (OID) is Oracle LDAP storage solution (more here), Oracle Virtual Directory is Oracle solution that can read identity data (and filter it (mask it) based on policies) from Oracle/non-Oracle databases, Oracle/non-Oracle Directories and files and provide the user profiles as LDAP view (more here), There is nothing called Oracle Active Directory, you must be referring to Microsoft Active Directory.
2. No, Oracle Single Sign On (OSSO) is a feature in iAS (its obsolete), Identity Management is wide umbrella of solutions and concepts.
3. Oracle Access Manager is one component of Oracle Identity and Access Management suite of products.
4. Webgate is Oracle access Manager agent that is installed on a webtier, it intercepts the web requests and collect the credentails, send them to Oracle Access Manager for security evaluation (decide what Authentication is needed, verify collect credentials, etc), webgate then enforce the Access Manager decision.
5. Oracle EBS AccessGate is a java application that has the same use of OAM Webgate (it is OAM agent) but specific to E Business suite, EBS Access Gate is the new solution replacing OSSO agents, OAM is replacing OSSO server component, EBS and OSSO customers can use OAM server with OSSO agents, or with EBS AccessGate.
HTH.
Ghassan

Installation problems with 9iAS Developer KIT

I have 9iAS installed on one machine with 9iAS infrastructure in it's own home and 9iAS components it's own home.
The Big problem I am having is that each time I try to install the 9iAS developer KIT in 9iAS component home an error about saying cannot install.
So should the 9iAS developer KIT have it's own home? That is different from 9iAS component home on the same maching

I have 9iAS installed on one machine with 9iAS infrastructure in it's own home and 9iAS components it's own home.
The Big problem I am having is that each time I try to install the 9iAS developer KIT in 9iAS component home an error about saying cannot install.
So should the 9iAS developer KIT have it's own home? That is different from 9iAS component home on the same maching

Single Sign-On intergration with 3rd party website portal

A client of ours for whom we have developed a Business Catalyst (BC) website wants their website's users simultaneously authenticated on their own site and also on a MemberSuite member management website portal, which essentially amounts to a Single Sign-On (SSO) solution. Is there any capability within BC to allow a process like this? Any examples of others who have accomplished similar SSO integrations?

There is no out of the box solution but it could be done via in a few ways, it would all depend on what the "membersuite member management website portal" could do. The BC database would have to be the master database in terms of username and password as there is no way to log someone in via an API, depending on how the other software is setup and what sort of output it could give and how it's authentication system worked, can you provide more info?

