Exits for MM01
Hi,
I need to check if the profit center field in MM01 is correct before saving.Do we have any user exits for that?
Regards,
Will.
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Transaction Code - MM01 Create Material &
Exit Name Description
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
No of Exits: 3
Rewards if useful.........
Minal
Similar Messages
-
Hi All,
I am looking for a User Exit for MM01
I need to catpure the Document data in MM01>Additional data>Document data tab
I checked with the following enchancements but no use
MGA00001
MGA00002
MGA00003
BADI_Material_Check.
Can any one help me in finding the suitable enhancemet?
Thanks
BhaskerHi Bhasker
Go to Se18 Tcode
and give the definition name is "DOCUMENT_MAIN01"
check the definition in display mode because it is Sap Standard Definition.
there you will find a "TYPE" Tab
under this you have two check boxes
<b>1) Multiple Use</b>
2) Filter-Depend
if you want multiple implementations check this Check box
after this you need to create a request and the system asks Access Key for Changes
for that you will catch that Key from your Basis Team.
Regards
Sreeni -
Exit for MM01...Before Views Selection.
Hi Gurus,
My requirement is i need to find an Exit for MM01. Here when i try to create a new material by copying one existing material i get the views. Now if i dont select basic data view and directly go to any other view then the exit trigger it specifying that basic data needs to be filled.
Thanks in advance.Hi Abhishek,
Just check the following user exits for MM01:
Exit Name Description
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Hope this will help you... -
Hi Folks,
I am doing some enhancements for MM01 Tcode.we need to add new screens to MM01. could any one tell me the available screen exits or BADI' s for tcode MM01. thnx in advance.
santosh.Hi,
Check these:
MGA00001 - Material Master (Industry): Checks
and Enhancements
MGA00002 - Material Master (Industry): Number
Assignment
MGA00003 - Material Master (Industry and
Retail): Number Display
Check with 'BADI_MATERIAL_REF'
Refer
http://www.****************/Tutorials/ExitsBADIs/MM/MM01.htm
https://forums.sdn.sap.com/click.jspa?searchID=7217830&messageID=3313524
Regards -
Screen Exit for MM01 Material Creation
Hi,
The requirement is to add 2 new field in the Material Creation transaction (MM01) in the General Plant / Storage Location View.
I was trying to find the Screen exit in the MGA Package but there was no screen exit for material. So, i tried by SPRO- IMG, iam able to attach my designed screen and its viewable in MM01 but the data is not being updated in the relevant table for the custom fields (The custom fields are appended in the MARC table).
So, can you please help me about the coding part for the updation of the custom field data.
ThanxHi,
Check these:
MGA00001 - Material Master (Industry): Checks
and Enhancements
MGA00002 - Material Master (Industry): Number
Assignment
MGA00003 - Material Master (Industry and
Retail): Number Display
Check with 'BADI_MATERIAL_REF'
Refer
http://www.****************/Tutorials/ExitsBADIs/MM/MM01.htm
https://forums.sdn.sap.com/click.jspa?searchID=7217830&messageID=3313524
Regards
Kiran -
User exits for mm01 to assign default value
experts,
when i have used exit MGA00002 and the corresponding function module EXIT_SAPLMG02_001 to assign the default values of mbrsh and mtart to the material number created during the course of the transaction mm01 i have written the following code in the INCLUDE ZXMG0U03
matnr+3 = matnr.
matnr+0(1) = mbrsh.
matnr+1(2) = mtart.
concatenate matnr0(1) matnr1(2) matnr+3 into matnr.
but default value is not getting assigned.
with regards.you just want to concatenate the mat type and indus sect to ur material num.
if it is then do this
go for MGA00001
in that u use
data: field1(18) type c,
concatenate the three fields using wmara like
wmara-matnr wmara-mbrsh wmara-mtart
into ur field field1
now write
cmara-matnr = field1.
if useful rewars
regards
Prakash Varun -
Hi,
I need an user exit that will enable me to default some of the fields on the MM01 transaction while creating a material.
