Exit or badi for t code EXPD (Progress Tracking)

Hi Gurus
I have to add two fields in t code EXPD (Progress Tracking) can you please tell me the name of Exit or BADI for that.
Thanks In advance.
Chitta Ranjan Mahato

Frankly, I never worked on EXPD (Progress Tracking).
Still, I believe the following SAP Help link will be helpful to you:
- [ BAdIs for Progress Tracking |http://help.sap.com/saphelp_470/helpdata/en/d6/89412e7197f1438e16baf05abe2fe5/content.htm]
Regards
JP

Similar Messages

User exit or badi for transaction code CORS

Hi All
I am looking for user exit or badi to update item text while executing transcation code CORS.
Please Advice
Thank You
Ravindra Suvarna

Hi
Check these enhancements and exits
CONFPS05 PS confirmation: Customer specific enhancements when saving
EXIT_SAPLCORF_010 PS Confirmation: Customer-Specific Enhancements when Saving
CONF0001 Enhancements in order confirmation
EXIT_SAPLCORU_001 Order Confirmation: Deactivation of Functions

User Exit or BADI for T.code CO11N

HI All,
I created a Production Order(100023) using TCode CO01 with 10 Qty.
When i am creating a Production Order confirmation using TCode CO11N, i Confirmed 9 Qty and 1 Qty for Rework Order, it is confirming the 9Qty and creating a new Production Order (100024) for 1Qty.
As per the requirement it is working fine. While system creating a Production Order (100024) for the Rework Qty, i need to populate the Reference Production Order number (100023) in the field Ref. Order in Control Data tab in the Production Order.
Can any one suggest me how to populate this field? Is this possible by any USER EXIT or BADI ?
Or Can we do it by configuration?
Regards,

Hi Prakash,
Thank you for response,
I tested this EXIT, it consists only Original Prod Order and its Confirmation details only. It doesn't have the Rework Prod Order details.
I need to populate the Original Prod Order number in Rework order control data.
Regards,
Srinivas K

User Exit or Badi for transcation code COR6N

Hi All
While saving the document through COR6N, i want to update the item text of all the items with the value of the batch number of the second item in the item list.
I am looking for user-exit or badi where I got access to MSEG internal table and it also allow me to change item text.
Please advice.
Ravindra Suvarna

Check this Badi WORKORDER_GOODSMVT.
and in this COGI_POST have access to the MSEG table.
Regards
Vijay

User Exit or BADI for Updating Tax code (MWSKZ) using ME21N

Hi all,
I am trying to fin out an exit or badi for Updating Tax code (MWSKZ) and Unit of Measure in transaction ME21n.
The scenario is like this...
For Purchase Orders Tax code will be defaulted from Purchasing info record or contract or parameter id for that item-vendor-plant.
If the Tax Code is not defaulted and account assignment is blank then tax code on the PO is updated according to the below mentioned table
Table
Supplying Plant/              Receiving Plant                      Tax code
Vendor/Country
Any plant/vendor/
country                           5050(NA)                               20
2300                              6700                                     E0
If the tax code on PO cannot be updated by the above table, then buyer needs to put tax code on the purchase order manually.
Thanks,
Shiva, Bangalore

Hi Siva.,.,.,
These r the exits.,..,which will be called while calling ME21N/ME22N/ME23N
EXIT_SAPMM06E_006
EXIT_SAPMM06E_007
EXIT_SAPMM06E_008
EXIT_SAPMM06E_009
EXIT_SAPMM06E_012
EXIT_SAPMM06E_013
EXIT_SAPMM06E_014
EXIT_SAPMM06E_016
EXIT_SAPMM06E_017
EXIT_SAPMM06E_018
U want to default some values while the Initial screen will come right,
while u Enter ME21N in command Prompt.,.,two exits will get triggerd,
EXIT_SAPMM06E_014
EXIT_SAPMM06E_016
If u want to Default some values u can use these two exits.,.
Try using EXIT_SAPMM06E_016.,.this will solve ur purpose.
and if the user changes some values on screen.,,and you want them to get reflected .,.,.that means if user changes and saves data .,.
While saving.,.,EXIT_SAPMM06E_012 and EXIT_SAPMM06E_013 will get triggerd
Try using EXIT_SAPMM06E_013.,,.it was somehow the same requirement as mine.,.,IN my case it worked fine.,.,
Regards
Debasish
Message was edited by:
        Debasish Das

User exit or BADI for recruitment

Hi,
I am new to HCM, can you give me user exit or badi for recruitment.
Requirement - i have developed an infotype which i am updating through BSP, while the custom infotype is updated it should simultaneously update some of my Z tables. Hoping for positve replies earliest.
Thanks in advance:-
Santosh

