Exit from ITS screen.

Hello Friends,
I am call some ITS screen from my webdynpro application and the ITS application are also landing successfully. But now i can see so many tool bar button in the ITS which i dont want . I want only two button CALCEL and EXIT . And once the user click on the exit button the ITS window is close autometically .
Is there any way to do this two requirements.
Thanks,
Satya

Hi Satya,
The following ITS WIKI covers all your requirements here:
[Article - Employ SAP GUI for HTML instead of an Internet service|http://wiki.sdn.sap.com/wiki/x/i50]
See also notes:
[1010519 SAP GUI for HTML: Simplified Title Area Without Menu and OK Code|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1010519]
and
[959417 Integrated ITS, Closing Session When Transaction Ends|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=959417]
Regards,
Oisin

Similar Messages

How can I exit from full-screen View?

On the View menu, I clicked "Full screen View", but then I couldn't find any way back to normal view. I had to Force-Quit Firefox to escape.
How do you exit from Full Screen View?
(I tried Esc, Ctrl-C, and many other key combinations)
Thanks, PeterR

Try F11.

How to exit from popup screen

Hi,
Please give me guidence for below problem.
I have report and when it executes ALV is displyaed and in the alv if the user select the push button one popup will be displayed.In the popup two pushbuttons and if the user select CANCEL the popup should be cancelled and it must show the alv ouptu(previuos one).If i have tried with LEAVE program then it is coming out from program but i want ALV output.I have tested with LEAVE TO SCREEN 0 , and LEAVE TO LIST PROCESSING but no use.
Thanks and regards,
shyla

HI,
U HAVE A PROBLEM WITH PUSHBUTTON
FOR THE ""CANCEL "" BUTTON
LEAVE TO SCREEN/PROGRAM IS GOING TO DO WHAT U WANT
ONCE U CHECK THE ATRIBUTES OF CANCEL BUTTON IN LINE EDITOR
THERE SOME FIELD CALLED ""FUNCTYPE""
BUT IT SHOULD BE GIVEN VALUE "" E""
IT HAS OPTIONS LIKE E,SPACE,,,,, ETC
USE THAT & CHECK IT ONCE IT WIL WORK

Organizer jumps to first picture in well after exit from Full Screen viewer

I'm using PSE 11, and noticed that I'm losing my place in the well after using the Full Screen viewer (F11). For example, if I have 300 pictures in the well, and am halfway through them on picture 150, and I select a few pictures to view Full Screen then press ESC or Exit button to go back, the organizer takes me to the top of the well, with the first picture highlighted. I have to scroll down to find where I was. Is there a way to avoid this?

The problem mentioned above still seems to be present in PSE13. I find this so frustrating that I am considering abandoning the organizer in spite of having 14000 organised and tagged photos in my catalog. SURELY there must be a fix to this problem!

Mouse back/forward buttons don't respond after exiting from full screen Flash video

Yeah. Has anyone else encountered this? After viewing a full
screen video (YouTube, Hulu) and exiting (via the ESC button), the
back and foward buttons on my mouse stop responding. Really!
Usually I will have to go back into a full-screen video twice for
the buttons to get "stuck," and then it takes them several minutes
to regain their functionality.
I've had this going on for over a year now, and I'm finally
sick of it enough to where I want to get some help. I've narrowed
it down to the Flash player as being the culprit, and it happens on
every browser I've tried it on (Firefox 3: RC2, RC1, Beta5; Firefox
2; IE7; IE6; Safari 3.x). This started happening when I upgraded
the Flash Player and the first offending version would be the one
that introduced the current full screen Flash video technology. I'm
guessing it was 9.0.
I have a Logitech MediaPlay wireless mouse, Win XP SP2. I
have the latest version of Flash and the most up-to-date mouse
drivers.

I have the same exact problem, only a different model
Logitech. Have you found a solution? Thanks, Shawn.
[email protected]

Automatically exit from fullscreen mode when silveright player section or any buttom from control strip click in fullscreen mode.

I have implement an full screen functionality using javascript fullscript api to show page contain in full screen mode and that page have three type of content
a.)smf player xap
b.)dfp ads
c.)social media plugin
that full screen functionality is work perfectly in chrome browser but when I use the mozila browser it create problem during fullscreen mode when any user click on any area of smf player.
For example if i click on fulls screen button that page easily open in full screen mode but if user click on any part contain by the xap contain it automatically exit from full screen mode like if any user click on play button during full scree mode it automatically exit from full screen.

