EXIT or BADI to TO01/TO02

I need a EXIT or BADI after save to transaction TO01/TO02.
Thanks,
JNilson.

Hi Nilson,
Go to transaction SE24, class name CL_EXITHANDLER, go to methods, double click ofn method GET_INSTANCE.
Set a break point at
CALL METHOD cl_exithandler=>get_class_name_by_interface
EXPORTING
      instance                      = instance
    IMPORTING
      class_name                    = class_name
    CHANGING
      exit_name                     = exit_name
    EXCEPTIONS
      no_reference                  = 1
      no_interface_reference        = 2
      no_exit_interface             = 3
      data_incons_in_exit_managem   = 4
      class_not_implement_interface = 5
      OTHERS                        = 6.
CASE sy-subrc.
Now run trasaction to01/02 , your control will break at each BADI, exit name and instance will give you the BADI details.
Next go to SE84, Enhancemnts   -> customer exits-.Enhancements-> give the package name and excecute, will enlist all the exits in that package.
now take decision on which package you are gonna use.
Thanks and Regards,
Antony Thomas

Similar Messages

Custom exit or badi for changing the user fields in operation of process order

Hi all
    I want to find a exit or badi to set default value to the user fields in operation of process order when COR1.
    I have tried exit 'PPCO0001', but this exit is call after commit work, so I can not change any thing
    I also tried to use badi 'workorder_update', 'before_update', but all parameters in this BADI are importing, can't be changed, I've tried to change it and then program dump.
    Do you have any solution for this question?
Thanks

Do a Implicit Enhancement at the PBO of this subscreen.

Need a Exit or BADI For Changing Validation Class (PRUEFKL) during EL28

need to change the Validation Class Validation Class (PRUEFKL) or send it blank in order to remove all valdition during Meter read uplaod , Can any one suggest a BADI or user exit or anything where in i can change the Validtion class before validation take place at the time of meter read uplaod . As validtion class we do not pass in EL28 it usually get filled with 001 ans 002 .
Thanks in advance .
regards
rajeev

Thank for the response however my question was , can we change the Validation Class throght code any exit or BADI during el28 not by config as config will be done for every thing as this we need to do only for a paticlular program .
So in short i m looking for any enhancement point ( Exit /BADI ) which willl trigger during el28 and i will be able to send emply validation class in initial stage to avoide validation .
Regards
Rajeev
Edited by: rajeevkohli on Aug 3, 2011 2:25 PM

Exit or Badi to prevent MIGO Goods Receipt on PO with Inbound Delivery

Hi,
I am hoping that someone can provide me with some direction on how to prevent the use of MIGO for GR when the PO being received is (or should be) linked to an inbound delivery.
For purchase orders with a confirmation control key an inbound delivery is to be created and the goods receipt needs to be done from the inbound delivery. This scenario also includes the case of stock transport orders whereby an inbound delivery is created form the outbound delivery. On the other hand for purchase orders without a confirmation control key no inbound delivery is created and the MIGO transaction is to be used to post the goods receipt.
Since both processes are possible, I would like to prevent people from posting the GR using MIGO if certain conditions pre-exist.
Can anyone suggest a means to accomplish this goal? Is there an exit or badi in MIGO that you would suggest using?
Thanks,
Paul

Hi,
The following user eixts and badis available for migo transaction:
Enhancement/ Business Add-in            Description
Enhancement
MB_CF001
Customer Function Exit in the Case of Updating a Art. Doc.
MBCF0011
Read from RESB and RKPF for print list in MB26
MBCF0010
Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0009
Filling the storage location field
MBCF0007
Customer function exit: Updating a reservation
MBCF0006
Customer function for WBS element
MBCF0005
Article document item for goods receipt/issue slip
MBCF0002
Customer function exit: Segment text in article doc. item
Business Add-in
MB_RESERVATION_BADI
MB21/MB22: Check and Complete Dialog Data
MB_QUAN_CHECK_BADI
BAdI: Item Data at Time of Quantity Check
MB_PHYSINV_INTERNAL
Connection: Core Inventory and Retail AddOn
MB_MIGO_ITEM_BADI
BAdI in MIGO for Changing Item Data
MB_MIGO_BADI
BAdI in MIGO for External Detail Subscreens
MB_DOC_BADI_INTERNAL
BAdIs when Creating an Article Document (SAP Internal)
MB_DOCUMENT_UPDATE
BADI when updating article document: MSEG and MKPF
MB_DOCUMENT_BADI
BAdIs when Creating an Article Document
MB_CIN_MM07MFB7_QTY
Proposal of quantity from Excise invoice in GR
MB_CIN_MM07MFB7
BAdI for India Version exit in include MM07MFB7
MB_CIN_LMBMBU04
posting of gr
MB_CHECK_LINE_BADI
BAdI: Check Line Before Copying to the Blocking Tables
ARC_MM_MATBEL_WRITE
Check Add-On-Specific Data for MM_MATBEL
ARC_MM_MATBEL_CHECK
Check Add-On-Specific Criteria for MM_MATBEL
If it is helpful rewards points
Regards
Pratap.M

