Exit/Badi mesagem nota fiscal J_1BNFFTX
boa tarde,
Preciso saber si hà alguma Exit/Badi para gravar mesagems na tabela J_1BNFFTX quando se cria a nota fiscal pela MIRO, VF01, etc..
Estamos a procurar mas não encontro.
Me ajuda por favor.
Obrigado.
Oi Alicia,
Não tem BAdI's ou exits na solução standard que permitiriam fazer essa alteração.
Por exemplo, na criação da NF via fatura de SD as exits de SD estão antes da geração da NF então não seria possível popular a informação que posteriormente seria persistida na tabela J_1BNFFTX.
Acredito que isso seria possível criando um enhancement implícito dentro de funções da localização. Não é o jeito mais recomendado, porém é possível.
att,
Renan Correa
Similar Messages
-
User exit / BADI /OSS notes for VL02/VL03 TCODES
Hello ,
Can anybody please proide the inforamtion
if there is any user exit or BADI or OSS notes available to enhance VL01 / VL02 / VL03 tcodes
regardsHi
Enhancement
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
V53W0001 User exits for creating picking waves
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53C0001 Rough workload calculation in time per item
V50S0001 User Exits for Delivery Processing
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50R0002 Collective processing for delivery creation
V50R0001 Collective processing for delivery creation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50PSTAT Delivery: Item Status Calculation
V02V0004 User Exit for Staging Area Determination (Item)
V02V0003 User exit for gate + matl staging area determination (headr)
V02V0002 User exit for storage location determination
V02V0001 Sales area determination for stock transport order
Business Add-in
DELIVERY_ADDR_SAP Address Change in Delivery Processing
DELIVERY_PUBLISH Announcement of delivery data during database update
regards
Pavan -
USER EXIT/ BADI (The price should not be changed in the billing document)
Hi all,
We have given manual entry provision for pricing in Sales order level. But as per the company requirement, the price should not be changed in the billing document. Also the point to be considered is, it is a delivery based billing.
Kindly help me for finding USER EXIT/ BADI to achieve my requirement.
Thanks.Hi,
Please refer to OSS notes:
105621 - Authorization check for the condition screen - you can use following user-exit includes for changing the condition tab to display only:
USEREXIT_FIELD_MODIFICATION
USEREXIT_PRICING_CHECK
USEREXIT_FIELD_MODIFIC_LEER
USEREXIT_FIELD_MODIFIC_KZWI
USEREXIT_FIELD_MODIFIC_KOPF
1165078 - Authorization check for conditions or subtotals - from ECC6.0 EHP4 there is a dedicated BAdI for authorization check, however if the user is not aurhorized to change the conditions, the conditions are not visible for the user as well.
Regards,
Marcin -
Order type, Invoice type and Item categories for Nota Fiscal Brazil
Hi eveyone,
we have a company in Brazil implemented in SAP using a different SD Order type, Invoice Type and Item categories
as our mother company in Switzerland. Reason of that is because of the nota fiscal customization for Brazilian legal requirements.
We startet with a Project worldwide to rollout a global template within sales and distribution and are facing now exactly
the problem with those different order type, item categories and Invoice type.
Our local SAP partner in Brazil told as based on best practise we should have different types.
I checked the customization and it seems I can't use e.g.: the same Order type for Brazil and Switzerland because
the activation flag for nota fiscal is linked to the order type and no sales organization can be setted to slplitt the different processes.
Someone knows if there are some possibilities (maybe trough user exits or badi's) to use globally the same dovument types, item categoreis... globally?
Thanks in advance
Gaspare GuttadauroHi Gaspare Guttadauro,
I would strongly recommend to use the different document types and item categories as suggested by SAP. Since Brazil do have one of the complex taxation process in place hence to determine correct pricing the different document type will be required. Also functionalities like CFOP determination and nota fiscal relevance can be maintained.
Please feel free to revert the forum in case of any doubts.
Cheers
Atul -
Ehnacement for MB1B : Create Nota Fiscal
Hi experts,
I have a requirement that in tcode MB1B i need to add total quantity for the particular material irrispective of their Batch in Nota Fiscal Document
So that in Nota Fiscal it will show only one entry fo ra single Material number.
Is their any BADI defi which allows me to modify the wk_item internal table.
what should i do? What are all the exits availble to that and how to do that?
its an urgent...
points will be rewarded
Regards,
Prashant BondeHi,
Check thease BADI'S
MB_DOCUMENT_UPDATE
MB_DOCUMENT_BADI
Regards
Kiran Sure -
Reg. Exit/BADI for changing item data of PO in ME22N
Hi all,
My requirement is to update the field LABNR (Order Ack.) of few specific line items of a PO, in the Transaction ME22N, using Exit/BADI.
I have tried the BADI ME_PROCESS_PO_CUST. But the PROCESS_ITEM method of this BADI processes only the line item which has been changed/inserted in ME22N transaction. But my requirement is to update line items irrespective of whether that line item was "changed/not changed" during the process in ME22N screen.
