Exit for assigning mat doc number range in MIGO

TCode MIGO
I want to assign number range for material document on the basis of Plant and the same is not availabe via standard customizing.
Can anybody suggest any user exit  or BADI for the same

the following user exits and badi's mite help
'BADI_MATERIAL_REF'
user exit
MGA00001 - Material Master (Industry): Checks
and Enhancements
MGA00002 - Material Master (Industry): Number
Assignment
regards
navjot
reward points for helpfull
MGA00003 - Material Master (Industry and
Retail): Number Display
Message was edited by:
        navjot sharma

Similar Messages

  • User Exit/BADI to pass external number range in CRM 2007

    Hi,
    In CRM 2007, Is there any User Exit or BADI to pass number range object externally ?
    Like USEREXIT_NUMBER_RANGE routine in MV45AFZZ include ( ECC ).
    Business requirement : separate number series is need to be maintained for each service location.
    Kindly help if you know the solution.
    Thanks
    Bhanu

    Hello Bhanu,
    You need to follow following steps to do so:
    Create an external number range in SNRO.
    Assign this number range to your transaction type in transaction processing configuration part.
    Create an implementation for BADI CRM_ORDERADM_H_BADI or ORDER_SAVE. Now depending upon your condition you can assign the number to the Object id here in the work area.
    I hope this helps.
    Thanks
    Vishal

  • An error in cash jounal:For object CAJO_DOC2 AAA, number range interval 01

    hi
    whan i am doing an entry in cash journal(in cas receipts) and post when a massege coms here "For object CAJO_DOC2 AAA, number range interval 01 does not exist"
    can anybody help me and solve it.
    thanks

    HI,
    First Method
    Go to TCODE "SNRO"
    Give the Object as "CAJO_DOC2"
    Click on the "Number Ranges"
    Give the Company code
    Click on the Change Intervals.
    Mainatain number range 01 and save.
    Second method
    use path Spro>FA(NEw)>Bank accounting>Business transactions>Cash Journal-->Define Number Range Intervals for Cash Journal Documents
    Or Tcode FBCJC1 to maintain number range intervals.
    An assumption to the above solution is that you have assigned the FI document type with which these documents should get posted with in the following path an dthe number range for that document type is alreday defined.
    Spro>FA(NEw)>Bank accounting>Business transactions>Cash Journal-->Set Up Cash Journal
    With adopting one of the above solutions you will be able to post the transactions.
    Reward points.
    Sarma

  • Error: For object RF_BELEG 9000, number range interval 92 does not exist FB

    Hi,
    When I am executing AFAB in test run mode for a particular company code I am getting below mentioned error:
    +For object RF_BELEG 9000, number range interval 92 does not exist FBN1+
        +Message no. NR751+
    +Diagnosis+
        +The database table NRIV has the delivery class 'C', i.e. the SAP default+
        +settings are only in client 000.+
    +Procedure+
        +Create the missing number range interval in customizing.+
        +Transaction code: FBN1+
    When I maintain number range 92 this error goes away. My question is we have no where assigned this number range 92 to any of the Document type then why system is asking to maintain the same?
    Sanjay

    Hi,
    You might be using the number range (say 92 which you've created in GL view & not in ENTRY view).
    Steps:
    Go to Define Document Number Ranges for Entry View OR use T-code FBN1.   Maintain & Assign two Number Ranges say 91 & 92 one for Document Type AF and another for AE for both the non-leading Ledgers say Y1 & Y2 ( Define Document Type for Entry VIew in a ledger). Also assign a number range to
    Document type SX (Closing Posting) apart from the above two Number Ranges (91 & 92)
    Hopefully it works for You............
    Dipti

  • For object RF_BELEG OK03, number range interval 33 does not exist

    Hi. After new year I opened financial and material periods (01/2008). When I want to make some movement in MB1B - the communicate occurs:
    For object RF_BELEG OK03, number range interval 33 does not exist
    Could You give me some tip what should I do now?

