Exit a function in JSP

How can I exit a function in JSp
my code is
<%! String Dothis(int level)
if(level==2)
//exit the function
else
%>
How can I exit this function .....
Break label does not work...as I am not able to declare a label
Pl...guide me
smita

Looking into ur code ,,,, U can do it like the following in addition to solutions posted above ( Exception and return)
<%! String Dothis(int level)
if(level != 2)
%>
Thanks
Sampath ...

Similar Messages

IP - Is it possible to call exit planning function from ABAP Report..

Hi All,
Greetings.
Is it possible to call exit planning function from ABAP Report (t-code SE38) ? Or I mean is not limited only to be called from ABAP Report, perhaps from BSP / Web-Dynpro / Function Module.
If somebody here has been doing it before, I'm keen to ask to kindly share it. Particularly how to call and transfer data to that exit function.
Or if somebody has done in BPS, appreciate if it can be shared too .
Thanks a lot and have a good day,
Best regards,
Daniel N.

Hi.
You can achive this as suggested by Mattias in your previous post.
Lets say you have next data structure:
CostCenter | Amount | PercentForDistibution |
Create input ready query in this format. Restrict cost center by variable type range.
Create WAD with analysis item.
When you run web page you enter range of cost centers (lets say you will enter 101004 to 101010).
I assume you have data only for 101004 in your cube (lets say 1000).
You will see only one record in your webpage.
CostCenter | Amount | PercentForDistibution |
101004       | 1000     | NOTHING
When you create WAD in analysis item properties set "NUMBER_OF_NEW_LINES" to lets say 1 (so in WAD you will see always one blank line for entering new data).
Just add 6 new records:
CostCenter | Amount   | PercentForDistibution |
101005       | NOTHING| 10
101006       | NOTHING| 30
101007       | NOTHING| 20
101008       | NOTHING| 25
101009       | NOTHING| 5
101010       | NOTHING| 10
Then run planning FOX function like this:
FOREACH Z_COST_CENTER.
IF {Amount, Z_COST_CENTER} <> 0
Z_AMNT_TO_DISTRIBUTE = {Amount, Z_COST_CENTER}.
ENDIF.
ENDFOR.
FOREACH Z_COST_CENTER.
IF {PercentForDistibution Z_COST_CENTER} <> 0.
{Amount, Z_COST_CENTER} = Z_AMNT_TO_DISTRIBUTE * {PercentForDistibution Z_COST_CENTER}.
ENDIF.
ENDFOR.
It is not perfect FOX, but as an idead, it should work.
Regards.

How to call java script function from JSP ?

how to call java script function from JSP ?

i have function created by java script lets say x and i want to call this function from jsp scriplet tag which is at the same page ..thanks

Access session variable in Java Function in JSP

Hi Experts !!
I am developing an application using STRUTS MVC...
Very sorry if u have problem understanding my question, i ll try to improve... and sorry if i can't post codes here
Basic question is ....
I want to open a word document on pageLoad of JSP, the word document is not a single document, there is a form in which there is a "name" and "template" whenever user clicks on a button there is one action attached to it which creates a copy of that template in a different folder.. on the next page OnLoad i want to open that particular document. for that i have created a variable and also have set in the session, just want to access it in the below code.
I have a formbean in which i have a variable, the scope is session, that variable i have put it in session also. but i want to access that variable in a "java function" in JSP so that "onLoad" page that function should work.
JSP---
<script type="text/javascript">
function openDocument() {
var w = new ActiveXObject("Word.Application");
var docText;
var obj;
var a;
if (w != null) {
w.Visible = true;
obj = w.Documents.Open(I HAVE TO ACCESS THAT VARIABLE HERE);
</script>
FORMBEAN----
public class CreateSOWFormBean extends ActionForm {
private String workflowName;
private String comment;
private String sowTemplate;
private String sowFileCreated;
public String getSowFileCreated() {
return sowFileCreated;
public void setSowFileCreated(String sowFileCreated) {
this.sowFileCreated = sowFileCreated;
sowFileCreated is the variable that i have accessed in session and that value i have to pass in that function in JSP....
I am aware of something like
obj = w.Documents.Open(<%'sowFileCreated'%>);
but i m not sure how to write....
Plz help.....

If you're working under a framework like struts you should definitely be using JSTL tags rather than scriptlet code to access variables within the page. With JSTL code <% codes can be almost entirely avoided.
To transfer a value from a Servlet to a JSP don't use a session variable, use a request attribute. Session variables should only be used when values have to survive from one transaction to another.
You can write something like:
obj = w.Documents.open('<c:out value="${openURL}"/>');in the Javascript portion of your JSP.
Just beware of potential problems with quotes. The coresponding code in the Servlet would be like:
request.setAttribute("openURL", openUrl);

Which category screen exits and function exit come

Hi ,
I have created an enhancement in ECC 6.0 system on screen exit and function exit for LM00 tcode. now i want to update my developed object in Solution manager.
Anyone pls help me under which category this enhancement project falls.

