Exiting out of X causes sync issues.

Hi all,
I've just installed Arch onto my laptop and after a couple of hours I realised I couldn't get X to run because xf86-input-mouse and xf86-input-keyboard weren't installed when I installed the xorg suite, I found that odd...
Anyways, X runs fine but when I exit back to the command line the screen is flickering, probably due to hsync and vsync issues; and I have to reboot to fix it. I have a Dell XPS M1210 and I'm running the nvidia driver.

hurbie8, 
I certainly understand why those issues would be annoying. I searched our resources and I have not heard of either of these issues as known issues after the update. It sounds like you are having an issue with the back arrow itself. To take a screenshot, you would press and hold the back arrow, then press the power button. So the phone thinks you are pressing the back arrow, and that's what causes the phone to take a screenshot. When your phone exits out of applications, do you get an error or does it just go back to the main screen? Do you have any installed task killers that are set to auto kill apps? If so, I would suggest removing.
I would recommend doing a factory reset for this issue. A factory reset will erase all data on your device and set it to factory default settings. It will not erase anything on your memory card. You will need your Gmail address and password to setup your device again. I would also suggest creating a backup of your contacts just in case they are not all in Gmail or backup assistant. You can save them to your memory card by going to Contacts>Press the Menu button>Import/Export>Export to SD card. You complete the master reset by going to Settings>Privacy>Factory Data Reset>Reset Phone. 
Please let us know if this resolves your issue or if you need further assistance. 

Similar Messages

  • My macbook pro keeps freezing and shutting off when I am browsing the web on Safari.  How can I figure out what is causing this issue?

    For the past few weeks my computer will slow down when I have been on Safari for awhile, then freeze, and then just go black.  I have to press the power button and then it goes to a black screen with the apple logo and a loading bar underneath when it reboots.  I'm not sure what is causing the issue, but on my previous mac it would have an error message if something like this happened that I could submit.  Any suggestions of where to start to solve this issue?
    Thanks!

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the BOOT_TIME log message that corresponds to the last boot time when you had the problem. Now clear the search box to reveal all messages. Select the ones logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
    If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Some private information, such as your name, may appear in the log. Anonymize before posting.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • New Apple ID email has caused sync issues between iPad and iPhone

    I changed the email of my Apple ID and made sure to save photos and delete old iCloud backups. The calendar noon get syncs but instead eats any new events. Photos from my iPad appear on my iphone but it doesn't work the other way around. Instead my iPad still has an iCloud photo album from my previous Apple ID email. I've made sure that my email is updated on both devices and that everything syncs to iCloud and has been recently backed up. I even deleted the new backups and did it again. I turned off photo steam and turned it back on. Any help would be greatly appreciated. One more detail, even in iTunes, I do not have photo albums being synced from my computer. I just have photo stream with iCloud.

    I'm not sure what caused the issues but backing everything up and restoring both devices has fixed photo stream as well as notes/calendar icloud issues. It even syncs to my computer again! The icloud photo album from the old apple id email is also gone.

  • Import of mp3 file suddenly causing sync issue with existing files. CC 2014

    Hi all,
    I imported an mp3 audio file and dropped it into my comp which contained other Video (422 ProRes) files that contained audio.  When I RAM Previewed the audio for the entire comp slowed down and fell out of sync.  I can't seem to find any way to correct this.  I have tried both Comp Settings and Interpret Footage but I can't seem to find a fix.  Anyone know of (or have experienced) this issue and know of a fix? P.S. I know mp3 files are not optimal for use, but I used it anyway, and have in the past without issue.
    Thanks,
    JB

    After rendering out two sequences that had the audio sync/slowing issue, it appears that this is an issue with RAM preview. The renders' audio are in sync and play at the correct speed.  The issue of the RAM preview remains.  It seems like a bug at this point.  I updated to latest (13.2) version of AE CC 2014, reopened project, RAM previewed the comp and the audio was playing correctly.  I RAM previewed again immediately again, and after a spinning beach ball, it plays back out of sync and slow again.

