Exp job completed successfully but nothing happend

Hi,
I am using oracle 8.1.7 with enterprise manager on windoews 2000 server.
Exp job is not working. Job completed successfully without any error but The log only shows the help message of exp command. Simmilarly if i use exp command on prompt then it also returns the help message.
However imp is working fine.
Anybody can help please.

Hi ,
Please first check the status of the Job , ifs successfully completed then debug it (tcode JDBG) and
check out, whether the values passed (might be using Import-export ,set-get parameter Ids) to the Job are getting passed properly or not. These values might not be getting passed properly.
If it has some error in Job Log then let me know the error.
Regards,
Uma

Similar Messages

Problem in Background Job. Job Completed Successfully but data not Posted

Hi All,
There is a problem in Background Job in Production server (600).
The job completed successfully but data not posted.
The same Job was working perfectly till the starting of the May month.
but now it is not working and rebate has not been posted.
Where to check and what to check
Pls suggest.
Regards,
P Kamal

Hi ,
Please first check the status of the Job , ifs successfully completed then debug it (tcode JDBG) and
check out, whether the values passed (might be using Import-export ,set-get parameter Ids) to the Job are getting passed properly or not. These values might not be getting passed properly.
If it has some error in Job Log then let me know the error.
Regards,
Uma

Job finished successfully but Spool not generated(no spool icon)

I am generating a report which . When the program in scheduled, the job completed successfully but spool icon is not available. Could any one suggest us the reason why spool has not generated. Thanks in advance!

Hi,
When executing report, Spool gets generated only when an Output is generated. Please check if output exits for the selection criteria.
Also check any special mechanisms are used that diverse the ouput when executed in background.

Job created successfully but actually failed

Dears,
I created this job by HR user to refresh the Materialized View automatically every 15 minutes as below:
BEGIN
DBMS_SCHEDULER.CREATE_JOB(
JOB_NAME => 'Job1',
JOB_TYPE => 'PLSQL_BLOCK',
JOB_ACTION => 'EXEC DBMS_MVIEW.REFRESH(''MV_employess'',''C'')',
START_DATE => SYSTIMESTAMP,
repeat_interval => 'freq=MINUTELY;interval=15',
END_DATE => NULL,
ENABLED => TRUE,
AUTO_DROP => FALSE,
COMMENTS => 'Refreshes Materialized View');
END;
/PL/SQL procedure successfully completed.
The job created successfully but while querying the "DBA_SCHEDULER_JOBS" found that failure_count is 1. It means that job created successfully but actually failed.
can you please help me ?
Many thanks & regards,

USER_SCHEDULER_JOB_RUN_DETAILS was very useful as i found some errors like ORA-06550 & PLS-00103 errors.
i solved the issue and job has been run successfully.
Many thanks for support

Please i did pay to renew my ios developer account and you sent me an email to reply within 2 business days, but nothing happend yet. may i know what is the problem?

please i did pay to renew my ios developer account and you sent me an email to reply within 2 business days, but nothing happend yet. may i know what is the problem?

This is primarily a user-to-user support forum and not related to developers. The following link has information about checking your program enrollment: https://developer.apple.com/support/ios/enrollment.html#howcanicheckstatus
If that doesn't help, there is a "Contact Us" button at the bottom of the page in the above link.

Powershell script to set custom attribute on mailuser returns WARNING: The command completed successfully but no settings of user have been modified.

I am trying to write a script to enable a mailuser (I do know the difference between mailuser and mailbox) and set a custom attribute for that mailuser. Every time I run the script I get "WARNING: The command completed successfully but no settings
of <User DN> have been modified." Both commands being invoked work when typed manually into the exchange management shell on the exchange server itself. I am using the same administrator account in the script, and when I login to the
exchange server to manually run the commands, so it shouldn't be a permission issue. Here is my script so far. If anyone can shed some light on what I'm doing wrong, I'd appreciate it.
$excel = new-object -com excel.application
$wb = $excel.workbooks.open("c:\temp\testmail8.xlsx")
$ws = $wb.Worksheets.Item(1)
$row = 1
$s = New-PSSession -ConfigurationName microsoft.exchange -ConnectionUri http://<Exchange Server Name>/powershell -Credential [email protected]
Do {
$Email = $ws.Cells.Item($row, 1).Value()
$Cat = $ws.Cells.Item($row, 2).Value()
invoke-command -Session $s -ScriptBlock {Enable-MailUser -ExternalEmailAddress $($args[0][0] + "@domain.com") -Identity $($args[0][0])} -ArgumentList (,$Email, $Cat)
invoke-command -Session $s -ScriptBlock {Set-MailUser -Identity $($args[0][0]) -CustomAttribute1 $($args[0][1])} -ArgumentList (,$Email, $Cat)
$row++
} While ($ws.Cells.Item($row,1).Value() -ne $null)
$excel.quit
Exit-PSSession

Hi,
I'm not sure where is wrong in your script. If you want to get more help about the script troubleshooting, I recommand you to ask a question in Script Center forum for more professional answers:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
As a workaround, please directly create a mail user in EAC and set related custom attribute to have a try.
Thanks,
Winnie Liang
TechNet Community Support