The user requirement is... Whenever we create a material using another material as template (copy from material) the Material Price Group (MVKE-KONDM) should NOT be copied from the reference material AND it should be defaulted to a value based on some business logic.
Need an user-exit or BADI where it is possible to put these logic.
Regards,
MilanHi Rishi,
Thanks for replying. I have already tried this exit but the problem is we can change only fields in CMARA structure (TYPE MARU) through this user exit.
I tried modifying the KONDM field in WMVKE structure but this does not get updated in the table.
Did I miss something?
Regards,
Milan -
User Exits for MM01 & MM02 transaction
Hi SDN,
Is there any user exit available for Change, create Material so that i can update some materail related data.
Regards,
RahulHi
MGA00001- Material Master (Industry): Checks and Enhancements
Func. EXIT_SAPLMGMU_001
MGA00002- Material Master (Industry): Number Assignment
Func. EXIT_SAPLMG02_001
Func. EXIT_SAPLMG02_002
MGA00003- Material Master (Industry and Retail): Number Display
Func. EXIT_SAPLOMCV_001
Func. EXIT_SAPLOMCV_002
Func. EXIT_SAPLOMCV_901
Func. EXIT_SAPLOMCV_902
Regds
Seema -
Any Exit for MM01 and MM02 view change?
Dear All,
My requirement is I want to check profit center for particuler plant.
I have maintain a table of Plant , Busiiness area and Profit center. And I want to check profit center in that plant when user enterd after filling profit center.
I dont want on save material. Plz suggest me exit or Badi or enhancement at the time of Enter in Plant data view?
I searched and I got many exit at the time of saving but not for Plant data view Tab.
Thanks in Advance.
Thanks and Regards
Stevesolved
-
Screen exit for MM01 to add additional fields to basic data tab .
Hi All ,
We are working on the SAP version ECC 5.0 . Our requirement is to add additional fields to the general data section of the basic data1 tab for the tcode MM01 . I have gone through many previous queries in SDN but not able to figure out what exactly the process should be . All I could figure out is to start the process from appending the structure to MARA for the additional fields . Then follow the steps in the SPRO .
Define Structure of Data Screens for Each Screen Sequence
Assign Secondary Screens
Maintain Order of Main and Additional Screens
Assign Screen Sequences to User/Material Type/Transaction/In
Define How Maintenance Statuses Are Determined in Data Trans
Create Program for Customized Subscreens
I am not able to comprehend what we are trying to do in these steps .
Can anyone explain me in detail what we are trying to do in the whole process ?
Thanks ,
Varun .Hi varun,
Create the append structure on the MARA table.
The SAP note 44410 describes how to add the new fields to the screen and how the updating will work.
1. Make a copy of function group MGD1to ZMGDI as stated inthe Ossnote using program COPYMGDI.
2. Goto Se38 enter program name SAPLZMGDI Click Display and goto> program-> other object---> enter screen number '0001' and add your fields to the subscreen which should apper on the the general data section of the basic data1 tab for the tcode MM01
2. Make the changes stated in SAP Note.
3. After make the changes the functional analyst will need to make some configuration changes.
4. SPRO -> Logistic General -> Material Master -> Configuring Materal Master -> Define Structure of Data Screens Sequence.
5. Select SSq = 21 then click on Subscreens select Basic DATA1
6. Enter in the new screens that were built
7. Change the row that was create putting in the program (function group program) that was created in step 2.
Thanks and regards,
Pavankumar -
Hi, all
how to input default value e.g.. 01 in field division in tr. MM01
that is MARA-SPART field.
this is EXIT_SAPLMGMU_001, and how to do this please guide me!Look at [BADI BADI_MATERIAL_REF|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=badi_material_ref&cat=sdn_all], method CREATE_MATERIAL.
Look the online documentation.
Regards -
Implement screen exit for MM01
Hello all,
I follow the instructions from the link below for adding a new tab for MM02-MM03 tcodes.
<link to blocked site removed by moderator>
I added the tab and i created the screens but now i want to fill my tab with values from mvke table and i need to use values ( vkorg werks vtweg )which i entered on the organization level selection screen.
On MM02, On the first screen i enter matnr then i select my new tab view, then i enter ( vkorg werks vtweg ) values for organization levels.