  • Compressions causes syncing issues

    My exported MOV is fine and synced
    when i compress to DVD Best through compressore
    the audio becomes strangely out of sync but what seems to be about 5 frames
    does that make sense at all?
    Thanks in advance

    Hey niclagi,
    Thanks for the question. I may be able to save you the headache of re-configuring your device without iTunes Match. When I travel outside of the country, I simply turn off “Use Cellular Data” in Settings > iTunes & App Stores. This, along with turning off Cellular Data and Data Roaming should help you accomplish your end goal of ceasing cellular use while out of the country. Any music that you downloaded from iTunes Match prior to leaving the country will still be available for “offline” listening.
    By default, when you add an iOS device to iTunes Match, the option to download over a cellular network isn't enabled. To enable downloading over a cellular network for iTunes Match, choose Settings > iTunes & App Stores > Use Cellular Data > On.
    iTunes Match on iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT5637
    Additional Information:
    iPhone and iPad: Using cellular networks while in another country
    http://support.apple.com/kb/HT1807
    Thanks,
    Matt M.

  • Updating to 6.1.3 causes Sync issue

    After updating to 6.1.3 now the sync starts and then generates a warning that the connection has been lost, even though it is plugged in via USB. Same goes for wireless sync, same error.
    Also noticed, that when I first connected it thought I only had 6GB free, 2nd re-connection was 15GB free, 3rd connection was accurate and back to 27.41GB free.  However when trying to sync it will jump to an error message of, "Over capacity by 351.1Mb", then the lost connection error message appears.
    Finally managed to get it to sync of a 4th USB re-connection, so this upgraded version is really buggy for one of my iPads (version 3).
    Is this a known bug?
    Cheers

    Hello Kimble,
    I'd recommend walking through the steps outlined in the following article.
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS3780
    Cheers,
    Allen

  • My vertical scrollbar sometimes resizes my window, and I have to exit out of Firefox when this happens. Why?

    Sometimes, when I try to move my vertical scrollbar up or down, the entire window will shrink or expand, and the only way to make this go away is for me to exit out of Firefox and then re-open Firefox. It seems to happen randomly, and often happens several times a day.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Anyone noticed Quicktime 7.4.5 causing out of sync issues for online vids?

    Since 7.4.5 all Quicktime video clips I view online in Safari have audio out of sync with the video (by perhaps four frames). Anyone else seeing this?

    I do not use Safari. However, I have no problems w/out of sync issues using the +latest versions+ of FF, Camino & Netscape.
    Have you tried other browsers to rule out Safari as being the culprit rather than QT? Are you using the latest version of Safari?
    What troubleshooting methods have you tried to resolve your issue? Need this info to avoid the +"been there done that"+ senareos.

  • A/V out-of-sync issue for FCP captures

    I've read many of the out-of-sync posts on this board, most of which seem to indicate that the problem is usually caused by either dropped frames, bad timecode breaks, edit errors, or disunity between FCP capture and sequence settings, compared with audio sample rates for the underlying files.
    My files, shot on my Panasonic AG-DVX100A in 24pa mode, result in perfect (except for the anamorphic screen size - see my next post!) Quicktime movie files, in perfect sync. It's only when I create clips from those files in FCP that the video and audio go out of sync. And the out-of-sync drifts; that is, the further you go in the clip, the more out of sync the sound and the video gets.
    My camera is always set to the 24pa mode, which, by default, records only in the non-drop-frame mode, regardless of any other camera settings I may have selected. The audio settings in my camera (and in the resulting underlying QT files that are created when I capture in FCP) are 16-bit integer and 48.000 khz, as they are in both my FCP sequence presets and capture presets, so I don't think it's an issue of conflicting sample rates. My device control presets are for Firewire NTSC NDF (non dropped frame).
    Given the above information, does anyone have any idea what else I might be doing wrong? I've already shot hundreds of hours of footage last year that worked fine. I don't know what I changed to cause this out-of-sync problem now, but I'm going bald tearing out my hair trying to figure it out.
    Thanks in advance for your help!
    - Mick Raton
    Dual 2 GHz PowerPC G5   Mac OS X (10.4.7)   5 GB DDR SDRAM; Final Cut Studio 5.0.4; Panasonic AG-DVX100A

    The dvd recorder was in the loop when the sync issue showed up.  the dvd was in sync but the live stream, next in line, was out of sync.  I have returned to using the older machine with xp.  (the lap top is running vista)  The older machine is a desktop which requires more space on the production table and time to set up.