After i update my mac from snow leopard to mountain lion i can't use zoo with 2 finger i already setting in system preference but nothing happend

i have mac book pro and couple week aga i update and buy to mountain lion but my mac getting slow and i can't use zoom 2 finger i allready sett in system preference but nothing happend still can't use 2 fingger

Hi galleryskins,
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
OS X Mountain Lion: Zoom content on the screen
Zoom with a mouse or trackpad
To zoom in and out, hold down the modifier key you specified while you perform the scroll gesture.
For example, if you have a trackpad and used the default settings, zoom in by holding down the Control (^) key while you drag two fingers up on the trackpad. Zoom out by holding down the Control key while you drag two fingers down on the trackpad.
If you chose Picture-in-picture zooming, a window appears near the mouse cursor with the magnified image. If you chose Fullscreen zooming, the entire screen displays the magnified image.
I hope this information helps ....
Have a great day!
- Judy

TS1702 hi. i have made and in-app purchase in fring. the amount was deducted from cridet card, receved receipt, but nothing happended to my balance at fring.

hi. i have made and in-app purchase in fring. the amount was deducted from cridet card, receved receipt, but nothing happended to my balance at fring. what to do ???

The problem is with an item in the 'Latest Purchases' section. When I click on 'Report a Problem' it takes me to the support page. I have gone to the link you provided many times... so far it always says to check again in a few minutes and never works.
I would really like to hear back from Apple directly and get some assistance with this issue.

I have upgraded to the latest firefox v7.0.1 for windows, when i click on its icon it doesnt open up? I uninstalled it and then reinstalled it but nothing happend it still doesnt work?

I have upgraded to the latest firefox v7.0.1 for windows, when i click on its icon it doesnt open up? I uninstalled it and then reinstalled it but nothing happend it still doesnt work?

Sorry you are having problems. First of all try Fifrefox's safemode.
*[[Troubleshoot Firefox issues using Safe Mode]]
If that works post back for further advice.
Next step, if safe mode did not work.
First: Try a clean install, (you have had a none standard version installed previously) that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
See
* this recent post [/questions/940399#answer-377134]
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Second: try a New Profile
*http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
* this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
**[[Back up and restore information in Firefox profiles]]
* Until you are absolutely confident about the repercussions I suggest
** always use an empty folder when creating a new profile
** never delete or rename profiles, just disable or remove shortcuts
** after creating a new test profile open it and check for any addons or plugins that may be have been included by default

Process chain node is in yellow colour but job completed successfully

Hi All,
I have one master data load process chain. This process chain have one child process chain also. Parent process chain was showing Fail for one child process chain. When I checked child process chain I got to know that one info package is still in the running state. When I checked the monitor of the data load , It is showing successful data load , even i have checked in batch job log , it is also showing ' JOB COMPLETED SUCCESSFULY'.
Now as this node is in ruuning state , all lined up process are on hold.
Please help me with this issue.
Thanks in advance.

hi,
open the child process chain, right click on the variant at which it is struck. note down the details such as log instance,variant.
open table rspcprocesslog in SE12 ,give the details of variant and job logs and find the instance id.
open tcode se38 ,enter program RSPC_PROCESS_FINISH.
execute it, enter the details obtained from table rspcprocesslog table for the same and set the status to "G" and execute.
the process chain will be triggered.
regards,
Arvind.

Get-adgroupmember says it completed successfully but displays nothing in Powershell

I am trying to display all the members of administrators so I try
Get-ADgroupmember -identity administrators
and it returns
Get-ADGroupmember : The operation completed successfully
At line:1 Char:18
+ Get-ADgroupmember <<<<
+CategoryInfo "NotSpecified: (administrators:ADGroup) [Get-ADGroupMember], ADException
What am I doing wrong?
JF

Hi,
I have faced this error when the group contains foreign members. Try to use Get-ADGroup and access members property - it should work. PSB example:
PS C:\> Get-ADGroupMember my_cool_group
Get-ADGroupMember : The operation completed successfully
At line:1 char:18
+ Get-ADGroupMember <<<< my_cool_group
+ CategoryInfo : NotSpecified: (my_cool_group:ADGroup) [Get-ADGroupMember], ADException
+ FullyQualifiedErrorId : The operation completed successfully,Microsoft.ActiveDirectory.Management.Commands.GetADGroupMember
PS C:\> (Get-ADGroup my_cool_group -properties members).members
CN=Citrixtest\, Citrixtest,OU=Ireland,OU=Users,DC=DOMAIN,DC=LOCAL
CN=S-1-5-21-830052177-1794105578-3120254253-14766,CN=ForeignSecurityPrincipals,DC=DOMAIN,DC=LOCAL
CN=S-1-5-21-830052177-1794105578-3120254253-14960,CN=ForeignSecurityPrincipals,DC=DOMAIN,DC=LOCAL
CN=S-1-5-21-830052177-1794105578-3120254253-10641,CN=ForeignSecurityPrincipals,DC=DOMAIN,DC=LOCAL

Process flow completed successfully but flagged as BUSY in OWB ?