Lync HP 4120 Sign in problems with Lync Server 2013

Hi, this is my second request for help, this with more information...
I`ll ready install the follow infrastructure: (I change the name of my organization for contoso)
Lync Server 2013 Installation with Enterprise mode with 1 front end : Pool: lync.contoso.com Front End: lyncfe01.contoso.com Back End: lyncsql01.contoso.com
I`ll ready install a PKI infrastructure with two tiers, the root offline and the subordnate ac.contoso.com
This with the defailt algorithm configuration RSA SHA1
My phones are HP 4120
In the Front End Server i configured the SCHANNEL registers:
EnableSessionTicket in 2
Send..etc in 0
Ok, the installation is ok, services are OK, Client login trough PC its OK, PSTN Configuration... (I can make a phonecall with the lync client of Office 365)
Commnd Checks:
When i run the command Test-CsPhoneBootstrap -PhoneOrExt 12345 -PIN 123456 -TargetFqdn lync.contoso.com
The result is:
Target Fqdn : lync.contoso.com
Target Uri : https://lync.contoso.com:443/CertProv/CertProvisioningService.svc
Result : Success
Latency : 00:00:09.0559615
Error Message :
Diagnosis :
When i run the command Test-CsPhoneBootstrap -PhoneOrExt 12345 -PIN 123456 for
check the DHCP the result is:
Target Fqdn : lync.contoso.com
Target Uri : https://lync.contoso.com:443/CertProv/CertProvisioningService.svc
Result : Success
Latency : 00:00:09.0559615
Error Message :
Diagnosis :
When i run the follow command
PS C:\Users\Administrator> $cred = Get-Credential
cmdlet Get-Credential at command pipeline position 1
Supply values for the following parameters:
Credential
PS C:\Users\Administrator> Test-CsClientAuth -TargetFqdn lync.contoso.com -UserSipAddress "sip:[email protected]" -UserCredential $cred
I got this:
Target Fqdn : lync.contoso.com
Target Uri : https://lync.contoso.com:443/CertProv/CertProvisioningService.svc
Result : Success
Latency : 00:00:00.3431783
Error Message :
Diagnosis :
But.. when i use the same command but i remove the -targetFqdn for check the Dhcp i got this:
VERBOSE: Workflow Instance Id 'bca95636-af7b-4b0a-b43d-dba259294b2d', started.
VERBOSE: Command line executed is 'Test-CsClientAuth -UserSipAddress "sip:[email protected]" -UserCredential $cred
-Verbose'.
Target Fqdn :
Target Uri :
Result : Failure
Latency : 00:00:00
Error Message : 10060, A connection attempt failed because the connected party did not properly respond after a period
of time, or established connection failed because connected host has failed to respond 194.90.8.20:5061
Inner Exception:A connection attempt failed because the connected party did not properly respond after
a period of time, or established connection failed because connected host has failed to respond
194.90.8.20:5061
Diagnosis :
VERBOSE: Workflow 'Microsoft.Rtc.SyntheticTransactions.Workflows.STClientAuthWorkflow' started.
Workflow 'Microsoft.Rtc.SyntheticTransactions.Workflows.STClientAuthWorkflow' completed in '5.62E-05' seconds.
Target web service Url not provided. Will have to extract it from authentication challenge.
An exception 'Unable to establish a connection.' occurred during Workflow
Microsoft.Rtc.SyntheticTransactions.Workflows.STClientAuthWorkflow execution.
Exception Call Stack: at Microsoft.Rtc.Signaling.SipAsyncResult`1.ThrowIfFailed()
at Microsoft.Rtc.Signaling.Helper.EndAsyncOperation[T](Object owner, IAsyncResult result)
at Microsoft.Rtc.SyntheticTransactions.Activities.GetSTSUriActivity.InternalExecute(ActivityExecutionContext
executionContext)
at Microsoft.Rtc.SyntheticTransactions.Activities.SyntheticTransactionsActivity.Execute(ActivityExecutionContext
executionContext)
at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext executionContext)
at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
at System.Workflow.Runtime.Scheduler.Run()
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at Microsoft.Rtc.Internal.Sip.TcpTransport.OnConnected(Object arg)
'GetSTSUri' activity started.
Starting STS Uri Discovery...
ERROR getting STS Uri.
'UnRegister' activity started.
'UnRegister' activity completed in '3.12E-05' seconds.
VERBOSE: Workflow Instance ID 'bca95636-af7b-4b0a-b43d-dba259294b2d' completed.
VERBOSE: Workflow run-time (sec): 126.0548512.
The Real Problem is that my Lync HP 4120 Phone can't make a sign in, not from USB cable loging, nor with PIN authentification
When I try to make a login with the USB cable, I set the user and password and the phone says "Connecting to Lync".. "Downloading a certificate" ... "Installing certificate"... "Downloading Certificate"...
"Installing Certificate".. forever
When I try to make a login with PIN Authentification, the phone first displays the following:
Account used is not authorized, Please Contact your support team and then shows this:
An Account matching this phone number cannot be found. Please contact your support team.
The Pin authentification is enable
In the Lync Server Enable Kerberos Authentification, Enable Integrated Windows Authentification and Enable Certificate Authentification are enable
This is the configuration from DHCP
Starting Discovery ...
Sending Packet (Size: 284, Network Adapter: xx.xx.xx.xx, Attempt Type: Broadcast only)
--Begin Packet--
DHCP: INFORM (xid=130EA7FA)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 319727610
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = Xx.xx.xx.xx
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 0.0.0.0
DHCP: Client HW Address (chaddr) = FC15B4###--End Packet--
Received Packet
Sender:xx.xx.xx.xx:67, Size:363
--Begin Packet--
DHCP: ACK (xid=130EA7FA)
DHCP: Op Code (op) = 1
DHCP: Hardware Type (htype) = 6
DHCP: Hops (hops) = 0
DHCP: Transaction ID (xid) = 319727610
DHCP: Seconds (secs) = 0
DHCP: Flags (flags) = 0000
DHCP: Client IP Address (ciaddr) = xx.xx.xx.xx
DHCP: Your IP Address (yiaddr) = 0.0.0.0
DHCP: Server IP Address (siaddr) = 0.0.0.0
DHCP: Relay IP Address (giaddr) = 0.0.0.0
DHCP: Client HW Address (chaddr) = FC15B4100289
DHCP: Server Host Name (sname) =
DHCP: Boot File Name (file) =
DHCP: Magic Cookie = 99.130.83.99
DHCP: Option Field
DHCP: DHCP MESSAGE TYPE( 53) = (Length: 1) DHCP ACK
DHCP: Server Identifier( 54) = (Length: 4) XX.XX.XX.XX
DHCP: Client Identifier( 61) = (Length: 0) ()
DHCP: SIP Server( 120) = (Length: 17) enc:0 lync.contoso.com (00046C796E6306756E69736F6E026D7800)
DHCP: Host Name( 12) = (Length: 0)
DHCP: Vendor Identifier( 60) = (Length: 0)
DHCP: Param Req List( 55) = (Length: 0) 0 0
DHCP: Vendor Info( 43) = (Length: 86) MS-UC-Clienthttpslync.contoso.com443%/CertProv/CertProvisioningService.svcÜNAP (010C4D532D55432D436C69656E7402056874747073030E6C796E632E756E69736F6E2E6D78040334343305252F4365727450726F762F4365727450726F766973696F6E696E67536572766963652E737663DC034E4150)
DHCP: End of this option field
--End Packet--
Result: Success
DHCP Server : xx.xx.x.xx.
SIP Server FQDN : lync.contoso.com
Certificate Provisioning Service URL : https://lync.contoso.com:443/CertProv/CertProvisioningService.svc
thanks for all, hope somebody can help me with this problem.. i am going crazy...

