Exit/BAdI for removing the component from subcontracting
Hello Friends,
My client has a very unusual requirement. For a subcontracting PO, they wish that only the finished product GR should be posted in MIGO and the 543 movement type which is happening for the component, shouldn't take place at the same time. Right now this is automatically happening.
Is there a BADI or exit where we can control this? It's little urgent. Any small help will be appreciated.
Thanks & Regards,
Shaheen
Hello friends,
I know my question wasn't so straight. But I found a BAdI, where I could make the quantity of the component zero. But in MIGO, when you check the checkbox 'Item_OK', right at the bottom, it selects both the items. That is the finished product and its component. Is there someway that, only Finished product should be selected?
Awaiting a miracle!
Regards,
Shaheen
Similar Messages
-
User Exit & BADI for controling the END user in co06
Hi
I HAVE SOME 2 DOUBTS
1. I need a user exit / BADI for controlling the user to edit a specific document type in co06 (BACKORDER PROCESSING) .
the control should be actve for specfic order type for specfic users
2 DEPENDS ON ORDER TYPE I NEED TO CONTROL THE ALLOCATION , AND HOW TO CHECK THE SAFETY STOCKAnswer cannot be Provided properly , so has to Post more questions . i am jus closing my ques??
-
User exit/BADI for Deleting the Empty Handling unit
Hi All,
Can anyone give me the suitable User exit/BADI for the below scenario.
While creating the TO (Transfer order) for a delivery using the transaction code LT12, the system will automatically generate HU (Handling unit) number. If the materials are not found in the storage bin for the selected HU, we have to delete the Handling Unit from the delivery document.
Thanks in advance.
Thanks
Ramesh.Find below couple of User Exits for Transfer Order.
MWMTO001 - EXIT_SAPLL03T_001 (Enhancements for end of transfer order generation)
MWMTO002 - EXIT_SAPLL03T_002 (User Exit at End of TO Confirmation (in Update Task))
The Exits gives you access to LTAK and LTAP.....
Hope this is helpful to you.
Vinodh Balakrishnan -
Hi I need Event for removal of component from UIEditor
Hi, JDev team
I need a event to identify removal of component from UIEditor.
I have one method of doing this.Apply viewSelectionListener to the UIEditor but i can'nt use this approach for some reasons.Is there any other way out??I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
You may leave comments at Apple Feedback. -
EXIT/BADI for enhancing the output of the transaction S_ALR_87013532
Hi,
greetings to all!! I have a problem here guys-I need to find any exit or badi for enhancing the output of the tcode S_ALR_87013532.This tcode is used for seeing the planned/actual/variance of project cost.
In the output we have got 3 columns-total of years, previous years and 2009. Under each column we have Plan, Actual, Variance and VAR %. Our requirement is to show Functional Location(PRPS-TPLNR), Budget Number(TCN01-SWRT0), SBU (TCN01-SWRT1) and Region (TCN01-SWRT2) in each of the clolumns-you can also get the last 3 fields in PRPS table as USR00, USR01 and USR02.
Can anyone help please?could not find anything worthwhile on SDN. Thnx a lot !Hi,
Check these User-Exits..
Exit name Short text
KAHFEX01 Selection data for commercial reporting in PS
KAP10001 PS: Hierarchy Reports for Projects
KAP60001 PS: Export Project Key Figures into R/3 EIS
Also check the BADI
WBS_USER_FIELDS_F4
Regards
Raghu
Edited by: Raghavendra Rao G on Sep 2, 2009 12:26 PM -
User exit/BADI for changing the exchage rate type in MIGO
Dear guru's,
Please help me in finding the user exit/BADI to change the exchange rate type in MIGO.
Regards,
Abdul Rahimdid you check this one MB_GOODSMOVEMENT?
also exchange rates needs to be changed at Purchase order level and those will be reflected while creating MIGO. -
Exit/bAdI for changing the item level field in VA02.
Dear Guruss...
I am facing a problem while trying toi change the account assignment group in VA02. The field is present at the iteem level in the tab BILLING.
