Exit for transfer order creation

Hi friends,
In LT03 transaction
My requirment if when it is going from storage section to bin.
it should perform a check from a table.
so for that i need a exit or badi for that requirment.
can any body tell me how can i do that.
points will be awarded.
Regards,
kumar.

Hi,
For ur requirement to find BADI use the following procedure
To find the badi for a particular transaction goto TCode SE24 and give the class name as CL_EXITHANDLER and then display it. now double-click on GET_INSTANCE you will get some source code , put a break point on class name and give TCode on command field then debug .  double click on class name and go on pressing F5, you willl get list of BADI's and according to your requirement choose the right one.
Second procedure:
Go to SE84, Enhancements< Business-addin< definition(double click) and give package name of particular transaction then you will get BADI's. Read documentation by going to SE18 or SPRO and choose the right one according to your requirement

Similar Messages

  • What are the User Exits for Sales Order creation process?

    Hi,
    what are the User Exits for Sales Order creation process? how can I find them?
    thanks in advance,
    will reward,
    Mindaugas

    Please check this info:
    User Exits In Sales Document Processing
    This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
    Involved program components
    System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
    MV45ATZZ
    For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
    MV45AOZZ
    For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
    MV45AIZZ
    For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
    MV45AFZZ and MV45EFZ1
    For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
    User exits in the program MV45AFZZ
    The user exits which you can use for modifications in sales document processing are listed below.
    USEREXIT_DELETE_DOCUMENT
    This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
    For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
    The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
    USEREXIT_FIELD_MODIFICATION
    This user exit can be used to modify the attributes of the screen fields.
    To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
    The usage of the field groups (modification group 1-4) is as follows:
    Modification group 1: Automatic modification with transaction MFAW
    Modification group 2: It contains 'LOO' for step loop fields
    Modification group 3: For modifications which depend on check tables or on other fixed information
    Modification group 4: is not used
    The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
    This FORM routine is called up by the module FELDAUSWAHL.
    See the Screen Painter manual for further information on structuring the interface.
    USEREXIT_MOVE_FIELD_TO_VBAK
    Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBAP
    Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBEP
    Use this user exit to assign values to new fields at the level of the sales document schedule lines.
    The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBKD
    Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
    The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
    USEREXIT_NUMBER_RANGE
    Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
    The user exit is called up in the FORM routine BELEG_SICHERN.
    USEREXIT_PRICING_PREPARE_TKOMK
    Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
    USEREXIT_PRICING_PREPARE_TKOMP
    Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
    USEREXIT_READ_DOCUMENT
    You use this user exit if further additional tables are to be read when importing TA01 or TA02.
    The user exit is called up at the end of the FORM routine BELEG_LESEN.
    USEREXIT_SAVE_DOCUMENT
    Use this user exit to fill user-specific statistics update tables.
    The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
    Note
    If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
    USEREXIT_SAVE_DOCUMENT_PREPARE
    Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
    The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
    User exits in the program MV45AFZA
    USEREXIT_MOVE_FIELD_TO_KOMKD
    Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMPD
    Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMKG
    Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_MOVE_FIELD_TO_KOMPG
    Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_REFRESH_DOCUMENT
    With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
    For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
    The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
    The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
    User-Exits in program MV45AFZB
    USEREXIT_CHECK_XVBAP_FOR_DELET
    In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
    USEREXIT_CHECK_XVBEP_FOR_DELET
    In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
    USEREXIT_CHECK_VBAK
    This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
    USEREXIT_CHECK_VBAP
    This user exit can be used to carry out additional checks (e.g. for completion) at item level.
    USEREXIT_CHECK_VBKD
    The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
    USEREXIT_CHECK_VBEP
    This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
    USEREXIT_CHECK_VBSN
    You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
    USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
    USEREXIT_FILL_VBAP_FROM_HVBAP
    You can use this user exit to fill additional fields in the sub-item with data from the main item.
    USEREXIT_MOVE_FIELD_TO_TVCOM_H
    You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    USEREXIT_MOVE_FIELD_TO_TVCOM_I
    You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    User-Exits for product allocation:
    The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
    USEREXIT_MOVE_FIELD_TO_COBL
    Option to include new fields in structure COBL.
    USEREXIT_COBL_RECEIVE_VBAK
    Option to assign values from the document header to the new fields.
    USEREXIT_COBL_RECEIVE_VBAP
    Option to supply values from the item to the new fields.
    USEREXIT_COBL_SEND_ITEM
    A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
    USEREXIT_COBL_SEND_HEADER
    A changed field can be copied from the structure to the header (see source text MV45AFZB)
    USEREXIT_SOURCE_DETERMINATION
    You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
    USEREXIT_MOVE_FIELD_TO_ME_REQ
    With this user exit you can include additional fields for the following fields:
    EBAN (purchase requisition)
    EBKN (purchase requisition-account assignment)
    USEREXIT_GET_FIELD_FROM_SDCOM
    Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
    USEREXIT_MOVE_WORKAREA_TO_SDWA
    You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
    User-Exits for first data transfer:
    The following user exits can only be used for the first data transfer.
    Note
    Only use the user exits if the names/fields do NOT have the same name.
    USEREXIT_MOVE_FIELD_TO_VBAKKOM
    Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
    USEREXIT_MOVE_FIELD_TO_VBAPKOM
    Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
    USEREXIT_MOVE_FIELD_TO_VBEPKOM
    Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
    USEREXIT_MOVE_FIELD_TO_VBSN
    You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
    USEREXIT_MOVE_FIELD_TO_KOMKH
    You can use this user exit to include new fields for batch determination (document header).
    USEREXIT_MOVE_FIELD_TO_KOMPH
    You can use this user exit to include new fields for batch determination (document item).
    USEREXIT_CUST_MATERIAL_READ
    You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
    USEREXIT_NEW_PRICING_VBAP
    Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
    USEREXIT_NEW_PRICING_VBKD
    Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
    User-Exits in Program MV45AFZD
    USEREXIT_CONFIG_DATE_EXPLOSION
    The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
    User exits in the program FV45EFZ1
    USEREXIT_CHANGE_SALES_ORDER
    In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
    If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
    User-Exits in Program RV45PFZA
    USEREXIT_SET_STATUS_VBUK
    In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
    The following workareas are available for this user exit:
    VBUK (header status)
    FXVBUP (item status)
    FXVBUV (Incompletion)
    USEREXIT_SET_STATUS_VBUP
    In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
    The following workareas are available for this user exit:
    FXVBAP (Item data)
    FXVBAPF (Dynamic part of order item flow)
    FXVBUV (Incompletion)
    USEREXIT_STATUS_VBUK_INVOICE
    You can use this user exit to influence billing status at header level.
    User exits in the screens
    Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
    Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
    For field transports, you do not have to make changes or adjustments.
    Example
    A new field, VBAK-ZZKUN, should be included in table VBAK.
    If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
    User Exits in Program MV45AFZ4
    USEREXIT_MOVE_FIELD_TO_KOMK
    You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
    USEREXIT_MOVE_FIELD_TO_KOMP
    You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
    User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
    EXIT_SAPFV45P_001
    You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
    Regards
    Eswar

