EXIT/BADI for enhancing the output of the transaction S_ALR_87013532
Hi,
greetings to all!! I have a problem here guys-I need to find any exit or badi for enhancing the output of the tcode S_ALR_87013532.This tcode is used for seeing the planned/actual/variance of project cost.
In the output we have got 3 columns-total of years, previous years and 2009. Under each column we have Plan, Actual, Variance and VAR %. Our requirement is to show Functional Location(PRPS-TPLNR), Budget Number(TCN01-SWRT0), SBU (TCN01-SWRT1) and Region (TCN01-SWRT2) in each of the clolumns-you can also get the last 3 fields in PRPS table as USR00, USR01 and USR02.
Can anyone help please?could not find anything worthwhile on SDN. Thnx a lot !
Hi,
Check these User-Exits..
Exit name Short text
KAHFEX01 Selection data for commercial reporting in PS
KAP10001 PS: Hierarchy Reports for Projects
KAP60001 PS: Export Project Key Figures into R/3 EIS
Also check the BADI
WBS_USER_FIELDS_F4
Regards
Raghu
Edited by: Raghavendra Rao G on Sep 2, 2009 12:26 PM
Similar Messages
-
User exit/BADI for updating custom table in MB1B transaction-
Dear All,
When performing a material to material conversion in MB1B transaction for batch managed materials,system is creating a new batch by copying the characteristics of issuing material/batch.The details of the new batch created are updated in standard batch tables(MCH1,MCHA,MCHA).
The requirement is when the new batch is created,the batch details and characteristics has to be stamped in a custom table.
Kindly suggest a user exit/BAIi available for updating the same in the custom table.
Regards,
DeepakDeepak, Exits for MB1B are
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read from RESB and RKPF for print list in MB26
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc. -
Hi All,
Can anyone plz tell me if there is any User exit /Badi for CJ20N which triggers at the time of releasing the project or after releasing saving the project.
Thanks
PragyaHi,
Put a breakpoint in the class cl_exithandler in method get_instance.
Check any BADI is triggering at the time of release or save
Regards
Praveen -
User exit/BADI for Deleting the Empty Handling unit
Hi All,
Can anyone give me the suitable User exit/BADI for the below scenario.
While creating the TO (Transfer order) for a delivery using the transaction code LT12, the system will automatically generate HU (Handling unit) number. If the materials are not found in the storage bin for the selected HU, we have to delete the Handling Unit from the delivery document.
Thanks in advance.
Thanks
Ramesh.Find below couple of User Exits for Transfer Order.
MWMTO001 - EXIT_SAPLL03T_001 (Enhancements for end of transfer order generation)
MWMTO002 - EXIT_SAPLL03T_002 (User Exit at End of TO Confirmation (in Update Task))
The Exits gives you access to LTAK and LTAP.....
Hope this is helpful to you.
Vinodh Balakrishnan -
When comparing the EXits BADIs and Enhancement points .
Hi All,
Could you please let me know the upward compatibiltity of the User-exits BADI and Enhancement points?
In case of version upgrade how do these efffect?
Please give me some details......
Thanks in Advance.
Regards
Abhilash.hi Gautham/All,
Thanks for the update.
Can u be more elaborate on this.
In the upgraded versions we can not do for enhancement spots
and BADIs because they will be having upward compatability.
Only user exits and customer exits are not having the upward compatibility. so we have to write the code manually in the new version.
This is as per my understanding.
Please correct me if I am wrong?
Thanks in advance.
Regards
Abhilash. -
User Exit & BADI for controling the END user in co06
Hi
I HAVE SOME 2 DOUBTS
1. I need a user exit / BADI for controlling the user to edit a specific document type in co06 (BACKORDER PROCESSING) .
the control should be actve for specfic order type for specfic users
2 DEPENDS ON ORDER TYPE I NEED TO CONTROL THE ALLOCATION , AND HOW TO CHECK THE SAFETY STOCKAnswer cannot be Provided properly , so has to Post more questions . i am jus closing my ques??
-
Looking for Exit/Badi for VA03 TC for blocking the sales order
Dear Experts,
I would like to know the user exit/badi for sales order(tc VA03)and program name:SAPMV45A
1)if the minimum order quantity is less than the order quantity.the order will block and in the second line item for the same material they are charging 100$ and then they will release. the existing logic is user dont want this now.
2)If a line item is created below the minimum order quantity, the order should get blocked and the user should get a warning message regarding the addition of ZMOQ condition type [u201C Line item Quantity is less than minimum order quantity, ZMOQ condition type is missing u201C
Please provide the exit name and provide some inputs.
Thanks,
V.V.Hi Gurus,
I am trying to find out the exit for warning messages where the SAP has maintained.
whenever the salesorder creating if the order quantity is less than the minimum order quantity it will give two warning messages. 1.Take minimum order quantity 400 DEV into account in item 000010
2.Consider delivery unit 40 DEV in item 000010
so i want to add the third warning message for condition type is missing.