Thanks everyone for the prompt response.
The scenario is thet I have 190 CMOD projects and I needa quick way to find out which of the function exits in the CMOD projects have been implemented and which are the Z includes in these implemented function exits.
Doing it one-by-one would take too much time. TADIR does not give the function exits and the includes in them.
Need a quick way of identifying the implemented function exits, and the includes in the function exits, from the CMOD project name.
Peter

How to realize print function in JSP

How to realize print function in JSP? I know use Javascript:window.print() can print,but it will print whole page,it don't fit me;Another method is to write JSP into Excel and then print it in Excel,but it don't fit me too,because it don't print directly. Anybody know how to print it directly?

Many websites offer a "printer friendly" version of a certain page. That IMO is the only way to solve your problem, next to using CSS to use a different style for printer output. Here is a tutorial that covers this:
http://www.alistapart.com/stories/goingtoprint/

How to write printing function using JSP?

dear all,
i want to add a printing function in my project but i do not know how to do it? could anyone teach me how to do it?
thanks
eric

salut eric,
you can do it this way :
1 - create a html link in your code to this javascript
function : (I am using Struts, but you can write it in
pure html
<html:link href="#bodyStart"
onclick="openWindowForPrinting()"
titleKey="msg.status.print"> <bean:message
key='app.print' />
<script language="JavaScript">

</script>
</html:link>
>
>
2 - here is the javascript function : it open a window
with the "print.jsp" page.
function openWindowForPrinting(){
window.open('/your_project/pages/common/print.jsp','',
'left=150, top=150 , status=no, directories=no,
toolbar=no, menubar=yes, location=no, scrollbars=yes,
resizable=yes, dependant=yes');
3 : here is the print.jsp page : You have only to
create a session variable called
"currentBodyRelativeLocation", which content the
relative URL to the page you want to print (for
example, the boby of the current page).
<%@ taglib uri='/WEB-INF/tlds/perso.tld'
prefix='perso' %>
<html>
<head>
<perso:csslink page='${cssRelativeLocation}' />
</head>
<body onload="var SymTmpWinOpen = window.open; window.open = SymWinOpen; printPage();; window.open = SymTmpWinOpen;">
<body>
<jsp:include page="${currentBodyRelativeLocation}"/>
</body>
<script language="JavaScript">

</script>
</html>
<script language='javascript'>
function printPage(){
window.print();
window.close();
</script>
hai,
i'm not very understand how is your code work. when i write html code, do i need to mind about this code: "msg.status.print" ? what is this code mean?
i have too much question on this thing. would you mind to be further explain to me? or is it any reference for me to refer? i'm really new to write printing function on JSP.
i never write this function before. i'm feel so lost.....:(
thanks again
eric

Difference between User Exit & a Functional Module

Dear all,
Please help me in understanding ,what's an User Exit & a Functional Module in
standard SAP.How do we define both of them.
1.When can/cannot I use an user exit?How to check for which T codes in PP
Module an User Exit can be used or present.
2.Can I use only a Functional Modules for Z developments or also an user Exit for
Z developments?
Please explain it in a simple way.
It will be a great help for me,Expecting for your help.
Regards
Mangal

user exit is a customised code used to extend or change normal SAP functionality.FM is a piece of reusable code uesed as a part of modularisation technique in SAP so that you can use this code again & again.
1. you create FM through se37. First create function group which in return will contain your FM. you creates user exits through SMOD and CMOD. In case of some standard programs there are special includes where you can add u r own code to extend standard functionality. ( in pro sapmv45a include sapmvfzz used).
to find an exit go to se80 or se84 give the package name and find exit corresponding to it ( ex for sales exits give package VA then search for exit )
for second point i didnt get get what u want to know?
for any z development u dont need at all to use exits u can do it thru SE38.USER-EXIT is add on functionality to customise u r standard transaction.
i hope this will clear u r doubt.reward points if helpful.
Rushikesh

Passing values to JavaBean function using jsp scriplet

Hi,
I have a JavaBean funtion that is SaveData(parameters)
which save the values from HTML form.
Now i want a code for pass the values from HTML form to SaveData() function using jsp scriptlet.
I used the code
<jsp:useBean id="JDBC" class="bean.JDBCBean" scope="application"></jsp:useBean>
<%=JDBC.saveData(phonenumber,manufacturer,model,email,country,newsletter)%>
Here
JDBCBean -> Bean Name
phonenumber,manufacturer,model,email,country,newsletter ->HTML form's text values
But it didnt work properly.
Anyone help me to correct this.