When I change the field by choosing one of the values provided in the search help and enter, the value is again reset to its initial value. However if I change the value and SAVE (without pressing enter) then the value is saved.
The technical field name is VBAP-KTGRM, I have checked in the include:MV45AFZZ by putting break-points at all the forms but unfortunately none of them is getting triggered when I press enter.
During the debugging I found tha the values of the structure VBAP are overwritten by those of XVBAP everytime I press enter.
I also checked for the bAdI but can not get any help.
Is there any bAdI or exit that can help me for this????
Thanks in Advance......
Abhi.....Hi Digvijay
these are some of the enhancements/badi's which is related to t-code va02. just check it out
Transaction Code - VA02 Change Sales Order
Enhancement/ Business Add-in Description
Enhancement
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
V46H0001 SD Customer functions for resource-related billing
V45W0001 SD Service Management: Forward Contract Data to Item
V45S0004 Effectivity type in sales order
V45S0003 MRP-relevance for incomplete configuration
V45S0001 Update sales document from configuration
V45P0001 SD customer function for cross-company code sales
V45L0001 SD component supplier processing (customer enhancements)
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45E0001 Update the purchase order from the sales order
V45A0004 Copy packing proposal
V45A0003 Collector for customer function modulpool MV45A
V45A0002 Predefine sold-to party in sales document
V45A0001 Determine alternative materials for product selection
SDTRM001 Reschedule schedule lines without a new ATP check
SDAPO001 Activating Sourcing Subitem Quantity Propagation
Business Add-in
BADI_SD_SCH_GETWAGFZ Scheduling Agreement: Read WAGFZ from S073
BADI_SD_V46H0001 SD Customer functions for resource-related billing
Regards
Zulfikhar ali
Edited by: Zulfikhar Ali Bhutto.N on Sep 23, 2011 11:15 AM -
In ME21N,User Exit/BADI for Defaulting Vendor number at item level.
Hi Experts.
In ME21N, for every purchase order, we have condtion tab for each line item.
Many condition typesot taxes are listed based on the config for the materials.
My requirements is, When we go inside by selecting a condition type we find vendor number displayed.
I need a user exit/BADI for defaulting the Vendor number.
Regards
Balaji RHi,
check with below link,
fo this one you will find both user exit and badis
https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/find%252bapplication%252bclass%252bwith%252bexits%252band%252bbadis%252bfor%252ba%252btransaction
Regards,
Madhu -
Hello Gurus,
My requirement is that I need to change an Invoice Line Item data before the actual posting in Background via Program RMBABG00.
It would be great if somebody could please tell me, is there any USER-EXIT / BADI for doing the above mentioned task.
I will be really helpful as it is very urgent!!!!!
Thanks in advanceHi,
these user exits avialable for Tcode MIRA...
LMR1M001 User exits in Logistics Invoice Verification
LMR1M002 Account grouping for GR/IR account maintenance
LMR1M003 Number assignment in Logistics Invoice Verification
LMR1M004 Logistics Invoice Verification: item text for follow-on docs
LMR1M005 Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006 Logistics Invoice Verification: Process XML Invoice
MRMH0001 Logistics Invoice Verification: ERS procedure
MRMH0002 Logistics Invoice Verification: EDI inbound
MRMH0003 Logistics Invoice Verification: Revaluation/RAP
MRMN0001 Message output and creation: Logistics Invoice Verification
regds,
paras -
I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?
It's almost impossible. The new iMacs have a Target Display Mode, but it's built to do that. Without ripping your screen out, finding an acceptable power supply, frame, and whatever electronics to convert a Thunderbolt signal to the screen, the cost will be much larger than buying a cheaper HiDef monitor that runs with an HDMI to Thunderbolt cable to your MacBook 15. In fact, you can sell your 17" MBP for a lot of money, unless it's broken or something, buying you a really sweet monitor.
By the way, I found your answer by searching this forum. I would suggest using the search function here in the futuere. -
Since I upgraded to Mavericks from Snow Leopard I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account.