Could you please suggest me some suitable Exit/BADI for this requirement.
Regards,
Anbarasan KThanks Martin.
Problem solved by implementing the method Process_Header.
1. Get the items from Header - im_header->get_items
2. Loop the item list and get the line item record - re_item-item->get_data
3. <- Logic to Update the line item - >.
4. Update the line item - re_item-item->set_data
Thank you very much.. Martin.
Regards,
Anbarasan K -
User exit/ badi needed for planned order create/change,collective ATP check
Dear All,
I'm looking for a user exit/ badi which can be used for planned orders at the stage of
mass collective availability check (COMAC tcode) update; or at some other relevant stages of mass update of planned orders.
I need after collective availability check to perform the following:
1) to copy date from "total comitment" field on header tab of planned order and paste it (replace old date) to order finish date on header screen
then
2) to start a scheduling.
Very appreciate your help.
Best Regards,
Andrey
Edited by: Andrey Kruglov on Apr 15, 2010 3:06 PM
Edited by: Andrey Kruglov on Apr 15, 2010 3:07 PMDear,
Use the BAPI : BAPI_PLANNEDORDER_CHANGE
Or use the function module MD_SET_ACTION_PLAF for Schedule planned order.
and the transaction MDAC Execute action for planned order
This function module includes the following actions:
Explode BOM
Explode BOM, check availability
Check availability, only explode BOM in the case of a requirement
Check availability, do not explode BOM
Reset availability
Change planned order data
Schedule planned order
Delete planned order
Assign the key for the respective action control to the materials in the material master (MRP 4 view).
Please refer this thread,
Re: MDVP for collective orders
Regards,
R.Brahmankar -
Nota Fiscal de Retorno - Cliente
No processo de retorno, o cliente emite uma nota para retorno de uma saída(remessa), essa nota pode ser uma NFe ou NF convencional, alguém já utilizou algum recurso para determinar se a nota fiscal de entrada é Eletrônica ou convenvional para este processo de recebimento?
Pelo que andei pesquisando existe a possibilidade de colocar a letra 'E' antes do númeor de referência(XBLNR) para poder determinar a categoria de NF, porém não está dando certo aparecendo a mensagem de erro "Nº NF externo/série está incorreto 000000123".
Pergunta 1 - devo ter duas categorias para recebimento, uma eletrônica e uma convencional ?
Pergunta 2 - Como devo proceder para determinar as respectivas categorias de entrada ?
a BADI --> CL_SD_NFTYPE é um caminho ?
Grato,
ManoelEstimado,
Em um processo de retorno, via MIRO, o campo reference não deve ser preenchido. O lugar certo para colocar a referencia é o "Header Text", na mesma aba que você coloca a nota fiscal type.
Agora, você pode configurar um popup, no qual o usuario decide que tipo de nota fiscal utilizat, tente esta sequencia de customizações/views:
NF Type - movimentos
J_1BNFTYPEREDLFV
J_1BNFTYPEREDMMV
J_1BIM02V
Deve funcionar. Espero ter ajudado.
Abraços
Seu amigo da vizinhança, Gustavo ... -
Transferência de Exceção de PIS e COFINS na Nota Fiscal Eletrônica
Pessoal,
Quando tenho situações de exceção dinâmica para PIS e COFINS estes impostos não são transferidos para Nota Fiscal Eletrônica(J1B3N) e nem para o arquivo XML. As informações existem no documento de faturamento
Gostaria de saber se alguem passou por esta situação e como foi resolvido.
Este problema ocorre somente quando tem exceções dinâmiicas. Se não tiver exceção os impostos IPI3 e ICN3 são transferidos para Nota.
Preciso transferir as informãções de PIS e COFINS para o XML e não queria utilizar a BADI.
Alguem poderia me ajudar.Bom dia Lucas
Vc deve estar se referindo ao fato de com a nota fiscal eletronica é necessario existir as linha do PIS e COFINS na nota fiscal mesmo que estes impostos não sejam incidentes, pois caso contrario vc teraá erros de validação no GRC.
Por favor qual a versão do seu ERP eu vou ver qual foi a nota que resolve isso?
Obrigado
Nilson -
To find out appropriate user exit/ badi for transaction VT01n
Hi,
I have the following requirement.
Cass shipment type (VTTK-ADD03) field needs to be required and should be automatically populated upon creation of the shipment document. The rules for populating the value (SO, ST, PO and RA) are as follows:
If any of the orders on the shipment are customer order types, then the CASS shipment type should be a SO,
If all of the orders are STO orders, then the Cass shipment type should be "ST",
If all of the orders are PO orders, then the Cass shipment type should be "PO" , and
If all of the orders are customer return orders, then the Cass shipment type should be "RA".
I have to find out proper user exit / badi to do this.I have tried with many userexit but it won't work.
