Exit for variable in input-ready query don't get on step 3

Hi all,
for the validation of my variable (Characteristics) the user-exit should
stop at step '3' and deliver the content of the variable for validation.
The exit only get to step '1'.
*& I_STEP = 3
*& Der dritte Step wird im Gegensatz zu den ersten beiden Schritten
*& nicht pro Variable aufgerufen, sondern nur einmal insgesamt.
*& Dabei bekommt man sämtliche Variableninhalte übergeben, um diese
*& zu validieren.
please could you help me
thanks
Jörg

Hi Jörg,
As mentioned, I_STEP = 3 is processed once per query, not once per varaiable.
If this statement is placed within case-endcase for I_VNAM it never will be processed.
Please take a look on this, it might be helpful..
Regards
Joe

Similar Messages

Can we display comments row for row in Input Ready Query...

Dear All,
Currently I have created Web template with Signle Document. When executed it in the Portal it will come up with a "Save" and "Cancel" button of its own and can allowing me to capture comment here & Finally Click on SAVE button which was stored in Documents area in RSA1.
Now I am was trying to figure out to display comments Row for Row in Input Ready Query...
Can you give ideas on this...

Check link http://help.sap.com/saphelp_nw04/helpdata/en/1e/99ea3bd7896f58e10000000a11402f/frameset.htm
In query properties in BEx query designer you have to do settings to - Display document links
For metadata, master data, and InfoProvider data for a query, you can display links to Documents that you have created for these objects. If documents exist for these objects, the symbol appears next to these objects. If you click on this symbol, you jump to where the document is displayed on the Web.
Highlight the appropriate setting so that the document links for the desired document class are displayed. The document classes are oriented to the various categories of BW objects. InfoProvider data, metadata and master data.

Query with user-exit hierarchy variable and input ready hierarchy node var.

Hello everyone.
we are using several hierarchies (2005, 2006 and 2007) of the same info object 0FUNDS_CTR (one for each fiscal year). We would like to be able to use same reports regardless of chosen fiscal year (selected hierarchy) and ever more, to select node inside proper hierarchy. At the moment reports use 3 parameters:
1) fiscal period from - fiscal period to
2) hierarchy name
3) hierarchy node
Our goal is to get report with only 2 parameters:
1) fiscal period from - fiscal period to
2) hierarchy node
since hierarchy name could be derived (user exit) from fiscal period.
When user selects hierarchy node he is being asked to select hierarchy name (despite of user exit for hierarchy name) and key date (populated with current date).
We would like to avoid step of user selecting hierarchy. Is it possible?
Any other approaches to problem would be appreciated.
Kind regards,
Josko.

Hi Jörg,
As mentioned, I_STEP = 3 is processed once per query, not once per varaiable.
If this statement is placed within case-endcase for I_VNAM it never will be processed.
Please take a look on this, it might be helpful..
Regards
Joe

How to get Input-Ready Cell Value of Input Ready Query?

Hi,
How to get input ready cell value in fox formula?
for example :
In Input-Ready Query,
C_Code Month Psale(input ready)
1000 05.2012 800
now i want Psale 800 in fox formua before value save in cube,
is it possible?
Thanks
Ravi

Hi,
as I understand your requirement: you want to execute a planning function before 'save'. This possible, cf. note 1356805
for more details.
Regards,
Gregor

Input Ready Query, Variable read mode setting Only Values for InfoProvider

Hi,
I have a problem with Selection Variable for a BEx Query :
- I'm working with SAP BI 7.0 support package 15
- My query is an input ready query built for an "aggregation level" based on "real time infocube" (Planning);
- Characteristic, I want to filter with variable, has query property Advanced->Query Execution for Filter Value Selection = Only Values in InfoProvider
- Characteristic (info-object) has set the property: Business Explorer tab--> Query Def. Filter Value Selection as Only Values in the info-provider...
My problem is:
when I execute a query,
the Select Values for Variables screen appears
I push on the Select from List button
and Select Values For MyCharacteristic appears...
but it shows me all values in master data table of my characteristic instead of only values in the infoprovider!!!
If I build a query for the Real Time Cube it works correctly, but if the query is built for the aggregation level it doesn't work!
Could someone explain me why it doesn't work correctly?
Thanks in advanced
Fede