Hi, i connected the Lync Phone to another switch and i update the firmware to the newest firmware and i got the same problem..
The lync phone download the certificate but cant install it and the still the same error with the SIP login
An Account matching this phone number cannot be found. Please contact your support team.

Excel cells appear garbled; either multiple values in single field or problem with redrawing of the cells.

In editing a simple, new Excel 2013 file, I am seeing certain cells with multiple, overlapping values in the a single cell. This is in the A-column so, not a matter of margins. Specificially, in one cell, I had "Design", then replaced
that text with "Reqt". Now I see the word "Reqt" written over "Design". when trying to delete the values, I can remove the "Reqt" value, but the "Design" value will not disappear/delete.
I've tried saving and reopenning the file with no effect; problem persists. Makes me think this is a corrupted .xlsx file, even though I just started from scratch 15 minutes before the problem arose.
I appreciate any guidance (or bug submission) you can support.
V/R,
Kevin

I have successfully inserted seven records in one form submit operation by looping through the command object execute method.
However, the data that is being inserted by the command object is repetition of the first record and the command object is not taking any data from the text boxes for the second record onwards. In this I had used the isert record behavious generated by DW CS4 and modified it to suit my requirement. However, the data inserted in the first row is getting repeated in all the seven rows.
Please help.
Also advise if there are any free dreamweaver server side validation extensions available.

