Exit variable with $

Hi,
What is the meaning of aexit variable with a $ sign in front ot it?
Thanks

hi Will,
i think you mean authorization variable via user exit
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1b439590-0201-0010-ea8e-cba686f21f06
hope this helps.

Similar Messages

Populate user exit Variable with User Authorizations using ABAP?

Hi, Does anyone know of a way to populate a user exit variable (with ABAP) with the Authorization Values for a user running a report? I am turning off authorizations for our InfoProvider using RSSM and want to populate a variable instead and use the variable as a filter.

Hi Kenneth ,
You need dynamic authorization in your report .This can be done at query runtime by using exit variable and writing cmod code for the same .
This code will read authorization maintained at runtime of query in i_step = 1 and will pass input var values accordingly .
For step by step information you can access this document .
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0f9f33c-0f17-2d10-d3a2-ae52ccd00780?quicklink=index&overridelayout=true
Hope this will be helpful .
Regards,
Jaya Tiwari

Map the user exit variables with the queries/cubes using them

Hello Friends,
What are the post unicode conversion tests that you can perform on front end/existing queries?
is there any added advantage for queries due to unicode?
is testing the working of variable enough? is there any table to map the user exit variables with the queries/cubes using them?
Thanks
Tanya

Guys, any clue about this? Answer are appreciated.
Thanks
Tanya

Customer exit variable with exclusion

Hello all, anyone know why a customer exit variable cannot exclude values ?
I've tried with multiple, single and interval without success (it give me a generic error in the customer exit for my variable).
Only the "selection option" mode seems to be enabled to exclude values (also in debug mode with rsrt transaction).
Unfortunately, I cannot use selection option (because this exclusion is an integration of pre-existence selection on a complex structure).
We have SAP BW 3.1C, with SP16. I've looked for sap notes but nothing about this problem (may be a limit).

Now I post my code. The variable is a "Multiple Single Values", optional, not "Ready for Input".
This is my code.
DATA: L_S_RANGE TYPE RSR_S_RANGESID.
If I_STEP = 2.
 CASE I_VNAM.
 WHEN 'ZXXXXX'.
 clear l_s_range.
 l_s_range-sign = 'E'.
 l_s_range-opt = 'EQ'.
 l_s_range-low = 'xxxxxxx'.
 append l_s_range to e_t_range.
 ENDCASE.
ENDIF.
The query raise an error (generic error on customer exit).
I've debugged the code. Error has raised from plausibility_check on RRS_VAR_VALUES_EXIT_AFTER. The following is the code that raise the error.
 CASE i_vparsel.
 WHEN rro04_c_vparsel-param
 OR rro04_c_vparsel-multiple
 OR rro04_c_vparsel-table.
 IF <l_s_range>-sign <> rs_c_range_sign-including
 OR <l_s_range>-opt <> rs_c_range_opt-equal.
 PERFORM raise USING rs_c_false g_c_ue_invalid_range
 i_vnam space space space.
 ENDIF.
From this code, it seems that with multiple selection we only have sign including and option equal.
What do you think about ?

Bex Exit variable with workbook

Hi experts,
I've defined a query that uses an exit variable which select a specific range of customers.
When I execute the query the variable is populated with correct values.
Then I saved this query as workbook; but when I execute the workbook, the selection is not taken into account; it's as the exit is ignored.
When executing the workbook I 've got an information message as follow:
"The Can be changed in query navigation property has been set for variable VACLCONSID, characteristic 0BILLTOPRTY. However, the variable is used in the query in such a way, that the system is unable to apply this change-option"
But in my query definition for VACLCONSID, flag "can be changed in query navigation" is't checked.
Moreover I can't debug exit ZXRSRU01 with a workbook.
Any ideas
Thanks in advance
Thierry

Hi Radha,
thanks for your reply.
My exit variable depends on a customer variable which is filled during variables screen processing
User selects a period, and exit defines customers selection with this information
I use i_step= 2 in exit ZXRSRU01
No other parameters are filled in the workbook by user
Regards
Thierry

Exit variable with multiple values or with ranges

Dear Experts,
I have a date exit variable used in a planning level. If the variable has a single value, I am able to execute the planning function. But if the exit is populated with a range or multiple single values, I am unable to execute the planning function. I get this message 'Variable "ZXPRDATE" is not restricted to a single value'.
I should be able to read all records from the cube in date range of one week for repost. Please advice if this is possible.
Thanks,
Gnana

