Exit URL for Integrated ITS

What is the ~EXITURL for the Integrated ITS that calls the screen "End of Session"?
The ~EXITURL is defined on the BBPSTART in SICF.

Hi Shannon, we had a custom html screen in ITS 6.20. This screen was the entry and exit point to related ITS transactions. We recently upgraded to ECC6.0 and the internal ITS. During this upgrade it we discovered that this capability was no longer possible. SAP acknowledged this and created patch level 83 for kernel 700. We were unable to return to a custom screen as a start/exit screen without this patch level installed. This is slightly different then a logoff screen though.
Kevin

Similar Messages

Apache rewrite URL for integrated ITS

Hello All,
What is the Rewrite url for the integrated ITS and proxy pass for the ITS
Below is the one I have and its not working
RewriteRule ^/(sap\(.*) https://sapprd.domain.com:8080/sap$1 [P,L]
ProxyPass /sap https://sapprd.domain.com:8080/sap
Please let me know the correct Rewrite url for accessing integrated ITS using apache reverse proxy. Should I need say /sap/bc/sap/gui/its
Thanks,
Praveen

Praveen,
To reverse proxy to HTTPS you need to make sure that you have the mod_proxy_connect module loaded. Check out http://httpd.apache.org/docs/2.0/mod/mod_proxy.html
Maybe that will help.
Regards,
Keith

List of all service parameters for Integrated ITS

Hi,
I am looking for the complete list of service parameters for Integrated ITS, with explanation about each of them. Ex: ~command, ~sap-user etc. I have tried searching in help.sap.com and in this forum and SDN blogs. I could find only some of them. I am not looking for anything particular right now. If I have the complete list it would help me to refer the list if I need any one in particular.
I would really appreciate if anybody can help me in this search.
Thanks & Regards,
Sudhakar.

Hello Sudhakar,
The best location for ITS Parameter documentation is the online SAP Library at http://help.sap.com/saphelp_nw2004s/helpdata/en/54/4d9993c6592941a407313a6763575c/frameset.htm
Here under "Configuration" you will find a list of parameters for developers and administrators.
Edgar

CIF user exit works for Integration Model only when we De-Activate

Hi Friends,
I have enhanced the CIF User Exit [EXIT_SAPLMEAP_001] and populated the code in Include ZXCIFU14 for calculating the value of Open Order Quantities[OOQ] with respect to Material, Plant and Contracts, PO's then It transfer the OOQ from R/3 to APO.
Here it is Triggering the User Exit and working fine only when we De-Actrivate and Activate the Integration Model thru CFM3.
But In case of PO changes it is automatically calling the User Exit and Trasfer the OOQ from R/3 to APO.
When we change the Master Data it is not triggering the User Exit Automatically.
Could you someone suggest why we required to De-Activate the User Exit when we run the Integration Model every time.
Please suggest if we need to follow any pre required steps and why this behaviour for User Exit [EXIT_SAPLMEAP_001].
Waiting for your answer......Thanks in advance.......
Regards,
M N Kumar

Hello,
Could you please provide details about the master data you mentioned in your query. This exit is called for PO, PR ,confirmation, shipping notificatoin objects.
Rgs- Vikas

ITS Exit URL

Hello,
On the standalone ITS 620 there is a parameter exit_url which can be used to be the screen that is displayed when an IAC is exited (otherwise the classic 'thank you for using the ITS' message is displayed).
My question is, is there a similar option when using the integrated ITS? Currently IACs running on IntITS give a 'You have successfully logged of the WAS' message when quit.
Thanks
Mr.T

Hi tahir
yes u can assign any logg off url for perticular ITS service
go through tcode. sicf->sap->bc->gui->sap->its
select ur IAC service form here double click on it click on edit.
under error page tab u can find another tab logoff page
select radio button redirect to url here u can assign logoff page url created by you. also select the status u want.
regards,
kaushal

Program not working with Integrated ITS

We are calling program SAPLXUSR at log-on and the program is not carrying out the funtions when being used with the Integrated ITS.
This program works correctly with the Standalone ITS but we are unable to execute it using the Integrated ITS. We are using the standard log-on screen for Integrated ITS without the pop-up log-on box.
Additional Details:
Program Name: SAPLXUSR
Package: SUSR
Function Module: EXIT_SAPLSUSF_001
Function Group: XUSR
Enhancement: SUSR0001
Any suggestions?