Hi,
i have the same code like above
I have to pass the parameters with form name under the following code.
<jsp:useBean id="JDBC" class="bean.JDBCBean" scope="application"></jsp:useBean>
<%=JDBC.saveData(registration.phonenumber.value,id_type.value,id_style.value,registration.email.value,registration.scountry.value,player_type.values)%>
Here
registration -> HTML form name
But i got the error for
package registration does not exist
out.print(JDBC.saveData(registration.phonenumber.value,id_type.value,id_style.value,registration.email.value,registration.scountry.value,player_type.values));
How to i correct this?
Anyone help me......

How to find Exits in Function Module & BAPI

Hi,
How to find exits in Function Module & BAPI.
Thanks In advance

Hi,
i ve a standard FM IDOC_INPUT_SALESORDER_CREATEFR which creates sales order using BAPI (inbound process).
Now my requirement is to check for some custom segment field if its not initial i ve to change item category field in line item for sales order.
could u pls help me in this.
Thanks in advance.

User exit or functional module for multiple GR of Production order.

Hi All,
I have done a enhancement in CO11N so that batches can get created in production order confirmation.
Now When I go to MIGO to do GR I have option to enter the nulitple batches against the production order.
But what I am looking for is there any exit or functional module which reads the production order and fecth batches which were created from CO11N.
Regards.

Hi,
A few options:
1. User Exit - MBCF0002
2. BADi - MB_MIGO_BADI, MB_DOCUMENT_BADI
3. A Z program by calling BAPI_GOODSMVT_CREATE
Regards,
Vivek

How to run the recursive function in jsp

hi, can any body tell me how to run
rrays.sort(files);
for (int i = 0, n = files.length; i < n; i++) {
for (int indent = 0; indent < indentLevel; indent++) {
System.out.print(" ");
if (files.toString().endsWith(".jsp"))
System.out.println(files[i].toString());
if (files[i].isDirectory()) {
listPath(files[i]);
indentLevel--;
this code in jsp
thanks in advance

Why are you writing scriptlets and functions in JSPs?
Functions are supposed to be written in the Java Application layer.
JSPs are best suited only to display information.
Also why are you using Scriptlets insted of JSTL ?
Anyway, if you want to write in JSPs only , here's how to write a function in them: http://forum.java.sun.com/thread.jspa?threadID=496577&messageID=2341986 you can figure out the rest.

Equivalent function of JSP:include or @include?

Could someone please let me know how I can include html pages in a java servlet page? I am looking for similar function as JSP include. A simple example would be must appreciated. Thanks!

Thanks for you reply. Actually, what I want to do is to import/include a static html page to my java servlet page. I do not want to use JSP because all the pages created were sevlet. I found out a way that using getServletcontext.getResource to read in the html page and print it out from the servlet. Just wondering that if there is a better way to do this?

Same as PHP Functionality In JSP, HOw?

Hi,
I am a developer having experiance in PHP with Oracle, I recently have projects to develop in JSP, I want know does JSP also have the Variable in Variable functioanlity in as it's available in PHP?
In php I stored my variable name in a PHP variable as
$Asif='My Name is Asif';
$a='Asif';
Echo "Here we can get the result of variable Asif using variable a: ".$$a;
in the above by using $$ it understand the inside value is the actual variable name whose value is to print..
I need same functionality in JSP.....
if Any one can help...
THanks in Advance.
Asif

The same rule applies for textboxes as for checkboxes with the same name - indeed for any components accessed in the dom via javascript.
If there is only one element of that name, it is accessed directly.
If there is more than one element of that name, it reveals them as an array.
so document.testForm.a_date would return an array of input fiels
document.testForm.a_date[0], document.testForm.a_date[1] ... document.testForm.a_date[n]
However the order of submission of parameters is NOT guarunteed, which is why people normally DON'T have fields in this manner - because you can't know for certain that a_date[1] matches with b_date[1] at the server end.
The common practice is to give each field a unique name (numbered).

