Exit Required for copy Warehouse Management data into quant

Hi Gurus,
Please refer the exits which are available for warehouse management(lt06,lt12) either in transfer order creation or in confirmation for copy certain field value in quant entry.
thanks.

issue resolved

Similar Messages

How to copy the table datas into an open office excel file .

Hello All ,
I have a form which contains several pages . Each page contains some tables in it . How can we copy each table datas into an open office execl files ??
I mean there will be several excel files each file corresponds to a particular table in the form. I am using LiveCycle Designer ES 2 . in Windows XP.
Thanks
Bibhu.

Hi Bibhu,
Here is a screenshot of exporting the form data to XML:
I have not imported XML into Excel, but I know that Excel 2007 has tools for this in the Developer tab. I don't have Excel 2007 on this machine, so I can't get screenshots. However using Acrobat you can merge the XML file into a spreadsheet, using the same menu Forms > Manage Form Data > Merge Data Files into Spreadsheet.
In addition you can set up a data connection to the spreadsheet. However this will only work in a Windows environment and you need to share the OLEDB data connection with all users. In addition if you Reader Enable the form with Acrobat, the data connection will not work.
So on balance if you want to get data to a spreadsheet I would recommend export XML.
Hope that helps,
Niall

Requirements for SAP Document management system in ECC 5.0

Hi All,
Can any one provide me the requirements for SAP Document management system in ECC 5.0.
SAP Component   ECC 5.0
OS    Solaris 5.9
DB    Oracle 9.2.0.7
Thanks in advance.
Regards,
Surendra
<removed_by_moderator>
Edited by: Juan Reyes on Aug 6, 2009 12:49 PM

That info is available either at http://service.sap.com/pam or http://service.sap.com/quicksizer
Please do some research before posting
Read the "Rules of Engagement"
regards
Juan

BADI or EXIT Required for QM01,QM02,QM03

BADI or EXIT Required for qm01 Create Notification:MCDR-TOOL Screen To Validate DeviceData i/p Field so that the user can enter their LOT NO Correctly .
similarly In QM02 - Serial Number Field And In QM03.
Quick Response is appreciated.

Hi
     " Enhancement QM01   IWO10026                                                                                IWO10027
IWOC0001
IWOC0002
IWOC0003
IWOC0004
        " BADI's QM01
IWOC_OBJECTINFO_CHNG
IWOC_LIST_TUNING
IWO1_SUBSCREEN_0170
IQS_MASS_CHANGE
IQS0_STATUS_MAINTAIN
NOTIF_AUTHORITY_01
WOC_FL_DETERMINE
Thanks & REgards

Can not see warehouse management data screens for material while extending.

I want to extend material for warehouse managment views.I can not see these views for the material in MM01.Looks like this is some thing to do with material type configuration.Can some one assist me how to do this?

1)Check whether the material exist for that plant and storage location which is assigned to warehouse number .
spro->enterprise structure->assignment->logistic execution->assign warehouse number to plant/sloc.
2) Check in OMS2 tcode in the material type setting WM view is selected.

SSM 7.0 - Copy SAP BI data into PAS or Create Dim. Model viewing BI Data

I am using SSM 7.0 with SAP BI. Is there some best practice / direction / comments on making a decision between:
#1 - Duplicate SAP BI data into PAS Dimensional Model
- Create an InfoCube in SAP BI
- Create the model connection required by BI Connection
- Copy the required SAP BW/BI InfoCube information into a PAS Model using the BI Connector
- Create KPIs based on this model connection
or
#2 - Make SAP BI data visible in PAS Dimensional Model (no data stored in PAS)
- Create an InfoCube in SAP BI
- Create a Dimensional Model based on this InfoCube using a Link ID and the SCHEMA commands
- Create a model connection to make data in InfoCube available in SSM
- Create KPIs based on this model connection
My thinking is that if the volume of data is low then not actually having to go to the trouble of duplicating the data in SSM would work well - with the benefit that the information is updated as soon as the SAP BI InfoCube is updated.
(At the moment I have tried #2 but so far not failed to create an KPIs - I am wondering if the Key Figures in the InfoCube need to use a particular naming standard)