Hi, I have several process flow jobs that are scheduled to run each night.
All steps of the process flows completes successfully (checked in Workflow Manager and Warehouse Builder Browser), but the overall status is always set to BUSY in OWB Browser.
I have seen earlier related threads in this forum regarding the termination of jobs left in a BUSY state (through problems with the process flow etc), but why are my jobs being flagged as busy ?
Seems like the completed successful status is not getting through to OWB Browser.
Any ideas ?
Thanks
Paul

Login to SQL PLUS as Workflow owner and run
call wf_purge.Move_To_History(null,null)
Search this forum for posts from Oleg from Kiev. He knows what he is doing and his posts helped me a lot. I have seen few posts from him related to this subject.
Vladimir

Process completed successfully but status changes to red

hi in my process chain all the processes of the master data load local chain completed succesfully but the status changes to red and the chain is not processding further. wh t may be the reason for this.
do any one have idea about this

Hi,
RED means the whole status of the chain or any particualr step in the process chain..?
If the total status is RED even all the steps finished successfully once come out of the session and again refresh and chk status...
Now if any step in the chain fails the total chain status remains RED only...
If u still needs to process further then u can use FM: RSPC_PROCESS_FINISH in SE37
U hav to copy the detals from the table RSPCPROCESSLOG.........
Check this blog:
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
rgds,

"Install completed successfully", but many files are missing. (J2SE)

I downloaded the 80MB J2SE + netbeans package today, and when I try to install it, everything goes fine. Installer says it was successful, but MANY files are missing (including tha main netbeans file which the icon on my desktop links to). Here's my install log:
(Aug 17, 2003 12:50:17 AM), Setup.product.install, com.installshield.product.actions.Files, err, java.util.zip.ZipException: invalid stored block lengths
STACK_TRACE: 19
java.util.zip.ZipException: invalid stored block lengths
     at java.util.zip.InflaterInputStream.read(InflaterInputStream.java:139)
     at com.installshield.util.ZipInputStreamWrapper.read(ZipUtils.java:146)
     at com.installshield.archive.index.ISInflaterInputStream.fill(CompressedURLConnection.java:228)
     at com.installshield.archive.index.ISInflaterInputStream.read(CompressedURLConnection.java:140)
     at java.io.FilterInputStream.read(FilterInputStream.java:93)
     at com.installshield.product.actions.Files.copy(Files.java:700)
     at com.installshield.product.actions.Files.copyFileWithFileService(Files.java:737)
     at com.installshield.product.actions.Files.install(Files.java:378)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(PureJavaProductServiceImpl.java:1868)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(PureJavaProductServiceImpl.java:4649)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(InstallableObjectVisitor.java:365)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(InstallableObjectVisitor.java:325)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(InstallableObjectVisitor.java:135)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:4276)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:3652)
     at com.installshield.wizard.service.AsynchronousOperation.run(AsynchronousOperation.java:40)
     at java.lang.Thread.run(Thread.java:484)
"Installing J2SDK..."
"Finished Installing J2SDK..."
I have had nothing but problems with java so far and I am about ready to consider it a mediocre and unpredictable programming language that I can do without. Please help as i am quickly losing patience, especially on 56k when i have to download non-functional 80mb files. Anyways, this problem is happening on winxp home ed. thanks

. I did it on HSD cable
this time and again the file sizes match. but, when i
go to a command prompt, and type java or javac, they
are unrecognized commands.You need to set up your PATH environment variable to include the path of the java.exe and javac.exe files. For the current command prompt, typing in:
set PATH=%PATH%;C:\j2skd1.4.2\bin
Would do the trick. Change the directory, if you've installation is different. Then java and javac should be recognised.
and when i try to compile
an applet in netbeans that i wrote before and works
fine with an online compiler, it gives the error:
java.lang.NoSuchMethodError: main
Exception in thread "main" Netbeans is treating your applet as an application. You should tell it it is an applet. I'm not sure how to do it, sorry. Best thing would be to use NetBeans to compile, but load the applet in an external browser.
Regards,
Bhaveet

Satellite A50-109: CD burn completes successfully but disk is blank!

After working fine for a year i get this funny behavior from my CD burner:
Burning process completes seccessfully but disk is blank.
I am using a Satellite notebook model A50-109 with winXP pro sp2 installed.
Toshiba driver is recognized by XP, and all seems to work well except disk is always blank.
This phenomena is the same while using XP's original burner or Nero.
Seems to me then, like a hardware failure.
Am i right?
Is there a way to check hardware before applying to service provider?
Thanks for your attention
Rea

I have an A60 and met the same problem the other day. I haven't burnt a CD for quite some time and when I tried it last week, the program which came with the notebook (RecordNow!) says there was an error, but it wouldn't say anything specific. When I tried it again, it stopped right after the writing started, and there was nothing on either CD. I simply cannot believe that it is a hardware failure, I mean, I hardly used it for burning (ca. 8 times in 2 years).

Exp job completed successfully but nothing happend

Similar Messages

Maybe you are looking for