Thanking in advance to give your suggestion in order to resolve it.
With regards,
Ajit.Hi this code will enable you to find the user exit for any transaction . Just give the transaction as input
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
*---End of Program
Just for your information the User exits available for VT01n are
MV56AINI Initialization of transaction control for transportation
V56AFCCH Shipment processing: Check function code allowed
V56AGTAR User Exit for Filtering Shipping Unit Calculation
V56ARCHV Customer-spec. checks for archiving shipments
V56ATKTX Change the number of lines for text input in shipment
V56BMOD Transportation processing: Field modification
V56DISTZ Shipment Processing: Determine Distance
V56FCOPY Shipment processing: Copy delivery data
V56FSTAT Shipment processing: Activities when setting a status
V56L0001 Status of Shipments for a Delivery
V56LDELI Read Delivery Data for Shipment Processing
V56LOCID Shipment Processing: Determine Location Identification
V56MVT04 Extensions for Collective Processing of Shipments
V56SLDET Shipment processing: Leg determination
V56TDLIF Filter Delivery Items for Shipment
V56UCHCH Shipment processing: Check whether changes were made
V56UCHCO Check shipments are complete
V56UDLUP Obsolete as of 4.6C: Delivery Update on Delivery Routines
V56UNUMB Shipment number allocation
V56USTAT User-individual definition of transportation planning status
V56USVDO Update new objects for transport
V56USVDP Preparation for updating new objects for transport?
Award points if helpful..
Thanks -
Exit/Badi in the transaction of production order create or change (CO02)
hi all,
I need an exit/Badi in the transaction of production order create or change (preferably during SAVE).
I want to change structure AFVGD-usr02,AFVGD-usr03 .
<b>PPCO0007 Exit when saving production order</b>
the exit is not applicable EXIT_SAPLCOZV_001 .Hi
we around 200 exit for this tcode i found only three badi for this tcode.
AFABD_CHANGE Change Relationship
CAUFVD_CHANGE BAdI: Overall Network Scheduling with Selection Option
SIDAT_UPDATE Change date of price simulation.
check with this goto se18 and F4 thn give the Package as CO.enter u get this three.
reward pointd if use full -
*Exit/BAdI for Invoice Verification*
Hi Experts,
I'm looking for some exits/BAdi in the transaction MIRO. I've a list of relevant enhancement/BAdI but not sure which one will l serve my purpose specifically. So I request, please let me now the specific one which will meet my requirement as follows...
Requirement: I need to alter the net payable amount, based on some PO condition, and the changed amount will be posted in some other GL. Like as we do manually by giving some GL A/c (in the MIRO item level screen GL tab) with Credit indicator (H). This function has to done automatically by some Enhancement/BAdI. The triggering should happen during MIRO after entering the PO number.
Illustration:
In MIRO while posting with PO ref. net payable amount is derived as Rs. 100.
I'd like to pay only Rs.60 to the invoicing party. Balance Rs. 40 will be posted to some XXXX GL A/c.
*Discount in PO is not a option for me. I've to do as it is coming from PO...can not alter the PO.
Please guide me if something possible is there.
Thanks, PratapHi ,
Is it GR based IR ? --->means first u will do MIGO then MIRO , in this case MIRO will copy QTY data from MIGO not from PO.
If not , then It will copy those QTY data from PO itself , no need of any user exits , its config.
regards
prabhu -
EXIT/BADI for ME31L and ME31K for changing Incoterms in header and item
Hi All,
I am facing an issue in ME31L,ME32L transactions.
In vendor master , incoterm is maintained .So whenever a PO is created with particular vendor, the same incoterm(EKKO-INCO1& EKKO-INCO2) will get defaulted into PO as well. Now i need to change the incoterms2 on basis of some logic, but i was not able to find the correct BADI/EXIT to do these changes.
This relation can be seen in vendor master partner profile.
SO if I create a PO/SA with a vendor and goods supplier is different the incoterm from vendor is getting defaulted there, not from goods supplier .
So am looking for any EXIT/BADI which will enable changing of Incoterms2 based on the incoterms1 value.
Thanking you in advance.
satheeshHI Sharma,
Thank you for your response.
This particular BADI ME_PURCHDOC_POSTED is getting triggered when i am creating a SA in ME31L but when I am changing the values in the BADI that is not getting updated on the screen.
thanks,
satheesh -
To find out user exit/ badi for the VT01n transaction triggered in Save
Hi Friends,
I have the following requirement and for this appropriate user exit/ badi should be needed which will trigger during saving of the shipment.
Cass shipment type (VTTK-ADD03) field needs to be required and should be automatically populated upon creation of the shipment document. The rules for populating the value (SO, ST, PO and RA) are as follows:
If any of the orders on the shipment are customer order types, then the CASS shipment type should be a SO,
If all of the orders are STO orders, then the Cass shipment type should be "ST",
If all of the orders are PO orders, then the Cass shipment type should be "PO" , and
If all of the orders are customer return orders, then the Cass shipment type should be "RA".
