Exit for ME21n while saving
Hi,
Let me know if there is any exit while saving ME21n tran.
Requirement is while while saving the PO,a pop-up information message should be displayed depending on certain purchase organization validation.
Do let me know.
Regards,
SP
Hi,
Below is the enhancement: MM06E005 (Check in SMOD) and in that enhancement, there is an customer exit: EXIT_SAPMM06E_012 where in you can perform the validations for the purchasing document.
Since your requirement is at header data(Purch Org) the same is available in I_EKKO parameter of the customer exit EXIT_SAPMM06E_012.
Implement this exit and throw an information/error message upon validation
Hope this helps
regards
Shiva
Similar Messages
-
User Exit for ME22N while saving of PO
Hi all,
i want a USER EXIT for ME22N while saving. i want EKET data.
After checking EKET data, i want to chage EKPO data.
Thanks
pabiHi,
Below Exit you can have access to EKET and EKPO data in the tables paramters before the SAVE
EXIT_SAPMM06E_012
TEKPO: EKPO data
TEKET: EKET data
Enhancement:MM06E005 (Check in SMOD transaction)
Check for one Paramter: I_TRTYP (This is for Create/Change/Display Modes) or You can check on Sy-Tcode = ME22N
Hope this helps
Regards
Shiva -
User exit for MIRO while saving
Hi
I need to validate the Company code in Txn MIRO with the company code of the PO that's been processed
Is there any user-exit which gets triggered while saving the document in txn MIRO.
I know the following BADI INVOICE_UPDATE gets triggered while saving the documents, as i am new to the BADI functionality, i am unable to proceed further with the implementation of it in the system.
Can some one let me know how to implement a BADI.
CheersHi Sushis ,
check this link abt badi
http://help.sap.com/saphelp_nw04/helpdata/en/ee/a1d548892b11d295d60000e82de14a/content.htm
and u have to choose this method is useful
<b>CHANGE_AT_SAVE Invoice Document at Save
CHANGE_BEFORE_UPDATE Invoice Document Before Update
CHANGE_IN_UPDATE Invoice Document During Update</b>
let me know if u required more info.
regards
Prabhu -
User exit or BADI while saving purchase order
Hello,
I want to use an user exit or BADI while saving of purchase order. The objective is to check the material group of the line item while saving. We don´t want to allow to save purchase orders for one material group.
Can you please guide me.
Thanks
SrinivasanHi
The Business Add-In (BAdI) ME_PROCESS_PO_CUST enables you to extend the business logic of the Enjoy purchase order on an individual basis.
You can thus influence the dialog transactions ME21N, ME22N, ME23N, and ME29N, and the BAPIs BAPI_PO_CREATE1 and BAPI_PO_CHANGE.
Typical applications for this BAdI include:
Processing of own objects
Processing of additional data on standard objects
Implementation of additional checks and derivationsChange of data in standard fields
Change in field selection
you can use this BADI for checking the material group
Thanks & Regards
Kishore -
Hi,
Need your help for solving an issue related to ME21N ( Purchase Order Creation)
I am having ZVRL(say) condition type that is mandatory and is defined in pricing schema ZVVA01(say).ZVVA01 is further attached to purchase organisation 4000 (say).
I am having a document type ZVVN . I want to save the purchase order without ZVRL (Defined as Mandatory condition) for particular document type ZVVN. But as ZVRL is mandatory condition , So system does not allow me to save the purchase order.
For solution following option have been ruled out by the client-
1) Through a separate vendor schema with different purchase organization.
2) Entering any value like .01 or .002 for the mandatory condition type that is for ZVRL.
Other than above two, Can anyone please tell me if there is any exit/badi/ or pricing routine available through which we can avoid mandatory ZVRL condtion for particular document type ZVVN at the time of saving and changing the Purchase order.