In order to uninstall a possibly unwanted extension, please do the following:
#From the Firefox window click the Firefox button at the top left and select ''Add-ons'', or, if the Firefox button is not shown, click the ''Tools'' menu and click ''Add-ons''.
#Once the Add-on Manager has opened in a new tab, click the ''Extensions'' button on the left side of the window.
#You should now see a list of your installed extensions on the right side together with buttons on the right side of each extension.
#To remove an extension from Firefox, simply click the ''Remove'' button. You should see a message that informs you about the successful removal of the add-on.
#Note that some add-ons require a Firefox restart to be removed completely. To perform a Firefox restart after the add-on removal, click the ''Restart now'' link in the message.
You can find further information about uninstalling extensions in the following articles:
[[Disable or remove Add-ons]]
[[Remove a toolbar that has taken over your Firefox search or home page]]

Exit from window mgr locks computer

I have installed xorg many times with the jwm window manager without problems until now. I did my first Arch install, a couple days ago, with no problems. Now, my second arch install on another computer, has me confused.
Xorg and jwm run okay, and will launch an application. Exiting the application returns control to jwm. Wnen exiting from jwm, screen goes blank and there is no response to keyboard or mouse. i must turn power off and reboot.
My .xinitrc file (as usual):
#!/bin/sh
#/.xinitrc
jwm
I know I screwed up somewhere doing the install, but can't figure it out. Any help is appreciated
Editing - I think the answer is: just re-do the install.
Last edited by Ron74 (2010-01-24 06:42:39)

I have installed xorg many times with the jwm window manager without problems until now. I did my first Arch install, a couple days ago, with no problems. Now, my second arch install on another computer, has me confused.
Xorg and jwm run okay, and will launch an application. Exiting the application returns control to jwm. Wnen exiting from jwm, screen goes blank and there is no response to keyboard or mouse. i must turn power off and reboot.
My .xinitrc file (as usual):
#!/bin/sh
#/.xinitrc
jwm
I know I screwed up somewhere doing the install, but can't figure it out. Any help is appreciated
Editing - I think the answer is: just re-do the install.
Last edited by Ron74 (2010-01-24 06:42:39)

Accessing the Logon User Exit from the Internet using an ITS Service

I can access the Logon User Exit (EXIT_SAPLSUSF_001) from R/3, but not from the Web using an ITS service. What am I missing in order to access the Logon User Exit from the Web. The ITS service was created from an ABAP screen program.
Thanks
david yee

The SAPGui logon exit is called after successfull authentication has been completed and after a SAPGui session has been attached.
If you logon via RFC, WebGui, ICM or the Wgate then this exit does not trigger.
What are you wanting to add to your code after the logon ?
An solution I have used is to create a wrapper RFC for a BAPI and create a webservice for the wrapper. Before calling the BAPI you can do whatever you want to from a security perspective.
But for that you need to have an appropriate BAPI...
Please explain what you want to do and what you would have wanted in the exit. Often there is a better way.
Cheers,
Julius
ps: I moved this to the security forum.

I have Iphone 4s that is on warranty but its screen has stopped working when i peek in with a external light it shows iphone disabled. and can not restore from i tunes as well. i am in pakistan and phone was bought from Canada. how can i get assistance?

hello can apple help me out.i am from Pakistan, i received iphone 4s as a gift, it was purchased in canada last march 2012. unfortunately its screen stopped working and inside screen when i try to look with external light. there was message "iphone disabled for 60 minutes" i tried restore but could not it downloads update but does not do anything i am heck upset its really something means to me alot. I tried to find out warranty claiming process but here in pakistan it has not been officially launched. Why so ? in a country where 50% people are using iphone and apple is not there? i was really shoked. well i really need help.please guide me how can i get it replaced or anything that can be claimed in warranty.it is still on warranty. But i am in pakistan where i can not find any istore where they deal with warranty. Please guide me i have studied alot and have read stories about people having same experience and apple helped them alot. I am amazed that i been giving marketing presentations on a brand which is not in my country but heared much "good" about you. and was having great experience of your device. Please dont make it true what i have heared about you.
Regards.

