Exit in OBB8 transactino

Hi,
Is there any exit in OBB8 transaction.
Priya

Hope this notes help:
Note 112385 - SD-FI:Document, posting, Payment baseline date
The baseline date ZFBDT to determine the terms of payment is made up of the billing date plus maybe the value days. If a value date is set, then the value date is used as the baseline date.
Solution
The posting date or the document date can within the SD-FI interface be influenced via user exit USEREXIT_FILL_XKOMK1 (Include RV60BFZA).

Similar Messages

Need to incorporate a new field in OBB8

Hi,
In configuration screen of OBB8(terms of payment), we require to add one z field. Can anyone help me to provide the field exit/user exit to incorporate the Z field. Please help me.

Hi,
i did create a new milestone usage. There i have the option to put "billing Plan Type", "Date Category" and "Start/Finish". I did not see an option where i can add a custom field. I also checked the node for "Billing Plan Types" and there also i saw only the standard screens / fields. Did i miss something here?
Thanks
Sreekanth

Payment Terms-OBB8

Hi ,
While configuring payment terms thorugh T.code OBB8
The client requirement is 45 days with payment at the end of month : for ex: the invoice date is April. 20th , payment due should be 31st of May. This requirement i am unable to configure through OBB8.
Please suggest me .
Thanks in advance.
Nageswar

Hi,
Step 1.
Update baseline date logic in form U100 in the program RGGBS000 thru SE38. You may need ABAP consultant's help for this.
Step 2.
Create a substitution with required prerequisites, selecting exit option and enter U100.
Best Regards,
Madhu

User Exits in FI

Dear All,
Could you please tell me the general impacts of user exists in FICO with an example?. How can we use this concept in FICO module?
I request you all, please reply your values.
Thanks with regards,
Ran

Hi,
I will give you my actual example of this aplication.
I would like configure a payment condition with 15 days out of week, but the OBB8 transaction doesn't have any field to define days of week. Only sequencial days numbers.
I have created a substituition Rule in GGB4 with a user exit. This User Exit is a ABAP logics codes in a especific SAP program. This allowed especific changes in my data field recognizing days in week.
I hope I help you.
Please, assign points for my contribution.
Rgds

Windows 7 displays error message when exiting +cursor issue

Two issues here. CS5 Phoshop on Wind 7 64 bit.
Physical processor count: 8
Processor speed: 3073 MHz
Built-in memory: 12279 MB
Free memory: 9577 MB
Memory available to Photoshop: 10934 MB
Memory used by Photoshop: 80 %
Image tile size: 128K
First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
Any help will be gratefully accepted.
Doug

function(){return A.apply(null,[this].concat($A(arguments)))}
doug87510 wrote:
The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
Well, that issue is simply a matter of hitting the Caps Lock key. When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair. That's a feature, not a bug.
Glad to hear the 11.1 drivers are out. I will download them and try them now myself.
Regarding "Adobe QT" crashing... QT brings to mind QuickTime, though that is Apple, not Adobe. Do you have Apple QuickTime installed?
Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
-Noel

Unable to capture new KUNNR in Exits from XD01

Hi all,
I am creating a new customer in XD01 and trying to capture the new customer number in an EXIT. Here, the customer number is (internally)automatically generated as a result of which this customer number cannot be captured in the exit. I am using SAPMF02D user exit.
Can somebody kindly give me some idea on how to capture this new customer on saving XD01?
Thanks,
Max

Hi Max,
http://help.sap.com/saphelp_46c/helpdata/en/63/ed2c7dd435d1118b3f0060b03ca329/frameset.htm
Re: Customer Master / Vendor master Creation
Re: How to transport Custom Screen Fields from XD01/XD02 screens to KNA1
Re: Customer (FD01,FD02) Enhancement
Hope it helps..
<b>Reward points if useful..</b>
Thanks & Regards
ilesh 24x7

When I login, all of my desktop items are gone, the "Finder" icon is bouncing and a message asking to restore windows is blinking but unresponsive. I can't exit out of it. What do I do? I've tried force quitting, and it doesn't get rid of it.