I have tried with the 3 badi available and 7 to 8 user exit, but it won't work.
Thanking a lot in advance for giving the solution.
With Regards,
Ajit.Hi,
This code will give you all the user-exits.
Code:
& Report ZPJA_PM002 (Ver4) &
& PJA Consultancy Services (www.pjas.com) &
& This report attmpts to find Enhancements, Program-Exits, BADIs &
& and Business Transaction Events in a particular program/tcode. &
& Other search options: &
& Program: RPR_ABAP_SOURCE_SCAN &
& FModule: &
& Text Elements: &
& P_DEVC Show user-exits from development class &
& P_LIMIT Limit submit program selection &
& P_FUNC Show function modules &
& P_SUBM Show submit programs &
& S01 Selection data (TCode takes precedence over program name) &
report zpja_pm002
no standard page heading
line-size 221.
data: tabix like sy-tabix,
w_linnum type i,
w_off type i,
w_index like sy-tabix,
w_include like trdir-name,
w_prog like trdir-name,
w_incl like trdir-name,
w_area like rs38l-area,
w_level,
w_fsel like sy-ucomm, " Determination of screen field
w_str(50) type c,
w_funcname like tfdir-funcname.
constants: c_fmod(40) type c value 'Function modules selected: ',
c_subm(40) type c value 'Submit programs selected: ',
c_col1(12) type c value 'Enhanmt Type',
c_col2(40) type c value 'Enhancement',
c_col3(30) type c value 'Program/Include',
c_col4(20) type c value 'Enhancement Name',
c_col5(40) type c value 'Enhancement Description',
c_col6(8) type c value 'Project',
c_col7(1) type c value 'S',
c_col8(12) type c value 'ChangeName',
c_col9(10) type c value 'ChangeDate'.
Work Areas: ABAP Workbench
data: begin of wa_d010inc.
data: master type d010inc-master.
data: end of wa_d010inc.
data: begin of wa_tfdir.
data: funcname type tfdir-funcname,
pname type tfdir-pname,
include type tfdir-include.
data: end of wa_tfdir.
data: begin of wa_tadir.
data: devclass type tadir-devclass.
data: end of wa_tadir.
data: begin of wa_tstc.
data: pgmna type tstc-pgmna.
data: end of wa_tstc.
data: begin of wa_tstcp.
data: param type tstcp-param.
data: end of wa_tstcp.
data: begin of wa_enlfdir.
data: area type enlfdir-area.
data: end of wa_enlfdir.
Work Areas: BADIs
data: begin of wa_sxs_attr.
data: exit_name type sxs_attr-exit_name.
data: end of wa_sxs_attr.
data: begin of wa_sxs_attrt.
data: text type sxs_attrt-text.
data: end of wa_sxs_attrt.
Work Areas: Enhancements
data: begin of wa_modsap.
data: member type modsap-member.
data: end of wa_modsap.
data: begin of wa_modsapa.
data: name type modsapa-name.
data: end of wa_modsapa.
data: begin of wa_modsapt.
data: modtext type modsapt-modtext.
data: end of wa_modsapt.
Work Areas: Business Transaction Events
data: begin of wa_tbe01t.
data: text1 type tbe01t-text1.
data: end of wa_tbe01t.
data: begin of wa_tps01t.
data: text1 type tps01t-text1.
data: end of wa_tps01t.
user-exits
types: begin of ty_mod,
member like modact-member,
name like modact-name,
status like modattr-status,
anam like modattr-anam,
adat like modattr-adat,
end of ty_mod.
data: w_mod type ty_mod.
types: begin of t_userexit,
type(12) type c,
pname like trdir-name,
txt(300),
level type c,
modname(30) type c,
modtext(60) type c,
modattr type ty_mod,
end of t_userexit.
data: i_userexit type standard table of t_userexit with header line.
Function module developmnet classes
types: begin of t_devclass,
clas like trdir-clas,
end of t_devclass.
data: i_devclass type standard table of t_devclass with header line.
types: begin of t_enlfdir,
area type enlfdir-area,
end of t_enlfdir.
data: i_enlfdir type standard table of t_enlfdir with header line.
Submit programs
types: begin of t_submit,
pname like trdir-name,
level,
done,
end of t_submit.
data: i_submit type standard table of t_submit with header line.
Source code
types: begin of t_sourcetab, "#EC * (SLIN lügt!)
line(200), "#EC * (SLIN lügt!)
end of t_sourcetab. "#EC * (SLIN lügt!)
data: sourcetab type standard table of t_sourcetab with header line.
data c_overflow(30000) type c.
Description of an ABAP/4 source analysis token
data: i_stoken type standard table of stokex with header line.
data wa_stoken like i_stoken.