Signed applet problem with 1.3.1 but same workin in jre1.4

Hi,
I have performed the following steps to sign an applet
1. javac search.java
2. jar cvf Search.jar *.class
3. keytool -genkey -alias signFiles -keystore abs_stores -keypass
123456 -storepass 123456
4. jarsigner -keystore abs_stores -storepass 123456 -keypass 123456 -
signedjar SignedSearch.jar Search.jar signFiles
The applet searches for some files in the hard drive.
The problem is when I user Jre 1.4,IE 5.5 the applet works but it does not with
jre1.3.1
I need it to work with jre1.3.1.
can someone help me out.
thanks,
Anshuman

I use the following in HTML
<OBJECT
classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
WIDTH = 350 HEIGHT = 300
codebase="http://java.sun.com/products/plugin/1.3.1/jinstall-131-win32.cab#Version=1,3,1,0">
<PARAM NAME = CODE VALUE = "Search" >
<PARAM NAME = CODEBASE VALUE = "." >
<PARAM NAME = ARCHIVE VALUE = "SignedSearch.jar" >
<PARAM NAME="type" VALUE="application/x-java-applet;version=1.3.1">
<PARAM NAME="scriptable" VALUE="false">
<COMMENT>
     <EMBED
type="application/x-java-applet;version=1.3.1"
CODE = "Search"
CODEBASE = "."
ARCHIVE = "SignedSearch.jar"
WIDTH = 350
HEIGHT = 300
     scriptable=false
     pluginspage="http://java.sun.com/products/plugin/1.3.1/plugin-install.html">
     <NOEMBED>
          </NOEMBED>
     </EMBED>
</COMMENT>
</OBJECT>
thanks,
Anshuman

Problems with 9iAS Infrastructure Installation

hi to all..
I get some problems installing the 9iAS Infraestructure (9.0.2.0.0) in Red Hat 9
when I click on 'Install' button display something like:
Installing Java Runtime Environment
1.1.8.0.0
Link Pending...
Copying README
Status bar ===> 0%
..and never advance
I have checked out my oraInstall.err, look:
java.lang.NoSuchMethodException
     at java.lang.Class.getMethod0(Native Method)
     at java.lang.Class.getMethod(Class.java:888)
     at oracle.sysman.oii.oiif.oiifb.OiifbWizChainDlgElem.setDialogProperties(OiifbWizChainDlgElem.java:980)
     at oracle.sysman.oii.oiif.oiifb.OiifbWizChainDlgElem.doOperation(OiifbWizChainDlgElem.java:645)
     at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:140)
     at oracle.sysman.oii.oiis.OiisCompContext.doOperation(OiisCompContext.java:808)
     at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:116)
     at oracle.sysman.oii.oiic.OiicCompsWizEngine.doOperation(OiicCompsWizEngine.java:172)
     at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:116)
     at oracle.sysman.oii.oiic.OiicInstallSession$OiicSelCompsInstall.doOperation(OiicInstallSession.java:855)
     at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:140)
     at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:519)
     at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:177)
     at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:116)
     at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:349)
     at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:628)
java.lang.UnsatisfiedLinkError: /tmp/OraInstall2005-08-21_11-37-11AM/libactionUnix151.so: /tmp/OraInstall2005-08-21_11-37-11AM/libactionUnix151.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1419)
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1314)
     at java.lang.Runtime.load0(Runtime.java:698)
     at java.lang.System.load(System.java:797)
     at ssOiGenClassux151.<clinit>(ssOiGenClassux151.java:15)
     at sscreateLinkux.createLink(sscreateLinkux.java:201)
     at sscreateLinkux.installAction(sscreateLinkux.java:63)
     at oracle.sysman.oii.oiis.OiisCompActions.doActionWithException(OiisCompActions.java:1143)
     at oracle.sysman.oii.oiis.OiisCompActions.doActionImpl(OiisCompActions.java:975)
     at oracle.sysman.oii.oiis.OiisCompActions.doAction(OiisCompActions.java:550)
     at Components.oracle.swd.jre.v1_1_8_0_0.CompActions.doAction(CompActions.java:66)
     at Components.oracle.swd.jre.v1_1_8_0_0.CompInstallPhase1.doActionP1createLink3(CompInstallPhase1.java:285)
     at Components.oracle.swd.jre.v1_1_8_0_0.CompInstallPhase1.stateChangeActions(CompInstallPhase1.java:77)
     at Components.oracle.swd.jre.v1_1_8_0_0.CompActions.stateChangeActions(CompActions.java:33)
     at oracle.sysman.oii.oiic.OiicInstallActionsPhase$OiilActionThr.run(OiicInstallActionsPhase.java:578)
     at oracle.sysman.oii.oiic.OiicInstallActionsPhase.executeProductPhases(OiicInstallActionsPhase.java:2259)
     at oracle.sysman.oii.oiic.OiicInstallActionsPhase.doInstalls(OiicInstallActionsPhase.java:2112)
     at oracle.sysman.oii.oiic.OiicInstallActionsPhase$OiInstRun.run(OiicInstallActionsPhase.java:3020)
     at java.lang.Thread.run(Thread.java:484)
Before installing, I set the LD_ASSUME_KERNEL to 2.4.20 (export LD_ASSUME_KERNEL=2.4.20)
what can I do? please help..
thanks!!
benek, hackerss.com