When I login, all of my desktop items are gone, the "Finder" icon is bouncing and a message asking to restore windows is blinking but unresponsive. I can't exit out of it. What do I do? I've tried force quitting, and it doesn't get rid of this message. When I login to my husband's account, this message does not appear.

Hey sunnyday7!
Here is an article that can help you address this issue:
OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/ht3411
Additional Information
OS X automatically relaunches the Finder when it is quit. If the Finder is unresponsive, use Force Quit to relaunch it. Select Finder in the Force Quit Window or Dock, then click Relaunch.
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Using iPad mail program I have a draft of an email. I attempted to "cancel" and "delete draft" but it is still on my screen even after shutting down and restarting. How do I exit so that I can use other mail functions?

Using iPad mail program I have a draft of an email. I have attempted to "cancel" this and "delete draft" but the email stays on my screen. How can I exit this so that I can use other email functions?

Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

User exit ZXPADU02 - evaluating SY-UCOMM

Hello everyone,
I am trying to display an error message whenever someone tries to create a new work schedule rule (P0007-SCHKZ) in infotype 7. However, the error message should just come up when the user is trying to save his data.
I am using user exit ZXPADU02 for this purpose. My problem is that SY-UCOMM does not seem to hold reliable data in this user exit, and SSCRFIELDS does not seem to be supported at all.
My code looks like this (only the relevant code snippet in ZXPADU02):
CASE INNNN-INFTY.
        WHEN '0007'.
      CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
        EXPORTING PRELP = INNNN
        IMPORTING PNNNN = P0007.
      CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
        EXPORTING PRELP = PSAVE
        IMPORTING PNNNN = P0007_ALT.
      IF P0007_ALT-SCHKZ <> P0007-SCHKZ
      AND IPSYST-MASSN IS INITIAL " do not warn within an info group of a personnel action
      AND SY-UCOMM = 'UPD'. " only warn when saving the data -> problem here <-
        MESSAGE 'Do not change IT7 directly or else.' TYPE 'I' DISPLAY LIKE 'E'.
        SHOW_DATA_AGAIN = 'X'.
      ENDIF.
At first glance, the above works nicely. But this is what happens when I test more thoroughly:
I create a new period in IT 7, enter a P0007-SCHKZ other than the one that was previously valid, press F11. Some warnings appear (for different reasons), which I dismiss using the Enter key. Afterwards, the above code fires, the error message is being displayed, and I am thrown back into the data screen. So far, so good.
Now I simply alter the value in the field "Weekly hours" (P0007-WOSTD) and press Enter (!). Again a series of warnings appear, including one that a dataset is going to be deleted (seeing that an IT 7-period with just the same date range already exists). I confirm that with Enter, and the data is being saved. The above code does not fire because I have only pressed Enter - but the data is being saved anyway!
Looks like a pretty erroneous behavior on the side of the SAP system. The question is whether I have a chance to do something about it in the code.

Mihir Nagar wrote:
Dear Petersen,
Your IF condition seems ok. I doubt on the message statement. Can you replace your message statement with type E.
MESSAGE 'Do not change IT7 directly or else.' TYPE 'E'.
      ENDIF.
Hope this works.
Regards,
Mihir.
I did not expect this to work, because normally you use type 'E'-messages only in certain PAI-environments, but it does the job, thank you!
make use of field IOPER of the structure PSYST to check on the infotype actions INS, MOD, COP, DEL...
In this particular case I did not care, so I did not check that. IT 7 should only be maintained through personnel actions in our case.
Next you can check with sy-ucomm field the different between "enter" and "save". With "save" sy-ucomm will be 'UPD'.
That is what I did, but as I described, there was a situation when SY-UCOMM is SPACE, but the system saved anyway due to a prior save attempt.

