Existing time machine backup wont work when my drive is attached to my airport base station

I did a full time machine backup to my external hard drive via usb (for speed) and then connected the drive to my airport base station. I can see the drive and the backup folder, but time machine wont continue using that backup and just wants to start a new one! Is there anyway I can make the existing backup usable without having to do the whole lot via wifi! I've looked throught communities but had no luck as of yet!

You can't switch from local to network backups.  See the blue box in #E2 of Time Machine - Troubleshooting.
And, I hate to have to tell you this, but backing-up to a USB drive on an Airport Exteme is unreliable and not supported by Apple.   See:  Using Time Machine with an Airport Extreme Air Disk.

Similar Messages

  • How to keep using existing Time Machine backup after replacing main hard drive

    The hard drive in my iMac (Lion) is failing. I cloned it to a new drive and installed it in the iMac. Now the system wants to start fresh with a whole new Time Machine backup.
    It seems obvious that there must be a way to keep using the existing Time Machine backup set, but I can't figure out how to do it. Help, please.

    If you had done a full system restore from Time Machine, it would have been done automatically.  But 3rd-party cloning apps don't leave a "trail" so Time Machine can figure out that the new drive has all the old stuff on it.
    Effective with Lion, there is a way to "associate" the new drive with the backups of the old one, but it requires the use of Terminal.  See #B6 in Time Machine - Troubleshooting.  As noted though, this only works on directly-connected backup drives, not backups made over a network.

  • Time machine backup wont work anymore:(

    My backup wont backup any more, I clicked on the i next to the Failed message, and it said, that the files seem to be in "read only" how do I change it so it will work?
    Thanks

    See #C6 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).

  • Is there any way to create a time machine backup to an external hard drive with content already on it?  I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?

    Is there any way to create a time machine backup to an external hard drive with content already on it?  I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?

    It would be much better if you had separate drives for the pictures and Time Machine backups.....but, if you want to use the same drive for both purposes, temporarily move the folder with the pictures to another location for safe storage.
    Run the Time Machine backup on the hard drive and verify that everything is working correctly. Time Machine will format the disk for you in Mac OS Extended (Journaled) as part of the backup process.
    Then move the folder with the pictures back to the hard drive with the Time Machine backups.
    When you have tested to make sure that everything is working again, then and only then should you delete the folder with pictures from the temporary storage area.
    Again....it would be much better to keep Time Machine backups on a drive just for that purpose, and other data on another drive for that purpose. This is clearly one of those times when the fact that you can do something does not mean to imply that you should do it.