  • Exit for production order creation that update BOM explosion date

    Hi Guros
    does any one know a user exit for production order creation that update BOM explosion date = AUFLD.
    or a UE that run before the BOM explosion.
    thanks.

    Dear,
    I dont think user exist will work for you,
    You need to find BAdi for it, cl_exithandler=>get_class_name_by_interface .
    Or try with SE84,
    Enter the package name and check the " Enhancements"
    Regards,
    R.Brahmankar

  • FM or BAPI for Transfer Order creation in eWM

    Hello ALL,
    Please provide any FM or BAPI for Transfer Order creation in eWM. i know how to create transfer order in ERP.I tried to find out a FM or BAPI in SCM eWM but failes to get one.
    Kindly help.
    BR,
    Anil..

    Hi,
    Try using FM WS_LM_TRANSFER_ORDER_CREATE.
    I hope this is available in ur system
    Thanks

  • User exit at Transfer order creation

    i have a user exit named MWMTO001.
    it has been given like this will trigger at the end of the transfer order creation (Update task). wt i have done here is i activated the user-exit and when i try to create the TO its not getting stopped over the user-exit and here i didn't understand wt is mean by update task.
    regards,
    Mahesh.G

    Hi,
    How is it solved?
    I'm facing same problem, would you please advise?
    Regards

  • Problem with User exit for Purchase Order creation/change

    Hi Everyone,
    I have a requirement where I have to implement an enhancement for the standard transaction(ME21N/ME22N). I need to modify a particular field of the item table (EKPO) based on a few comparisons from the header values (After save of PO). I am using the enhancement MM06E005 and its corresponding exit  EXIT_SAPMM06E_013. While debugging I notice that the value is getting changed; but as soon as the control comes out of the FM, the change is not being reflected. Hoping to find a solution for this.
    Thanks & Regards,
    Indudhar P.G