Error in customer exit variable

Hi All,
My requirement is end user will enter fiscal year and in report out put I need to display fiscal year periods.
For this I have created two variables
1.Fiscal year-Manual Input/Default value-Single value-Mandetary-Variable is ready for input.
2.FiscalyearperiodCustomer ExitInterval-Optional
DATA : fiscyear1 TYPE numc4,
      i_fiscper_high TYPE /bi0/oifiscper.
DATA: datein LIKE sy-datum .
CMOD Code is as below
CASE i_vnam.
WHEN 'ZFISCVAR'.
    LOOP AT i_t_var_range INTO loc_var_range
                         WHERE vnam = 'ZFISCYER'.
      CLEAR l_s_range.
      fiscyear1 = loc_var_range-low(4).
      CONCATENATE fiscyear1 '001' INTO i_fiscper_high.
      l_s_range-low = i_fiscper_high.
      l_s_range-high = i_fiscper_high.
      l_s_range-sign = 'I'.
      l_s_range-opt = 'BT'.
      APPEND l_s_range TO e_t_range.
    ENDLOOP.
But we are getting error after entering fiscalyear
error message --Value 2009001 for uesr exit variable xxxx is invalid.
Regards
Albaik

Hi All,
Below is the code and there is no problem with code but there was some problem with Fiscal year varient and solution is we went to source system -right click-Transfer global settings---- and maintained Fiscal year varient
DATA: l_s_range TYPE rsr_s_rangesid.
DATA: loc_var_range LIKE rrrangeexit.
DATA: datein LIKE sy-datum .
DATA: L_S_RANGE_2 TYPE RSR_S_RANGESID.
DATA : I_FISCPER_HIGH TYPE /BI0/OIFISCPER ,
       I_FISCPER_LOW TYPE /BI0/OIFISCPER.
DATA : FISCYEAR1(4), FISCYEAR2(4),CALMONTH TYPE /BI0/OICALMONTH .
WHEN 'ZFISPERIOD'.
    LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
                         WHERE VNAM = 'ZFISYEAR'.
      CLEAR L_S_RANGE.
      FISCYEAR1 = LOC_VAR_RANGE-LOW(4).
      CONCATENATE FISCYEAR1 '001' INTO L_S_RANGE-LOW .
         L_S_RANGE-SIGN = 'I'.
      L_S_RANGE-OPT = 'EQ'.
      APPEND L_S_RANGE TO E_T_RANGE.
    ENDLOOP.
ENDCASE.

Using a variable not in the Export,Import, table Parameters in USER EXIT

Hi all,
During the Invoice Creation, I need to add an entry in the VBFS table, so that it will be displayed in the system log. In the FM 'RV_INVOICE_CREATE', the structure corresponding to it is XVBFS. There is a user-exit CALL CUSTOMER-FUNCTION '002', in this FM 'RV_INVOICE_CREATE'. But the import, export or Table Parameters does not have XVBFS.
How can I use XVBFS inside the User exit?..
Please help.
Regards,
Asha

Hi,
I dont know whether this will help u...
write this in user exit...to access variables/tables of main program..
FIELD-SYMBOLS: <komv>.
ASSIGN ('(SAPLMEPO)TKOMV[]') TO <komv>.
where.. SAPLMEPO is the main program...and TKOMV[] is a internal table in SAPLMEPO.
regards
Sukriti....

Error while executing a uinx script in BODS job - exit code 127

I am executing a UNIX script using BODS job and it is giving an error message saying 'Program terminated because of exit code 127'. The same script i am able to execute in UNIX. I am not able to find the solution for this.

Using a print command with return code 8 should give more insight to the error.
print(exec('sh \bin','<your command>',8));

Error while running a OA framework Page Process exited with exit code 1.