  • Time Machine backups only work after restart

    Hi
    Getting frustrated as Time Machine backups only work after a restart. Work for a few hours and then get stuck with Backing up: XXMB of XXGB. I have left it on this for many hours ie overnight without completion
    I have a Mid 2014 MBP 13 in running 10.10.2
    I backup onto an external USB via a hub.
    Things I have tried with review of Pondini great site which has helped with different TM backup problems.
    Disk permissions and repair of SSD on MBP (were errors but did not solve issue)
    Direct USB connection
    Backup via Airport Extreme
    Re-index spotlight
    Reformat USB disk
    New USB disk!
    Below is log (backupd filtered) of latest backup attempts including final completed occuring after restart.
    Any help gratefully received
    19/03/2015 12:59:07.730 pm
    com.apple.prefs.backup.remoteservice[2916]
    Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
    19/03/2015 12:59:10.238 pm
    com.apple.xpc.launchd[1]
    (com.apple.backupd-auto) Unknown key for Boolean: ForceEnableHack
    19/03/2015 12:59:10.240 pm
    UserEventAgent[16]
    com.apple.backupd-auto launchd job enabled
    19/03/2015 12:59:10.238 pm
    com.apple.xpc.launchd[1]
    (com.apple.backupd-helper.status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    19/03/2015 12:59:10.239 pm
    com.apple.xpc.launchd[1]
    (com.apple.backupd-auto) This service is defined to be constantly running and is inherently inefficient.
    19/03/2015 12:59:23.162 pm
    com.apple.backupd[2929]
    Starting manual backup
    19/03/2015 12:59:23.358 pm
    com.apple.backupd[2929]
    Backing up to /dev/disk2s1: /Volumes/TIMEMACH/Backups.backupdb
    19/03/2015 1:01:55.000 pm
    kernel[0]
    process backupd[2929] thread 893245 caught burning CPU!; EXC_RESOURCE supressed due to audio playback
    19/03/2015 1:12:00.297 pm
    com.apple.backupd[2929]
    Will copy (Zero KB) from Macintosh HD
    19/03/2015 1:12:00.350 pm
    com.apple.backupd[2929]
    Found 221479 files (439.9 MB) needing backup
    19/03/2015 1:12:01.050 pm
    com.apple.backupd[2929]
    2.33 GB required (including padding), 554.92 GB available
    19/03/2015 1:21:04.659 pm
    com.apple.xpc.launchd[1]
    (com.apple.backupd-status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    19/03/2015 1:21:04.659 pm
    com.apple.xpc.launchd[1]
    (com.apple.backupd.status.xpc) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    19/03/2015 1:21:04.659 pm
    com.apple.xpc.launchd[1]
    (com.apple.backupd-helper.status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    19/03/2015 1:21:04.659 pm
    com.apple.xpc.launchd[1]
    (com.apple.backupd-auto) This service is defined to be constantly running and is inherently inefficient.
    19/03/2015 1:21:51.062 pm
    com.apple.backupd[167]
    Starting manual backup
    19/03/2015 1:21:51.380 pm
    com.apple.backupd[167]
    Backing up to /dev/disk2s1: /Volumes/TIMEMACH/Backups.backupdb
    19/03/2015 1:24:40.000 pm
    kernel[0]
    process backupd[167] thread 7580 caught burning CPU! It used more than 50% CPU (Actual recent usage: 53%) over 180 seconds. thread lifetime cpu usage 90.616005 seconds, (29.940993 user, 60.675012 system) ledger info: balance: 90000913400 credit: 90000913400 debit: 0 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 169146762635
    19/03/2015 1:24:40.821 pm
    spindump[507]
    Saved cpu_resource.diag report for backupd version ??? (???) to /Library/Logs/DiagnosticReports/backupd_2015-03-19-132440_David-Henshaw-Work-Ma cbook.cpu_resource.diag
    19/03/2015 1:34:29.100 pm
    com.apple.backupd[167]
    Will copy (Zero KB) from Macintosh HD
    19/03/2015 1:34:29.155 pm
    com.apple.backupd[167]
    Found 221268 files (493.5 MB) needing backup
    19/03/2015 1:34:29.235 pm
    com.apple.backupd[167]
    2.39 GB required (including padding), 554.92 GB available
    19/03/2015 1:35:57.393 pm
    com.apple.backupd[167]
    Copied 5145 items (486.8 MB) from volume Macintosh HD. Linked 21319.
    19/03/2015 1:36:33.451 pm
    com.apple.backupd[167]
    Created new backup: 2015-03-19-133632
    19/03/2015 1:36:39.933 pm
    com.apple.backupd[167]
    Starting post-backup thinning
    19/03/2015 1:36:39.943 pm
    com.apple.backupd[167]
    Error: Error Domain=NSOSStatusErrorDomain Code=-50 "The operation couldn’t be completed. (OSStatus error -50.)" (paramErr: error in user parameter list) deleting backup: /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-19-132152.inProgress/2AC908D9-122D-4267-9652-74A9DC6C8795
    19/03/2015 1:36:39.944 pm
    com.apple.backupd[167]
    Error: Error Domain=NSOSStatusErrorDomain Code=-50 "The operation couldn’t be completed. (OSStatus error -50.)" (paramErr: error in user parameter list) deleting backup: /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-19-132152.inProgress/A01A1A4C-F424-4F99-9466-6A5F571CE4F5
    19/03/2015 1:36:53.268 pm
    com.apple.backupd[167]
    Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-125436 (10.4 MB)
    19/03/2015 1:37:05.844 pm
    com.apple.backupd[167]
    Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-115428 (20.6 MB)
    19/03/2015 1:37:12.476 pm
    com.apple.backupd[167]
    Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-102131 (1.5 MB)
    19/03/2015 1:37:12.476 pm
    com.apple.backupd[167]
    Post-backup thinning complete: 3 expired backups removed
    19/03/2015 1:37:12.495 pm
    com.apple.backupd[167]
    Backup completed successfully.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
    You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1295 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1536 450 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 25 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n    ...and %s more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n    "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /^ +iP.+:$/{ s/://;b0'$'\n'' };/es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^  |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') exit;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' ' NR<='${p[26]}' { o=o"\n"$0;next;} { o="";exit;} END{print o|"sed 1d"} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |ect pas|fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' '~ "kMDItemKind=Package"' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {System,Login,Agent,User}' services '{load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} Data\ packages );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0;    };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((i==2&&j==1))&&break;((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;D4 76 24 88;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B6 14 0 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B4 0 0 123;B3 23;A2 39 57 30;B6 23 0 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
    [Process started]
            Part 1 of 8 done at … sec
            Part 8 of 8 done at … sec
            The test results are on the Clipboard.
            Please close this window.
    [Process completed]
    The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
    Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
    12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
    Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Why is Time machine backup not working after Mavericks upgrade?

