Exit for Changing GL Account in VF01

Hi,
We have requirement where in we need to give a different GL account at the time of Billing through VF01 for a particular customer. We have ruled out using configuration of u201Crevenue account determinationu201D for some reasons.
I would like to know from the experts on the forum, whether there is any user exit that can be used to change the revenue account itself at the time of posting of accounting document while billing through VF01. I found the exit (EXIT_SAPLV60B_004: Change a GL account item ACCIT You can add information to a GL account item (such as quantity specifications) with this exit). Please advise if this exit can be used to change the GL account itself.
Thanking you all.
Regards
SAI

Hi,
Your question is not clear. I could provide tables for Incoming Invoice, RBKP (Header), RSEG (Item).
Regards
Mohammad Shaik.

Similar Messages

User Exit for Changing G/L account in Accounting Document

hi all,
This one is urgent for me. If you guys can help.
Iam looking for a user-exit to change the G/L account while posting the accounting document.
If someone has worked on a similar user-exit Kindly help.
Thanks and Regards
Varun

Hi Experts,
The requirement is to change the GL account when PGI is done for a delivery.
I have coded in the above user exit for changing the GL account. I am facing the issue here.
I am changing the GL account through a user exit, but even before the user exit is called the standard SAP is throwing a error.
the Error is GL account is blocked for posting in the company code. This check is happening for the GL account what standard SAP proposes from the customization. The GL account that is getting picked is blocked in SPRO for posting in the mentioned company code. Because of the error message, our z code is not getting executed.
Kindly suggest if some user exits that can be used even before this error message. or let me know if you have any suggestions to over come this.
I have coded this in the enhancement point. Include MM07MFK0_KONTIERUNG_PRUEFEN and subroutine kontierung_pruefen.
Thanks,

BADI/EXIT for changing line items (F-02)

Hi All,
I want to know any BADIs/EXITs which allow changing of G/L line items in transaction f-02. I have tried substitution it does not work for my requirement.
My requirement is copying of PRCTR from offset line item to the Vendor/customer line item which always appears as line item 001.
Thanks,
Preetham S

F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002            FIDCC1: Change IDoc/do not send
F050S003            FIDCC2: Change IDoc/do not send
F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006            FI Outgoing IDoc: Reset Clearing in FI Document
F050S007            FIDCCH Outbound: Influence on IDoc for Document Change
F180A001            Balance Sheet Adjustment
FARC0002            Additional Checks for Archiving MM Vendor Master Data
FEDI0001            Function Exits for EDI in FI
RFAVIS01            Customer Exit for Changing Payment Advice Segment Text
RFEPOS00            Line item display: Checking of selection conditions
RFKORIEX            Automatic correspondence
SAPLF051            Workflow for FI (pre-capture, release for payment)

Badi or Exit for changing subscreen in PO

Hi Friends,
Is there any Badi or Exit for changing shipping subscreen at item level for Purchase order.actualy my requirement is to supress all fields on shipping subscreen(Item Level) except route.How can I do it????
Please help...

MM06E005 - screen exits contains subscreen of PO header & Item
AMPL0001 - this is a screen exits without field .
use the first exit and check it.

Is there any user exit for changing V1 field value?

Hello Expert,
Is there any user exit for changing V1 update value?
For example, sales order number will populate 2LIS_11_VAHDR-VBELN. If other value need to populate 2LIS_11_VAHDR-VBELN, can we use any user exit to customize the V1 routine?
Please forget the enhancement for 2LIS_11_VAHDR. Just populate the system field VBELN.
Thanks
F-B-I

Hi,
Use the 'usual' user-exit for transactional data in R/3 EXIT_SAPLRSAP_001 (CMOD). Here your can overwrite VBELN for each extracted record with the value you want.
Hope this helps.
Grtx
Marco