Thanks
Deepak GuptaHi,
Check all user exit for ME21N
Transaction Code - ME21N Create Purchase Order
Exit Name Description
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processin
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
See which is suitable for your requirement. -
HI all,
I want to add a function module when a Purchase order is saved(ME21n), i want to know how to find user exit for ME21n & which user exit to be changed.
I want to call a function module when the user saves the purchase order, please help.
Please also let me know the step to find the user exits.
Thanxs in advance.Hi,
Please check enhancement MM06E005 (SMOD).
Here list of User exit and BADI for ME21N .
Transaction Code - ME21N Create Purchase Order
Enhancement/ Business Add-in Description
USER EXIT
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MM06E011 Activate PReq Block
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMEKO001 Extend communications structure KOMK for pricing
LMEKO002 Extend communications structure KOMP for pricing
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
M06B0003 Number range and document number
M06B0002 Changes to comm. structure for purchase requisition release
Business Add-in - BADI
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Customer
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PURCHDOC_POSTED Purchasing Document Posted
ME_RELEASE_CREATE BAdI: Release Creation for Sched. Agreemnts with Rel. Docs
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_REQ_POSTED Purchase Requisition Posted
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
MM_EDI_DELFOR_OUT Enhancements for IDoc Output of SA Releases: Internal
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_EDI_ORDERS_OUT Enhancements for IDoc Output of Purchase Order: Internal
SMOD_MRFLB001 Control Items for Contract Release Order
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
ME_BAPI_PR_CHANGE_01 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Change)
ME_BAPI_PR_CHANGE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Change)
ME_BAPI_PR_CREATE_01 BAdI: Enjoy BAPIs for Purchase Requisitions
ME_BAPI_PR_CREATE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Create)
ME_BSART_DET Change document type for automatically generated POs
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIP_REF_CHAR Facilitates Reference Characteristics in Purchasing
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
<b>Reward points</b>
Regards -
User exit - for ME21N, 22N, 23N - at line item level
Hi,
I want to add new text field to display the description of the MPM(material) in it.
That filed I want to add to the Account Assignment tab at item level.
How to add that field on the screen, I mean any screen exit for this?
and function module to pass the data to that field.
If anybody worked on such problem then pls. let me know.
Thanks in advance.
-- UmeshHi,
These are the user exits for me21n.
AMPL0001
LMEDR001
LMELA002
LMELA010
LMEQR001
M06B0001
M06B0002
M06B0003
M06B0004
M06B0005
M06E0004
M06E0005
ME590001
MEETA001
MEFLD004
MELAB001
MEVME001
MM06E001
MM06E003
MM06E004
MM06E005
MM06E007
MM06E008
MM06E009
MM06E010
MMAL0001
MMAL0002
MMAL0003
MMAL0004
MMDA0001
MMFAB001
Regards
praveen -
User exit or BADI for FB60 while saving data.
Hi All,
I want apply check while saving the document in FB60 transaction.
I want to check for account number and quantity.
I check some BADI and exits but couldn;t stop while saving the document.
If anybody has worked on this or have any idea let me know.
Thanks in advance.
- Umesh1. Try the BTE P/S events mentioend below. These should work for validation. Can be configured in transaction FIBF. You can create your own function module and add the validation.
<b>00001020</b> POST DOCUMENT: Prior to Final Checks
<b>00001025</b> POST DOCUMENT: Final Checks Completed
<b>00001030</b> POST DOCUMENT: Posting of Standard Data
2. You can also used Validation of Accounting documents;
Transaction: <b>OB28</b> -
User exit for ME21N (Not functional or customer exit)
Hi Guys,
I want to get a user exit for PO as my requirement is to call custom screen before the PO is getting saved.
I have the functional exits and badi's list which will not fulfill my requirement as because on my custom screen i have cancel button.
On clicking the control needs to come back to the me21n second screen with the data entered with out order getting created.
The screen number for the second screen in ME21N is 14.
if i call screen 14 it will work in a user exit where as in customer exit(functional exit) we have limitations with the exporting and importing as so the screen number will not be recognised.