    Why is Time machine backup not working after Mavericks upgrade?

    I had the same problem due to the Fire Wire port.  Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device.  I find it strange that as soon as I installed Mavericks.  The drive does work using USB.  It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

  • I have had to reinstall my Mavericks OS and use a Time Machine backup. Now when I open InDesign I get Error:5 , AMT subsystem failure. Do you know a fix for this?

    I have had to reinstall my Mavericks OS and use a Time Machine backup. Now when I open InDesign I get Error:5 , AMT subsystem failure. Does anyone have a fix for this?

    I have had to reinstall my Mavericks OS and use a Time Machine backup. Now when I open InDesign I get Error:5 , AMT subsystem failure. Does anyone have a fix for this?

  • HT201250 existing Time Machine backups to a new Mac

    how do i migrate existing time machine backups to a new mac from my time capsule?

    It took a little more research, but that link in the end solved my problem.  After mounting the Time Capsule and the previous backup sparsebundle, I ran these commands to inherit the old backup (with <capsule> and <machine> representing the names of the Time Capsule and machine/hard drive respectively:
              sudo tmutil inheritbackup /Volumes/<capsule>/<machine>.sparsebundle
              sudo tmutil associatedisk -a / /Volumes/Time\ Machine\ Backups/Backups.backupdb/<machine>/2012-12-09-114511/<machine>
              sudo tmutil setdestination /Volumes/<capsule>/
    "2012-12-09-114511" was the latest snapshot that was there.  According to the documentation, you can pick any snapshot, since the "-a" in that command will update all of the associated snapshots.

  • 6th Generation Airport Extreme Freezing During Time Machine Backups using LaCie 1TB Hard Drive