Hi,
InfotypeThe data fields of HR master data, time management and recruitment are grouped logically into information types or infotypes for short.
Examples of infotypes are "Family/Related Person", "Organizational Assignment, "Basic Pay".
The following naming conventions apply to infotypes:
Infotypes 0000 to 0999 are used for HR master data
and sometimes for applicant data
Infotypes 1000 - 1999 for organizational management
Infotypes 2000 - 2999 for time data
Infotypes 4000 - 4999 for applicant data
Infotypes 9000 - 9999 for customers
Function character of step
This controls for which types of processing (create, change and/or delete a data record) a dynamic action should be carried out.
The processing type is indicated by a two-digit numeric value. These values can be added up; in other words, you can enter several processing types for each infotype, subtype or field. A dynamic action can also be carried out independent of the current processing type.
00 for Independent of the current function carried out
02 for Change
04 for Create
06 for Change and create
08 for Delete
10 for Change and delete
12 for Create and delete
Examples
If you enter 06, an action is carried out if the specified infotype was created or changed.
If you enter 00, an action is carried out irrespective of whether the specified infotype was created, changed or deleted.
Variable function part
The variable function part, which depends on the indicator for step, can have the following meaning:
P - Plausibility checks
You can enter values for specific infotype fields. Field names must be entered in full. Literals and constants can serve as comparison values. These must be enclosed by inverted commas. Variables can also be used.
The old value of a field can be used for comparison; the field name must be preceded by PSAVE-.
If fields of other infotypes are used for comparison, these must be stored in the module pool of the current infotype.
The following comparison operators are supported:
= equal to,
< less than,
<= less than or equal to,
> greater than
>= greater than or equal to and
<> not equal to.
Consecutive checks must be linked by a logical AND. Logical OR links must also be indicated by a /X.
Note:
Note that all checks with OR links must have a /X.
If the result of the comparison operation is not "true", then the following commands (I, F, W etc.) are skipped over until a field is reached or a new comparison operation takes place.
Examples
Infotype Field ..... Ind. Variable function part
0007 STAT3 P P0007-STAT3='0'
0007 STAT3 P PSAVE-STAT3='1'
The step is taken if the value in the P0007-STAT3 field changes from 1 to 0.
0007 P P0013-KLKZ1<>'0'/X
0007 P P0013-ALVKZ<>'0'/X
0007 P P0013-RVKZ1<>'0'/X
0007 P P0013-RVNUM=SPACE
The first three conditions are linked by an OR; at least one of these conditions must be met. Condition 4 must always be met.
The step is taken if the following holds true:
P0013-KVKZ1 not equal to 0 or P0013-ALVKZ not equal to 0 or P0013-RVKZ1 not equal to 0, and P0013-RVNUM empty.
I - Maintain infotype record
Enter the step, infotype, subtype, object ID, start and end dates of the record and an indicator which defines whether the step is to be run in the background. The possible actions are INS, COP, MOD, and DEL.
Use commas to separate selection criteria just like the separator in the matchcode. If an entry is missing, the system inserts a comma.
Separate the indicator for suppressing dialog from other entries by a slash D (/D).
Constants, such as those for subtypes, are not enclosed in inverted commas.
Variable entries are also permitted. Fields containing such values must be put in brackets.
Examples:
Infotype Field .... Ind. Variable function part
 .... I INS,19,01/D
Step: Create a Dates record, subtype 01, run in the background
 .... I DEL,14,M559
Step: Delete Rec. Payments/Deds. record with subtype (wage type) M559.