Thanks to Mariana Lazar
30.03.2009 - 12:30:36 CET - Risposta by SAP
Dear Fede,
Regarding the query built on aggregation level please note the following
the aggregation level is always a Virtual Provider built other
InfoProvider and hence it does not have the dimension table and hence
the F4 mode D is not supported.
Therefore when aggregation level is used in a query, F4 does not supportD-mode: 'Only Values in InfoProvider' and all master data values are
displayed in the value list.
Reference from the note
984229 F4 modes for input help as of SAP NetWeaver 2004s BI
4. Since other InfoProviders do not have a dimension table, the system
displays only posted values if you select "Only Posted Values for
Navigation". Otherwise, it displays the values from the master data
table.
Hope this should clarify your doubts. Please let me know if you have
questions else please confirm the message at your earliest convenience.
Thank you for your cooperation and kind regards,
@KR@ Mariana Lazar
Senior Support Consultant
SAP Active Global Support
Netweaver Business Warehouse

Copy Input Ready Query Variables into Planning Sequence

Hi all,
       We have the following scenario. We developed a model using Web Template. The model has an input ready query and a Panning sequence associated with it. Both of them using the same Planning Filter that has a input variable for Profit Center (say ZPCTR). If I run this model in Portal the planning sequence automatically takes the variable given for the input ready query and the sequence runs without any problem.
       We were asked to implement the same model in BEx as the users felt more comfortable using Excel when working on this model. When we assinged the planning sequence to a button and after we run the input ready query and then click on the button to run the planning sequence, we get an error message saying "You have to enter values before you execute". The Planning sequence is not taking the values we enter for the input ready query automatically.
      I read through the forums on the same issue and saw that most of them reported about the same but could not find a conclusive answer. I tried the following options.
1) Enter the expected values in the excel in one location and gave the address in the "Command Range" of the planning sequence. Still it does not work.
2) Tried SAP suggested method as given in http://help.sap.com/saphelp_nw70/helpdata/en/45/e301089d574a88e10000000a155369/frameset.htm It also does not work
3) Couple of them suggested to use a different variable for Profit Center in the filter of Planning sequence (say ZPCTR_EXIT) and populate this variable. I wrote an exit for this variable and populated a fixed value say '100' into it. The sequence runs as expected. But I do not want use a constant, I want to store the value entered in ZPCTR into ZPCTR_EXIT.
   when I use the regular logic "LOOP AT i_t_var_range INTO var_inpiut WHERE vnam = 'ZPCTR' ", it does not work. the exit variable works if I store some constant values, not variable values.
    Can you please suggest how can I work with this. Is there any table from which I can read the profit center value the users enters into the Exit variable.
Thanks for your time,
Ram.

This error generally comes when we use some user input variable in the sequence which is not restricted in the query. Even though you are using the same filter for both planning sequence and query, check the planning functions inside the sequence which might read an user input variable which is not available in the query so that it is not appearing in the query selection screen. Like in FOX reading a variable using VARV or a variable restricted in the field for condition of planning function etc. Make sure that all the variables used in the sequence (planning functions) are kept in query restrictions if they are of type ready for user input so that they will appear in the selection screen.

Wrong cache for input-ready query

Dear Expert,
I encountered some issues about input-ready query. When I first open one input-ready query and input some plan data, I can save the data successfully. But after I saved data for the first query, if I don't re-connect the analyzer and open a new query, usually the plan data in the new query can not be saved successfully. After re-connect the analyzer, it works well. When I debug it, if I do not re-connect analyzer, I found the new query I opened still got some data which belong to the first query (Such as variable value). I guess it probably caused by some Bex cache? (It's not OLAP cache in RSCACHE, as we have disabled the cache for planning query in RSRT).
Could you please help me with this? Is there any way we can disable this kind of cache for the input-ready query? Or if we have any solution to clear this kind of cache without re-connect bex analyzer every time when I open a new input-ready query.
Thank you in advance.
Best Regards,
Fuyang