Description of an ABAP/4 source analysis statement
data: i_sstmnt type standard table of sstmnt with header line."#EC NEEDED
keywords for searching ABAP code
types: begin of t_keywords,
word(30),
end of t_keywords.
data: keywords type standard table of t_keywords with header line.
function modules within program
types: begin of t_fmodule,
name like rs38l-name,
pname like trdir-name,
pname2 like trdir-name,
level,
bapi,
done,
end of t_fmodule.
data: i_fmodule type standard table of t_fmodule with header line.
& Selection Options &
selection-screen begin of block selscr1 with frame title text-s01.
parameter: p_pname like trdir-name memory id rid,
p_tcode like syst-tcode,
p_limit(4) type n default 100,
p_devc like rihea-dy_ofn default ' ',
p_func like rihea-dy_ofn default ' ',
p_subm like rihea-dy_ofn default ' '.
selection-screen end of block selscr1.
& START-OF-SELECTION &
start-of-selection.
if p_pname is initial and p_tcode is initial.
message e008(hrfpm). "Make entry on the selection screen
stop.
endif.
ensure P_LIMIT is not zero.
if p_limit = 0.
p_limit = 1.
endif.
perform data_select.
perform get_submit_data.
perform get_fm_data.
perform get_additional_data.
perform data_display.
& Form DATA_SELECT &
form data_select.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get programs/includes' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
determine search words
keywords-word = 'CALL'.
append keywords.
keywords-word = 'FORM'.
append keywords.
keywords-word = 'PERFORM'.
append keywords.
keywords-word = 'SUBMIT'.
append keywords.
keywords-word = 'INCLUDE'.
append keywords.
if not p_tcode is initial.
get program name from TCode
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
if not wa_tstc-pgmna is initial.
p_pname = wa_tstc-pgmna.
TCode does not include program name, but does have refereve TCode
else.
select single param from tstcp into wa_tstcp-param
where tcode eq p_tcode.
if sy-subrc = 0.
check wa_tstcp-param(1) = '/'.
check wa_tstcp-param+1(1) = '*'.
if wa_tstcp-param ca ' '.
endif.
w_off = sy-fdpos + 1.
subtract 2 from sy-fdpos.
if sy-fdpos gt 0.
p_tcode = wa_tstcp-param+2(sy-fdpos).
endif.
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
p_pname = wa_tstc-pgmna.
if sy-subrc <> 0.
message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
endif.
else.
message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
endif.
endif.
endif.
Call customer-function aus Program coding
read report p_pname into sourcetab.
if sy-subrc > 0.
message e017(enhancement) with p_pname raising no_program."#EC *
endif.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
overflow into c_overflow
with includes.
if sy-subrc > 0. "keine/syntakt. falsche Ablauflog./Fehler im Skanner
message e130(enhancement) raising syntax_error. "#EC *
endif.
check I_STOKEN for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '0'.
w_prog = ''.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endform. "DATA_SELECT
& Form GET_FM_DATA &
form get_fm_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get function module data' "#EC NOTEXT
exceptions
system_failure
communication_failure. "#EC *
Function module data
sort i_fmodule by name.
delete adjacent duplicates from i_fmodule comparing name.
loop at i_fmodule where done ne 'X'.
clear: i_stoken, i_sstmnt, sourcetab, wa_tfdir, w_include .
refresh: i_stoken, i_sstmnt, sourcetab.
store function groups
select single area from enlfdir into wa_enlfdir-area
where funcname = i_fmodule-name.
i_enlfdir-area = wa_enlfdir-area.
append i_enlfdir.
Store development classes
if not wa_enlfdir-area is initial.
select single devclass into wa_tadir-devclass
from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = wa_enlfdir-area.
check not wa_tadir-devclass is initial.
move wa_tadir-devclass to i_devclass-clas.
append i_devclass.
endif.
clear wa_tfdir.
select single funcname pname include from tfdir into wa_tfdir
where funcname = i_fmodule-name.
check sy-subrc = 0.
call function 'FUNCTION_INCLUDE_SPLIT'
exporting
program = wa_tfdir-pname
importing
group = w_area.
concatenate 'L' w_area 'U' wa_tfdir-include into w_include.
i_fmodule-pname = w_include.
i_fmodule-pname2 = wa_tfdir-pname.
modify i_fmodule.
read report i_fmodule-pname into sourcetab.
if sy-subrc = 0.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
message e130(enhancement) raising syntax_error.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '1'.
w_prog = i_fmodule-pname2.
w_incl = i_fmodule-pname.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
endloop.
sort funtion groups
sort i_devclass.
delete adjacent duplicates from i_devclass.
sort i_enlfdir.
delete adjacent duplicates from i_enlfdir.
endform. "GET_FM_DATA
& Form GET_SUBMIT_DATA &
form get_submit_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get submit data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
w_level = '0'.
loop at i_submit where done ne 'X'.
check i_submit-pname ne p_pname. " ensure not the same as origianl program
clear: i_stoken, i_sstmnt, sourcetab.
refresh: i_stoken, i_sstmnt, sourcetab.
read report i_submit-pname into sourcetab.
if sy-subrc <> 0.
delete i_submit.
continue.
else.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
continue.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_prog = i_submit-pname.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
restrict number of submit program selected for processing
describe table i_submit lines w_linnum.
if w_linnum ge p_limit.
w_level = '1'.
endif.
i_submit-done = 'X'.
modify i_submit.
endloop.