0007 .... I INS,8,,,(P0007-BEGDA),(P0007-ENDDA)
Step: Create a Basic Pay record (0008) without subtype and object ID. The start and end dates are the same as those in the current Planned Working Time record (0007); specify these two fields only if they are filled because the dynamic action was triggered by this infotype.
W - Default values for new record
Literals or variables are used as default values.
Set the defaults for the infotype, subtype, object ID, start and end dates using an I step and not a W step.
Do not set defaults for Q fields of an infotype because the values for these fields are derived from the corresponding P fields.
Examples
Infotype Subtype ..... FC Ind. Variable function part
0021 2 04 I INS,0015,M430
0021 2 04 W P0015-BETRG='10000'
When a Family/Related Person record (0021) record with subtype 2 (child) is created, an Additional Payments record (0015) with a default amount of 100.00 is created.
V - Cross-reference to another step
Here, you can combine fields to groups. The variable function part contains the value in the field which follows the "field" column. Steps which are specified only for the following field are also triggered for each of the other fields.
Examples
Infotype Field ..... FC Ind. Variable function part
0016 PRBZH 06 V PRBZT
0016 PRBZT 06 I DEL,0019,01/D
Infotype 0019, subtype 01 is deleted in the background when the field PRBZT or PRBZH in infotype 0016 is changed or created (function code 06).
The following entries are equivalent:
0016 PRBZH 06 I DEL,0019,01/D
0016 PRBZT 06 I DEL,0019,01/D
F - Call a routine
You can call internal (module pool) as well as external routines.
If you call external routines, type the program name in brackets after the routine name. Do not specify 'using' parameters. When calling an external routine, all data must be declared in a common part. You can use the fields of structure RP50D to return values from the routine. These are not used in the standard system and can only be populated via the routine and then can be used for defaults (W-Commands).
This allows customer-specific routines to be formulated with all the above steps.
Example 1:
Infotype Field ..... Ind. Var.function part
0016 PRBZT F PROBATION
0016 PRBZT I INS,19,01
0016 PRBZT W P0019-VTRMN=PRBEND
Module pool MP001600 contains the PROBATION routine. This routine uses the entries in the fields P0016-PRBZT and P0016-PRBEH to determine the end of the probation period which it stores in the field PRBEND.
The system creates a new 'Dates' record with the reminder date = PRBEND.
Example 2:
Infotyp ..... Ind. Var. function part
0001 F GET_DATE(ZPUDYN01)
0001 I INS,19,01
0001 W P0019-VTRMN=RP50D-DATE1
The GET_DATE routine in program ZPUDYN01 calculates a date and enters this date in the RP50D-DATE1 field via "TABLES RP50D" in ZPUDYN01. This date can be user-defined in GET_DATE: if necessary, user-defined infotypes can be read afterwards.
M - Send a mail
Enter the name of the feature which defines the characteristics of the mail.
Example
Infotype Field ..... Ind. Var.function part
0001 SACHP M M0001
A mail is sent when the field SACHP is changed. The characteristics of the mail are defined in feature M0001.
In the standard system, feature M0001 is provided as a model. The documentation on feature M0001 explains how to define the characteristics of a mail.
ADDITIONAL HINTS
If you use a date as a constant, enter it as YYYYMMDD (YYYY=year, MM=month, DD=day).
The table strings T001P, T503 and PSPAR are filled with the values which are valid on the record start date.
The old values of the infotype are stored in the field string PSAVE. The structure of this string is the same as the Pnnnn structure (nnnn=infotype). The structure is filled with (valid) values only when the delete, change and create functions are used.
Please read Create dynamic actions in the Implementation Guide.
Regards
Bernd

