Exit in ME21N for change field
Hi everyone,
i'm looking for an exit or BADI in ME21N that allows me to change a specific value in table eket.
The idea is that after the SAVE, the field EINDT of EKET must be changed.
I had aldready tried to use some exits, but not even one worked.
Here's the list i tried:
EXIT_SAPMM06E_006
EXIT_SAPMM06E_007
EXIT_SAPMM06E_008
EXIT_SAPMM06E_009
EXIT_SAPMM06E_012
EXIT_SAPMM06E_013
EXIT_SAPMM06E_014
EXIT_SAPMM06E_016
EXIT_SAPMM06E_017
EXIT_SAPMM06E_018
Can anyone help me please?
Best regards,
Pedro
Message was edited by:
Pedro Rosa
Message was edited by:
Pedro Rosa
Hello Arif Mansuri ,
i have a question about your reply.
I'm not looking for BAPI for creating and changing PO, but a BADI or exit to use in ME21N that is able to change the content of a field, in this case eket-eind.
You are saying that exist's a BADI for that purpose related to BUS2012 ? What's the name for the BADI?
I have aldready tried WVLB_BADI_WLB13_EXT.
Best regards,
Pedro
Similar Messages
-
User-Exit or BADI for USER FIELD in C201 or C202
Dear Experts,
SAP has made provision of USER FIELDs in C201 / C202 (Create/Change Master Recipe: Operation), which is saved in PLPO table.
By applying logic, for each operation I want to create a Phantom part and update values in this user fields at the time of SAVE.
Is there any BADIs, User-Exit or any standard way available which is called at the time of Recipe Create / Change?
Or Should i go through Implicit Enhancement for the same?
With Regards,
Kaushik SavaliyaHi Kaushik,
Please check these Function exits.
EXIT_SAPLCPDO_001 -PS: User fields
EXIT_SAPLCPDO_002 -PS: Customer specific fields in process (standard net)
EXIT_SAPLCPDO_003 -PS: Customer specific fields in process (standard net)
Hope it helps. -
User exit / substiution / badi for changing baseline date
Dear Experts ,
I have a requirement to change the base line date of residual document created in F-28 / F-32 to the base line date of original document getting partially cleared .
I have explored the option of substitution but it doesnt work as field ZBLDT is not available for substitution there .
Please let me know any BADI / Exit which can perform this change of baseline date .
thanks in advanceHi Milind,
Following are the user-exits for F-32 :
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment)
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
I hope this will help you.
Regards,
Nitin. -
Custom exit or badi for changing the user fields in operation of process order
Hi all
I want to find a exit or badi to set default value to the user fields in operation of process order when COR1.
I have tried exit 'PPCO0001', but this exit is call after commit work, so I can not change any thing
I also tried to use badi 'workorder_update', 'before_update', but all parameters in this BADI are importing, can't be changed, I've tried to change it and then program dump.
Do you have any solution for this question?
ThanksDo a Implicit Enhancement at the PBO of this subscreen.
-
USER EXIT or BADI for Vendor field in MIRO
Hi Experts,
In MIRO transaction vendor field gets defaulted from Purchase Order. So my requirement is to changes that vendor with alternate payee.
To <u>replace the vendor with alternate payee</u> I need the <b>USER EXIT or BADI</b>, kindly help me on this will be useful for us.
Thanks in Advance.
SAP ConsultantTransaction Code - MIGO Goods Movement
Exit Name Description
MBCF0002 Customer function exit: Segment text in material do
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_
MBCF0011 Read from RESB and RKPF for print list in MB26
MB_CF001 Customer Function Exit in the Case of Updating a Ma
No of Exits: 8
BAPI-step by step procedure
http://www.sapgenie.com/abap/bapi/example.htm
list of all BAPI's
http://www.planetsap.com/LIST_ALL_BAPIs.htm
Rewards if useful.................
Minal -
User Exit that triggers for Change operation
Hi All..
I want a user exit which triggers when I enter into an infotype(2001) from tcode PA30.
My actual requirement is to show the field REFNR in display mode.
By using the exit PBAS0001 exit0001 I can make the field REFNR in displaymode for create operation.
But in change operation of the infotype the exit is not getting triggered.