Release Information:
SAP_ABA     640     0015     SAPKA64015
SAP_BASIS     640     0015     SAPKB64015
PI_BASIS     2005_1_640     0005     SAPKIPYJ65
ST-PI     003C_640     0001     SAPKITLPS1
SAP_BW     350     0014     SAPKW35014
SRM_SERVER     500     0008     SAPKIBKS08
SRM 4.0
The program is executed when the user logs onto the system. Since the log-on screen has changed with Integrated ITS, this user exit is not envoked. The User exit makes entries in tables that are tied to the User ID that is used on the log-on screen. We've turned off SSO to get our original log-on screen back but now the user exit is not being envoked.

Need help on integrated ITS URL format for CIC Account Overview

Hello CCS Experts,
We just upgraded from 46C to ECC 6.0 ( CCS 464 to UT 6.0 ). We used to have external ITS for CIC0 in 46C , Now we are trying to make CIC0 work with Integrated ITS. Our basic Integrated ITS services work , did all the configuration like SICF activation of necessary services ( Including EWB_WEBGUI and EWHV for call center ), publishing sevices to INTERNAL site using SE80 etc... And Test service works fine on all these services.
But when I go to CIC0 and click on Account overview , I get Service Can not be reached. I have checked transaction CICAM and maintained it point to the internal ITS machine with the right port number. But no luck...
The old URL used to be as below for ISUACCOUNTOVERVIEW.
http://dr3-da-1:8001/scripts/wgate/zzewhv_acct_ovw/!?view=ao_isuacct&classid=isuaccount&~okcode=+
My question is how should the URL be changed to work with Integrated ITS , Need specific format. Has anyone had this issue , or can direct me to some customizing documentation.
Thanks
Regards
Venu

Looks like you have a customized overview instead of the standard one. The standard URL looks like this
http://<your.its.url>/scripts/wgate/ewhv_acct_ovw/!?view=ao_isuacct&classid=isuaccount&~okcode=+
Your URL shows "zzewhv_acct_ovw" instead of the standard "ewhv_acct_ovw". See if you have created a custom class based on the standard one.

Alternative for integrating Portal to Sap Webwas 6.20 (without ITS)

Hello
I have a scenario which I should open SAP Transactions from Uwl tasks in Portal, without ITS (as sap Webwas doesnt have embedded ITS).
I get the following error:
iView : pcd:portal_content/every_user/general/uwl/com.sap.netweaver.bc.uwl.uwlSapLaunch
Nome de componente : com.sap.portal.appintegrator.sap.Transaction
Exception in SAP Application Integrator occured: Application URL ':///sap(ZT01VUxMbEJHNHpWWUIzVyUyQjRZWm5lWnclM0QlM0R1NjYlMkZzcklXQ3Z4WXJPV3g5OXVvVnclM0QlM0Q=)/bc/gui/sap/its/webgui' is not valid! Please check the protocol and host entries for system 'R3_SYSTEM'..
Is there any alternative for accessing the SAP Transactions in UWL without ITS?
I tried to change the Uwl XML to call a custom view, but nothing has changed, the result is the same. I changed from:
    <ItemType name="uwl.task.webflow.TS01000096.R3_SYSTEM" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchSAPAction" executionMode="default">
      <ItemTypeCriteria systemId="R3_SYSTEM" externalType="TS01000096" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchSAPAction" groupAction="" handler="SAPIACLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="openInNewWindow" value="yes"/>
            <Property name="display_order_priority" value="5"/>
            <Property name="IAC" value="WS01000060"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
To:
          <ItemType name="uwl.task.webflow.TS90300030.R3_SYSTEM" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchIView" executionMode="default">
               <ItemTypeCriteria systemId="R3_SYSTEM" externalType="TS90300030" connector="WebFlowConnector"/>
               <Actions>
                    <Action name="launchIView" handler="IViewLauncher">
                         <Properties>
                              <Property name="iview" value="pcd:portal_content/myISRDispatcher"/>
                              <Property name="openInNewWindow" value="yes"/>
                         </Properties>
                         <Descriptions default="launchIView"/>
                    </Action>
               </Actions>
          </ItemType>
Thanks

Hi Vitor,
This is not possible.
If you want to call backend transactions you will need to use the ITS: ITS 6.20 for backend releases with kernel 6.20 (and lower) or the Integrated ITS with kernel >= 6.40. SAP notes 709038 and 325616 can give you more information.
Best regards,
Cristiano