Additional, this is the last message in the installActions.log :
Llamando acción unixActions2.1.0.8.0 createLink
     source = /opt/jre/1.1.8/bin/.java_wrapper
     destination = /opt/jre/1.1.8/bin/jre
     overwriteExistingLink = true
How many time that this actions requires? I have waited for 30 minutes, and it's still in 0%
thanks again!
benek

Youtube sign in problem with Ipod touch 4

Hi,
When i am trying to sign in the app Youtube on Ipod touch 4, after i enter correctly my Youtube username and password it said "U must sign in to Youtube's website to continue " . Then i click on sign in , it takes me to safari youtube website, i enter my youtube and password again. Then it just openned my account in the web but not the YouTube APP . So basically with the Youtube APP, i cant do anything with my youtube account. Can you give me some thanks what is wrong with it ??
Thanks

I was having the same problem. The solution is for the user name, make it your gmail address, @gmail.com
so [email protected] should be the user name
that worked for me.

Apex upgrade to 4.0 and existing Single-Sign-On settiongs

Hi,
I'm currently using SSO (Apex engine registered as partner application in Oracle SSO) with Apex 3.1 and have couple of Apex apps using Oracle SSO.
If I upgrade to Apex 4.0, will my current configuration be untouched or do I need to re-register Apex in SSO?
Thanks in advance,
Asha

Hi Jason,
Thank you very much for your prompt response. Yes. I did run those steps. I just reran all steps. See below output.
SQL> connect / as sysdba;
Connected.
SQL> alter session set current_schema = apex_sso;
Session altered.
SQL> grant execute on wwsec_sso_enabler_private to APEX_040000;
Grant succeeded.
SQL> grant select on wwsec_enabler_config_info$ to APEX_040000;
Grant succeeded.
SQL> alter session set current_schema = apex_040000;
Session altered.
SQL> create synonym wwsec_enabler_config_info$ for sso.wwsec_enabler_config_info$;
create synonym wwsec_enabler_config_info$ for sso.wwsec_enabler_config_info$
ERROR at line 1:
ORA-00955: name is already used by an existing object
SQL> create synonym wwsec_sso_enabler_private for sso.wwsec_sso_enabler_private;
create synonym wwsec_sso_enabler_private for sso.wwsec_sso_enabler_private
ERROR at line 1:
ORA-00955: name is already used by an existing object
SQL> @/u01/app/oracle/product/10.2.0/db_1/apex/core/custom_auth_sso_902.sql
...wwv_flow_custom_auth_sso
Package created.
No errors.
SQL> @/u01/app/oracle/product/10.2.0/db_1/apex/core/custom_auth_sso_902.plb
...wwv_flow_custom_auth_sso
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY WWV_FLOW_CUSTOM_AUTH_SSO:
LINE/COL ERROR
132/5 PL/SQL: Statement ignored
151/37 PLS-00201: identifier 'WWSEC_SSO_ENABLER_PRIVATE' must be
declared
287/9 PL/SQL: Statement ignored
287/9 PLS-00201: identifier 'WWSEC_SSO_ENABLER_PRIVATE' must be
declared
Thanks a lot,
Yi

Existing Single Sign On Problem with 9iAS rl2

Similar Messages

Maybe you are looking for