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
endform. "GET_SUBMIT_DATA
& Form DATA_SEARCH &
form data_search tables p_stoken structure stoken
using p_level p_prog p_incl.
loop at p_stoken.
clear i_userexit.
tabix = sy-tabix + 1.
i_userexit-level = p_level.
if i_userexit-level = '0'.
if p_incl is initial.
i_userexit-pname = p_pname.
else.
concatenate p_pname '/' p_incl into i_userexit-pname.
endif.
else.
if p_incl is initial.
i_userexit-pname = p_prog.
else.
concatenate p_prog '/' p_incl into i_userexit-pname.
endif.
endif.
Include
if p_stoken-str eq 'INCLUDE'.
check p_level eq '0'. " do not perform for function modules (2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs 'STRUCTURE'.
check not wa_stoken-str cs 'SYMBOL'.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Enhancements
if p_stoken-str eq 'CUSTOMER-FUNCTION'.
clear w_funcname.
read table p_stoken index tabix.
translate p_stoken-str using ''' '.
condense p_stoken-str.
if p_prog is initial.
concatenate 'EXIT' p_pname p_stoken-str into w_funcname
separated by '_'.
else.
concatenate 'EXIT' p_prog p_stoken-str into w_funcname
separated by '_'.
endif.
select single member from modsap into wa_modsap-member
where member = w_funcname.
if sy-subrc = 0. " check for valid enhancement
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
append i_userexit.
else.
clear wa_d010inc.
select single master into wa_d010inc-master
from d010inc
where include = p_prog.
concatenate 'EXIT' wa_d010inc-master p_stoken-str into w_funcname
separated by '_'.
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
endif.
endif.
BADIs
if p_stoken-str cs 'cl_exithandler='.
w_index = sy-tabix + 4.
read table p_stoken index w_index into wa_stoken.
i_userexit-txt = wa_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-type = 'BADI'.
append i_userexit.
endif.
Business transaction events
if p_stoken-str cs 'OPEN_FI_PERFORM'.
i_userexit-type = 'BusTrEvent'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-modname = i_userexit-txt+16(8).
case i_userexit-txt+25(1).
when 'E'.
clear wa_tbe01t.
select single text1 into wa_tbe01t-text1 from tbe01t
where event = i_userexit-txt+16(8)
and spras = sy-langu.
if wa_tbe01t-text1 is initial.
i_userexit-modtext = ''. "#EC NOTEXT
else.
i_userexit-modtext = wa_tbe01t-text1.
endif.
i_userexit-modname+8 = '/P&S'. "#EC NOTEXT
when 'P'.
clear wa_tps01t.
select single text1 into wa_tps01t-text1 from tps01t
where procs = i_userexit-txt+16(8)
and spras = sy-langu.
i_userexit-modtext = wa_tps01t-text1.
i_userexit-modname+8 = '/Process'.
endcase.
append i_userexit.
endif.
Program exits
if p_stoken-str cs 'USEREXIT_'.
i_userexit-type = 'Program Exit'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
append i_userexit.
endif.
Submit programs
if p_stoken-str cs 'SUBMIT'.
check p_level eq '0'. " do not perform for function modules (2nd pass)
check not p_stoken-str cs '_'. " ensure not SUBMIT_XXX
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs '_'. " ensure not SUBMIT_XXX
replace all occurrences of '''' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Perform routines (which reference external programs)
if p_stoken-str cs 'PERFORM'.
check p_level eq '0'. " do not perform for function modules (2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if not wa_stoken-ovfl is initial.
w_off = wa_stoken-off1 + 10.
w_str = c_overflow+w_off(30).
find ')' in w_str match offset w_off.
w_off = w_off + 1.
wa_stoken-str = w_str(w_off).
endif.
check wa_stoken-str cs '('.
w_off = 0.
while sy-subrc = 0.
if wa_stoken-str+w_off(1) eq '('.
replace section offset w_off length 1 of wa_stoken-str with ''.
replace all occurrences of ')' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
append i_submit.
endif.
exit.
else.
replace section offset w_off length 1 of wa_stoken-str with ''.
shift wa_stoken-str left deleting leading space.
endif.
endwhile.
endif.