Hi Mayank,
Yes, I am using the same variable for repost function also.
Let me explain in detial.
Req: I have a planning level with product, effective date and count(keyfigure). I want all products that has a count keyfigure value for the last one week.
If my effective date is a single value, I get all the list of products on that particular day. But, if my effective date has multiple dates or a date range, nothing is read from the data base.
Please advice.
Thanks,
Gnana

Displaying Customer Exit Variable with derived value from another ODS

Hi All,
Sorry if this question has been answered before. I searched the forums and could not find anything specific to my problem.
I am new to BEx Query. Customer is requesting a variable(s) be created which will be displayed as a column along with other CKF and RKF. This query is a payroll query for US/Canada. This new variable will be based on the user input date for the query. We are to take this date and go look up the actual pay date for the pay period to which the user input date belongs. The pay date is stored in another ODS.
So far, as far as the changes to the Customer Exit ZXRSRU01 are concerned, I would perform the logic when I_STEP = 2. Do a basic selection off the second ODS, derive the pay date, and store in range table E_T_Range.
The data displayed off the user input date is displayed in rows. This is done six times, going back seven days for each row (first row is data for period user entered date to user entered date - 7 days; second row is data for period user entered date - 7 days to user entered date - 14 days; etc ...). For this to happen correctly, I am assuming the variable(s) are to to have characteristic types 'Not ready for input', 'Mandatory', 'Customer Exit', and 'Single Value'.
My question is ... How do I display the six variables in columns (how are they to be defined in the query) and the characteristics I list above, are they correct? Does this need to be a replacement path variable?
Thanks.
Edited by: Amir Hasan on Jun 11, 2009 6:24 PM
Edited by: Amir Hasan on Jun 11, 2009 6:25 PM

Hi Amir,
What i can understand from u r requirement is you want to few columns that will show something like below,
User entered date = x
Period of X to Period of (X-7) Period of X to Period of (X-14).....
This can be done by CMOD for variable only.
Logic steps :
1) Take the user input.
2) Find out the period by using T009B table and store in temp variable.
3) Do day -7 and find out period for the same
4) Assing period of X to ls_range-high range and X-7 to ls_range-low.
Let me know if you have any doubt
Regards,
Viren

Change customer exit variable in selections over Dropdownbox

Hello Experts,
we are on NW2004s, SP12.
I have a customer exit variable (0CALYEAR) in two columns. In the first column the customer exit variable and in the second column the customer exit variable with an offset -1.
Now I want to change the year in a dropdownbox. Under <=BW3.5 that was not possible, only over a how to paper.
I can fill the dropdownbox in the web template but when I change the year, it jumps back to the year selected by the customer exit. How can I change the variable in the new web application designer (2004s) during the navigation? Has any one experience with such a problem?

Hallo Frank,
how can I change the variable values in the WAD?
The parameters of the variable: mandatory, customer exit, reference characteristic: 0calyear, single value, not ready for input.
My coding:
DATA: l_s_range TYPE rsr_s_rangesid.
DATA: i_s_var_range TYPE rrs0_s_var_range.
DATA: i_calyear(4) TYPE c,
 i_duedate(4) TYPE c.
IF i_step = 1. " Variable nach Selektionsbild bearbeiten
 READ TABLE i_t_var_range
 WITH KEY vnam = 'CALYEAR_X01'
 INTO i_s_var_range.
 i_calyear = i_s_var_range-low.
 i_duedate = '0210'.
 IF sy-datum+4(4) GE i_duedate.
 i_calyear = sy-datum(4).
 ELSE.
 i_calyear = sy-datum(4) - 1.
 ENDIF.
Rückgabetabelle füllen
 CLEAR l_s_range. " Range-Tabelle füllen
 l_s_range-low = i_calyear.
 l_s_range-sign = 'I'.
 l_s_range-opt = 'EQ'.
 APPEND l_s_range TO e_t_range.
ENDIF.
Thank you for your fast reply!
Regards
Jens

Restricting Charecterstic using customer Exit variable

Hi Experts,
Please adivise how can I restrict values of a charectersitc Infoobject using a customer exit variable.
I have a InfoProvider which has a authorisation values from which I have to retrieve the authorisation values.
Regards,
Koka.