    Hi Guys,
    Now I am using the BADI "ME_PROCESS_PO_CUST". But the control is not stopping at the method even though I set a breakpoint. It just saves the PO after I click save. Is this because my document type of PO is Stock Transfer Order. Can I use this BADI for STO's? and moreover how do I process each item line in this method. Does "ls_mepoitem = im_item->get_data( ).
    "  fetch all the item lines?
    Thanks and Regards,
    Indudhar P.G

  • User Exit for Transfer Order

    Hi,
    I have a requirement to set the TO for the following raison :
    After the visual check of confirmed production the user have to check the HU to be  automatically transferred  to the bin already assigned in advance (principally for the completed HU)
    The incomplete pallet will be transferred  manually 
    Please suggest me the correct user exit, where I can put in my code, for this enhancement.
    Thanks in advance.
    Olfa

    I am not sure about your requirements, but you can try these enhancements:
    MWMTO001 Enhancements for end of transfer order generation
    MWMTO003 Own stock placement strategy

  • Strategy for selecting Storage Unit for Transfer Order Creation

    Hi ppl,
    I need to understand what strategy is used by SAP to determine the storage unit while creating a transfer order for delivery using transaction LT03.
    It seems that the system selects the SU randomly, but, in the backend, there should be some strategy.
    Please let me know how to find this.
    Regards.

    Hi,
    Check the storage type indicator assignment value in the stock removal field  in the material master Warehouse management1 tab.
    Then go to SPRO->Logistics Execution ->Warehouse management->Strategies -> stock removal startegies. Check the stock removal strategies for the warehouse and storage type (from material master) data. From this data you can understand the details on system proposals.
    Regards

  • Exit for transfer order confirmation

    Hi ,
    I need an EXIT to extract the orginal transfer order number and its details once it was confirmed .
    if anybody knows the exit related to it provide me the same ,
    as it is veryurgent
    thanks

    Hi ,
    I need an EXIT to extract the orginal transfer order number and its details once it was confirmed .
    if anybody knows the exit related to it provide me the same ,
    as it is veryurgent
    thanks

  • Exits for sales order creation.

    Hi, SD gurus.
    In spite I've been searching for some help in previous posts, I've been unable to find what I'm really looking for... or at last, I did not understand the info properly.
    Anyway, it would be great if any of you could help me with an issue I've got. I have to implement two enhancements to the creating order process:
    First one, in the first screen -org.data, I've have to carry out a check of fields sales_org and sales_group.
    The second one, in the line-data, I've to carry out a checking over the material code to change it for its older one.
    So, if any of you could help me saying me which exact user-exits should I used, I'll give you as many points as possible.
    Thanks a lot and best regards.

    check this website
    search via Ctrl +F for sales org and material
    maybe you will find something
    http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
    http://sap.ittoolbox.com/documents/popular-q-and-a/debugging-a-user-exit-or-program-3022
    reward if helpful
    thanks
    kr
    hakan

  • User exit for sales order creation VA01.

    Hi friends,
    While creating Sales order, before saving the document, I need to check the Customer (Sold to pary?) details in KNEX table. KNEX-KUNNR  KNEX-TDOCO KNEX-DHRCO. if condition fails, I need to display an error message V1525,
    which should contain
    1)customer(sold-to -party?KNEX-KUNNR)
    2)partner function PARVW  (VBPA-PARVW?)
    3)country LNDEX KNEX-LNDEX
    Functional spec says, 1)V45A0002
                                  2)V45A0003
                                  3)V45S0001
                                  4)V50EPROP User exits can be levaraged.
    1)triggers before we enter customer (sold-to-party) in VA01. so may not be used.
    remaining i tried, but I am not able to get the proper PARVW, LNDEX from function module parameters / structures like VBAP/VBPA etc.
    Please help me the way.
    i) the above user exits can be used?if not, help me with user exit name.
    ii)if yes, how to fetch PARVW  , LNDEX, KUNNR...as all the primary keys must be used in the selection query.
    Please help me ASAP.

    Hi,
    Use this enhancement V45A0002.
    Reward points if it helps,
    Satish

  • User exit for transfer order confirmation

    Hi All,
    I need to display one error message in LT12 transaction when we select 'pick' and enter.
    Error message:'You are not authorised for this task'.
    I could not find suitable user exits or BADI  for this.
    If ayone is having idea on this,please help me.