    go to j1i9  or  snro
    enter uour object name
    assign here
    no range 33

  • For object rf_beleg 3000 number range inerval 50 does not exist FBN1

    for object rf_beleg 3000 number range inerval 50 does not exist FBN1
    in ob52 i see the following for my cc 3000
            from period1   year    to period   year     from period 2   year  to period year
    3000+        1         2003       12        2007         13                2007   16  2007
    3000A        1        2003        12       2007
    3000D        1        2003         12      2007
    3000K        1        2003         12      2007
    3000S         1       2003         12      2007
    when i try to post a goods movement for a po i get the following error
    for object rf_beleg 3000 number range inerval 50 does not exist FBN1
    is something wrong in this table???????
    any help would be great
    thank you in advance

    Hi
    This is not connected with Posting periods but with  document number ranges.
    Create document Number range interval 50 for year 2007 using T.code FBN1.
    This should solve ur problem
    Regards
    Aravind
    Assign points if useful

  • For object RF_BELEG 2020, number range interval 50 does not exist FBN1

    Hi Guru's
    While posting GR i am getting this error
    For object RF_BELEG 2020, number range interval 50 does not exist FBN1
    kindly guide me to slove this error. Thanks in advance
    Regards
    Anandh

    Hi Piyush Mishra
      I have entered the number range intervals in FBN1. Still the error is existing.
      Number range interval 50 means ?? Any specific range of 50 we should give ???
    regards
    anandh

  • For object RF_BELEG LT, number range interval 50 does not exist FBN1

    dear all
    system showing this message (For object RF_BELEG LT, number range interval 50 does not exist FBN1)

    Hey Manish,
    You can use these t-codes.It can be solved with all together number ranges.
    1- OBH2
    In this activity, you can determine which intervals of document number ranges are to be copied from one fiscal year into another per company code.
    2- OBH1
    In this activity, you can copy intervals of document number ranges from one company code to other company codes. To do this, you have to store the following information:
    Wish you all the best.
    Onur

  • For sweden the employee number range is completed Eg:23000000 to 239999999 now how to generate next employee id

    For sweden the employee number range is completed Eg:23000000 to 239999999 now how to generate next employee id

    Hi Bharathi,
    If required no ranges are not there which you want to add then will not be problem and you can extend the 23999999 to your next limit like 39999999 check the overlapping.
    Check extended no rage are present in the system and then system would not except because of overlapping.
    Check and tell.
    Regards,
    Sankarsan

  • Any FM for create an external number range for equipment number ????

    Hi all,
    Any FM for create an external number range for equipment number??????
    thanks & regards
    indu.

    Hi
    you can use below FM to get number range
       CALL FUNCTION 'NUMBER_GET_NEXT'
        EXPORTING
          nr_range_nr                   = 'Z1'
         object                        = 'ZTEST'
         object                        = 'ZFIREC'
         quantity                      = '1'
         subobject                     = p_compcd
         toyear                        = p_fisc
       IMPORTING
         number                        = v_seqno.
    thanks & regards,
    bhupal.

  • User-Exit for changing Sales Document Number - Urgent

    Hi Experts ,
                     Please suggest me the <b>User Exit for changing Sales Document Number.</b>
    thanks,
    Jayesh<b></b>

    hi jayesh,
    chech this exit-----EXIT_SAPFV45S_002.
    this exit's description says " Change Sales Document Using Configuration".
    Other available exits are
    SDAPO001            Activating Sourcing Subitem Quantity Propagation
    SDTRM001            Reschedule schedule lines without a new ATP check
    V45A0001            Determine alternative materials for product selection
    V45A0002            Predefine sold-to party in sales document
    V45A0003            Collector for customer function modulpool MV45A
    V45A0004            Copy packing proposal
    V45E0001            Update the purchase order from the sales order
    V45E0002            Data transfer in procurement elements (PRreq., assembly)
    V45L0001            SD component supplier processing (customer enhancements)
    V45P0001            SD customer function for cross-company code sales
    V45S0001            Update sales document from configuration
    V45S0003            MRP-relevance for incomplete configuration
    V45S0004            Effectivity type in sales order
    V45W0001            SD Service Management: Forward Contract Data to Item
    V46H0001            SD Customer functions for resource-related billing
    V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
    Enter these exits name in SMOD transaction and select components. u can find all the user exits available for this exit name.
    Reward me if useful..........
    Harimanjesh AN