User Exits or BADI for Tcode ME51N

Hi All,
My requirement is i need to check available quantity at the time of Purchase req creation. If PR quantity is available in stock then it should not allow to create new PR.
Is there any user exit or Badi for this requirement. Kindly send me.
Regards,
Paras

Hi Paras,
Copy this program and execute. Will get all list of existin g Exits and Badis.
very useful program
Below code will give a list of BADIs for particular transaction.
*& Report ZNEGI16 *
REPORT ZNEGI16 .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Reward points if this helps.
hema.

User Exit or BADI for ME21N

Hi All,
We are in a situation where in we need to Change the Distribution Channel in the Shipping tab of ME21N transaction.
Previously, the distribution channel is being picked up form the config (SPRO - Shipping data for plant) but before it picks up from the config we need to change it and update the other distribution channel in the PO.
We have tried with most of the User exits and BADIs but all of those are of no use for our requirement, as these user exits and badis are triggered after we click on save button. But we need to change the Distribution channel at the point of determination of Shipping data by the system i.e. before save.
Can any one please help me out with this situation with some User exits or BADIs that are triggered before save button.
Note: The Shipping data is in EKPV table. We need to change the VTWEG field in EKPV.
Thanks in Advance,
Asif Ali Khan

Asif,
see these are Exits and BADI for ME21n,
Enhancement/ Business Add-in            Description
Enhancement
MEFLD004                                Determine earliest delivery date f. check w. GR (only PO)
MELAB001                                Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1                                Enhancement to Document Overview ME21N/ME51N
MEVME001                                WE default quantity calc. and over/ underdelivery tolerance
MM06E001                                User exits for EDI inbound and outbound purchasing documents
MM06E003                                Number range and document number
MM06E004                                Control import data screens in purchase order
MM06E005                                Customer fields in purchasing document
MM06E007                                Change document for requisitions upon conversion into PO
MM06E008                                Monitoring of contr. target value in case of release orders
MM06E009                                Relevant texts for "Texts exist" indicator
MM06E010                                Field selection for vendor address
MMAL0001                                ALE source list distribution: Outbound processing
MMAL0002                                ALE source list distribution: Inbound processing
MMAL0003                                ALE purcasing info record distribution: Outbound processing
MMAL0004                                ALE purchasing info record distribution: Inbound processing
MMDA0001                                Default delivery addresses
MMFAB001                                User exit for generation of release order
MRFLB001                                Control Items for Contract Release Order
LMEKO001                                Extend communications structure KOMK for pricing
LMEKO002                                Extend communications structure KOMP for pricing
MM06E011                                Activate PReq Block
AMPL0001                                User subscreen for additional data on AMPL
LMEDR001                                Enhancements to print program
LMELA002                                Adopt batch no. from shipping notification when posting a GR
LMELA010                                Inbound shipping notification: Transfer item data from IDOC
LMEQR001                                User exit for source determination
LMEXF001                                Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001                                Customer-Specific Source Determination in Retail
MEETA001                                Define schedule line type (backlog, immed. req., preview)
ME590001                                Grouping of requsitions for PO split in ME59
M06E0005                                Role determination for release of purchasing documents
M06E0004                                Changes to communication structure for release purch. doc.
M06B0005                                Changes to comm. structure for overall release of requisn.
M06B0004                                Number range and document number
M06B0003                                Number range and document number
M06B0002                                Changes to comm. structure for purchase requisition release
M06B0001                                Role determination for purchase requisition release
Business Add-in
ME_PROCESS_PO                           Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP                         Processing of Component Default Data at Time of GR: Customer
ME_PO_SC_SRV                            BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST                      Enhancements to Price Determination: Customer
ME_PO_PRICING                           Enhancements to Price Determination: Internal
ME_INFOREC_SEND                         Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO                              Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST                          Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK                    FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING                          Clearing (Offsetting) of Down Payments and Payment Requests
ME_DEFINE_CALCTYPE                      Control of Pricing Type: Additional Fields
ME_COMMTMNT_REQ_RE_C                    Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE                    Check of Commitment Relevance of Purchase Requisitions
ME_PROCESS_PO_CUST                      Enhancements for Processing Enjoy Purchase Order: Customer
SMOD_MRFLB001                           Control Items for Contract Release Order
MM_EDI_DESADV_IN                        Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP                    Determination of Delivery Address
ME_WRF_STD_DNG                          PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP                          Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF                    BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS                     Tax jurisdiction code taken from address
ME_REQ_POSTED                           Purchase Requisition Posted
ME_REQ_OI_EXT                           Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE                       BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_PURCHDOC_POSTED                      Purchasing Document Posted
ME_PROCESS_REQ_CUST                     Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ                          Enhancements for Processing Enjoy PReqs: Internal
ME_COMMTMNT_PO_REL_C                    Check for Commitment-Relevance of Purchase Orders
ME_CCP_BESWK_AUTH_CH                    BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK                     BAdI to check whether CCP process is active
ME_BSART_DET                            Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC                     BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO                       BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT                            BAdI for Enjoy Purchasing GUI
EXTENSION_US_TAXES                      Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE                       BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK                       BAdI: Enhancement of Archivability Check (MM_EKKO)
ME_CCP_DEL_DURATION                     Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_COMMTMNT_PO_RELEV                    Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH                    BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN                    Commitment for return item
ME_CIP_REF_CHAR                         Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE                     Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO                         Copy PO data for use by Country version India
ME_CIN_LEINRF2V                         BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R                         BADI for CIN India - Delivery charges
ME_CHECK_SOURCES                        Additional Checks in Source Determination/Checking
ME_CHECK_OA                             Check BAdI for Contracts
ME_CHECK_ALL_ITEMS                      Run Through Items Again in the Event of Changes in EKKO
ME_CHANGE_OUTTAB                        Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER                     Customer-Specific Characteristics for Product Allocation
Amit.

Is there any exit or badi for "F-59"?

Hi,experts,
is there any exit or badi for "F-59" after "SAVE"?
Thanks in advance.