  • Like many others, I got the new iPad 3 and couldn't sync all of my photos.  The best i got was 1,000 out of 15,000 to work.  Today Apple released iTunes 10.6.1.7 and said the syncing issue was resolved.  I erased my ipod cache and hit sync.  Still locked.

    Like many others, I got my new IPad 3 and could not sync all of my photos.  The highest I got was 1,000 out of 15,000.  Today Apple released iTunes 10.6.1.7 that , among other things, said it fixed the sync issue with photos.  I excitedly, erased my ipod cache and hit sync.  It looked like it was working, but just like before iTunes locked.  This time at 2,244 of 15,000.  Anybody have an idea of how to fix this?

    What's the capacity of your iPad?
    iTunes needs up to 3x of the actual size of the files you want to sync during the sync process. And syncing 15.000 photos could cross the size of the available free space on your device.
    Don't forget that the pictures are now optimized for the retina display, so the size increases for each of them.
    Message was edited by: Ingo2711

  • IOS5/Itunes 5 sync issues - music greyed out, not syncing across

    Hello,
    I am having issues syncing music from iTunes to my iphone and ipad. I use autofill, but have had the same issue when using the sync all music option. All the files are listed in the music tab under the device, but half are greyed out and unplayable on the device (they are greyed out on the device too). There is a sync icon next to the files, but clicking on it does nothing.... I did a clean restore to ios5 and it copied my apps over, but none of my music, pictures etc. This is really annoying can anyone help?
    IOS5 GM
    Itunes 5

    I have been fighting this problem with both my iPhone, my partner's, and my nephew's. It seems to have something to do with music purchased in iTunes vs. music that is ripped, since all my ripped music transfers fine and stays put.
    On the other hand, downloaded content shows up doubled (one black, one grey) when I look at my music through the iTunes, just like that screen cap. As long as there's a "black copy" showing, it plays fine on my iPhone 4s, but I find I have to remove the greyed out copies manually and then manually transfer from my iTunes library or from the purchased option on the phone itself. In other words, if the music on the phone in only greyed out copies, and it's not on the phone, it doesn't transfer manually unless I first delete the greyed out versions. -- And then the greyed out versions magically reappear after it contacts the cloud and backs up.
    I also sometimes end up with doubled copies, and my albums don't all sort the way they should -- so for example some Diane Schuur shows up under the artist name, and some shows up under albums. To put it all together I had to make a playlist, which is stupid.
    Finally, there are some 46 items it tries to sync everytime I do any wi fi syncing of anything with my phone. I have no idea what that is.
    I'm tempted to wipe and let all iTunes content be restored from the iCloud, a process that would require an overnight restore. I'm guessing that might solve the problem, but why should it all be this hard? Does Apple look at these comments, because I notice there are several different threads on this site concerning the music app and the iTunes/syncing issue?
    Bill

  • XMPSES file extension and Out of Sync issues

    I captured a VHS tape to an AVI. If I watch this file using Windows Media player, the audio and video are in sync. I then imported the AVI into PE11 and created a video project. I selected the MPEG option for Computer under Publish+Share. I did not change any settings. The preset is NTSC DVD Standard. When the project was complete, I now have two files
    FILENAME.MPG
    FILENAME.MPG.XMPSES
    Also, when I play the .MPG file using Windows Media player, the audio and video are out of sync. The audio is delayed by a couple seconds.
    I am using Windows 8.1
    Does anyone know why PE11 creates the two files? Is this related to the sync issues?
    thanks,