Try restoring the iPhone to factory settings. If you are having difficult restoring, put the iPhone into Recovery Mode and see if that then works:
http://support.apple.com/kb/ht1808
If not, or if a restore to factory settings does not fix the problem, then your iPhone may have a hardware problem. You can only get the iPhone serviced by Apple in Canada, so you will have to take the iPhone there or send it to someone you know in Canada who can get the iPhone serviced and send it back to you. The only option for getting service in Pakistan would be to pay some unauthorized repair shop to attempt a repair, after which Apple will no longer provide any service even in Canada.
Regards.

How to launch an ITS screen from an ABAP WebDynpro Button Action

Hello All,
I have a requirement to launch an ITS Screen from ABAP WebDynpro. There will be abutton on the WebDynpro screen and when the user will click on that button, the ITS Screen will be launched.
Can anyone please provide us some sample applications or sample code to achieve the above functionality.
Points will be rewarded.
Thanks
Shyam

Hi Shyam,
You can achieve by using Launchpad Customizing and the Launchpad Navigation API's. Just make and entry on transaction LPD_CUST, create a launchpad role, add you target application there.
At run time under the UI button you can call the API provided by CL_APB_LAUNCHPAD_API -->LAUNCH_APPLICATION to open the application. You can find many material on Internet for the same, with examples, even try some where-use in your system.
I found one more helpful link.
http://sapignite.com/call-sap-tcode-using-webdynpro-for-abap/
Regards
Vineet

Regarding exit from the module pool screen

h experts,
i have developed a module pool report in which in the selection screen i have four fields which are mandatory ,when i execute the program without entering in the selection screen it do not allow to come out of the module pool screen ...what i want that without entering any input in the selection screen if i press exit button push button it will allow to come out of the screen for this what sud i do plz help me....

Hi
keep a button called EXIT on the screen
Make the function type of that field as E
in Flow logic write
PROCESS AFTER INPUT.
Forced Exit from the transaction from screen
MODULE exit AT EXIT-COMMAND.
double click on exit module and
then in PAI write
*& Module exit INPUT
Exit from the Transaction
MODULE exit INPUT.
CASE okcode.
 WHEN 'EXIT' OR 'CANCEL'.
 CLEAR okcode.
 LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " exit INPUT
Reward points for useful Answers
Regards
Anji

R/3 User Exit Call from ITS

Hi ,
In an user exit i want to find out if a call has been made from ITS ..
is there any FM or system variable set.. based on which I could find out ?

call function 'ITS_PING'
       exceptions
            its_not_available = 1
            others            = 2.
if sy-subrc eq 0 .
******* called from ITS
else .
**** not called from ITS
endif .
Raja

HT1349 Actually, my iphone was hanged and its screen was not working at all .So, I updated its software from market but for reactivation it require icloud account but i didn't know how exactly it is and i was caught in big trouble . But i have its box and

Actually, my iphone was hanged and its screen was not working at all .So, I updated its software from market but for reactivation it require icloud account but i didn't know how exactly it is and i was caught in big trouble . But i have its box and all other accessories .So , kindly help me as early as possible .Thankyou and tell me about its solution
<Email Edited by Host>

Basic troubleshooting steps outline in the manual are restart, reset, restore from backup, restore as new. Try each of these in order until the problem is resolved. If you've been through all these steps and the trouble persists, you'll need to bring your phone to Apple for evaluation. Be sure to make an appointment first at the Genius Bar so you won't have a long wait.
Best
GDG

I can no more connect my Ipod to Itune, when it proposed a new update of the software I accepted, from then my I pod is not recognisez by my PC and I have the Itune in its screen

I can no more connect my Ipod to Itune, when it proposed a new update of the software I accepted, from then my I pod is not recognisez by my PC and I have the Itune in its screen.

Hi,
Try placing your iPod in Recovery Mode and restoring it via iTunes: http://support.apple.com/kb/HT1808.
Hope this helps!
---likeabird---

Screen displaced from its actual position

my blackberry z3 screen was displaced from its actual position and was shifted slightly downward. kindly sugest me, how to get my screen back to its actual position.

Which os version running in your z3?

Exit from ITS screen.

Similar Messages

Maybe you are looking for