Now i need these ( vkorg werks vtweg ) organization level values in my new tab but i cant get them. I tried get parameters but it is only working for matnr. Not these parameters. How can i get them any ideas? All global tables are empty in my tab.
Edited by: aydnbk on Oct 6, 2011 10:48 AM
Edited by: Thomas Zloch on Oct 6, 2011 8:36 PMI managed to do it by using badi BADI_MATERIAL_OD
-
Exits for XD02 - Checking of Tax Code
Hi,
Is there any user exit, enhancement or screen exit for XD02, for tab Control Data? Specifically for checking of Tax Codes.
Thanks,
YanneHello friend,
please check the liknk then u can ur self find the exit.
Re: User Exit for MM01
if ur find exit with description u can write the code there.
or small advice to keep break-point and run the tcode and check wheater its triggring......
Thank u,
santhosh -
Hi,
Can i know what are badis exits for MM01/MM02/MM03.Can i know the procedure how to search badis.This are the available badis and exits for this t.code:
Enhancement/ Business Add-in Description
Enhancement
MGA00001 Material Master (Industry): Checks and Enhancements
MGA00002 Material Master (Industry): Number Assignment
MGA00003 Material Master (Industry and Retail): Number Display
Business Add-in
MG_MASS_NEWSEG User-Specific Fields & Segments in Mass Maintenance
MATGRP_SKU_UPD
CDT_CHECK_MATERIAL Checks for Existence of a Material in a CDT
BADI_MM_MATNR
BADI_MAT_F_SPEC_SEL BAdI for Material Special Field Selection
BADI_MATNR_CHECK_PVS
BADI_MATERIAL_REF Addition of customer-defined default data for material
BADI_MATERIAL_OD
BADI_MATERIAL_CHECK Enhanced checks for material master table
BADI_GTIN_VARIANT
BADI_EAN_SYSTEMATIC
o.of Exits: 3
o.of BADis: 11
Find the Exact exits and badis for ur requirement.
How to fine the exact badi:
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any
transaction
Regards -
How to implement the search help exit to MM01 for Material by product hiera
Hi,
How to implement the search help exit to MM01 T-code for Material by product hierarchy,
but system default it gives the data from MVKE table, my client wants from MARA table,
i created the one Function Module, write this code in that FM.
IF CALLCONTROL-STEP EQ 'DISP'.
REFRESH RECORD_TAB.
SELECT * FROM MARA INTO TABLE RECORD_TAB
WHERE PRDHA =
ENDIF.
I Face the problem what variable i have to pass in WHERE CONDITION, FROM THE MM01 T-code.
is't require to IMPORT variable from MM01 program, what is that import variable, please give me the solution.
thanks to all.Hi there..
check my web blog on search help exit...
[Search help exit code|https://wiki.sdn.sap.com/wiki/x/du0]
Maybe you are looking for
-
I'm probably going to purchase a MacBook and I want to connect it to my HD plasma but i've only got hdmi ports or an RGB port (Which my mini runs through) anyway to connect a MacBook to HDMI i need: Apple Mini-DVI to DVI Adapter: http://store.apple.c
-
Upgrading Applecare a day or two after?
Here's the situation, i was supposed to upgrade my AppleCare to the 3 years on my January 2010 MacBook, however, mother has been ill so i've been busy and forgot about it. My MacBook was shipped out by Apple on the 16th last year, due to weather cond
-
Error While loading data from 8 DSOname to Cube.
Hi All, while loading data from 8<DSONAME> to CUBE , the data is Sucessfully loaded data into Cube, but the Request Status is shown in Yellow,why it is showing, please tell me how to make it Sucessfull. Thanks and Regards, santosh.
-
Suddenly unable to view project for no apparent reason.
Hello All, I've been working on a short documentary. Everything has been going along swimmingly. I left the project to partipate in a conference call. When I came back, and press play to see where I had left off, the picture (edits, dissolves, graphi
-
Validation for Businessplace section code
Hi, Can any body tell me abt how to put valiadation for making business place section code mandatory in Transaction code GGB0