User Exit or BADI on saving of Sales order cost estimate (CK51N)

Hi,
Can any one share with me what are the User Exit or BADI that gets triggered on saving of Sales order cost estimate (CK51N).
Regards,
Bijay

Hi
Check the link
Need Enhancement Spot or BADI for transaction ck51n
Regards
Sanil

F110 - Automatic Payment (User Exit, BTE, BADI)

I have requirement after generating payment document by F110 automatic payment. I need to send data to other system.
How to get all payment documents? Can I use a BTE, User Exit or BADI? Kindly help me.

Hi ,
You can create a DMEE or genrate Idoc to another system .
If you want to send excel file then you can create a dmee file in transaction DMEE with same formt provided by bank/ another system .
many Thanks

User-Exit or BADI for MB51

Dear all,
In MB51 report, sale order value is not showing values even though it actually has.
What could be the reason?
If the answer is User-exits or BADI, can u suggest me the correct user-exit or BADI.
I have already tried the following user-exits by placing BREAK-POINT in the includes. But no where the execution is breaking.
MBCF0002            Customer function exit: Segment text in material doc. ite
MBCF0005            Material document item for goods receipt/issue slip
MBCF0006            Customer function for WBS element
MBCF0007            Customer function exit: Updating a reservation
MBCF0009            Filling the storage location field
MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE
MBCF0011            Read from RESB and RKPF for print list in MB26
MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc
Plz give some suggestions.
Regards,
Prem

Hi ,
U need to change the layout of MB51 in order to get the SO no.
goto MB51---> give some inputs ---> in the o/p screen ->click on the variant button-> on the pop screen u, top of it u will get 2 options
1.Header
2.Position
click Position Button ---> here u will get all Fields avail. for this Report O/P , so u can add SO field and save the variant.
regards
Prabhu

How to find the user exits and BADIS from SPRO

Hi all,
please let us know how to find the User exits or BADIS for an application from SPRO.
Regards,
Madhavi

Hi Varisetty,
Finding user exits and BAdis from SPRO can be cumbsersome. In most instances you know the standard SAP program and want to check (find) an exit called in the flow of the transaction. You can do this as follows:
For User Exit:
Put "/h" in the command box (to start debugging)
Execute your transaction
When you enter debugging - put a breakpoint at statement
CALL CUSTOMER-FUNCTION
the control will stop at all calls to User Exits
For BAdi (it's simpler)
Go to class CL_EXITHANDLER in SE24
Enter method GET_INSTANCE
Put a breakpoint in this method
Run your standard transaction - control will stop at all BAdis called within the flow since this method is used to check BAdi implementations before invoking them
Also, if you want to find enhancements by package - go to SE80, enter the package and check function groups starting with X - those contain function exits (conventional user exits). For BAdis in a package, there is normally a separate tree node (under the package) for Enhancements hence clearly identifiable.
Cheers,
Adi

EXIT or BADI to change FAX number in P O Messages at creation

Hi all
Looking for a user-exit or BADI to use to change the fax number of the PO Messages entry during creation/changing. Using SAPscript.
I am on SAP R/3 Enterprise 4.7.
Regards
Boniface

Hi boniface,
You can use User exit : EXIT_SAPMM06E_012, in that there is a I_LFA1 structure and
field TELFX, change customer fax number here.
regards
kallam

Need exit or Badi for updating Warranty data in IE02 while Prod Order conf.

Hi All,
I need a user exit or Badi for updating the Warranty data in IE02(Equipment Master) while production order confirmation(CO15)?
I need to update the Begin guarantee date from Production order and warranty master type in IE02 while confirming the production order.
Thanks,
Sudha

Hi,
Are you saying first create notification,then service order
and then Sales order.
But the requirement is create notification then sales order and when you go in va02 and while modifying the sales order and create service order.
Thanks & regards,
chetan.

User Exit or BADI for Material,BOM,Customer,Vendor

Dear All,
I have requirement where if User A changes a Material X .It should go for approval by workflow.
When the Material X is waiting for approval no other User should be able to change the material .It should give him a message
and restrict him from changing the Material.
Is there any User Exit or BADI to restrict him from changing the material. The exit or BADI should be called as soon as the Material is entered in MM02.
I need exit or BADI for BOM, Vendor and Customer also.
Thank you.