Function modules
if p_stoken-str cs 'FUNCTION'.
clear i_fmodule.
check p_level eq '0'. " do not perform for function modules (2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if wa_stoken-str cs 'WF_'.
if wa_stoken-str cs 'IDOC'.
break-point.
endif.
if wa_stoken-str cs 'BAPI'.
i_fmodule-bapi = 'X'.
endif.
replace first occurrence of '''' in wa_stoken-str with space.
replace first occurrence of '''' in wa_stoken-str with space.
if sy-subrc = 4. " didn't find 2nd quote (ie name truncated)
clear wa_tfdir.
concatenate wa_stoken-str '%' into wa_stoken-str.
select single funcname into wa_tfdir-funcname from tfdir
where funcname like wa_stoken-str.
if sy-subrc = 0.
i_fmodule-name = wa_tfdir-funcname.
else.
continue.
endif.
else.
i_fmodule-name = wa_stoken-str.
endif.
read table i_fmodule with key name = i_fmodule-name.
if sy-subrc <> 0.
i_fmodule-level = p_level.
append i_fmodule.
endif.
endif.
endloop.
endform. "DATA_SEARCH
& Form GET_ADDITIONAL_DATA &
form get_additional_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get additional data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
loop at i_userexit.
Enhancement data
if i_userexit-type cs 'Enh'.
clear: wa_modsapa.
select single name into wa_modsapa-name from modsap
where member = i_userexit-txt.
check sy-subrc = 0.
i_userexit-modname = wa_modsapa-name.
clear wa_modsapt.
select single modtext into wa_modsapt-modtext from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
i_userexit-modtext = wa_modsapt-modtext.
MOH - enhancement to get the project name
clear w_mod.
select single modactmember modactname modattr~status
modattranam modattradat
into w_mod
from modact
inner join modattr
on modattrname = modactname
where modact~member = wa_modsapa-name
and modact~typ = space.
i_userexit-modattr = w_mod.
MOH - eoe
endif.
BADI data
if i_userexit-type eq 'BADI'.
clear wa_sxs_attr.
select single exit_name into wa_sxs_attr-exit_name from sxs_attr
where exit_name = i_userexit-txt.
if sy-subrc = 0.
i_userexit-modname = i_userexit-txt.
else.
i_userexit-modname = 'Dynamic call'. "#EC NOTEXT
endif.
clear wa_sxs_attrt.
select single text into wa_sxs_attrt-text from sxs_attrt
where exit_name = wa_sxs_attr-exit_name
and sprsl = sy-langu.
i_userexit-modtext = wa_sxs_attrt-text.
endif.
modify i_userexit.
endloop.
get enhancements via program package
clear wa_tadir.
select single devclass into wa_tadir-devclass from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = p_pname.
if sy-subrc = 0.
clear: wa_modsapa, wa_modsapt.
select name from modsapa into wa_modsapa-name
where devclass = wa_tadir-devclass.
select single modtext from modsapt into wa_modsapt-modtext
where name = wa_modsapa-name
and sprsl = sy-langu.
read table i_userexit with key modname = wa_modsapa-name.
if sy-subrc <> 0.
i_userexit-modtext = wa_modsapt-modtext.
i_userexit-type = 'Enhancement'. "#EC NOTEXT
i_userexit-modname = wa_modsapa-name.
i_userexit-txt = 'Determined from program DevClass'."#EC NOTEXT
i_userexit-pname = 'Unknown'. "#EC NOTEXT
append i_userexit.
endif.
endselect.
endif.
Get IDOCs
loop at i_devclass.
endloop.
endform. "GET_ADDITIONAL_DATA
& Form DATA_DISPLAY &
form data_display.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Prepare screen for display' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_userexit by type txt modname.
delete adjacent duplicates from i_userexit comparing txt modname.
format headings
write: 'Enhancements from main program'. "#EC NOTEXT
write: /.
uline.
format color col_heading.
write: / sy-vline,
(12) c_col1, "Enhanmt Type
sy-vline,
(40) c_col2, "Enhancement
sy-vline,
(30) c_col3, "Program/Include
sy-vline,
(20) c_col4, "Enhancement name
sy-vline,
(60) c_col5, "Enhancement description
sy-vline,
(8) c_col6, "Project
sy-vline,
(1) c_col7, "S
sy-vline,
(12) c_col8, "ChangeName
sy-vline,
(10) c_col9, "ChangeDate
sy-vline.
format reset.
uline.
format lines
loop at i_userexit.
set line colour
case i_userexit-type.
when 'Enhancement'.
format color 3 intensified off.
when 'BADI'.
format color 4 intensified off.
when 'BusTrEvent'.
format color 5 intensified off.
when 'Program Exit'.
format color 6 intensified off.
when others.
format reset.
endcase.
write: / sy-vline,
i_userexit-type,
sy-vline,
i_userexit-txt(40),
sy-vline,
i_userexit-pname(30),
sy-vline,
i_userexit-modname(20),
sy-vline,
i_userexit-modtext(60),
sy-vline,
i_userexit-modattr-name,
sy-vline,
i_userexit-modattr-status,
sy-vline,
i_userexit-modattr-anam,
sy-vline,
i_userexit-modattr-adat no-zero,
sy-vline.