I am trying to find the exit in the program SAPMV45A and include names MV45AFZZ and MV45AFZB.
Please let me know if anyone knows the exit name. where the warning messages maintaining.
Thanks
V.V. -
To get the output in the chart for a single selection
Hi all,
I used a query to get the output of the table, and for the same query i have created a view to get the result in the chart.
to get the output of the table for a particular region i have created an input field and added value help to it. When i selected one particular region, i will be getting the data, in the table. But when i select a particular row in the table i need to get the data of that particular row only in the chart. (which i am getting)
But when i select multiple regions at a time, then i am facing the issue. I get result of multiple regions data(at a time two rows are displayed in the chart) in the chart. where in i want to get data only for one region (only one row needs to get selected at a time) to get the result.
Can any one throw a light of what needs to be done here.
Thanks,
RaniHi Rani,
I am not sure if I understand your question exactly, but it sounds like you need to set the selection mode for your table to "Single". If you do that the user will only have the possibility of selecting one row at a time in the table; they will not be able to select multiple rows.
You make that setting in the Configure Element panel for the table.
I hope this suggestions helps.
Margaret -
Hello, one of our customers just encountered an execution error in a vi running under LabVIEW 6.1, which doesn't exist under LabVIEW 5.1 or 6.01. I have a simple vi that has two encapsulated For Loops. Two string arrays go in, one goes out of the outer loop. Inside the outer loop the first array is indexed. The string which results from this indexing is compared with all other strings from the second string array in the inner loop. If it matches one of the strings of the second array, it is not outputted, otherwise this string goes through the inner For Loop to the output of the inner loop and from there to the output of the outer loop. The count
terminal of the outer/inner loop is connected to the Array Size of the first/second string array. If the second array is empty, that means that the element in test from the first arry cannot match anything from the second array, so the element in test is send to the output of the inner loop and from there to the output of the outer loop. This works fine in LabVIEW 5.1 and 6.01, but NOT in LabVIEW 6.1. In LabVIEW 6.1 the inner loop is never executed if the count value is zero (which is correct), but the data line running through the loop is not executed either, which is different to what LabVIEW 5.1 and 6.01 do. There, the input string is sent to the output of the inner loop correctly even if the loop counter is zero. The solution is easy - I just have to connect the output of the outer loop to the data line BEFORE it enters the inner loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is supposed to be a feature, but it brings some incompatibility in programming between the
different LabVIEW versions.
Best regards,
GabsiHi,
When a for-loop runs zero times, all outputs are 'undefined' (and should
be).
Besides, how would LV know what the output of a not executed routine should
be?
It might be handled differently in LV5 and LV6, which is unfortunate. In
both cases, the result is undefined.
It's not a bug. It's just something that should be avoided in any LV
version.
> The solution is easy - I just have to connect the
> output of the outer loop to the data line BEFORE it enters the inner
> loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is
In some cases this does the trick. But if the data is changed in the inner
loop, this will effect the results if the N is not zero.
Technically, I think the output in this construction is also 'undefined'.
But LV handles this as expected / desired.
Another solution is to use a shift register. If N is zero, the input is
directly passed through to the output.
Regards,
Wiebe.
"Gabs" wrote in message
news:[email protected]...
> LabVIEW 6.1 If For Loop count terminal is zero then value going
> through the loop is not passed on to the output of the loop
>
> Hello, one of our customers just encountered an execution error in a
> vi running under LabVIEW 6.1, which doesn't exist under LabVIEW 5.1 or
> 6.01. I have a simple vi that has two encapsulated For Loops. Two
> string arrays go in, one goes out of the outer loop. Inside the outer
> loop the first array is indexed. The string which results from this
> indexing is compared with all other strings from the second string
> array in the inner loop. If it matches one of the strings of the
> second array, it is not outputted, otherwise this string goes through
> the inner For Loop to the output of the inner loop and from there to
> the output of the outer loop. The count terminal of the outer/inner
> loop is connected to the Array Size of the first/second string array.
> If the second array is empty, that means that the element in test from
> the first arry cannot match anything from the second array, so the
> element in test is send to the output of the inner loop and from there
> to the output of the outer loop. This works fine in LabVIEW 5.1 and
> 6.01, but NOT in LabVIEW 6.1. In LabVIEW 6.1 the inner loop is never
> executed if the count value is zero (which is correct), but the data
> line running through the loop is not executed either, which is
> different to what LabVIEW 5.1 and 6.01 do. There, the input string is
> sent to the output of the inner loop correctly even if the loop
> counter is zero. The solution is easy - I just have to connect the
> output of the outer loop to the data line BEFORE it enters the inner
> loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is
> supposed to be a feature, but it brings some incompatibility in
> programming between the different LabVIEW versions.
