Exp 9i (sid X) - imp 10g (sid Y)

Hi all,
I'm moving from 9.0.1 on hp-ux to 10g on redhat. I exported the database and i'm actually importing it on my new box (on a new database with a different name).
I got 2 questions:
1- I'm not really sure of what's going to happen with the SYS & SYSTEM schemas. Do I have to run something when the import will be completed (catproc et al)?
2- I think the full export has nothing to do with the old DB name. Am i right?
Thanks in advance and have a great day,
JF

Hi all,
I'm moving from 9.0.1 on hp-ux to 10g on redhat. I
exported the database and i'm actually importing it
on my new box (on a new database with a different
name).
I got 2 questions:
1- I'm not really sure of what's going to happen with
the SYS & SYSTEM schemas. Do I have to run something
when the import will be completed (catproc et al)?
Some poster actually brought it up before, data dictionnary information that hosted by SYS will not be exported even it's full export. Because Oracle assume you will have the necessary information in new database.
2- I think the full export has nothing to do with the
old DB name. Am i right?
Thanks in advance and have a great day,
JFThere're different "DB name" per se, by "DB name" do you mean instance ID or db_name parameter.
Any generally speaking, full export will not take the db_name with it.

Similar Messages

  • Bash shell for  sid adm and ora sid user

    I'm planning to make bash shell as the the default shell for my <sid>adm and ora<sid> user. Will there any issues? It seems harmless.
    My current setups are ECC6 on top of  AIX 5.3 and Oracle 10g
    regards,
    Marjan

    The only problem is permission of user access to that bash shell. as well as what u u want to run i mean to say if it is any haevy erport or update insert or refresh functionality then do not run at the time of haevy load.
    Thanks

  • My iPad keyboard divided in half with one side on the left side of the tablet, the other on the right side and an equal blank space separating them.  The entire keyboard also became smaller.  How can I get it back to normal?a

    My iPad keyboard (spontaneously?) divided in half with one side on the left side of the tablet, the other on the right side and an equal blank space separating them.  The entire keyboard also became smaller.  How can I get it back to normal?

    You can also turn OFF Split Keyboard
    Settings>General>Keyboard>Split Keyboard>OFF

  • Side-effects or negative sides of specific kind of connection

    First of all, I have to say that I don't have much experience in networking.
    I'm interested to know are there any specific side-effects or negative sides of connecting method I'm currently using.
    I have an ADSL modem/router Huawei HG510, which has 4 ethernet ports, locked by internet provider to provide internet connection on ports 1 and 4, IPTV on port 3, and port 2 reserved for VoIP. Close to this router I have AirPort Extreme (n-version) which I've connected to ADSL router in this way:
    - _IPTV lan (ethernet 2) port on ADSL router is connected to WAN port on AirPort_
    - _Internet connection is provided through ethernet 1 (LAN 1) port on ADSL router which is connected to LAN 1 port on AirPort_
    AirPort Extreme is configured as a bridge with manually assigned IP address with DNS set to IP address of ADSL router.
    DHCP is running on a ADSL router.
    AirPort Extreme provides 802.11g-only WDS network. In another room there is a WDS remote - AirPort Express (b/g model) which is connected to stereo, and also to IPTV STB by using ethernet cable.
    AirPort Express is also configured as a bridge with manually assigned IP address and DNS set to IP address of ADSL router. Two computers (one PC and one MacBook Pro) connect to this wireless network (sometimes I connect them to AirPort Extreme by cable) and they both have manually assigned IP addresses.
    So basically AirPort Extreme provides both Internet and IPTV streams.
    I don't have any special problems with this kind of connection, but I've noticed that sometimes when I reboot the system on MacBook Pro, internet connection is not recognized immediately, and network diagnostic commands such as - arp work with a long delay. This fixes by itself after some time, but I would like to know what cause it.
    btw wireless network is set on Multicast rate of 24Mbps
    Any comments and suggestions are appreciated.

    Is there a reason why you can't connect ethernet 1 (LAN 1) port on the router to the WAN port of the airport extreme base station? I'd have thought that might be better way for it to be networked to internet connection if going to act as bridge. networking internet connection and IPTV at same time may be not ideal situation for extreme base station network.
    Anyway, if I'm missing something then it's also possible that your network may just be a bit too technically complex for the extreme base station, it really is aimed to be plug and play and not that user configurable: it either works or it doesn't. If you have to have it as you describe above, and can't improve situation by altering settings present in the airport admin utility, then may want to look at other wireless bridges on the market.

  • The bookmark tab went from the right side to the left side. I did not change that. what cause the change from the right side to the left side?

    The bookmark tab went from the right side to the left side. I did not change that. what cause the change from the right side to the left side? Also the the Mozilla Firefox tab on the upper left hand corner changed.
    Its was a red colored tab and now its blue in color. I did not change any thing!