Regards,
Anji.chk these
Transaction Code - PA30 Maintain HR Master Data
Enhancement/ Business Add-in Description
Enhancement
PBASRP01 PA: User exit distributed reporting
PBAS0002 PA: Enhancements for Personnel Administration - Menu
PBAS0001 PA: Pers.Admin./Recruitment: Default values and checks
PARA0002 Enhancement for Calculating Annual Salary; IT0008,14,15
PARA0001 Enhancement for Determining the Number of Periods
HRRPAI01 User exit for FB HR_ENTRY_DATE and HR_LEAVING_DATE
HRPC0001 HR: PC download authorization
HRPBAS01 User Exit for HR Master Data
Business Add-in
HRPAD00_PREM Definition of User Exit for Collective Search Help PREM
HRPADUS_PBAS_0001 Customer Exit for Message handling
HRPAD_SUBTY_CHECK
HR_F4_GET_SUBTYPE HR: Entry help for subtypes
HR_FAST_ACTION_CHECK Check fields on the fast entry screen
HR_INDVAL HR: Indirect wage type valuation
HR_SET_PKGAB
HRPAD00_RECOG_SCREEN Employee - Recognition Screen
HRPAYXX_DELETE_PERNR BAdI for Reports Deleting Personnel Numbers
HRPAD00_PAPM Definition of User Exit for Collective Search Help PAPM
HRPAD00_GET_AF_0008 Additional Fields for Basic Pay Infotype (0008)
HRPAD00_ENTRY_LEAVE HR_ENTRY_DATE and HR_LEAVING_DATE
HRPAD00_ADRS HR: Address formatting
HRPAD00MGEACTIVATION Activation Action BAdI for Global Employees
HRPAD00INFTY Update / Infotype maintenance
HRPAD00AUTH_TIME Time Logic in the PA Authorization Check
HRPAD00AUTH_RECORD Spanish Data Privacy Law: Exit for Recording
HRPAD00AUTH_CHECK HR: Authorization Check
HRIV_REDUCE_AMOUNT Reduction within Indirect Valuation -
ME21N Fast Change-Field Addiition
Dear All,
In ME21N/ME22N, there is a Fast Change Icon at the item level after Copy Item Icon.
When clicked on it, we can see the hidden fields in it which are present in the structure
MEGUI_MASSCH_ALLOWED_FIELDS
Now I want to add one more field which is the WBS Element in this list of hdden fields.
So I added this field to MEGUI_MASSCH_ALLOWED_FIELDS structure by doing an Append Structure
But it is not making any difference.I cannot see WBS Element in that list of hidden fields.
Can anyone tell me how to meet this requirement
Rahul.Hi,
check the badis/exits available:
e.g.
MEGUI_LAYOUT
ME_GUI_PO_CUST
Best regards.
Edited by: Pablo Casamayor on Mar 24, 2009 9:18 AM -
Need a Exit or BADI For Changing Validation Class (PRUEFKL) during EL28
need to change the Validation Class Validation Class (PRUEFKL) or send it blank in order to remove all valdition during Meter read uplaod , Can any one suggest a BADI or user exit or anything where in i can change the Validtion class before validation take place at the time of meter read uplaod . As validtion class we do not pass in EL28 it usually get filled with 001 ans 002 .
Thanks in advance .
regards
rajeevThank for the response however my question was , can we change the Validation Class throght code any exit or BADI during el28 not by config as config will be done for every thing as this we need to do only for a paticlular program .
So in short i m looking for any enhancement point ( Exit /BADI ) which willl trigger during el28 and i will be able to send emply validation class in initial stage to avoide validation .
Regards
Rajeev
Edited by: rajeevkohli on Aug 3, 2011 2:25 PM -
User exit or Badi for changing the lead time in ATP check in VA01/VA02
Hi All,
Currently, SAP standard functionality takes up the lead times maintained in material master to create the schedule lines in the sales order in VA01. I am looking for some user exiit/Badi/Enhancement point where I can change the lead time. This is somewhat urgent so any help in this regard is appreciated.
Regards,
Sandeep
Edited by: Sandeep Gaitonde on Sep 1, 2011 9:16 PMHi Sandeep,
These are the user exits will trigger in va01 .
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Please check this and post .
Regards,
Madhu. -
User exit in VA01 for changing the status profile
Hi Experts,
I want a user-exit in VA01 wherein i can change the status profile (Screen field name = JOSTD-STSMA ) based on some logic.