Hi Fuyang,
We are facing similar problem.
1st problem:
(1) When we run workbook that time variable values are automatically filled up.
(2) Variable values for version, year is filled up and then query output is displaying.
(3) There is no personalization or variant used. Its looks to me Values are coming from Cache.
(4) Cleared RSRCACHE and there is no cache used for this query.
(5) If we enter version = u201CZ2010u201D and Year = u201C2010u201D and after running workbook (input query) and then closing and reopening same variable values are coming. If we change version from u201CZ2010u201D to u201CZ2011u201D and run/save query and again reopening version variable values are coming again to u201CZ2010u201D.
2nd problem:
(1) We have planning sequence which is using below variables.
(2) Version, Year, Plant.
(3) Version and Year is input ready variables
(4) Plant is Userexit variable.
(5) Plant Dropdown is used.
(6)When we execute planning sequence first time without filtering plant then it is working fine. Receiving message u201C100 records read,100 records changedu201D u2013 This is working fine.
(7) When we use plant dropdown and filtering u201CABCu201D plant then planning sequence working fine and receiving message u201C20 records read, 20 records changedu201D u2013 This is working fine.
(8)When we clear drop down/filter using CMD - REMOVE FILTER which is used in button clear plant u201CABCu201D filter. u2013 This is working fine.
(9) Then we again apply planning sequence for all the records and receiving message u201C20 records read, 20 records changedu201D. This is not working. The message should come u201C100 records read,100 records changedu201D
This time plant variable has still with value u201CABCu201D and not clearing in variable cache.
We are on below BI 7 level and above application is Excel based.
SAP_ABA u2013 701-SAPKA70104
SAP_BASIS-701-SAPKB70104
SAP_BW-701-SAPKW70104
BI_CONT-701-SAPK-70403INBICONT
SAP GUI 7.1 patch 17
SAP BI BEx AddOn 7.1 patch 10 (1000)
Any help will be greatly appreciated.
Thanks in advance.

Input-ready query; Layout dependant on variable value

Hello,
I need to create an input-ready query where I have months Jan-Dec in colums. If the planner gives a variable value for the planning period for example April, he should get a layout where he can plan for April-Dec and view the values for Jan-March. How can I create this kind of input-ready-query? Thanks in advance. Points will be assigned.
Regards,
Marika

Hi Marika,
Step1: You need to create a variable (with user restriction), you can provide fixed values for all months of the year, perhaps on 0CALMONTH. You will get the text displayed when you select the month number in the planning folder where u use it. Say WM1 is the name you gave.
Step2: Create 2 exit variables. 1st one would check the entry by the user from WM1. If the period is > January, store all the months starting from January to the month preceeding to one selected in WM1. Set this as WM2.
In the second exit variable, the code must check for which month user has selected to start planning from and store all months starting from and ending December in it. Set this as WM3. You will have to create these 2 variables on 0CALMONTH again.
Step3: Now, in the Layout builder, 1st screen, for the additional settings, in the data columns tab, select 0CALMONTH for dynamic.
Step4: In the second screen of Layout builder, create 2 rows for the data column settings. First row would be set for comparison. Check dynamic box. Assign WM2 as the variable for 0CALMONTH here.
Second row would be for planning, but check dynamic box here again and assign WM3 as the variable for 0CALMONTH here.
You must be having WM1 as the variable in header.
In the 3rd screen you will find just 2 data columns displayed.
When you run the layout, user prompt will insist you input the desired month and layout on further opening, will bring in the desired data as you require from the Cube.
I hope you have ur actuals and plan data both in the same cube. Else you have to assign separate cubes for plng area in comparison and plan settings in the 2nd screen of builder.
Hope this will help solve ur problem.
Regards,
Aby

How to calculate and save planning data in bex input-ready query using keyfigures for calculation from different infoproviders

Hi Dear All,
We have two real time infocubes and two aggregation levels based on these cubes in one multiprovider
first cube1 is like
char1| char2| keyfig_coefficient(single value for each combination of char1 and char2)
same aggregation level1
(we have input query to fill coefficients by one responsible user)
second cube2 is like
char1| char2| keyfig_quantity| keyfig_result
same aggregation level2
Input ready query should be like (for all other users of different org units)
char1|char2|keyfig_coeff| keyfig_quant(for input) | keyfig_result = keyfig_coeff*keyfig_quant(calculated value, should be saved to cube2)
And we don't have pregenerated lines in cube2, users have to add new lines themselves by wad.
Question is, what is the optimal (easiest) way to make calculation and save result data to cube2 where keyfigures for calculation should be used from different infoproviders. I need just a hint.
Appreciate any help.
Nadya.

I found decision, agregation levels sould be based on multiprovider, not included.