ALV GRID and Integrated ITS 7 (SAP GUI for HTML) - dissapears on reload

Hi All,
We have a custom report that uses an ALV grid to display information to the user. Within this grid, there are fields that are display only and fields that are editable. Also, the grid is wider than the screen's width. It works fine in ECC. It also worked fine when we were using ITS 6.4.
We have recently upgraded to ITS 7. Now when we run the report using a Transaction iView (in EP 7) or the Webgui service (SAP GUI for HTML), if a field that is editable has focus when an event is triggered that reloads the grid, the screen becomes blank. So, you can click the Save button and the screen goes blank, also, there are date fields in the grid and if you choose a new date, the grid reloads and the screen becomes blank.
We have found that when the screen is blank, you can use the "Page Up" button on your keyboard and the last few columns of the grid will appear. As if the entire grid has moved off-screen to the left.
If you click onto a non-editable field and refresh or save, the grid returns to its normal state.
We are on Basis Patch level 15.
Does anyone have any ideas on how to fix this?
Also, does anyone know of a standard SAP transaction we can call from the Webgui that would have a similar setup...with an ALV grid containing editable and non-editable fields? We would like to rule out any errors in the report itself. Since it worked before we upgraded and it works fine in ECC. This would be a really big help too.
Thank you so much!
-Kevin

Hi,
Thanks Raymond, I have seen Note 314568. I could not get the second link to work but I have looked at just about every Note in reference to Integrated ITS 7 and Tables or ALV Grids and there are very many, so it would appear that SAP has had a hard time with implementing this control, but I have not seen any instance that matches the problem we are having.
Unfortunately, SAP will not investigate this unless we can provide a standard Transaction that exhibits the same behavior.
If anyone knows of a standard SAP Transaction that displays an ALV Grid that is wider than the screen (requiring a horizontal scroll bar) and with editable and non-editable fields, that would be fantastic. If we can test against that, then we would know for sure if this is a problem with ITS / SAP GUI for HTML, or if there is an issue with this specific report.
Thanks!
-Kevin

Integration Server URL for HTTPS

I want to configure SSL for our PI 7.0 system. I have:
- Configured SSL on the Java Stack and tested it. It works fine.
- Configured SSL on the ABAP and tested it. It works.
I know to enable HTTPS I need to change the following exchange profile parameter:
com.sap.aii.connect.secure_connections = messaging
I think I need to change the J2EE server
SAP XI AF CPA Cache to register with the http/https ports and the Fully qualified domain name (so to match the SSL Certificate).
The big question is:
Do I need to change the URL for the Integration Server (in the business system in the SLD)? For example:
https://<hostname>.domain.com/sap/xi/engine?type=entry
(where https is the default 443 so I don't have to specify the port).
Or can we just leave that as the default HTTP connection as below?:
http://<hostname>.domain.com/sap/xi/engine?type=entry
Any help is greatly appreciated since I don't have access to a sandbox and it is trial and error (with developers needing to use the system). Thanks!

I agree with Silvia here.
The entry can continue to point to the default port / default URL of the Integration Server as you would need to authenticate only the end point and not internal XI calls.
Also, if I remember correct, the SSL port is always one port higher than the default port both for J2EE and ABAP stack.
@Silvia : Nice to see ppl from SAP (especially the author of CTS+ article ) contributing on the XI forums. Need more people like you here
Regards
Bhavesh

How to use the integrated ITS server in WAS6.40 for WEBGUI

Hi,
I am testing the Portal 6.0SP6 on WAS6.40SP7.
Using User Mapping, I am able to connect and call some transaction to R/3 System (4.6c) and the ITS servers for the R/3 system. If I am going to use webgui to call a transaction, do I need the ITS server at all? The reason I asked because I thought WAS6.40 came with an embedded ITS server.
If I can make use of the integrated ITS server, how do I configure the system connection?
Thanks,
Edmond wong

I have read the past posts, but I am still not clear... We are implementing mySAP ERP 2004. This will include ECC 5.0 and EP 6.2.
We currently have R/3 4.6C and EP5.5. From EP 5.5 I have users executing R/3 transactions directly from EP using the standard Master iView. This traffic goes via the ITS virtual instance for the R/3 system.
I am trying to decide if I need to setup a separate ITS to continue to do what we do now OR if the direct call of a transaction from EP6.2 using the SAP supplied Master iView can be accomplished using the Internal ITS on ECC 5.0. We do not have the DEV systems set up so I cannot test.
Any comments?
Thanks,
Rich