Thanks for the reply Bhawani, I have a function module to fill the Customer exit variable with the values retrieved from DSO.
Can you please explain me the second step mentioned or can I direclty call my FM in the Include ZXRSRU01..
WHEN 'XXXX '. ( customer Exit varaiable)
      CALL FUNCTION 'ZBI_LOAD_AUTH'
        EXPORTING
          I_AUTHVALTYPE = 'auth value'
        TABLES
          E_T_RANGE     = E_T_RANGE.
Regards,
Koka.

IP: Exit-variable multiple single values

Hello,
I have a question to Exit-Variables in IP. I'd like to fill an Exit-variable with several single values, e.g. A, D, G. At the moment I could transfer only one single value, e.g. A, with following coding:
l_example TYPE CHAR VALUE 'A'.
l_s_range-low = l_example.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO p_t_range.
How could I change the coding for transferring several single values?
Many thanks for your help.
Friedrich

Hi,
take whatever values you want to populate into one internal table l_example. Then loop over this internal table.
Loop at l_example into wa_example.
l_s_range-low = wa_example-value.
l_s_seqno = sy-tabix.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
insert l_s_range INTO TABLE p_t_range.
clear wa_example.
Endloop.
Hope this works.
Regards,
Bindu

Current Workday SAP EXIT variable not aligned with correct work days

Hello,
I am trying to use the Current Workday variable within a report so that the data will only be refreshed when the calendar day is Monday - Friday. Users look at this report every day, but when they get the report on Monday we would like for the date to be restricted to the previous Friday, and then switch back to Monday's date when they view the report on Tuesday. In order to do this we have placed the Current Workday variable from the Calendar Date characteristic with an offset of negative 1, but it is showing Sunday's date when they look at the report on Monday.
My questions are:
-Does this variable use the factory calendar that can define the work days?
-If so, which Factory calendar does it use? I have gone to the Tcode SCAL but I can see there are many different factory calendars and I have no idea which calendar this variable pertains to. I have also transferred the global settings for the factory calendar from the source system, and I see no change within the variable.
-How can I see the program name behind this SAP Exit variable? My thinking is that I could at least look at the code to see if perhaps I can find out the factory calendar ID the variable refers to from there.
Any help on this would be greatly appreciated! Until this is fixed I have to manually adjust this report every Monday and Tuesday morning!! Not ideal.

Hi Kelly,
I am not sure whether this can be done by an SAP Exit variable.
But you may try this using a Customer exit variable by using the Function module DATE_COMPUTE_DAY.
The function module "DATE_COMPUTE_DAY" will return the day by 1 to 7 when you input date.
Monday : System will return value = 1
Tuesday : System will return value = 2
Wednesday : System will return value = 3
Thursday : System will return value = 4
Friday : System will return value = 5
Saturday : System will return value = 6
Sunday : System will return value = 7
So input sy-datum to this FM and find the number of day. If it is Monday, the number will be 1.
If output is 1, then offset date by -3 to that of Friday, else offset by -1 to previous day.
Hope this helps,
Regards,
Hari

Problem with customer exit variable in BeX Query

Hi All,
We have created a customer exit variable in a query and populated with few patterns in customer exit.
My query has to bring all the records where the address line is containg the patterns passed through customer exit. Here the query is not working as expected.
It is bringing the values where the address line is exactly same as the pattern and not bringing the records where the pattern is part of the address line.
For example: Pattern passed in customer exit = 'HOSPITAL'
The record where address line = 'HOSPITAL' is shown in the rpeort, where the record with address line = 'HOSPITAL ROAD' is not shown in the report.
I would appreciate your help on this.
Regards,
Rakesh

Hi Diogo,
Below is the code I am using in the customer exit.
SELECT * FROM zae_tt_pbuild INTO TABLE gt_pbuild.
      IF sy-subrc = 0.
        LOOP AT gt_pbuild INTO gs_pbuild.
          CONCATENATE '*' gs_pbuild-pbuild '*' into lv_pattern.
          ls_range-low = lv_pattern.
          ls_range-sign = lc_sign_i.
          ls_range-opt = 'CP'.
          APPEND ls_range TO e_t_range.
          CLEAR: ls_range,
                 lv_pattern.
        ENDLOOP.
      ENDIF.
     ENDIF.
I have tried using '%' instead of '*' aswell but the result is same.
Thanks,
Rakesh