    Hey jimmiet,
    There were some recent ui changes around the downloads manager. What version where you on before? Anyway, you can customize things in Firefox really easily. Take a look at [[Customize Firefox controls, buttons and toolbars|this article on customizing Firefox]] for details. Should be a piece of cake to move the bookmarks button.
    As for the color of the button, you might be in [[Private Browsing - Browse the web without saving information about the sites you visit|Private Browsing]] mode. That changes the color of the button from orange to a purplish color.
    Matt

  • Hi I'm new to Mac & I have bootcamp on it but am stuck, how do I get from Mac side to the Window side?

    Hi I'm new to Mac & I have bootcamp on it but am stuck, how do I get from Mac side to the Window side?

    Hold the "option" key on boot.  Choose the system to boot.
    Then "System Preferences > Startup Disk" to select Max OSX as your default system.
    There is another "system preferences" in the Windows menu that is added by bootcamp to make it the default, but I do not know the details of that.

  • How to view the pdf files stored in client side using  forms 10g

    Hi All,
    I am using webutil to upload and download the blobs from database. I susccessfully uploaded/downloaded the blobs from database to client(d:\temp.one.pdf)
    Now I want to view the download pdf through form.
    Can anyone help me regarding this?

    I have tested the sql and found that there are no records in the table in which iam uploading the file
    In the form, I am joing tow tables mapping with rpt_num
    Even after adding information for the image table like image_no,image_name and
    when i click on upload to db icon. it gives me the same error WUT-113
    I think I need to save this basic information first and then upload the file
    can you please advise where can i add this code to save the data first
    below is the code iam using to upload the file from database
    PROCEDURE UPLOAD_DB IS
    l_success boolean;
    BEGIN
    l_success := webutil_file_transfer.Client_To_DB_with_progress
    (clientFile => :images.file_name
    ,tableName => images'
    ,columnName => 'RPT_IMAGE'
    ,whereClause => 'RPT_NUM = ''' || :PVT.PVT_SA_RPT_NUM || ''''
    ,progressTitle => 'Upload to Database in progress'
    ,progressSubTitle=> 'Please wait'
    ,asynchronous => false
    ,callbackTrigger => null
    if l_success
    then
    message('File uploaded successfully into the Database');
    else
    message('File upload to Database failed');
    end if;
    exception
         when others
         then
         message('File upload failed: '||sqlerrm);
    END;

  • EXP from UNIX to IMP in windows.

    I have an export from UNIX of oracle 10.2.0.1.
    I have taken backup with EXP utility of oracle.
    I need to import that DUMP into windows with IMP command.
    Is that possible?
    Will it be successful?
    Thank,

    To open, view, unzip, decompress or uncompress a Gzip compressed archive file in Windows environment, a third party compression and decompression utiltiy or file archiver or data compression utility that supports Gzip archive file format is needed.
    You should unzip, then transwer it to Windows to use it
    Kamran Agayev A. (10g OCP)
    http://kamranagayev.wordpress.com

  • Can not change password of sid adm and ora sid

    Hello Experts,
    I have done a system copy of SAP ECC6.0.The target and the source system are on the same host.Hardware platform is HP-UX 11.31 and database is Oracle 10g.Both the systems are up and running now.
    While target system installation, I gave the "master password"(password for all users) same as in the source system.
    But when the target sysetm was installed, I found that <target  sid>adm and ora<target sid> ,ddic passwords are not working.For J2EE_ADMIN, the password is working.
    Please guide how to change ( or reset) the password of <target  sid>adm and ora<target sid> without knowing the old password.
    DDIC password I could able to change by logging into the system with SAP*
    Please Help..
    Anupam.

    for
    Please guide how to change ( or reset) the password of <target sid>adm and ora<target sid> without knowing the old password.
    You need to login with root and then just type passwd sidadm and give the new password.Same you can do it for orasid.you can change it with root as it has administrator rights and will not ask for the old password.
    Thanks
    Rishi Abrol

  • Is the new Ipod Touch 5g compatible with all of the ios 6 features and is the new Ipod have the exact same design as the Iphone 5 for example square sides, instead of curving sides?

    Does the new Ipod have the same features as the Iphone 5 in terms of panorama, or like the new Isight camera? Like the same features/ design?

    it is compatible with most iOS 6 things, the main difference is just the fact that it doesn't have 3G or 4G, which limits how much it can use Siri or Maps.
    it does have panorama, and a 5 MP iSight camera. the design is different. it is a lot thinner, it has curved edges, and at no part of the side is it flat, same for the top and bottom. that is NOT the case for iPhone. also the iPod doesn't have a mic. on the front.
    hope this answered your question.
    just remember this for iOS 6: pretty much everything that doesn't always require internet the iPod can do. if it is something liketurn by turn direction, unless you have wi-fi in car, it wont work.
    if you need siri for anything outside of wifi, unless it's something on the hard drive itslef, i.e. setting up reminders, it wont work for thing such as facebook posts, looking for restaurants, etc.

  • How to print on the first side and the back side, like in a book?