> Best regards,
> Gabsi -
Please send material or good lionk on USER-EXIT,BADI and ENHANCEMENT
Hi All,
Please send some step by step material or good lionk on USER-EXIT,BADI and ENHANCEMENT which will be usefull for beginners like me.
Thanks in advance
SrikantaHi Srikanta,
Please see the SDN page for ABAP Enhancements and Modifications:
https://www.sdn.sap.com/irj/sdn/abap?rid=/webcontent/uuid/109f5161-ee76-2910-cb99-db10b559ef4b [original link is broken]
Cheers,
Ville -
Exit/BADi for ml81n to check GRN date should be PO Date.
Exit/BADi for ml81n to check GRN date should be > PO Date.Kindly suggest .
Hi,
You can achieve it using the below enhancement.
Enhancement: SRVEDIT
Function module: EXIT_SAPLMLSR_001
Regards, -
User Exit / Badi for MIRO / MB60
Hi,
I want a user exit or badi for the MIRO /MB60 Transactions.
When select something on GL Account Number(from table control of these transactions) and press on enter then I want to add some code. Can you please let me know the exit/badi for this scenario.
Thanks,
Srinivasa Radahi
Following exits are available for MIRO.
Transaction Code - MIRO Enter Incoming Invoice
Exit Name Description
LMR1M001 User exits in Logistics Invoice Verification
LMR1M002 Account grouping for GR/IR account maintenance
LMR1M003 Number assignment in Logistics Invoice Verification
LMR1M004 Logistics Invoice Verification: item text for follow-on docs
LMR1M005 Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006 Logistics Invoice Verification: Process XML Invoice
MRMH0001 Logistics Invoice Verification: ERS procedure
MRMH0002 Logistics Invoice Verification: EDI inbound
MRMH0003 Logistics Invoice Verification: Revaluation/RAP
MRMN0001 Message output and creation: Logistics Invoice Verification
<b>
BADI...
</b>
To search for a badi, go to se 24 display <b>class cl_exithandler.</b>
double click on method get_instance, get a break point on case statement.
execute and start the required transaction in new session.
look for variable <b>exit_name.</b> It would show the available badi's.
Please do reward if useful
Regards
Dinesh -
Hello Gurus,
My requirement is that I need to change an Invoice Line Item data before the actual posting in Background via Program RMBABG00.
It would be great if somebody could please tell me, is there any USER-EXIT / BADI for doing the above mentioned task.
I will be really helpful as it is very urgent!!!!!
Thanks in advanceHi,
these user exits avialable for Tcode MIRA...
LMR1M001 User exits in Logistics Invoice Verification
LMR1M002 Account grouping for GR/IR account maintenance
LMR1M003 Number assignment in Logistics Invoice Verification
LMR1M004 Logistics Invoice Verification: item text for follow-on docs
LMR1M005 Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006 Logistics Invoice Verification: Process XML Invoice
MRMH0001 Logistics Invoice Verification: ERS procedure
MRMH0002 Logistics Invoice Verification: EDI inbound
MRMH0003 Logistics Invoice Verification: Revaluation/RAP
MRMN0001 Message output and creation: Logistics Invoice Verification
regds,
paras -
Hi all,
I have a requirement to display Requirement. Plan number: (PLAF-PBDNR) in Co01/02/03. Anyone knows user exit / badi for the same ?
Thanks and regards
JijoExit Name Description
CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order header
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
PPCO0009 Enhancement in goods movements for prod. process order
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determination
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
STATTEXT Modification exit for formatting status text lines -
User-Exits/Badis for T.Code Co01 Production Order
Hi Friends,
Please can any one give the User-Exits/ Badis For Co01 , I need to link the Material with Documents....
Thanks,
Ravi...........These are the available user exits..
CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order header
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
PPCO0009 Enhancement in goods movements for prod. process order
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determination
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
STATTEXT Modification exit for formatting status text lines
Maybe you are looking for
-
Hi All, Is there a table which list out all the open hub destination? Saurabh.
-
Hello, I'm trying to deploy an application to a user group with the option checked for "Automatically upgrade any superseded versions of this application" but it never auto installs. - The application is set to install to system whether the user is l
-
Hi I am working on portal SP14. I wan't that the DTN will show only one Open folder (node) at a time. Meaning, when a user presses on a folder (node) in the DTN- This folder (node) will open and other opened Folder (node) will be closed automaticall
-
Changing colors of BEx exceptions?
Is it possible to change the colors of the exceptions within bex for good, critical and bad? I want to make sure the color is printing safe.
-
Security / Privacy Concern
With the clear visibility of the screen on the iPhone, I've found it to be a privacy/security concern that the caller/texter's name appears on the screen, even when I have the phone locked. The feature of a passcode lock already exists, would it be p