    uberjaeger
    That .xmpses is an informational file attributed to Adobe and described as a Premiere Elements DVD Marker File (has information about DVD marker project, chapters, titles and scenes). I can confirm its existance. I do not suspect that as the source of your out of sync audio in your Publish+Share/Computer/MPEG with NTSC DVD Standard export.
    How did you capture the VHS tape to AVI and what type of AVI did put on the Premiere Elements 11 Timeline....DV AVI? If DV AVI, was it type 1 or type 2?
    What were the properties of this import into Premiere Elements 11 - 720 x 480 4:3 @ 29.97 interlaced frames per second or something else? What did you use for Add Media?
    What was the project preset of this Premiere Elements 11 project? Did you set the project preset to NTSC DV Standard manually before the Add Media or did you let the program automatically set the project preset based on the first video drag to the project's Timeline? If the program took charge, what did it set? Please see Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio (even if grayed out).
    If you take your Timeline directly to Publish+Share/Disc/DVD disc, does the DVD-VIDEO standard on DVD disc play back with out of sync audio?
    By the way, do you have the VLC Player and does your mpg play back with audio out of sync there?
    Let us start here and then decide what next.
    Thank you.
    ATR

  • Anyone having Bluetooth syncing issues w VW Tiquan11... and iPhone4? Essentially the pairing craps out every other time when you connect to the cars bluetooth. Requires rebooting iPhone, power off/on and then connects..

    Anyone having Bluetooth syncing issues w VW Tiquan11... and iPhone4? Essentially the pairing craps out every other time when you connect to the cars bluetooth. Requires rebooting iPhone, power off/on and then connects..

    Many people are finding their Iphone 4S drops connection with their VW (Passat etc) integrated bluetooth hands free system after working fine for 5, 10, 20 minutes. The only way to reconnect is to switch the car off or turn the Iphone bluetooth off & back on.
    This is a dangerous fault and it appears that both Apple & VW have no solution (or are ignoring as they have already sold you a phone & a car).
    iPhone 4S, iOS 5.1.1, VW bluetooth

  • DMP-4310G Multicast video out of sync issues

    Hi!
    Currently I have following problem with DMS:
    I have couple of DMPs connected to the same L2 switch with the identical configuration (same startup url, same buffers config etc.) and a multicast streaming server which streams (by UDP multicast) some live video to the DMPs.
    Video codec is h264 (1920p,high [email protected], bw 6000kbps,29,97fps).
    The problem is that after some time (6-15 hours) the video on the screens become out of sync (i.e. screens show the same video but with some delay (1 to 5 sec) between the same frames on 2 different screens for example).
    DMM and DMPs - 5.2.2.
    Can you advise me on that problem?

    Hi again
    I actually think my problems is very much similar to this one:
    http://forums.adobe.com/message/2598909#2598909
    Could it be related to H.264 and mainconecpt not doing things right?
    When I try export the excact same project using Windows Media HDTV 720 - jsut setting the FPS to 50 instead of 25 it comes out nice. Looks a bit more blured to me, but might just adjust some parameters to get it right?
    So i guess this issues with some periodic and ad hoc sync-issues is related to the H.264 mainconcept codec? Is there any other and better codecs for H.264 and how do one get them installed to use them inside PPro CS4?

  • Dynex WBRDVD1 audio out-of-sync issues

    I'm running the Dynex WBRDVD1 via HDMI to my TV.   I'm running a separate SPDIF coax to my Yamaha receiver.   I'm getting a large audio-sync delay on Netflix and Youtube especially.   I have all post processing disabled (Direct on the receiver)    I dont have the sync issue when using HDMI audio on the TV.
    I've adjusted the modes PCM vs Uncompressed and sample rates with no luck.   I imagine there is some sort of delay since HDMI is direct video to the TV-- then digital conversion via the SPDIF to the receiver... then converts it back...etc   
    Anybody else had this problem?   I read that some TV's have the ability to adjust the video delay when this happens..  I just have a Mitsubishi WD65C9 which is a DLP from a few years ago.  So I dont have such an option.

    Does your tv have an optical audio output?  Hook both audio and video to your tv, then run the optical cable out of your tv to your receiver.  the problem is that the tv takes longer to decode the hdmi video that you receiver does the audio, so then they don't sync up.

Maybe you are looking for