Exit button - Germany Personal data service does not work

Hi all,
We just upgraded our portal to EP7 Sp22 with 1.3 ESS Business Package and 603 XSS components in the back-end.
In testing Germany and all countries that use the Germany personal data service, the Exit button on all screens (Overview, Edit, Review and Save, Confirmation) does not work. The Exit button, when selected, keeps the user on the same screen.
I am not sure where the button is configured, but it should always take us back to the page from where the service was launched. So if I accessed through the Overview page or Personal Information page, and then click on the exit button, I should be taken back to one of those pages.
Where can we configure the exit button for the German Personal data service, so that it works and takes the user back to the page where they started.....?
Cheers!, Neeta

Hi,
The Germany personal data service is the only one where the exit button is not working. All other countries are testing fine.
Is it a customization issue on the back-end? The resource in spro for germany is configured with the pcd link of the german personal data i-view.
The other countries are also customized in the back-end with the pcd link of the appropriate i-view.
Regards, Neeta

Similar Messages

Data service does not work in conover, wi

Hello,
Inquiring to understand if any other Verizon wireless subscribers experience issues with using the data on their phones (email, web surfing, etc) in the northern Wisconsin area near Conover. This entire summer literally the internet is unusuable. We do have 1 to 3 bars of 3G service. Sometimes we will have 1 bar of LTE. Regardless - we get multiple timeouts on all of our devices (iPhone, Droid). This appears to happen to many people in this area.
I have called customer support - the first person was quite helpful. The second person I was handled off to said they would have someone contact us within 2 days which they have not. More so at the local Verizon (franchised) dealer they also mentioned many people have brought the lack of horrible data connectivity to their attention.
Frustrated we are forced to pay for a data service that is all but unusuable.
Honestly for Verizon saying they have the best coverage this is really misleading. Even AT&T has better coverage in this area. I switched from AT&T a few years ago because of the poor coverage and customer service.
I would like Verizon to address this lack of data issue. Be it tower or the backhaul - this level of service is unacceptable for Verizon.

Totally agree with Gozdog. Sometimes loading data looks like a dial up modem! Dropped my call 3 times while talking to technical support! If this is the best coverage I would hate to see the worst.

Date parameter does not work in SharePoint 2010 report using SQL 2008 Server Reporting Service

Here is the settings:
SharePoint 2010 with SQL server 2008 reporting services configured
When create a report for a SP list using SQL server report builder (3.0) the date parameter does not work.
The data parameter is set as "date and time" type and field name equals the col name in the SP list
When run the report, the whatever dates I select, the result is always the same, so the parameters do not take any effect.
Is any step missing?
Thanks for any advice !

Hi ,
How did you configure you "date and time" type parameter and field name equals the col name in the SP list?
Have you tested if other type parameter worked?
Have you tried typing the date format as 20140722 in your date parameter filed before run the report?
http://whitepages.unlimitedviz.com/2012/02/using-sharepoint-filters-with-reporting-services-parameters-for-personalized-reports/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Flex Data Services does not see remote methods in extended ColdFusion component.

I have created a remote service base component as a AModelService.cfc file. I extend that file to make my ModelService.cfc. When I configure the ColdFusion data service and point to ModelService.cfc and click next, I don't see any remote methods (there are none explicitly defined in the component) in the Service Operations window.
If I go back and point to AModelServide.cfc, the parent component, and hit next, I see all the remote methods that are defined in the parent component. So, either I am doing something wrong, or Data Services does not look at methods up the cfc prototype chain, which from an OOP standpoint means that instead of say creating one restful base class and being nice and DRY you can't. I.e. not OOP for data services. Is this a bug, or what?
Anybody get data services to work with extended service components?
Mark

Thanks for the reply. Yes, I did compile all the Java and it
works OK with a simple Java program. It just will not work in a
Flex application.
The java classes are:
RRA:
package blah.myPackage;
import java.util.List;
import java.util.Collection;
import flex.data.DataSyncException;
import flex.data.assemblers.AbstractAssembler;
class RRA extends AbstractAssembler
public Collection fill( List fillParameters )
RRS service = new RRS();
return service.getSome();
RRS:
package blah.myPackage;
import java.util.ArrayList;
import java.util.List;
import java.sql.*;
import flex.EORS.*;
class RRS
public List getSome()
ArrayList list = new ArrayList();
String str = "bob";
RR rr = new RR(str);
list.add(rr);
return list;
RR:
package blah.myPackage;
class RR
private String name;
public RR() { }
public RR(String name)
this.name = name;
public String getName()
return this.name;
public void setName(String name)
this.name = name;
I started with something that retrieved data from a database
but watered it down just to try and get some kind of communication
between Flex and Java.