I am able to do the same calling of cust screen in Sales order creation and is sucessfull, the same should happen with PO also.
Probably if the user exit triggers at the time of syntax check i can achive my requirement rather than at save as the call back to the screen will not harm and database commits will not take place.
I also tried with all most of the enahancement points but the call screen statement is not working at any point of time which worked with Sales order exits. So i tried with making the validation fail but still by that time the PO number is getting generated and so if i try to cancel the PO before save and trying to get PO in edit mode but the sequence number is getting missed by by 1.
Please help.
Regards,
Amar.
Edited by: amar srinivas on Feb 11, 2011 10:16 AM
Edited by: amar srinivas on Feb 14, 2011 4:56 PMHi,
You can try it this way.
Check badi ME_PROCESS_PO_CUST , method - CHECK.
This badi/method gets triggered when the "CHeck" button and "SAVE" button is pressed.
It consists of a changing parameter CH_FAILED . Pass X to it when cancel button is hit in your custom screen.
Donot use any commit in this method. Read the documentation before doing it. -
Exit for ME21N on pressing SAVE
Hi,
I am looking for an Exit which is triggered when i click on SAVE i.e. to save a PO in transaction ME21N.
My requirement is that I want to fetch PO Header level - Name and Address details of Vendor, on saving the PO, to corresponding fields of my Z table.
Can anyone tell me which Exit can be used? I would NOT prefer BADI's though!
Thanks.Hi,
Check with these exits.
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery toleranc
MM06E001 User exits for EDI inbound and outbound purchasing documen
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
hope this helps u,
Thanks. -
User exit that triggers while saving in transaction F-02
Can any one please tell which userexit trigers while saving The document in transaction F-02.
I have tried some exits but they are not triggered while saving.Hi Satya,
These are the User Exits for that T-Code.
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment).
Out of these, i am expecting one of the below is triggered while saving.
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
Regards, -
Badi & User Exit for ME21N & ME22N
Hi,
My requirement is when a Purchase order is created using ME21n or when a line is added or changed using ME22n, the system should copy the vendors tax jurisdiction to the purchase order line items jurisdiction code. I tried badi (ME_PROCESS_PO_CUST) but could not suceed. Can any one tell me if any badi or user exit available for the same???
Thanks in Advance.hi,
Enhancement/ Business Add-in Description
Enhancement
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MEETA001 Define schedule line type (backlog, immed. req., preview)
ME590001 Grouping of requsitions for PO split in ME59
M06E0005 Role determination for release of purchasing documents
M06E0004 Changes to communication structure for release purch. doc.
M06B0005 Changes to comm. structure for overall release of requisn.
M06B0004 Number range and document number
M06B0003 Number range and document number
Business Add-in
ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Customer
ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
ME_PO_PRICING Enhancements to Price Determination: Internal
ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
SMOD_MRFLB001 Control Items for Contract Release Order
MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP Determination of Delivery Address
ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
ME_REQ_POSTED Purchase Requisition Posted
ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_PURCHDOC_POSTED Purchasing Document Posted
ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
ME_BSART_DET Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN Commitment for return item
ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO Copy PO data for use by Country version India
ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
ME_CHECK_OA Check BAdI for Contracts
ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
No.of Exits: 35
No.of BADis: 55
Arunima -
Customer Exit for VF01 at Saving of Document
Hi friends,
I need a customer exit which will execute just after saving the Billing document number in T-code VF01 and have the data of VBRK and VBRP tables. I am having a list of Exits but which exit should I use, I am not confident.
The list is as follow.