    I recently upgraded from a 4th generation Airport Extreme (short, dual band n) to a new 6th generation Airport Extreme (tall, dual-band ac) in the hopes of having quicker backups and better WiFi performance (I also just got a 13" retina MacBook Pro).
    The upgrade has gone poorly, to say the least. Initially, I set up the new Airport Extreme as I had for the old one. Then I plugged in the same hard drive I was using (a LaCie 1 TB d2 Quadra USB2 drive that I bought in June of 2009). I decided to setup my wife's Time Machine backup first (she has a 2010 MacBook Air). I removed the "old" disk (the one associated with the old base station) from her Time Machine configuration, and set up her Time Machine configuration to backup to the same disk on the new Airport Extreme. I was pleasantly surprised to find that it picked up her existing Time Machine backup and incrementally synchronized to it (the backup size was about 300 MB). A few days later, she warned me that Time Machine told her that backups were not working. When I went to look, it was indeed failing.
    I tried a few things that didn't work, and I suspected that maybe the backup "transfer" hadn't gone so smoothly as it seemed, so I decided to erase the drive using Disk Utility and start the backup over again. To my disappointment, I found that the backup got about 200MB-1.5GB into the backup and "froze." I left it overnight, and it was at exactly the same place the next morning. The light on the disk connected to the Airport Extreme flashed constantly all the time, and I could hear it spinning, but nothing happened at all.
    When I tried to stop the backup, it took a very long time. In the logs, I would see a message like this (this log is from my machine, not my wife's, but it looks the same):
    11/19/13 9:40:59.276 PM com.apple.backupd[93334]: Forcing deep traversal on source: "***-mpbr" (device: /dev/disk0s2 mount: '/' fsUUID: 7356274E-D28F-3BC0-9CA8-7F1AA21830B4 eventDBUUID: 99941F9A-AD5F-4FAF-94D2-701C94CA9581)
    11/19/13 9:41:57.609 PM com.apple.backupd[93334]: Total content size: 148.2 GB excluded items size: 17.16 GB for volume ***-mpbr
    11/19/13 9:41:57.610 PM com.apple.backupd[93334]: Found 674166 files (131.05 GB) needing backup
    11/19/13 9:41:57.611 PM com.apple.backupd[93334]: 152.52 GB required (including padding), 498.67 GB available
    11/19/13 9:41:57.625 PM com.apple.backupd[93334]: Waiting for index to be ready (100)
    11/19/13 9:59:22.407 PM UserEventAgent[11]: com.apple.backupd-auto launchd job disabled
    11/19/13 10:00:15.103 PM com.apple.backupd[93334]: Cancellation timed out - exiting
    Looking at the Airport Extreme in Finder, I saw that it got stuck, either "Connected as" me, or "Connecting...". The Airport Extreme wouldn't respond to the "Disconnect" or "Connect As..." buttons (depending on the context), and the eject button for the Airport Extreme itself in the sidebar was also unresponsive. Eventually, after 2+ minutes, I got a dialog saying "Couldn't connect to [my base station name]" with instructions to "check its IP" and contact my system administrator if the problem persists. During this time, Finder can seem frozen and unstable.
    Through all of the above, the hard disk kept spinning and the light flashed constantly. The drive was warm to the touch in the morning.
    I also found that when all this happened, I was unable to connect to the Airport device using Airport Utility. I I couldn't administer it, but the Internet continued to work for all connected devices. Unplugging the disk and plugging it back in worked immediately to bring the system back to a working state. I didn;t even have to power-cycle or reset the Airport Extreme.
    I tried a number of things to correct this behavior:
    Disabled Time Machine, removed disk, restarted machine, reconfigured Time Machine, and retried.
    Tried backup on my 13" Retina MacBook Pro and my wife's MacBook Air.
    I actually tried with TWO new 6th Generation Airport Extremes. The first one was a refurbished one. I returned it to Apple and purchased a brand new one. Both of them exhibited the behavior I described above.
    Workaround:
    Finally, I switched the drive out for a spare that I have (an older Western Digital MyBook and used it for a backup. This drive "Just worked."
    So, I have switched to that for backup for now, and re-purposed the LaCie as a drive that I use for making periodic images of my hard drive using SuperDuper. The drive seems to work perfectly (and worked perfectly for several years with older Airport Extreme base stations), so I can only assume there's a bug in the USB driver of the current 6th-generation Airport Extreme.
    I hope this helps someone else who's as confused as I was. If anyone has had a similar experience, I would very much like to read about it. I will be reporting this problem to apple right after I post this topic. Please do the same if you experience this issue.

    As Bob says, backing-up that way isn't supported.
    It's also unreliable. It may work for a while, but this forum, and the Time Machine forums, have many, many posts like this:
    *"I've been backing-up via an Airport Extreme for* <some number of days, weeks, or months> *and all of a sudden my backups are corrupted beyond repair."*
    In my case, it's happened about 4 times in a year. And that's with a desktop Mac, about 12 feet from the Airport, with the exact same hardware in exactly the same place and no interference.
    It is very convenient, especially with laptops. If you want to take the risk, see [Using Time Machine with an Airport Extreme Air Disk|http://web.me.com/pondini/Time_Machine/Airport.html] (or use the link in *User Tips* at the top of this forum).
    But do yourself a LARGE favor and take the prominent advice to keep secondary backups, and update them frequently. Sooner or later, you're probably going to need them.

  • Time Machine Backup transfer to another external drive

    Hi all,
    I keep my Time Machine backups on an external HDD drive (portable USB).  I have a larger drive with more space, and wanted to copy my the backup to the larger drive.
    My the Time Machine backup file folder is around 750GB.  When copying the Backups.backupdb file over to the new HDD the process hangs in Finder.  I wonder if there a way to successfully copy it, since the Finder does not seem happy to work with such large chunks of data.
    Thanks