Droid Razr Maxx HD Data & SMS does NOT work in South Korea

If you are going to South Korea this phone only operates as a "dumb phone" for phone calls ONLY. Data & SMS does not work at all. I contacted Global Support daily for one week with no resolution! I received conflicting information with 2 support folks telling me that the fix was to do a factory reset. So I reluctantly did this and it did not fix anything. It only wasted my time especially re-installing all my apps, etc. Then 4 support folks told me that you should never do this out of the country!! Anyway the last person i spoke to which was a network technician was very honest. He told me that I was "SOL" and he had no idea how to fix this problem. He said that he would have to get some teams together to try to fix the problem. And I was told that I would receive an email with an update. And of course I have not received any email of correspondence from Verizon. Very frustrating...

I found a solution. Okay so with the most recent update Verizon made the switch from sending text messages over their 1x network and moved them to their LTE (and possibly 3g) network, hence the reason they are sending so much faster. Today I was in a classroom that is underground and has terrible reception and noticed that I was getting delivery reports again but that my texts were sending slower, like they used to. I dug around in the phones programing menu and found a new option call "MO SMS over IMS" and it was enabled. Disabling it switches your texts back onto the old 1x network. So if you choose to make the switch, your delivery reports will come back but sending will go back to being a little slower. To get to this menu open up your dialer and type in ##7764726. Next hit send and when prompted with a password type in 000000 and hit verify. Scroll down to SMS/MMS settings and select it. Next scroll to the bottom, select "MO SMS over IMS", and disable it. Now your good delivery reports back!

In 5s, personal hot spot does not work from time to time. Not detected

In 5s, personal hot spot does not work from time to time. Iphone does not get detected on Wi-fi or bluetooth. Restarting or rebooting does not help.

Settings, general, reset and reset network settings. Clear out your network settings and set personal hotspot again.
also avoid special characters making a password. hashtags or open brackets for example doesn't work too good.

Use member on data form does not work

Hello,
"Use member on data" option does not work on composite Data Form. Business rule associated with composite form.
Who is resolve this problem?
Version hyperion: 11.1.2
Thanks

I don't have a solution for you but more steps to solve the problem
You are ultimately on the right track in some ways but break it down into it's components.
The problem could like in the business rule, the form connection, the variables, even the order of operations could all be in play.
So I would strip this baby down to its bare bones then build it back up.
1) Run the business rule. Each one separately and only after the previous ones is complete without variables and without touching the form
Is it successful: go to 2
If it isn't successful: trouble shoot the calc and or try running in EAS natively to see if that gives you ideas
2) Run the calc outside the form but with variables included. Did it prompt you correctly.
Is it successful: go to 3
If it isn't. What is wrong with the variable
3) Now attach it to the form but don't hide the prompts
Still good go to 4
4) hide the prompts and run on save
And if it fails on step four then it's not picking up the right variables in the prompt. And you need to look at why it wouldn't grab the right item.
This will isolate your problem for you and give you steps to fix it. Ultimately 99% of the time something did change in the structure for example that is impacting the calc. And when you isolate the problem this will reveal itself quite quickly.

Latexit service does not work in Keynote

Hi,
I would like to use the Latexit service to typeset an equation in Keynote. This works perfectly in Pages - I write the equation, select it, and hit my keyboard shortcut to call Latexit, which runs latex and returns an image and places it inline in the text.
This does not work in Keynote. The service is there, and it definitely runs latex on my equation, but the text just disappears and no image appears in its place.
Why does this work in Pages and not in Keynote. Is there anything I can do to get inline equations from Latexit in Keynote?
regards

Hi,
Apparently this is a limitation of Keynote, which is not able to insert an image in a block of text- which means its not able to do inline equations.
From the FAQ:
(Q): The service does not work with Keynote.
(A): The service does not work with Keynote 1, 2, 3, 4, 5, since Keynote cannot insert an image into a block of text; as a workaround, you can set in the Preferences, pane "Services", to register service calls in the history. That way, even if the service fails at inserting an image, this one becomes available in the history window, that could have been put in some corner for easy access.
So, a solution might be to use LatexIt to render the equation, and then insert the equation as an image into Keynote, but you then have problems to line it up with your text.
thanks for the help,

I just update my iphone 4s to ios 7.0.4 and update my macbook pro to ios maveric. Now, my iphone 4s does not sound form the speaker and the volume button up and down also does not work.I could hear the sound through the earphone. Also the airplay disapear

i just update my iphone 4s to ios 7.0.4 and update my macbook pro to ios maveric. Now, my iphone 4s does not sound form the speaker and the volume button up and down also does not work.I could hear the sound through the earphone. Also the airplay disapear. Please advice how to downgrade to the previous OS

Please try going to your settings area of your display. Click on General and go to 'reset all settings'
Good luck!

After upgrade date selection does not work in xml forms

Hi Experts,
since we upgrade the portal from 7.0.19 to 7.0.24 we have a problem with the timestamp in the xml forms in combination with IE7. When we click on the date selction button, the date screen appears and the form disappears. The only option we can choose is cancel and then the date selection screen disappears and the form is not comming back. Selecting a date en choose ok does not work. I tried with IE6 then it works fine. Before the upgrade it works fine with IE7.
How to solve this?
thanks in advance.
Vo.