Hi all,
I downloaded the Patch 4573517 from Metalink for JDEV with OA extension release 11i.I followed all the instruction of the setup init and installed the Jdev,also mytutorial pages got compiled successfully,but when i trie dto run the page
Run > Run test_fwktutorial.jsp from the main menu.
it gives me error.The error is as follows
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\D drive\OA_2008\jdevbin\jdk\bin\javaw.exe -client -classpath C:\D drive\OA_2008\jdevbin\j2ee\home\oc4j.jar;C:\D drive\OA_2008\jdevbin\jdev\lib\jdev-oc4j.jar -Xbootclasspath/p:C:\D drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\D drive\OA_2008\jdevbin\jdev\appslibrt\nls_charset12.zip -DFND_JDBC_STMT_CACHE_SIZE=200 -DCACHENODBINIT=true -DRUN_FROM_JDEV=true -mx256m -Doracle.j2ee.dont.use.memory.archive=false -Xverify:none -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 com.evermind.server.OC4JServer -config C:\D drive\OA_2008\jdevhome\jdev\system9.0.3.5.1437\oc4j-config\server.xml
[waiting for the server to complete its initialization...]
java.lang.NoClassDefFoundError: drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14/jar;C:\D
Exception in thread "main"
Process exited with exit code 1.
I am not understanding why it is going in exception.One reason which i doubthere is the line
java.lang.NoClassDefFoundError: drive\OA_2008\jdevbin\jdev\appslibrt\ojdbc14/jar;C:\D
here in this line the last word is ojdbc14/jar,i think it should have been ojdbc14.jar.
Can any body please help me out on how to correct this problem.Thanks
Manish

Manish,
You should ask on the OA Framework Forum.
john

Why do I get "The exception Privileged instruction (0xc0000096) occured in the application" error message when exiting LabVIEW 6.1?

I have created a vi that uses the LV-GPIB and database connectivity vis. The program runs fine and it ends execution by running the "Close Database Connection.vi".
After closing out my front panel windows and exiting LabVIEW 6.1, I get an error dialog box that reads the message "The exception Privileged instruction (0xc0000096) occured in the application". What does this error mean and how do I resolve it?
Thanks,
Taf

Hi Taf,
Given the broad scope of your application, it may be best to try and isolate the problem down by taking out parts of your application and simplifying it down as much as possible until you can get a consistent version that throws this exception. I would first try to take out either the GPIB or database connectivity portions of the application to narrow down our problem. This error generally occurs when accessing DLLs and external applications, so I wouldn't be surprised if it's the GPIB or database. Let's try to see exactly which one it is and then we can dig deeper into that part of the code. Thanks for your cooperation!
Jeremy L.
National Instruments
Jeremy L.
National Instruments

How to find out the user exit is implemented

Hi All,
Kindly let me know the process to be followed to find out the User exit is implemented in SAP system.
I have seen many senriors suggestions for some treads to check if there is any Exit is implemented in the process when the system is behaving differently rather standard.
Is it the only way with help of ABAP'er we can find out or the functional consultant also can find out through some procedure?
I tied in google for this doubt, but i could not get the relavant answer.Pleaea execuse me if this already answered.
Thanks,

Hi Krishna/TW,
Thank you for your immediate replies. Sorry i think i have not explained correctly my requirment.
Let me explain my requirement once again.Let us say Comapny has implemented one Exit in the project, now i want to find out what exactly the Exit was implemented.
Example: In STO process user is able to increase the qty in delivery. As per the client requriement system should not allow.
This is not possible in standard to control even after maintainig check over delivery field in 0VLP.
For this comapny has already implemented one enahnceament.
User Exit : USER EXIT_READ_DOCUMENT
Program: MV50AFZ1
like this when any one joined in the project we do not know what are all the Exits are implemented in the SAP system where we are working.
So if i want to find out if there is any Exit or enhancement implemented, what is the process to find out?
I hope now am clear with my requirement.
Thanks in advance.

Exit in OBB8 transactino

Similar Messages

Maybe you are looking for