hide: i_userexit-type,
i_userexit-txt,
i_userexit-pname,
i_userexit-modname,
i_userexit-modtext.
endloop.
format reset.
uline.
user-exits from development class of function modules
if p_devc = 'X'.
write: /.
write: / 'User-exits from function module development class'."#EC NOTEXT
write: 157''.
uline (90).
write: 157''.
loop at i_devclass.
clear wa_modsapa.
select name from modsapa into wa_modsapa
where devclass = i_devclass-clas.
select single name modtext into corresponding fields of wa_modsapt
from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
format color 3 intensified off.
write: / sy-vline,
(12) 'Enhancement',
sy-vline,
wa_modsapa-name,
sy-vline,
wa_modsapt-modtext,
sy-vline.
endselect.
endloop.
uline (90).
format reset.
endif.
describe table i_fmodule lines w_linnum.
write: / c_fmod , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_func = 'X'.
display fuction modules used in program
uline (38).
write: 157''.
loop at i_fmodule.
write: sy-vline,
i_fmodule-name,
sy-vline,
i_fmodule-bapi,
sy-vline.
write: 157''.
endloop.
uline (38).
write: 157''.
endif.
describe table i_submit lines w_linnum.
write: / c_subm , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_subm = 'X'.
display submit programs used in program
uline (44).
write: 157''.
loop at i_submit.
write: sy-vline,
i_submit-pname,
sy-vline.
write: 157''.
endloop.
uline (44).
endif.
issue message with number of user-exits displayed
describe table i_userexit lines w_linnum.
message s697(56) with w_linnum.
endform. "DATA_DISPLAY
& User Selection Processing &
at line-selection.
get cursor field w_fsel.
case w_fsel.
when 'I_USEREXIT-MODNAME'.
case i_userexit-type.
when 'Enhancement'.
set parameter id 'MON' field i_userexit-modname.
call transaction 'SMOD' and skip first screen.
when 'BADI'.
check i_userexit-modname ne 'Dynamic call'.
set parameter id 'EXN' field i_userexit-modname.
call transaction 'SE18' and skip first screen.
when 'BusTrEvent'.
submit rfopfi00 with attr_typey_selm = 'A'
with event = i_userexit-modname(8)
via selection-screen
and return.
when others.
endcase.
when 'I_USEREXIT-PNAME'.
check i_userexit-modname ne 'Unknown'.
w_off = 0.
find '/' in i_userexit-pname match offset w_off.
if w_off = 0.
set parameter id 'RID' field i_userexit-pname.
call transaction 'SE38' and skip first screen.
else.
w_off = w_off + 1.
w_prog = i_userexit-pname+w_off.
set parameter id 'RID' field w_prog.
call transaction 'SE38' and skip first screen.
endif.
when others.
endcase.
Feel free to revert back.
--Ragu -
User exit/BADI for Return PO item delivery Address
Hi Guyz,
We have a requirement where in when a PO item is marked as return PO item(In ME21n/ME22n/ME23n We have check box at item level) and click on enter/Check/Save, In delivery address of item details we have to populate Vendor address. By default SAP populates Plant address. If we manually give Vendor number in item details=>Delivery address tab then it populates vendor address. We want to automate this functionality.
Is there any Exit/BADI which serve this purpose.
Note: We need this functionality for few doc types(i.e PO doc type should also be available in the exit).
Any ideas could be really helpfull.
Thanks,
Vinod.Hi,
there are some user-exit & enhancements....
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
M06B0003 Number range and document number
Some BADI s:
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Customer
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
SMOD_MRFLB001 Control Items for Contract Release Order
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_REQ_POSTED Purchase Requisition Posted
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_PURCHDOC_POSTED Purchasing Document Posted
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_BSART_DET Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN Commitment for return item
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CHECK_OA Check BAdI for Contracts
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
No.of Exits: 35
No.of BADis: 55
Arunima
Maybe you are looking for
-
Dynamic tables on one page - overflow problem with repeating header/footer
Hi, with the help of the user RADZMAR I was able to create dynamic tables.. But now, I have got the next problem. 2 different tables are placed on 1 page.Each of them should be dynamic. Please let me list what is working, and what not: each textfield
-
Coded Requisitions not showing up in autocreate
Our user was notified of requisitions via the workflower user web. They went in and worked the notifications, usually the requisitions would show up in autocreate so that a PO could be created from them. But this time they did not. Can anyone tell me
-
I would like to cancel out the option of private browsing please
I would like to cancel out the option for 'start private browsing' as my children use the computer and know this option is here.
-
Does anyone know how to remove user's access to the Default calc? Here's some background on what we're using. Essbase 9.3.1 External authentication (Shared Services) all users are members of groups only groups are provisioned - calc access with filte
-
Help me in Creating Function Module
Hi All, I am new to SAP, please help me doing the following task given to me. Given EE group and EE subgroup, how to write a custom function module that displays all the employees in it? The output should be displayed in 2 tables where first table ha