  • Documents manually posted within dep.doc.number range

    Hi All,
    I am running the AFAB and this error message is displayed.
    "Documents manually posted within dep.doc.number range"
    I am using the document type AF with the external number range
    AF     2008     1120000000     1129999999
    Do you have any idea what is happening?
    Thanks in advance,
    Miguel.

    Hi,
    I experience the same thing and I'm using ver 4.6C. I've tried to insert the additional number range in FBN1 but I have to remove the extenal number indicator first before I can enter the number.
    But when I want to run the depreciation, I've got another error i.e. please create number range as external number. So i believe there is no effect.
    When I check in TABA, the number range still maintain the same.
    Please help coz my user need to view their asset balance urgently.

  • Exit for assigning external number range to sales document

    hello friends,
    can anyone help with this issue.in tcode 'vn01' we are assiging internal number range but we dont want that number range that is external number range rather than using internal number for sales document.i.e the number range should start with 'ufc'followed by some number range.
    plz reply as soon as possible .
    thanks and regards,
    siri

    Hi Sirisha,
    I believe you can assign external number range manually by using transaction SNRO and then assign the number range before entering into the main screen of  VA01 or saving the document.
    The number range is linked to the order type (VBAK-AUART), this is done in customizing.
    For different sales area it need to have different number ranges for the same order type.
    Please see that the same sales doument number should not be linked to several sales orders which are to be created,if I am not wrong
    Regards,
    Naresh
    ****Please do reward points if found useful

  • Change FI doc number range indicator from internally to externally assigned

    Hi,
    I created a new numberrange for 2011 but did not check the Ext (external number range indicator).
    When I try to change it to external by trying to mark the option, it does not work.
    What can cause this ??
    Thanks in advance,
    regards
    Peter

    Hi,
    check your settings in FBN1 for the number range. if the document number was assigned intially as internal and you are changing the setting in the next year system would not allow the change.The setting of No range is Co code specific if you change in one co code you will have to change in the other co codes.
    Please check and let me know.
    Regards
    K.R

  • User Exit for assignment number check

    Hi SAP GURUS,
    I want to have a cheque in system for not to enter a cheque number twice in assignement field. Which user exit i can use for the cheque payment made thru F-53 OR F-58 OR F110.
    Thanks
    CHEERS
    Edited by: NITIN on Apr 26, 2010 7:50 AM
    Edited by: NITIN on Apr 26, 2010 11:18 AM

    Identification of user EXIT
    1.     Enter T.code for which you want to maintain User exit. For ex : ME51 (Purchase requisition)
    Path:  Status Status Double Clicks on the program NameGo toAttributesNote down development class.
    For Ex : ME51u2014development class/package name is  ME
    2.     Enter T.code : SMODutilities FindEnter Development class/package name Execute
    3.     It shows all the Exit names. Click on Exit Name and click on Functional module name.
    for ex: f-53 having following exits.
    F050S001  FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
    F050S002  FIDCC1: Change IDoc/do not send
    F050S003  FIDCC2: Change IDoc/do not send
    F050S004  FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
    F050S005  FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
    F050S006  FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007  FIDCCH Outbound: Influence on IDoc for Document Change
    F180A001  Balance Sheet Adjustment
    FARC0002  Additional Checks for Archiving MM Vendor Master Data
    FEDI0001  Function Exits for EDI in FI
    RFAVIS01  Customer Exit for Changing Payment Advice Segment Text
    RFEPOS00  Line item display: Checking of selection conditions
    RFKORIEX  Automatic correspondence
    SAPLF051  Workflow for FI (pre-capture, release for payment)
    Thanks
    ANJI

Maybe you are looking for