Integrated ITS in a Separate App Server (DI) for Security and LoadBalancing

Hi Experts,
I have a specific requirement for ITS Configuration.
1. Production Server ( CI + DB ) -> Existing
[ ERP6.0 ]
OS : Solaris 10
DB : oracle 10.2.0.2
H/W: PRIMEPOWER650
Unicode Enabled
2. Application Server ( DI ) --> to be made ( and to be used exclusively for Web users)
OS : Windows2003 sv
H/W: RX200 S3
x64
MEM: 8GB
No. 1 is existing Production Server Environment.
The Customer Requirement.
The Customer wants to use the ITS . But he doesn't want the existing Production Server to be disturbed for the same for 2 reasons. [ Security and Load Balancing ]
We are planning to create a Separate Application Server (DI) to work as ITS.
As the Kernel is 700. The ITS is integrated into the Production Server by Default.
We have written to SAP and have asked whether the Production Server ITS can be disabled and the Separate DI's ITS be enabled so that the NEW ( No.2 ) Application Server will be used for ITS activities.
SAP has replied saying the Integrated ITS cannot be disabled at the Production Server. Instead as an alternative we can create a Logon Group (using transaction SMLG) and divert all the Web users to the Separated DI (No.2). We have decided to go according to SAP.
Now I have the following questions :
1. The Operating Systems of the Production Server (No.1) and the Separate AP (No. 2)
are different. ( Are there any complexities involved or must do points to be taken care. )
2. Brief / MUST DO tasks at the Production Server Environment and Must do tasks at the DI Environment.
I hope someone has already done some few installations on the above combination, if so, request to please share me your ideas.
Thanks in anticipation
Best Regards,
Paguras
PS :
my earlier discussion on the same topic on this community.
ITS Specific Requirement

Hi Markus,
Thanks for the Reply.
We have the following 2 plans :
Plan-01.
As you have advised, we will try to disable ITS of CI and enable ITS of DI.
Plan-02.
If Plan-01 could be worked out successfully, well implement as per SAP suggests. Creating a Logon Group and divert all the web users to the DI alone.
To deactivate ITS on CI, you have mentioned to make sure, that the system does not listen on the HTTP port (transaction SMICM) on the Servers
BTW, I have seen a parameter called <b>ITSP/ENABLE</b>. if we deactivate this parameter at CI & DB and then activate the same parameter at DI.
My questions to you :
1. Shall we go for Plan-01 ignoring what SAP OSS has said. ?
2. Disable ITSP/Enable Parameter -> CI & DB
Enable ITSP/Enable Parameter -> DI has to be implemented .
Thanks & best Regards,
Paguras
PS: Sorry for always pounding you with so many questions on the same topic.
SAP Help on ITSP / enable parameter
itsp/enable
You use this parameter to deactivate (0) or activate (1) the integrated ITS. Even if the integrated ITS is activated, it only accesses system resources when it is actually used. Nevertheless, it can make sense to deactivate it to prevent users from accessing the SAP system with SAP GUI for HTML via special application servers (such as batch or update instances). Since the conversion of SAP screens into HTML pages uses additional CPU time, it makes sense to reserve a number of dedicated application servers to be used with SAP GUI for HTML and to use a special logon group to balance the load between them.

Configuring Integrated ITS for other browsers?

Is there a enhancement package or anything else provided by SAP to allow other browsers like Safari, Chrome, Opera and etc... to work with Integrated ITS w/o getting the ugly ITS error page saying the browsers is not supported?

Hi,
you can turn off the browser check in SAP ITS as it is described in note Note 972116 - Integrated ITS, browser invalid/not supported
by adding parameter ~USERAGENTCHECK 0
Bets regards, Artem

Log off problem in integrated ITS

Hi,
our cancel button for ending the application with an external ITS works fine and the exitURL which is deposit in the service file will be shown.
But with an integrated ITS it doesn't work. I know that this exitURL doesn't work in an integrated ITS.
So I left a redirect URL in the SICF > ErrorPages > Log Off Page > Redirected URL
but nothing happens after clicking the cancel button. The browser works and works but the old screen is still seen. What's wrong? Why the page will not be redirected to given Url?
Can anybody help me?
This works:
wgateURL(~command="logoff", ~exitURL="http://www.sap.com")
but we need a standard exit like described above and I think the way above should be right.
Thanks, Susanne