BW Authorizations - Query variable with processing mode as "customer exit"

Hi,
Iam new to BW authorizations and have not yet worked on customer exit before. I was going through the documentation at various sites but I could not get the end to end description on how the query process( when using a variable for an InfoObject) works in case of customer exit.
Let's assume that I am using a query variable with processing mode as "customer exit" and at the exit I write some code to extract user's authorizations from a z table. if this is the case, then when an end user runs a query,how will the the system know what value needs to be filled in the variable for the requesting user. Are the user details also sent to the code along with the query variable? If so how. If I mis-understood the process then forgive me and let me know the correct process.

Hi!
welcome to SDN!
customer exit variables need programing by user. so if you create a customer exit variable, you got to right a program which extracts values into this variable. we can do what ever we want in program, SAP will not deal anything ´with customer exits.
with regards
ashwin
PS n: Assigning point to the helpful answers is the way of saying thanks in SDN. you can assign points by clicking on the appropriate radio button displayed next to the answers for your question. yellow for 2, green for 6 points(2)and blue for 10 points and to close the question and marked as problem solved. closing the threads which has a solution will help the members to deal with open issues with out wasting time on problems which has a solution and also to the people who encounter the same porblem in future. This is just to give you information as you are a new user.

Problem with customer exit variable that is input ready as well

Hello all,
I'm facing an issue with a customer exit variable that again has been defined as input ready. I'm not sure why it is working incorrectly and I#m wondering if this is a bug or if I do s.th. stupid.
The problem is that in the exit program ZXRSRU01 this varibale does not go into the program code I have prepared for this variable. I have added entry points for all three i_step values 1,2,3, but the code will never be touched and in debugging I can see that it simply pypasses the code for this variable.
I have tried to enter a value or to leave it blank, no difference.
When I run another test by just using a customer exit variable w/o input ready capability, then I have no issue, the exit does exactly what I have coded.
Does this mean, that a customer exit variable along with input readiness dows not work ?????
You may ask why I need this variable. Well, my intention is to use the input value of this variable A to derive other values for a complete different variable B. Afterwards I want to erase the input given into variable A to have it blank.
Any comments are appreciated
Thanks

Hi Heiko,
I assume A & B variables are defined on different Characteristics. If you wish to derive B based on A, you can create the Query Characteristic Restriction on B & have a dummy RKF restricted on A whose processing is by Manual Input; where processing of B is by Customer Exit. In istep 2 you can check for B, read A & derive B. There would not be a need to blank out A since the Query would not be restricted on A - you can hide the dummy RKF from showing in the output. Just a thought.
--Priya

Webi Bypassing BEx Authorization Variable with SAP Exit

BEx query has Hierarchy Node Variable with Authorization as processing type. Its set as User Input ready
When the Webi report is refreshed, the LoVs appear as per the Authorization. However, if user doesn't select any value (pushes from right to left in variable screen) he gets NOT_AUTHORIZED error. Which is not intended, it should check the authorization in the background via SAP exit and populate the result. This is how it runs inBEx query.
However, in Webi it's giving NOT_AUTHORIZED error? This is how the product is designed to work or is it a bug.
I see several forum threads and SAP KBAs/notes but they are not answering my question. Could anyone please help.
I am ready to provide more details on this error.
Thanks,
Tilak

Hi,
this is how authorization variable would work in any of the clients and not just Web Intelligence.
You created an authorization variable which is configured as "read for input", so the user is getting prompted.
So In Web Intelligence the LoV shows up.
if the user does not select a value, then you are not sending a value, so you basically asking for all data and you are not allowed to see all data and therefore you are getting the message "no authorization".
if you are making authorization variables as ready for input then the user needs to select the proper values - regardless of the BI tool.
if you want the authorization to be check in the background then the authorization variable should be configured to not have ready for input.
regards
Ingo Hilgefort

Exit variable with $

Similar Messages

Maybe you are looking for