Enhancement
J_3RSINV
V61A0001 Customer enhancement: Pricing
V60P0001 Data provision for additional fields for display in lists
V60A0001 Customer functions in the billing document
V05N0001 User Exits for Printing Billing Docs. using POR Procedure
V05I0001 User exits for billing index
SDVFX011 Userexit for the komkcv- and kompcv-structures
SDVFX010 User exit item table for the customer lines
SDVFX009 Billing doc. processing KIDONO (payment reference number)
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX006 User exit tax line in transfer to accounting
SDVFX005 User exit reserves in transfer to accounting
SDVFX004 User exit G/L line in transfer to accounting
SDVFX003 User exit cash clearing in transfer to accounting
SDVFX002 User exit for A/R line in transfer to accounting
SDVFX001 User exit header line in delivery to accounting
Business Add-in
VOR_WA_FAKTURA Billing before Goods Issue
SD_CIN_LV60AU02 BADI for billing
Please suggest any suitable way for the solution.
Thanks in advance.
Krishanhi ,
keeep break point like break <username> in exit and check ur transaction.
u will get the exit that is triggered during saving of transaction.
reward points if hlpful. -
Field Exit for ME21N & ME22N transactions
HI Friends,
I need to make the SAP Standard screen field "Overdeliv. Tol." & "Unlimited" to inactive under the Item level data --> Delivery tab in ME21N & ME22N transaction.
Can i do ths? If so give me the steps and Screen exit for the same...For User Exit's
goto to tcode->status->program name->double click on that,
then goto to-> attribute take the package name and
Goto SMOD tcode ->Utilities->give the package name and F8
then a list of exits will display for that tcode as well as that package.
double click on the exit u can see the Fm exit,screen exit,feild exit,include exit. there
u can check the table MODSAP
For BADI's,
1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
2)Goto to tcode->status->program name->double click on that program will display's
then press crtl+F then cl_exithandler
Thank u,
santhosh -
Exit for ME21N - Change value on SAVE
Hi everyone,
i'm looking for an exit or BADI in ME21N that allows me to change a specific value in table eket.
The idea is that after the SAVE, the field EINDT of EKET must be changed.
I had aldready tried to use some exits, but not even one worked.
Here's the list i tried:
EXIT_SAPMM06E_006
EXIT_SAPMM06E_007
EXIT_SAPMM06E_008
EXIT_SAPMM06E_009
EXIT_SAPMM06E_012
EXIT_SAPMM06E_013
EXIT_SAPMM06E_014
EXIT_SAPMM06E_016
EXIT_SAPMM06E_017
EXIT_SAPMM06E_018
Can anyone help me please?
Best regards,
Pedro
Message was edited by:
Pedro Rosa
Message was edited by:
Pedro Rosa
Message was edited by:
Pedro RosaCheck all available for ME21N
Transaction Code - ME21N Create Purchase Order
Exit Name Description
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
No of Exits: 35
Reward points if useful.........
Minal
Maybe you are looking for
-
Import from Entourage: Can't see any mails
I did the simple import from Entourage into Mail. I took a long time, and I could see the titles of all of the emails as they were imported (thousands), and it created folders and subfolders just as I had them in Entourage. But after the import, all
-
Latest quicktime version 7.1 with Pro/MPEG-2 Playback.
I just realized that the latest Quicktime version is 7.1 and noticed that the version I have is 7.0.4. My concern is that I also have Quicktime Pro 7.0 and the MPEG-2 Playback and wanted to know if I download the new version 7.1 of Quicktime how that
-
Hi Frnds, I am trying to refresh the full cache, but during the process i am getting the following error for the adapter framework (af.vxp.vesssxip01) cache > CPA cache refresh (mode=full) successfully executed in 100392 milliseconds. Negative confir
-
Como instalar adobe cs6 despues de activar el numero de serie?
por favor me podrian decir como instalar adobe cs6 despues que ya me di de alta ya estoy regristrada y la compra tambien solo falta instalarlo en la computadora esa es la pregunta como lo hago? tengo que instalar los discos que vienen o como va eso?
-
Dataguard with EBSR12.1.1
Hi, We are planning to implement Dataguard with EBS R12.1.1 . what is the procedure. Regards, Muthu