    Hi,
    Chk the below badi's
    User-Exit in transaction LT12

  • User exit  for Transfer order (Ware House Managaement)

    Hai friends  I got a issue  in user exits.The isuue details as below,,,,,,,,,,,,
             When a material  with the same stock type is posted in the same bin, Capacity check is working, where as if the material with differnt stocktype are posted into same bin, Capacity check is not working.
    Issue deatils -    <b>max.bin.capacity -600kg.</b>
      capacity check method -3(check based on max.qty per bin in storage type).
       BINNO.      material             qty            stock type     
      01-01-01       mat1              600kg            Q
      01-01-01      mat1             100kg             Q   <b>capacity check is working</b> i.e  the sys. gives error msg as "Max bin capacity hasbeen exceeded by 100 kg.
    01-01-01       mat1              600kg            Unresticted
      01-01-01      mat1              400kg               Q   <b>capacity check is not working</b>
    Here, the system is posting into same bin with additional qty 400 kgs. it is not throwing any error msg. Here I suppose to get error msg.
    For this I found <b>EXit -EXIT_SAPLL2018_001</b> .
    <b>MWMBAP01 Enhancement for BAPI WarehouseTransOrder.GetDetail
    pls help me in this issue.pls suggest me in clearly.</b>bye.
    Prashanth.<b></b>

    Hi,
         You can try with user exit MWMBAP02
    <b>Reward points</b>
    Regards

  • Idoc for transfer order creation for outbound delivery

    Hi
    I am using idoc basic type WMTOID01 and message type WMTORD. when i am trying to create TO for delivery. the idoc is creating and TO ia also creating but, this is not linking to delivery. I am using mov type 601 and requirement type PICK and doc type L sales document. destination storage type 916 but when u see the TO i am not getting the delivery number is not appearing in TO and if you see the document flow in delivery the TO which is created is not appearing in document flow. please help to get the solution

    Some corrections
    Hi,
    Please check the delivery which you are creating is for WM managed storage location or not.
    If your configuration is in place & you are creating delivery & picking from WM managed storage location then TO will be seen in document flow. Either you create TO automatically or manually, in delivery document flow system will show TO number. Also in TO you will see destination bin as delivery number. (Dynamic bin)
    Hope this helps you.
    Regards,
    Prashant

  • Error Handling for Background/Update Tasks (Transfer Order creation) - How?

    Hi,
    I have a standard process for creating a Transfer Order and 2 user-exits that I have implemented.
    The user exits are used to transfer information during Transfer Order creation.
    However, the user-exits also check data in table TVARV and other. As such, error handling needs to be implemented, since the T.O. might or might not go through, depending on data validation and related.
    However, the user-exits are implemented during creation, which is an update task that runs in the background. This makes it impossible to output any information or error messages.
    What else can be done in regards to outputting a message, since the user will need to see some sort of message that the process failed, that the T.O. didnu2019t confirm?  Can an SAP inbox message be created and how?
    Please help.
    Thank You,
    John

    Hi,
         Please check the following link for all the function modules and user exits on TOs.
    http://help.sap.com/saphelp_erp2005/helpdata/EN/c6/f83a294afa11d182b90000e829fbfe/content.htm
    Reward points if it was helpful.
    Regards
    Abhishek
    Edited by: Abhishek Raj on May 29, 2008 10:20 AM

Maybe you are looking for

  • Adobe form -- Issue in Displaying Dynamic text along with Static text

    Hi All, I am having an issue when i am displaying a dynamic text along with static text in adobeforms. The dynamic text is slightly coming down and not aligned with the static text. i can see half row it is coming down. how to align both texts to be

  • I need to recover everything from my itouch to my computer

    Can someone help!!! I need to recover everything from my itouch to my computer

  • Viewing Russian and Greek in Safari

    Dear Common Wisdom: Why can't I view some Russian and Greek texts in Safari? Here is an example: image> http://www.psaltiki.net/Picture-1.png live site> http://www.psaltiki.net/ru/index_ru.html Kostas Aegina Isalnd, Hellas [email protected]

  • CREATING SYSTEM AND SYSAUX FILES

    Hi, when creating DB by script, can we choose to have them in AUTOEXTEND OFF or ON like this : SYSAUX DATAFILE '/d12/ORA_DB/SYSAUX_001.dbf' SIZE 350M EXTENT MANAGEMENT LOCAL AUTOEXTEND OFF DATAFILE '/d12/ORA_DB/SYSTEM_001.dbf' SIZE 100M EXTENT MANAGE

  • HOw to generate edifact document

    Hi all, I have a requirement where i need to generate edifact document . Can someone tell me how to create this edifact document. Can it be done throught abap coding or is there any specific transation for that.