Hi,
You can go to Transaction SE80 and check in Function Group MATF. There have been two User Exits which are called during MM02 Transaction execution (via Analysis Transaction SE30) - MATERIAL_FIELD_SELECTION_NEW and MATERIAL_FIELD_SELECTION_COMB.
BAdI called by FM MATERIAL_FIELD_SELECTION_NEW.
Thanks and Regards,
Prabhakar Dharmala

User exit or BADI for Tcode ME51N

Hi All,
My requirement is i need to check available quantity at the time of Purchase req creation. If PR quantity is available in stock then it should not allow to create new PR.
Is there any user exit or Badi for this requirement. Kindly send me.
Regards,
Paras

Hai,
User Exit: MEREQ001
Function exit             EXIT_SAPLMEREQ_001
                               EXIT_SAPLMEREQ_002
                               EXIT_SAPLMEREQ_003
                               EXIT_SAPLMEREQ_004
                               EXIT_SAPLMEREQ_005
                               EXIT_SAPLMEREQ_006
                               EXIT_SAPLMEREQ_007
                               EXIT_SAPLMEREQ_008
                               EXIT_SAPLMEREQ_009
                               EXIT_SAPLMEREQ_010
Screen exit               SAPLMEGUI
Include tables           CI_EBANDB
                               CI_EBANMEM

User exit or badi for me52n transaction.

Hi all,
i have a requirement to write a user exit or badi for me52n transaction. the requirement is in header section, only one plant should be accepted. that is in the first row one plant will be inserted. in the second row if we are inserting another plant other the first row plant, it should not accept it and it should raise an error.
that is from the second row onwards, every plant should match with the first row plant.
if any part of this issue is unclear, plz let me know so that i can explain it clearly
this is urgent requirement.
please let me know the solution as soon as possible.
points will be awarded.
thanking u in advance.
A.srinivas.

In this version exit EXIT_SAPLMEREQ_005 should exists (look at OSS <a href="https://service.sap.com/sap/support/notes/843446">Note 843446 - MEREQ001: Cannot call up external service data in user exit</a> this note refers to the exit and is applicable in 4.70. Look also at OSS <a href="https://service.sap.com/sap/support/notes/310154">Note 310154 - ME21N/ME51N: Customer-specific check, generating error log</a>
Regards

User Exit or Badi for CN22

Hi All
Can anyone tell me an user exit or badi for Tcode CN22 which gets triggered when i save a network.
whenever i make changes in the WBS assignment of the network in the activity level then the i need to copy dates to other networks whenever a change in WBS element is done. Please treat this as pretty urgent
Thanks
Sowjanya

Hello,
Please check and see if the BADI
"AFABD_CHANGE" suits your requirement
it has
AFABD
Network: Dialog table for AFA
as a changable parameter....
and import parameter as
CAUFVD
Dialog Structure for Order Headers and Items
Reward if helpful
Regards
Byju

User exit or BADI for ME22N

Hi,
I need a user exit or Badi for defaulting Plant at line item level.
The scenario goes like this: when ever user tries to change an existing Purchase order and tries to add a new line item in it, I need to trigger USEREXIT or BADI , so that it reads the previous line Plant and updates the current line with the same plant.
I tried with user exit MM06E005 but it didnt seem to work.
Can any one please help me?
I am new to BADI, so I am not sure how to find the BADI and use it. It would be great if anyone can help me i this.
Thanks
Ramya

Hello
The BAdI ME_PROCESS_PO_CUST is the right one. The method PROCESS_ITEM should be triggered whenever the user changes something in the purchase order at item level and executes any kind of function (e.g. ENTER, CHECK or SAVE).
However, instead of overwriting the user input via the BAdI you should implement method CHECK ( Closing Check ) where you can validate the user input. If any of your validation fails you can send an error message and set CHANGING parameter CH_FAILED = 'X'. This approach is much more transparent for the user.
NOTE: In order to "send" an error message you need to add the include mm_messages_mac to your implementing class. For an example see class CL_EXM_IM_ME_PROCESS_PO_CUST (should be available on ERP 6.0):
METHOD if_ex_me_process_po_cust~process_item .
DATA: ls_mepoitem TYPE mepoitem,
        ls_customer TYPE mepo_badi_exampl,
        ls_tbsg     TYPE tbsg.
INCLUDE mm_messages_mac. "useful macros for message handling
* here we check customers data
ls_mepoitem = im_item->get_data( ).
IF ls_mepoitem-loekz EQ 'D'.
* check field badi_afnam
    IF ls_customer-badi_afnam IS INITIAL.
      mmpur_metafield mmmfd_cust_02.
      mmpur_message_forced 'W' 'ME' '083' text-003 '' '' ''.
    ENDIF.
ENDIF.
ENDMETHOD.                    "IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM
Regards
Uwe

EXIT or BADI to TO01/TO02

Similar Messages

Maybe you are looking for