This was discussed recently.
check out this thread
Close the IE page on click of a button in the transaction
Regards
Raja

ABORT_MESSAGE_STATE when calling transaction via integrated ITS

Hello experts,
we use ECC 6.0 (and therefore Netweaver 7).
I try to start a customer transaction via integrated ITS on our consolidation system with the following link.
http:// ...   :8080/sap/bc/gui/sap/its/webgui/!?~transaction=ZCO16&sap-client=200
In our dev system all works fine so far. But in consoloidation I get errors showing in the browser after logon:
Error when processing your request
What has happened?
The URL http:// ...   :8080/sap/bc/gui/sap/its/webgui/! was not called due to an error.
Note
The following error text was processed in the system Q01 : System error
The error occurred on the application server asapt02sv1_Q01_00 and in the work process 1 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPMZCO002
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system Q01 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server asapt02sv1_Q01_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server asapt02sv1_Q01_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 200 -u: IE121 -l: E -s: Q01 -i: asapt02sv1_Q01_00 -w: 1 -d: 20080111 -t: 165033 -v: ABORT_MESSAGE_STATE -e: System error
HTTP 500 - Internal Server Error
SM21 says:
16:37:04 DIA 001 200 IE121   ZCO1           W0 1 ITS, User session terminated
long message:
ocumentation for system log message W0 1 :
he user session has been terminated after an error in the log
onversion from SAPdiag to HTML. Look in the preceding syslog entries to
ind the cause of the error. For more error details, refer to the trace
iles.
16:37:04 DIA 001 200 IE121   ZCO1           D0 1 Transaction Canceled ITS_P 001 ( )
long message:
The transaction has been terminated. This may be caused by a
termination message from the application (MESSAGE Axxx) or by an
error detected by the SAP System due to which it makes no sense to
proceed with the transaction. The actual reason for the termination
is indicated by the T100 message and the parameters.
The tracefile of the work process says:
========================================
W Fri Jan 11 16:37:04 2008
W      *** ERROR => julep: PpioCreateParseTree: IRepRetrieve(templates/system/header.html) failed. [w3xxppio.cpp 1184]
W      *** ERROR => julep: PpioCreateHtmlPP: PpioCreateParseTree(templates/system/header.html) failed, rc=0x10c [w3xxppio.cpp 985]
W      *** ERROR => julep: XIntInterpret: PpioCreateHtmlPP(templates/system/header.html) failed, rc=0x10c [w3xxjuce.cpp 529]
W      *** ERROR => xgdk: MsgtBuildHtmlBlock: IntpDoInterpret (templates/system/header.html) failed, rc=0x2101 [w3xxmsgt.c   220]
W      *** WARNING => diag: SemgXGHandleResponse: Returning rc=0xffffffcc [w3xxsemg.cpp 1490]
W      *** ERROR => plugin: XKrnHandleResponse failed rc= -52 [itspxkrn.cpp 764]
W      *** ERROR => plugin: ItspXKrn_HandleResponse failed. 700000840333ba0 rc: 0 [itspxkrn.cpp 391]
W    *** ERROR => ipl_ConvertOut failed rc = 1, send icf error page [itsplxx.c    1526]
M    ***LOG W01=> [itsplxx.c    1527]
W    *** ERROR => ipl_ConvertOut returns 1(ITSPE_FAILURE) [itsplxx.c    1529]
W    *** ERROR => Raise Last error:[1 from: itspxx.cpp :817] [itsplxx.c    1216]
W    *** ERROR => RaiseError(sapdext) ITS_P:01 [itspxx.cpp   817]
==========================================
I don't have any dumps.
Please help. Thanks in advance.
Frank

Hello Ruchit,
> Publishing is done via SE80 but may be it may not be needed. But you can try that out as well.
Please advise. How do I this precisely?
> Try this. Deactivate your SICF completely in consolidation system and then reactivate
> it. After that give this a try.
All services have been activated now (after deactivating first) but I have still the same symptom.
> Also when you are trying to execute this customer transaction just compare the urls you
> are getting in development and consolidation. I guess there is an issue with the
> url you are getting.
I get exact the same URL after (except the hostname of course):
http:// ... 8080/sap/bc/gui/sap/its/webgui/!?sap-system-login-basic_auth=X&sap-client=200&sap-language=EN&%7Etransaction=ZCO16
Regards.
Frank

Exit URL for Integrated ITS

Similar Messages

Maybe you are looking for