Now I can't use the work email to create the new iTunes account. how do I remove the email from my personal account?You can long into an account via this page and update the email addresses that you have on it : http://appleid.apple.com
-
Is there any user exit/ badi to populate the partner bank type for F-63.
Is there any user exit/ badi to populate the partner bank type (field name BSEG-BVTYP) in transaction F-63. There is exit ZFI_FOAP_CDITEMS_00001011 having BKPF and BSEG as only import parameters so I cant change the value for BSEG-BVTYP.
So could you please let me know any exit where I can change the value for BSEG-BVTYP for transaction F-63?
Thanks in Advance,
Steevanhi,
Below r the user exit related to transaction F-63.
Check out if any of them will solve ur Query..
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
FEDI0001 Function Exits for EDI in FI
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment)
Reward points if helpful,
Regards,
Brijesh -
Hello everyone!i got a problem about this used ipad2 that i had bought from a friend of my friend.the problem is i cannot activate it i asked my friend to contact the previous owner..according to my friend the previous owner had already removed the device from his account..but still it keeps on asking me to enter the email and password..what should i do now?maybe the previous owner didn't want to give me his Email add ppassword for his own personal reason..please help me this ipad has been in here since April 2014..thank you
The person who sold you the device can remove the ID without giving it to you. Follow the steos in "What to do if you no longer have the device." In the artcle below. If you can't find the person or they won't do it you're stuck with a unusable device.
What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support -
I have 3 songs waiting to download for 3 days. I am unable to swipe to delete and I have rebulit my itunes libary which did not remove the songs from my phone. What do I need to do to get rid of these songs?
Hi RadarCat16,
Welcome to the Apple Support Communities!
I know it can be frustrating when you are waiting for content to download to your iPhone from the iTunes Store. There are a few steps I would recommend in this situation. Please read over and follow the steps in the attached article.
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/HT1725
If your download was interrupted using your iPhone, iPad, or iPod touch
From the Home screen, tap the iTunes app.
For iPhone or iPod touch, tap More > Downloads. For iPad, tap Downloads.
Enter your account name and password if prompted.
Tap the blue download arrow to resume.
If you can't complete the download on your iOS device, you can download it in iTunes on your Mac or PC and then sync it to your iOS device. You can also transfer purchases from your iPhone, iPad, or iPod to a computer.
Have a great day,
Joe -
User exit or a badi for checking the vendor email id in me22n on me29n
hi all,
can anybody suggest me a user exit or a badi for checking the email id of the vendor in me21n or me22n or me29n.
i.e. a user exit or a BADI which gets hit either at the time of creation or release of a purchase order.
plz suggest me a solution its urgent.
regards,
santoshHi Santosh,
Have you looked BADI <b>ME_PROCESS_PO_CUST</b> or user exits <b>EXIT_SAPMM06E_016</b> / <b>EXIT_SAPMM06E_017</b>?
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.
Maybe you are looking for
-
Error message when opening Playmemories Home
When I open Playmemories Home, v.3.1.10.042111, I get the error message PMBBrowser.exe = Application Error The exception unknown software exception (Oxc0000417) occurred in the application at 0x78b2af3e This has happened previously. This time I can'
-
I am looking to add SQL Express 2012 as a pre-requisite using WIX
Hi, I need working sql bootstrapping configuration that also setup password for SA Account. Please help me with the solution. Thanks, Naga Sreenivas Gupta V Naga Sreenivas, Software Engineer, SourceEdge Software Technologies.
-
Hi ALL, I used to employ BusinessDelegate pattern in ejb 2.0. My design was SFD ( session facade deligator) ---- SFIMPL - DAO. I am wondering whether it is still being used with ejb3.0. Besides providing abstraction layer to the session facade some o
-
Over the last couple of days when sending video's some recipients haven't been able to open them. It is saying that the file is unsupported. These phones mostly other Nokia's and an LG have been able to open them before. I have tried resetting factor
-
Deciphering system.log to diagnose a network problem
ok here goes, about a week ago my old d-link router (DI-624+) just died, wouldn't turn on or anything, so off i went to get a new one, got a new d-link since other than dying (after like 3 years i should add) it had been pretty reliable. set it up an