How to find out query name in customer exit for variables

We use the same customer exit variable in different queries. In the customer exit we want to find out, which query has called the customer exit. With the technical query name we want to read a master data table entry.
e.g. If we come from query ZG1_TEST1 we want to use selection sel1
Query name | selection
ZG1_TEST1 | sel1
ZG1_TEST2 | sel2
How can we find out the query name in the customer exit for variables?
Thanks for your help,
Evi

Hi Evi,
check out the structure I_S_RKB1D in your exit. It contains the query.
Siggi

Restriction data entry for input ready query

Dear All,
I have an input ready query with two structures for rows and columns.
However, I have set one of columns' structure's member as "data can be changed with planning functions", i'm able to enter data for that column. When i execute save function, entered valus are being disapperaed.(not benig written to the cube)
But i want to restrict data entrance for that column. (Like display functionality in BPS)
I know i can protect fields with excel functionality, but we are using web environment.
How can i resolve mentioned issue?
Thanks
Alkan

Hi Bindu,
Thanks for your quich answer.
In web environment, i think i need to use WEB API.
Do i need to write java script? Or is there any particular class to manage the properties of the cells?
BR
Alkan

Chars in columns for Input Ready query

Hi
Hope every body is just doing fine. I am puzzled with following doubt when compare BPS layout builder to IP input ready report. Please help me to clear some smoke here.
We have a simple input ready query to enter some values in the key figure for given combination of characteristics for 12 fiscal year periods in the year.
BPS >>> In BPS manual planning layout we would have selected the Key figure and Fiscal Year Period in data column and profit center and Plan Year in Header and Other characteristics like GL account,cost center in lead column so that we can hide the Fiscal year period by restricting the values of key figure for particular fiscal year period value while creating columns in Data columns like Jan 07. etc
IP>>> So in IP, I have fiscal year period in aggregation level with all other chars and key figure. In input ready report, I have used the structure to pull the key figure and fiscal year period value to come up with column and not included the key figure in rows or columns of report but when I was executing the query system is automatically including the fiscal year period as free char. I am puzzled on how this is going to work. Is fiscal year period not populated automatically based on column.
Your inputs are highly appreciated with point.
Thanks,
Raj.

Hi Raj,
Experiencing similar problems. Which GUI are you on ?
thanks
Ian

Input ready query on Multiprovider displays two row for two Infoproviders

Hello experts,
We are using below design to develop an input ready query.
                   Input ready query
                       Multiprovider
Aggregation level 1      Aggegation level 2
Realtime cube 1            Real time cube 2
As we are developing Input ready query on multiprovider, it is automatically creating characteristic named 0INFOPROV at multiprovider and query level. 0INFOPROV contains values of Infoproviders on which multiprovider is created.
char1 cha2 Infoprovider                    key1     Key2
R1       #       Aggregation level 1        10          #
        P1     Aggregation level 2         #              20
During planning, we have to plan on separate row for each infoprovider.
is there any way we can avoid this issue and perform planning on single row for both infoproviders?
Thanks,
Mitesh

Hi,
Please refer following document.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70dcd7b5-6a3d-2d10-c984-e835e37071a2?QuickLink=index&overridelayout=true|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70dcd7b5-6a3d-2d10-c984-e835e37071a2?QuickLink=index&overridelayout=true]
This Documents gives step by step procedure to combine thw rows with # iand with char value nto a single row.
Regards,
Geetanjali

How to implement the input help at web for the input ready query?

Dear all,
As you konw when we create the input ready query for Planning, we can insert the new record for plan with Analyzer tool. We also can use input help(double clike the space) for input the master data.
I want to konw when I use Web Appliaction Designer to run the query at the web, How can I use the input help for planning data.
My customer request me must implement the input help function at web.
Thanks a lot
best regards,
Leon
Message was edited by: Leon Wang
Message was edited by: Leon Wang

Hello,
It seems Input Help is not possible with WEB.
Check out the link below -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/f234619e3c4c5de10000000a155369/frameset.htm<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/f234619e3c4c5de10000000a155369/frameset.htm">Input Help - with Web application designer</a>
<b>Bex Analyzer -</b> You access input help for a cell by double clicking on it or choosing the F4 button.
<b>Web Appln Designer</b> - Input help is not available
Hope it Helps
Chetan
@CP..

WAD template for INPUT READY Query

Gurus,
I have created a real time cube and did al steps correctly in terms of Input ready Query Design. ( Set the Query to Change Mode , changed Key figures to accept Data from Users and Plan functions).
I get the out put in read only mode . I mean the key figures does not allow me to plan .
I am clueless as I seem to do all correclty. We are on latest Service pack .
I discovered we are uisng the webtemplate 0ANALYSIS_PATTERN . DOes this need to be changed?
ANy suggestions please ....

Hi,
Suggest check if you are able to enter data using the input enabled query in BEx just to make sure that the query is correctly developed.

Exit for variable in input-ready query don't get on step 3

Similar Messages

Maybe you are looking for