FORM EXITS Vs FUNCTION EXITS

Hi folks
I am a little confused on FORM EXITS& FUNCTION EXITS...can anyone provide me what exactly is the differnce between these two. How we go about using these two in various scenarioes.
Thanks in advance.
Regards
Ram

Hi
There are 4 types of exits
like FUNCTIOn MODULE, MENU,FIELD and SCREEN exits
What is this form exits?
see the doc
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
To find a Exit.
Goto Transaction -- Find The Package
SMOD >f4>Use the Package here to Find the Exits In the Package.
Else if you Want to search by Application Area wise ,
There is one more tab to find the Exits in the Respective Application Area.
Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
Now Run ur Transaction to Check if it Triggers.
Thats it..
Suppose you need to find out all the user exits related to a tcode.
1. Execute the Tcode.
2. Open the SAP program.
3. Get the Development Class.
4. Execute Tcode SE84.
5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
6. Enter the Development class and execute.
Check out this thread..
The specified item was not found.
1. Type the transaction : system->status-> <PROG. NAME>
2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
3. Open CMOD utilities->SAP enhancements
EDIT->All selections
4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
5. The displayed list contains the enhancements names for the transaction You were looking for.
6. Create a project in CMOD and the code in default include->activate.
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
User-Exits
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
These links will help you to learn more on user exits.
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.allsaplinks.com/user_exit.html
www.sap-img.com/abap/what-is-user-exits.htm
Also please check these threads for more details about user exits.
Re: Screen exit
user exit and customer exit
user exit
1. Document on UserExits in FI/CO
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
2. Finding User Exits...
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
3. List of all User Exits...
http://www.planetsap.com/userexit_main_page.htm
How to implement screen exit for a SAP standard transaction HOT
Introduction
SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
An append structure in the database table with the new fields.
A subscreen area into the standard screen where the programmer can attach his subscreen of his own program with the new fields.
A function group under which the new subscreen has to be created with the new fields.
Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
Pre-Requisites
The developer to work on screen exit should have essential knowledge on the following:
DDIC concepts, including the knowledge of append structure.
Concept of SAP Enhancements and implementing them using Projects.
Concept of function exits.
Knowledge on Module Pool including subscreens, Tabstrip controls etc.
Steps
Guidelines
So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
Find out the Required Enhancements
Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton SAP Applications. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest for e.g., Purchasing, Asset Accounting, etc.
Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
Utilize the Enhancement in a Project
After you have found one, do as directed in the documentation. Generally, the steps are as follows:
Create a project using CMOD including your enhancement.
Create the append structure with new fields.
Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
Activate the project.
Test to ensure that required functionality are met.
Case Study 1
Add three new custom fields for Asset master and maintain information for them
Requirement
Three fields in the legacy system have to be maintained in Asset master. These fields are:
Original Asset number 20 characters
Location 2 15 Characters.
Model no 20 characters
Location 2 should start with L.
Pre-Analysis
Finding out the Enhancement
As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
Studying the Function Exits
The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
EXIT_SAPLAIST_002
Function module Level Documentation
This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
Import Parameters
Understanding
This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
EXIT_SAPLAIST_003
Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
Understanding
This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
Studying the Documentation of the Enhancement
The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
Deciding the Final course of Action
After making all the investigations, the final course of action was determined.
SrlNo Step Justification
A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be CUST (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
In the PAI of the subscreen, validation for Location to start with L will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
In the custom include of the function exit module EXIT_SAPLAIST_002, the following code will be written:-
ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
In the custom include of the function exit module EXIT_SAPLAIST_003, the following code will be written:-
E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done otherwise, the new custom subscreen will not be displayed in the Asset master screens.
Development
Creating a Project to include the enhancement
Go to transaction CMOD and create a project.
Enter a description for the project. Then, click on the pushbutton Enhancement Assignments in the Application Toolbar.
Enter the name of the enhancement and Save.
Go to Components.
Creating Custom Include for ANLU
The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
Create the include structure with three new fields, as required. Then, save and activate it.
Develop the subscreen and the program
Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
Create it as subscreen.
Then, go to the Layout of the screen and create three new fields from Database table ANLU.
Drag the fields in the screen body and place them.
Then, save and activate the screen and come back to screen flow editor.
Create the PAI module to add validation for field Location 2, as required .
Activate the whole function group and come out.
Write code in the Function Exits to synchronize the programs
Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
Then, activate everything the whole project and come out.
Complete the configuration to link the subscreen
The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
Here, the requirement is to create these three custom fields in the tab page General of asset master screen ( AS01/AS02/AS03/AS91).
Determine the Layout
To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class 1000 and click on folder General Assignment of Layout.
Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout SAP cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
Create new tab layout
Go to transaction AOLA. Copy the tab layout SAP to create another layout, say, YSUB.
System will copy all the settings and will inform you about that.
Select your newly created layout and double-click on the folder Tab page titles.
You want to put your custom fields in the tab page General. So, select this tab page entry and double-click on the folder "Position of Groups".
Here, all the field groups currently residing in the tab-page General are shown. Add an entry for your newly created fields.
Select the group box from the list. An entry will come with U padded with the custom subscreen prepared by you.
Then, save and come out.
Assign the new Layout to Asset Class
Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
Save and come out.
Test the Exit
Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to themsave. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
Original Source: ittoolbox.com
Reward points for useful Answers
Regards
Anji

Exit a function in JSP

Similar Messages

Maybe you are looking for