    Although Apple documentation says you can copy Time Machine backups in the Finder, it's very slow and sometimes doesn't work at all.
    This technique will only work if the volume you're copying to is the same size, or larger than, the one you're copying from.
    First, open the Time Machine preference pane and click the Select Disk... button. You may have to unlock the settings first by clicking the padlock icon in the lower left corner of the window. Authenticate as an administrator.
    Delete the volume you're going to copy from the list of backup destinations. Then turn Time Machine OFF.
    Launch Disk Utility, open the built-in help, and search for the term "Duplicate." Follow the instructions. All existing data on the destination volume will be erased. That shouldn't be a problem, because you don't want to mix backup and non-backup data on the same drive anyway.
    If the volume you're copying was encrypted by Time Machine, you may have to unlock it first. Click the Unlock button in the toolbar of the Disk Utility window.
    Turn Time Machine back ON and select the new volume as a backup destination. You can also continue to use the old volume, if you wish. The two will be alternated when both are available.
    CAUTION: If the volume you're copying is corrupt, as shown by Repair Disk or Verify Disk in Disk Utility, then that corruption will be copied to the new drive. Don't copy data from a corrupt volume on a malfunctioning drive. Put the drive aside and don't use it until you're sure you'll no longer need the data. Then securely erase it and take it to a recycling center. Do the same if the Restore operation fails with "disk errors."

  • Can time machine backups be migrated to another drive?

    I'm intersted in moving my time machine backups from one external hard drive to another with larger capacity. How can I do this and still have access to the older backups? Neither of the drives are Time Capsule and they both have USB and FireWire compatibility.

    What I've done - on numerous occassion when moving my TM backups from a drive of a lower capacity to ones with a higher capacity - is use Carbon Copy Cloner to make block copies of the data from one drive to another. I've moved from a 1TB drive to a 2TB drive to a 4TB drive and never had any problems. Just select the 'new' TM drive in System Preferences and the backups just take up where they left off.
    ALWAYS turn Time Machine OFF when making the copy - just so it doesn't get 'confused'.
    Then turn Time Machine back on and point it to the 'new' drive or drives.
    There are likely other methods, but this one has worked for me.
    See http://pondini.org/TM/27.html.
    Good luck,
    Clinton

  • HT201250 How can I migrate a Time Machine backup from an external hard drive to a new TimeCapsuls?

    I just got a 2TB Time Capsule.  I want to migrate my time machine backups on an external hard drive to the new Time Capsule.  I have about 430Gb of files to back up; I don't want to wait 7-8 days for the backup, unless I have to.  I am using OS 10.7.5 (forget which cat that is).  I have mounted the TC drive as 10.0.1.1; I tried to drag and drop from old to "data" on TC, but I get the error "The volume is the wrong format for a backup."  Any ideas how I can move my old files to the new, and bypass creating a brand new backup file?
    Thanks.

    Rather than do that, which means starting over from scratch, losing all your edits, organisation and so on, why not simply use iPhoto Library Manager to revert the Library to the older version? Easier, less destructive.
    The instructions on that are here
    If you really want to start over: you can access the Originals folder simply by going to your Pictures Folder and finding the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.

  • I had to reformat my OSX 10.5.8 and i can't restore my emails from my time machine backup from an external hard drive - only the latest (post backup) time machine back ups are available to restore. Please can any help

    I had to reformat my OSX 10.5.8 and I can't restore my emails from my time machine backup from an external hard drive - only the latest (post backup) time machine back ups are available to restore. Please can any help? I can find the mail folder in my libraries, but the Restore Button is grayed out

    OSX treats the reformatted drive as a different one; it's the same as replacing it, and the old one is no longer connected.
    See #E3 in  Time Machine - Troubleshooting to see and restore from the "old" drive.
    And, you may not want to restore via the Finder; see the blue box in #15 of  Time Machine - Frequently Asked Questions.

  • I threw out 24 time machine backups from an external hard drive into my desktop trash and now I can't empty my trash.

    I threw out 24 time machine backups from an external hard drive into my IMac desktop trash and now I can't empty my trash.

    Since you didn't mention what type of error message you were seeing, I'm going to guess on what is happening.
    I'm guessing that since you threw away Time Machine backups, that Time Machine is probably active on your Mac. There is a chance then that the files you tossed are marked as in use. You can't delete files that are in use.
    Try turning Time Machine off, then restart your Mac. Then try deleting them again.
    Once done, turn Time Machine back on.
    Tom

  • Is there a way to get my photos off an old time machine backup from an external hard drive?

    Is there a way to get my photos off an old time machine backup from an external hard drive?

    You will have to connect the Time Machine HDD and click on the Icon.  You will see one folder called Backups.backupdb.  Click on that and you will have to continue until you find the home folder.  The iPhoto library (where the pictures are, not the application) will probably be in your pictures folder.  You will have to drag that to your desk top.  Then you will have access to individual images.
    Ciao.

Maybe you are looking for