Thanks in Advance:-
SantoshHi, Santhosh,
You can use function module "STATUS_PROFILE_CHANGE"
see the code,
CALL FUNCTION 'STATUS_PROFILE_CHANGE'
EXPORTING
OBJNR = XVBAK-OBJNR
STSMA = G_STATUS
NO_CHECK =
EXCEPTIONS
OBJECT_NOT_FOUND = 1
NO_STSMA_CHANGE_POSSIBLE = 2
STSMA_NOT_FOUND = 3
OTHERS = 4
where G_STATUS is your new status profile. It will update in your screen also.
Hope this will help u. -
BADI for changing fields during Creation of BP in CRM
Hello to everyone,
I need to find a BADI (or other way) to default several fields during BP creation in CRM (4.0 SR1 SP9). The fields I will like to set are TAX TYPE, TAX NUMBER, TAX CATEGORY, etc.. I have found the BADI BUPA_TAX_UPDATE but i dont see any suitable parameters (structures) to changes these fields. Please advice and thanks in advance.Hi
If you use function BUPA_NUMBERS_GET then your BP number will already be buffered and you can avoid a DB read. It may also be that the BP is not in the DB yet anyway.
You can only pass one GUID in at a time - loop through IT_CHANGED_INSTANCES into a variable of type BU_PARTNER_GUID and pass that into the function as input parameter IV_PARTNER_GUID.
Cheers
Dom -
Exit or Enchancement for changing amount in vendor line item in MIRO
Dear All,
I want to change the amount in vendor line item which get posted through MIRO.System generated 2 line item in case of payment terms of retention is used.
Requirement is that, in one line item of vendor, amount should get changed based on the logic and adjust the amount in other line item of vendor.
Request to please let me know, Where in Exit/ Badi or enhancement spot, we can write our coding, so that it should update the amount with new value at the time of posting the document.
Thanks & Regards,
Abhinav JainHi,
Try with Badi ACC_DOCUMENT
Regards,
Azeem -
Request for changing field size
Please increase the size of OITM.ItemCode and of OITM.SWW to at least 30 for each of it !!!
This suggestion has been given many time in the forum. Honestly, I think its a very bad suggestion.
I thought about that too, but its not really a solution that works in 'real life'. You will have dozens of selection masks, lists and so on throughout B1 that are based on the ItemCode field, and are even not adjustable to use the description field instead. You end up in a mess...
However, it seems that this is a requirement that comes up a lot. I think SAP really should extend the length of ItemCode to at least about 30 char.
Franz -
Exit for Change SA Release Status
Hi All,
I have activeted user exit ZXM06U46 (EXIT_SAPLEBND_002) for change Purchase Order Release Strategy its working fine for T-CODE: ME22N but when i make change in schedulling Agreement thru T-CODE: ME32l its not working here bcoz its not tiggered on SAVE. there is other User-Exit or BADI for change Schedulling Agreement Release Status . Plz help me.
Thanks & Regards
Jitendra Singh
Edited by: Jitendra Singh on Dec 17, 2007 1:48 PMsolve
-
Is there any user exit for changing V1 field value?
Hello Expert,
Is there any user exit for changing V1 update value?
For example, sales order number will populate 2LIS_11_VAHDR-VBELN. If other value need to populate 2LIS_11_VAHDR-VBELN, can we use any user exit to customize the V1 routine?
Please forget the enhancement for 2LIS_11_VAHDR. Just populate the system field VBELN.
Thanks
F-B-IHi,
Use the 'usual' user-exit for transactional data in R/3 EXIT_SAPLRSAP_001 (CMOD). Here your can overwrite VBELN for each extracted record with the value you want.
Hope this helps.
Grtx
Marco
Maybe you are looking for
-
Transferring Music from Macbook pro to iphone
So I just bought my new macbook pro and I have already transferred all my music from my iphone onto the computer itself. However, throughout the day I have been dowloading music from the internet using a youtube converter site. They dowloaded onto th
-
Hi, I have some select lists with submit(they are of submit type because they are dependent) and a submit button.On click of this button, a report neeeds to be generated based on the selected values. However, as the select lists are of type submit,it
-
HT1600 i have a mid 2010 7.1 mac book pro will apple tv mirroring work with it?
I have a 13in mid 2010 7.1 mac book pro. Will apple tv and mirroring work with it?
-
GarageBand does not open, but it's a bit bouncy....
Here's the dilemna: I need to create some stuff for my teacher for our Yearbook/Yeardisc, and I was going to use GarageBand to do this with. (Already know how, just hoping this will provide some incentive to help some random loser in another state as
-
how can i write a query to fetch date for the previous year, given any date inputted by the user ? (Datatype will be date)