User-Exit for changing Sales Document Number - Urgent

Hi Experts ,
 Please suggest me the User Exit for changing Sales Document Number.
thanks,
Jayesh

hi jayesh,
chech this exit-----EXIT_SAPFV45S_002.
this exit's description says " Change Sales Document Using Configuration".
Other available exits are
SDAPO001 Activating Sourcing Subitem Quantity Propagation
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Enter these exits name in SMOD transaction and select components. u can find all the user exits available for this exit name.
Reward me if useful..........
Harimanjesh AN

User exit for changing operation scap in PP order

Hi,
I want to know user exits for changing operation scrap in PP production order. Please help
Regards
Shalini

I could found only one at the moment...
QEVA0002 - Calculation of share of scrap in inspection lot
check if it is helpful.....else u can go on
CMOD - Utilities - SAP Enhancements - (Remove Maximum No of fields) - Execute (F8)
You will get all user exits.
Now i need points.... :)...My score is not gettin increased... lolz
kapil

USER EXIT FOR CHANGING POSTING DATE IN THE MATERIAL DOCUMENT

Hi,
Pls advise any USER EXIT FOR CHANGING POSTING DATE IN THE MATERIAL DOCUMENT.
Regards,

Hi,
There is another user exit for updating material document data Upon posting is MB_CF001
I hope this will fullfill you.
Prem

MIRO USEREXIT for change GL account

I have the requirement
when i post the invoicement for good receipt
I need change the GL account by purchase group
anyone can give me some suggestion about use which userexit?

Hi,
You can use user exit ZXMBCU02 in enhancement -
MBCF0002 ( EXIT_SAPMM07M_001 ).
However you cannot directly chnage as MSEG is available as importing parameter and whatever you change here will have no impact on main prog. Instead you can use following code -
FIELD-SYMBOLS <F2> TYPE ANY,"Field Symbol for the GL ACCOUNT
DATA : W_KONTO_NAME(50) VALUE '(SAPMM07M)DM07M-KONTO'.
ASSIGN (W_KONTO_NAME) TO <F2>.
MOVE "GLACCOUNT" TO <F2>.
"GLACCOUNT" is the new GL account you want to change.
or try field exit:
report RSMODPRF
Regards,

User exit for changing Sales order lines.

Hello experts ,
I want to delete the field "ROUTE" from all of the orders lines in sales orders, I have been using "USEREXIT_SAVE_DOCUMENT_PREPARE" but it does not seems to do the job.
What is the name of user exit that i have to use for this task and which structure should be used, is it xvbap ? is it vbap ?
Thanks for the help.
Avi.

Hi,
find the user exit u required.
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
Best regards,
venkatawamy.y

Extended Idoc - User exit for delivery VL01 and Invoice VF01

Hi Experts,
We are developing Extended Idoc for order - cash cycle.The extended Idoc contains 4 extra fields.
I want to know the User exits where i can populate the extended segment field values for VL01 and VF01 transactions.

HI
exits available for VL01.
VMDE0004                                Shipping Interface: Message SDPACK (Packing, Inbound)
VMDE0003                                Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0002                                Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0001                                Shipping Interface: Error Handling - Inbound IDoc
V53W0001                                User exits for creating picking waves
V53C0002                                W&S: RWE enhancement - shipping material type/time slot
V53C0001                                Rough workload calculation in time per item
V50S0001                                User Exits for Delivery Processing
V50R0004                                Calculation of Stock for POs for Shipping Due Date List
V50R0002                                Collective processing for delivery creation
V50R0001                                Collective processing for delivery creation
V50Q0001                                Delivery Monitor: User Exits for Filling Display Fields
V50PSTAT                                Delivery: Item Status Calculation
V02V0004                                User Exit for Staging Area Determination (Item)
V02V0003                                User exit for gate + matl staging area determination (headr)
V02V0002                                User exit for storage location determination
V02V0001                                Sales area determination for stock transport order
For VF01..
Enhancement
V61A0001                                Customer enhancement: Pricing
V60P0001                                Data provision for additional fields for display in lists
V60A0001                                Customer functions in the billing document
V05N0001                                User Exits for Printing Billing Docs. using POR Procedure
V05I0001                                User exits for billing index
SDVFX011                                Userexit for the komkcv- and kompcv-structures
SDVFX010                                User exit item table for the customer lines
SDVFX009                                Billing doc. processing KIDONO (payment reference number)
SDVFX008                                User exit: Processing of transfer structures SD-FI
SDVFX007                                User exit: Billing plan during transfer to Accounting
SDVFX006                                User exit tax line in transfer to accounting
SDVFX005                                User exit reserves in transfer to accounting
SDVFX004                                User exit G/L line in transfer to accounting
SDVFX003                                User exit cash clearing in transfer to accounting
SDVFX002                                User exit for A/R line in transfer to accounting
SDVFX001                                User exit header line in delivery to accounting
J_3RSINV