Hi Mark,
See the link below for a Best practice document that is available here in SDN. Although you can use queries that already exist in BW, it is usually better to create new queries adjusted to the kind of information you want to provide in SM. There are a few rules you need to follow when creating such queries, but there is actually no naming convention for its Key-Figures.
[Best Practiceu2026 The BI Connector in SSM 7.0|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/701b8da0-3135-2b10-929d-936e43164b06]
Hope this helps!
Ricardo

BADI/EXIT required for FB60 ..

Experts,
While doing entry through FB60, if the payment to the vendor is applicable for TDS (Withholding Tax) and vendor does not have PAN card (J_1IMOVEND-J_1IPANNO is initial for that vendor) then we have to give the error message....
Please suggest the solution for the same......

Hi,
Try to create the validation in the OB28 transaction.
1. in prerequisite enter the tcode = FB60. and create the user exit .
2. you need to create the user exit by copying the program RGGBR000 into Y and Z program and need to configure this program in T80D table.
3. in exit use the structure BKPF, BSEG and write the required logic.

Exit/Badi for Updating Actual Start Date in CJ20N

Dear Experts,
In transaction CJ20N, under Dates Tab for a particular Activity, there is one field viz. Act i.e. Actual start: Execution (date). My requirement is to display PR date in this field. Besides this, Actual finish: Execution (date) should also get updated depending on the Duration field.
I searched all the exits in the package 'CN' and 'CORU', but none of them seems to be useful
Please suggest a user exit/BAdI which could help resolve this.
Thanks in advance

Hi,
That BADI would trigger when you change any thing on the WBS and hit save.
WORKORDER_UPDATE-for network
Regards,
Himanshu

Need a method for importing Palm III data into a Palm Centro

I just bought a Palm Centro (Verizon), with the expectation of importing data from my old Palm III. From the Palm III Desktop, I exported Contacts, Calendar, Tasks, and Memos into separate folders (this was done on a Windows XP PC) and copied the resulting folders & files onto a flash drive. But when I try to import these files into the Palm Centro desktop (on a new Mac Pro with OSX), the backup files are not in a "recognized format." Does anyone have a process for reliably getting the Palm III data into the Palm Centro? Also, is there an easy way to purge unwanted Contacts/Calendar events from the Palm Centro handheld? With all the trial and error, its accumulating a lot of garbage. Thanks...
Post relates to: Centro (Verizon)

Click on the following link for the upgrade guide on kb.palm.com
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=12926
You will need to hard reset the Centro in order to clear out the Centro before sync'ing. Click on the following link for the hard reset procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887
Click on the following link for the support page for your devices on the kb.palm.com webpage.
http://www.palm.com/us/support/centro/centro_vzw/
http://www.palm.com/us/support/palm3/
There are links on the pages to the user guide, troubleshooting, how to's, downloads, etc.
You could try to export the data in each category in Palm desktop, save to the flash drive and import the data.
Click here for the data export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=36288
Make sure you select "ALL" for the range during the export procedure. If you don't, it will only export the currently selected record.
Post relates to: Palm i705

Customization settings required for Extenal service managment

Hi,
Till now we are not using External managment , now we want to confifure this , so what are the settings required for this.
regards,
zafar