Hi ,
You can search an exit for your program by using:
CALL CUSTOMER statement ,it will give you all the function
exits in your program and then in their included you can set a breakpoint
and check which one gets triggered while the save option or
You can also search a BADI for any particular transaction ,
for that first go to T-Code-SE24 and give
the Object Type as CL_ExitHANDLER.
Then double click on to Get_Instance Method and set
a brakpoint on the line:
CALL METHOD cl_exithandler=>get_class_name_by_interface.
Next step is to execute your T-Code f-59.
It will go into debugging mode.
Start debugging by writing EXIT_NAME in the checking area while debugging.
This EXIT_NAME will give the BADI'S used with each screen processed.
Hope it helps
Regards
Mansi
Edited by: MANSI ASNANI on Mar 25, 2009 7:06 AM

User Exits or BADI for RMWB

Hello Experts,
I want to put a check on material code while forming the composition for recipe in transaction RMWB. I am entering the material uner the input and output tab. Can anyone please tell the available user exits or BADI for this. I checked few, however, the material no. is not getting captured.
Thanks in advance.
Regards,
Sonal

Hello Sonal,
You can make use of field symbol to read the value of a variable in BADI.Press F1 on field and read the program name and screen field name of a variable and the use below things in the BADI code.
Field-symbol <fs> type any.
ASSIGN ('(program name)variable name') TO <fs>.
IF sy-subrc EQ 0 AND <fs> IS ASSIGNED.
..you will get the variable value here in <fs>
ENDIF.
Thanks,
Pawan

Stop standard process in user exit (or badi) for ME21N.

Hello,
I have implemented a user exit (and also a BADI) for transaction code ME21N.
The user exit is executed before saving the purchase order.
In my user exit, I just check data and if they are wrong, I just want to stop the process displaying an error message.
So, I've just used 'MESSAGE Exxx(xxxx)'.
The problem is that the standard process catch the error and treat it in stead of stopping. The standard process treats the error and proposes the user to chose if he(she) wants to continue or to stop (within a popup).
I just want to stop the process, displaying a error message.
If someone has a idea about how I can realise that, please let me know.
Giuseppe,

Which Exit/Badi did you implement? And Error message should normally stop the process. Maybe you have implemented the wrong exit.

Menu exit or BAdi for IW28 and IW65

Dear Experts,
Please provde Menu exit or BAdi for IW28 or IW65, to calling customized program.
i.e. have one 'Z' Program, i want to cali that from IW28 and IW68 using menu option.
Regards,
venkey

Venkey,
Here are some options...
IW28: If you are in ECC 6.0 with enhancement pack 3 then you could enhance the report using BADI BADI_EAM_RIQMEL20_FCODE_CUS1 To create a custom function code. You could also consider copying the report and creating a new report. You could also use the GuiXT tool to create a push button on the output screen and call the Z report.
IW42 and IW65 : There are no standard user exits to do this, You will have to copy and change the program. You could also use GuiXT tool to create a Push button for this transaction.
Regards
Narasimhan

User exit or BADI for F110 transaction

Hello, i need a user exit or badi for the F110 transaction with the objective to shoot workflow of approval of payment proposal.

Hi Mathias,
Welcome to SDN.
Please check this link for sample code to find user exits and BADIs for a given transaction code.
User Exit
Hope this will help.
Regards,
Ferry Lianto

User exit or badi for transaction IW32

Hi all,
I am searching for user exit or badi for Transaction IW32 but not finding as per my requirement.here in transaction IW32 if field system status(STTXT) key value is 'Released', all line item components should get displayed in display mode.it should not allow to edit or change line item components.can anyone give user exit or BADI to achieve this.
Thanks in advance.
Regards,
Harshada

Hi,
Try to use this exit:
Enhancement EXIT_SAPLBSVA_001 STATTEXT Modification exit for formatting status text lines
Sample code:
IF ( sy-tcode = 'IW32') .
DATA: lv_str1 TYPE string.
FIELD-SYMBOLS : <fs_qmart> TYPE ANY.
lv_str1 = '(SAPLIQS0)VIQMEL-objnr'.
ASSIGN (lv_str1) TO <fs_objnr>.
SELECT SINGLE inact INTO lv_inact FROM jest WHERE objnr = viqmel-objnr
 AND stat = c_stat
 AND inact = space.
 IF sy-subrc = 0.
 LOOP AT SCREEN.
 screen-input = 0.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
ENDIF.
Alternativ badi:
BADI SAPLIQS0 IQS0_STATUS_MAINTAIN Control of Changeability of User Status
I hope this may helpfull.
Thanks,
AMS

User Exit or BADI for F-28 on Save Event

Dear Expert,
Please tell me User Exit or BADI for F-28 on Save Event for T.Code F-28.

Dear Expert,
Please tell me User Exit or BADI for F-28 on Save Event for T.Code F-28.

Exit or badi for t code EXPD (Progress Tracking)

Similar Messages

Maybe you are looking for