PPCO0007 User Exit for Changing Header Fields During Order (CO40)

.. Hi !!!!
I need your help or suggestions,
I need to change the standar order before to save, i found the user exit PPCO0007,
i assign the new value for the order, but when finish the fuction, EXIT_SAPLCOZV_001, the new values are
lost, and finally the system set the standard order.
Someona know how can change the order and the the batch.
Thanks
Noemí Huerta

Hi Noemi
You can use the enchancement PPCO0007 (exit when the production order is saved).
Use the function module EXIT_SAPLCOZV_001 (User Exit for Checking or Changing Header Fields During Order Save) to update the field priority starting the information in the material-customer info record.

User Exit for Changing Quantity in Process Order , COR1, COR2

Hi All,
Can anyone point me towards the light in User exit related to COR1 and COR2.After the Creation of Process order while saving i need to write a code that rounds off the quantity values.
I tried to change the values in the below user exits but i was not succesfull.
CCOWB001 Customer exit for modifying menu entries
COIB0001 Customer Exit for As-Built Assignment Tool
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
PPCO0001 Application development: PP orders
PPCO0002 Check exit for setting delete mark / deletion indicator
PPCO0003 Check exit for order changes from sales order
PPCO0004 Sort and processing exit: Mass processing orders
PPCO0005 Storage location/backflushing when order is created
PPCO0006 Enhancement to specify defaults for fields in order header
PPCO0007 Exit when saving production order
PPCO0008 Enhancement in the adding and changing of components
PPCO0009 Enhancement in goods movements for prod. process order
PPCO0010 Enhancement in make-to-order production - Unit of measure
PPCO0012 Production Order: Display/Change Order Header Data
PPCO0013 Change priorities of selection crit. for batch determination
PPCO0015 Additional check for document links from BOMs
PPCO0016 Additional check for document links from master data
PPCO0017 Additional check for online processing of document links
PPCO0018 Check for changes to production order header
PPCO0019 Checks for changes to order operations
PPCO0021 Release Control for Automatic Batch Determination
PPCO0022 Determination of Production Memo
PPCO0023 Checks Changes to Order Components
STATTEXT Modification exit for formatting status text lines
Reason was the data related tp materials was not accesble at this point and residing in resb internal table .
Any suggestions ? Ideas ?
Thanks in advance,
Gowri

Hi,
Try with BADI WORKORDER_UPDATE.
Regards

Customer exit for changing order quantiy and scrap quantiy in MD11?

Hi gurus,
My objective is to update the order quantity and scrap quantiy field as per some logic and overwrite the existing values in MD11 (create planned order). Can you suggest the correct exit for incorporating these changes
Thanks

Hi,
Try LMDR2001 and LMDZU001.
Hope this is useful.
Regards

Badi or user exit for changing currency INR to EUR

hi friends,
in po header there is one tab called status.
in this tab there is one field called delivery payment
which has curr INR but i want to change that INR CuRR
to EUR.Can any one tell me how do this is there any badi or user exit
for this req.
thanks.

Hi Sonu,
Use the following program to find out the appropriate user exist for ur transaction:
REPORT ZGURU_USER_EXIT_FIND .
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc,     "SAP Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
Find SAP Modifactions
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Then u can use the function CONVERT_TO_LOCAL_CURRENCY to change the amount from INR to EUR.
Regards,
Himanshu

Exit for Changing GL Account in VF01

Similar Messages

Maybe you are looking for