Hi,
1. If you are selling the Service , Use Material Type u201CDIENu201D and for billing with SD module ,u have to use MM with HR module like (Time & Material ) ie..Expense recording (PR05) then PRRW and PRFI.
2 .If vendors provide service for you and you can procure the service and pay to vendor.
The configuration required are:
2.1. Define organization status for service category
SPRO u2013>MM-> ESM->Service master- >Define organization status for service category
2.2. Define Number Ranges
SPRO u2013>MM-> ESM->Service master- >.Define Number Ranges
2.3. Define Service Category
SPRO u2013>MM-> ESM->Service master- > Define Service Category
& you can do assignment of cost object ( cost center, project, sales order) with co.code with G/L account in OKB9 t.code and in t.code OBYC account assignment of GBB,WRX with G/L.
***After above you can create Master data as Service master AC03
& the transactions are
A. Create PO ME21N (Acc,assment cat. K or P or C as required and item category D) and enter other detail with service master.
B. Create SES w.r.t. PO in ML81N
C. MIRO w.r.t. SES
D. Payment to vendor in F-53
For more Check the link:
http://sapmm.wordpress.com/category/esm/
Regards,
Biju K

SAP Best Practice document for Extended Warehouse Management

Hi,
Does SAP have any Best Business Practice document for SCM Extended Warehouse Management solution?
Request to please provide me link if any?
Thanks and Rgds,

Hi Reddy,
Thanx for the link but I have a requirement to install the BI content for Quality management to present it to the client. So I need to install as a whole not for a particular requirement.
I want to know do I need to install all the datasources like masterdata and Transactional which are available in RSA5.
Regards,
Santhosh.

Settings required for including changes in data in a transport request.

Hi All,
I need the settings required for saving ths data changed in a database table into a customizing request.
Kindly let me know the steps involved in the process.
To elaborate:
I have a maintenance screen for a DB table.
Whenever a user creates/changes data to/from the DB table , using the maintenance screem, the data should be saved into a customizing TR.
Regards-
Harmeet Singh,

Hi there,
Any config change will be saved under a transport request TR. Also tables are of 2 types: Customizing table & application table.
Changes / new entry in a customized table are transportable. You will gte a TR when the customized table values are changed / new entry.
But application table entry / changes are non transportable. You willnot get a TR when saving the data.
To know it, go to SE11 --> give the table name --> display --> attributes --> Delivery class. Delivery class A is application table, C is customizing table.
Also some standard tables like MARA, VBAK are not allowed to maintain. If a table is allowed to be maintained, table maintaience allowed is checked in the above.
Regards,
Sivanand

Recurring Inspection is required for non batch managed material

Hi Gurus,
My scenerio is I want recurring inspection of material but my material is not batch managed. is there any way around to cater this requirement?
Regards

Without Batch management the reccuring inspection is not possible because if you receive 100 quantity of material A on date X and consume 50 and again you purchase 50 on daye Y and comsume 30 out of it .. Then how the system will know about when to trigger this inspection and for how much quantity..Even you use development the system canot identify the materials got consumed .. If it is serialized material then you can do it by creating the development table and maintaining the receipt date for each serial no and the inspection date...

Data interpreter for loading of DASYLAB data into DIADEM

Can NI deliver a data interpreter for loading DASYLAB data into DIADEM?

Hi zzzz,
It is my understanding that DasyLab has the ability to write DIAdem *.DAT files. This I have gathered from the fact that US customers have sent me *.DAT data files generated by their DasyLab version, in which several properties are called by their German names. So I assume the DasyLab *.DAT file output was originally written for a German audience, but the data made it over just fine. I suppose that could have been a special feature of their particular DasyLab, but check if you can output *.DAT files with yours. If not, please write back.
Regards,
Brad Turpin

What is the formula for automatically entering todays date into Numbers. In Quattro, it was '@today', but I cannot find it in numbers. Thx

What is the formula to automatically enter 'current date' into spreadsheet? In Quattro, it was '@today', but I cannot find it in the Numbers spreadsheet. Thx

201,
Do you want it to update or always show the date when entered?
For updates, use the TODAY() function.
For a static date, use Insert > Date and Time.
Regards,
Jerry

Exit Required for copy Warehouse Management data into quant

Similar Messages

Maybe you are looking for