I created a OSS message and the answer is : [Note 1491775 - XML Forms locked when closing browser window|https://websmp130.sap-ag.de/sap(bD1ubCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1491775]
gr
Vo.

Request Scope for portlets? Sharing data tutorial does not work for portlet

I created 2 identical applications, one that was a regular JSF web app, and one a JSR168 portlet. By following the "Sharing Data Between Two Pages" tutorial, I can get this technique to work without a problem in the web app, but the portlet (deployed locally using the pluto server) does not work. What is the difference between a regular app and a portlet app?
This shows that portlets apparently handle scope much differently than other applications, so any information relating to this would be helpful to pass along.

Portlet Life Cycle Differences
A portlet page is the same as a web application page in the Creator 2 application
model with differences only in the page life cycle. To best understand the life
cycle differences, you must first understand how a portal interacts with a portlet.
This interaction between portals and portlets is defined by the JSR-168 Portlet
specification. Typically a portal display in the web browser shows multiple
portlets. That is, when the portal page is displayed, there are actually multiple
portlets displaying or rendering their content. The job of the portal is to manage
how these portlets are displayed. Internally, the portal is responsible for telling
each portlet two things:
1. When to display itself
2. If there has been an action, such as a button press, performed inside that
portlet.
When a portal wants portlets to display their contents, the portal sends a render
request to each portlet showing in the portal. If one of the portlets showing in the
portal has a button tied to an action request, when that button is pushed, the
portal fires an action request for that portlet. In addition, the portal generates a
render request for the portlet and all other portlets on the page. You should note
that the portal implementation fires both action and render requests for each
action method on a portlet showing in the portal. The implication of this
interaction means the portlet page being rendered can not make assumptions
about the state of the values to be shown. Unlike a normal web application page,
a portlet page can't assume that the page being rendered in the Render Response
phase is the same page that was built in Restore View. If a portlet wants to
maintain state across repeated render requests, the portlet must use the session
bean to store stateful information.
The main point to remember is a portlet page must always be prepared to render
it's values from scratch or session data. This implies you should never bind
portlet page UI components to page bean properties or request bean properties.
Also, you should never rely on page bean instance variables that might be set
during an action event.
Hope this helps.

My sons power button on his iPhone 4S does not work any more, does anyone know how much it will cost to fix? 1 year warranty just ran out.

My sons iPhone 4S power button does not work any more, does anyone know how much it costs to fix? 1year warranty has just expired

Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model
Out-of-Warranty Service
iPhone 5s, iPhone 5c,
iPhone 5
$269
iPhone 4S
$199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.

The menu button on the click wheel does not work!!!

I just got my I pod nano Black(2gb) and for some weird reason the 'menu' button on the wheel just does not respond. So i cannot go back to the previous menu or reset. What do i do????

See this.
How to reset the iPod if the buttons appear frozen.
It may take quite a few attempts and is best done connected to power.

The attach a file button (in netzero e-mail) does not work in firefox but does in explorer

The "attach file button" (in net zero e-mail) does not work in firefox but does in explorer.
== URL of affected sites ==
http://

*Tools > Options > Privacy > History: Firefox will: "Use custom settings for history"
*Tools > Options > Privacy > History: "Remember search and form history"
See also [[Form autocomplete]]

Delphi Client Web Service does not work fine

I wrote a Hello web service with a method and with a parameter, and import WSDL in delphi, All works very well. But when I add two parameters I receive the error below:
java.lang.IllegalStateException: Cannot obtain java type for: {urn:CalculatorFacade/types}add
at org.jboss.axis.description.ServiceDesc.syncOperationToClass(ServiceDesc.java:710)
at org.jboss.axis.description.ServiceDesc.getSyncedOperationsForName(ServiceDesc.java:1187)
at org.jboss.axis.description.ServiceDesc.loadServiceDescByIntrospectionRecursive(ServiceDesc.java:1045)
at org.jboss.axis.description.ServiceDesc.loadServiceDescByIntrospection(ServiceDesc.java:972)
Using the google I discovery this tutorial.
http://www.javapassion.com/planning/handsonbyol/netbeanswebservices
I wrote a calculator web service with Netbeans and deploy it on jboss-4.0.3.
So I was change my project parameters to change wscompile parameters: rpcliteral, strict
When I execute the code: x = calc.add(a, b)
I receive another error:
faultDetail:
{http://xml.apache.org/axis/}stackTrace: javax.xml.rpc.JAXRPCException: No such operation 'int_1'
at org.jboss.axis.providers.java.RPCInvocation.prepareFromRequestEnvelope(RPCInvocation.java:273)
at org.jboss.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:103)
at org.jboss.axis.providers.java.JavaProvider.invoke(JavaProvider.java:358)
I test this web service in a Java client and it works very fine, but with delphi client it does not work :(
Can someone help me?
[]s, Welington B. Souza

Welington,
Could you post the source of the web service that gives you the error?

Exit button - Germany Personal data service does not work

Similar Messages

Maybe you are looking for