    HP PHOTOSMART 6510 B 211 a
    Windows XP
    Product N° CQ 761B
    [serial number removed for privacy]

    Hi AUQUE,
    Here is a link to a document that will show you how to duplex (print on both sides of the paper ).
    Along with the document is a video. Hope this helps.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Line item dimension wont insert sid values in infoobject sid table

    Hi all,
       I have a strange problem, whenever I load data into a cube which has a line item dimension on 0customer without first loading the master data I am getting inconsistency in RSRV saying that no corresponding DIMid exists in sid table.
    So there are Dimids in the fact table but the dimension table, which is same as the sid table in the the case of line item dimension, doesnt have them.
    Can someone explain me why is this happening?  I thought if a characteristic value doesnt exist in the master data but comes in through the transaction data it inserts the same in the sid table. 
    Is there a different rule for line item dimensions? Can someone point me to some OSS or documentation?
    thanks

    Thanks all..
    To clear up a few questions:
    1. What I mean by <i>"So there are Dimids in the fact table but the dimension table, which is same as the sid table in the the case of line item dimension, doesnt have them"</i> is:
    the line item dimension table /bic/D<cubename>9 which is really a view on the sid table for characteristic /bic/s<ch. name> does have all the sid values (or all the dim values) as the fact table.
    So fact table has more entries for that dimension than the sid table.
    2. Yes we are facing reporting errors where we cannot drill down by that infoobject and LISTCUBE doesnt show us any cube data when that characteristic is chosen for display.
    3. I have checked notes where it seems to be a RSRV bug but in our case it doesnt seem to be as observed in the actual table mentioned in #1
    Now it is apparent that I am right both from help.sap.com link and what I am observing that for line item dimensions master data HAS TO BE LOADED FIRST for the characteristics used as a line item.

  • My iPhone 5s charger has turned black on one side. On this side i can't charge it, but when i flip it and put it in it charges fine. I want to know if it is safe to charge my phone, or will it end up killing the battery?

    this is the side of the charger that wont charge. the black wont rub off

    I wouldn't use it. Take/send it to Apple and see what they make of it. It will be covered by warranty if it is faulty (which looks likely).

  • Move the "X" from the left side to the right side in the Document Name Tab

    I just installed CS5 MC for MAC and realized that the "X" to close the file is by default located to the left side of the Document  Name in the Tab or Bar rather than to the right when multiple files are open in an application.  I haven't checked all the Adobe Apps yet, but found this to be the case so far in AI, PS, ID.
    Where do I go in the master or individual app settings to reconfigure the file name/document name tab or bar so the little "X" that closes the file is to the right of the name rather than the left?
    I did notice that in many of Deke's Lynda training videos, the "X" was on the left in a few sessions, but most were on the right.  Really hope this isn't a MAC/PC centric thing or that it is mandatory to download Deke's custom settings for the fix.
    Thanks to anyone with the magic answer!!!
    Cheers!

    Bob --- Thank you for that very quick response.
    Bugger for the unfortunate answer, but thank you for advising/confirming the sad reality.
    Sure wish some code would fall from the sky and do a fix or workaround on this so users have the option.  I may be one of the few hung up on this, but it sure would be nice.
    Seems this is yet another "...centric" reason to use a PC in lieu of a MAC when working with Adobe products these days.
    Flip/Flop go the platforms!
    Cheers!

  • Need help on exact SIDs generation in different SID tables (S,Q & Y tables)

    I have a scenario like..
    Matgroup is a time-dependent attribute to Material. MatGroup is included in material dimension of cube C01. Cube C01 is loading with transactional data, which has both fields, Material and MatGroup, with the option of generate master date.
    As a result..
    Material SID table (S table) - Get Updated
    MatGroup SID table (S table) - Get Updated
    Now the question is whether material master tables (Q & Y tables) contains the new Material - MatGroup relationships with their validity time interval or not. i.e. are attributes of master data tables (Q & Y tables) updated?
    Actually my requirement is I need to add the new time-dependent attribute to a characteristic, and I want it to be populated while transactional data loading into cube. Would to be possible? Please give the solution if it is possible.

    I am a bit confused. this also works without numbers in the C3 column.
    drop table tablea;
    drop table tableb;
    create table tablea as
    (select 1 C1,'B' C2, 'descA' C3 from dual union
    select 1, 'B', 'descB' from dual union
    select 2, 'x', 'descC' from dual union
    select 3, 'y', 'descC' from dual
    create table tableb as
    (select 1 C1,'B' C2, 'descC' C3 from dual union
    select 2, 'x', 'descB' from dual union
    select 3, 'y', 'descC' from dual
    merge into tableb t1
    using (
               select tablea.C1, tablea.C2, max(tablea.C3) C3
               from tablea, tableb
               where tablea.c1 = tableb.c1
               and     tablea.c2 = tableb.c2
               and     tablea.c3 != tableb.c3
               group by tablea.C1, tablea.C2) t2
      on (t1.C1 = t2.C1 and t1.C2 = t2.C2 )
    when matched  then
    update
    set T1.C3 = t2.C3;
    select * from tableb;
    C1     C2     C3
    1     B     descB
    2     x     descC
    3     y     descC

Maybe you are looking for