Expand button blanks out other monitors

I have three monitors. When I click the "Expand" button (green) in any application, it zooms to full screen as you would expect, but it also makes the other screens go blank. I have turned everything off in Mission Control, but that has no effect. How can I fix this?

Hi galven lee,
If the installer disk cannot see your partition, the worst thing is that your OS X partition is corrupted. Even if you try to install a new OS, installer will refuse to proceed since it cannot assign to invisible HD, unless you can try to format and install at that 5 GB partition.
Try to reinstall and choose archieve and install if you can see the 75 gb partition.
Are you sure it was the partition for XP and not your DVD installer disk.
There are couple of third party software taht can rebuild your HD, like Tech tool :
http://www.micromat.com/index.php?option=content&task=view&id=31
You can give it a shoot, and it a lot cheaper ($99.99?) compare to data recovery ($499.99?)
Good Luck.

Similar Messages

Clicking Export or Next Page button blanks out report

We are having an intermittent issue where a report loads fine with several pages or data but, when a user clicks the export or next page button, the report blanks out the data and shows the page count as 1/1 where it was 1/250 previously.
This does not occur every time, but seems to be happening to all users and some point and with multiple reports.
Has anyone else experienced this issue? We have tried restarting the page server and republishing the reports.

We are having an intermittent issue where a report loads fine with several pages or data but, when a user clicks the export or next page button, the report blanks out the data and shows the page count as 1/1 where it was 1/250 previously.
This does not occur every time, but seems to be happening to all users and some point and with multiple reports.
Has anyone else experienced this issue? We have tried restarting the page server and republishing the reports.

Motion menus/buttons blank out on burn

Trying to make motion menus or video background or buttons with video clip. After building/formatting and burning, the menus don't show up. The screen is white with sound only.
This doesn't seem to be a problem with still menus/backgrounds
Am I missing something?

John
In DVDSP Preferences, in the Menu options change the Final Rendering option from Hardware Based to Software BAsed, or vice versa. That means, change to the opposite you have now selected. Then rebuild your project and chek it.
It's a known pronlem that should be solved this way.
Hope that helps !
Alberto

Monitor backlight comes on briefly, then blanks out

I'm using a COMPAC PRESARIO laptop that's running WINDOWS XP. I've had the system 7 years & had a couple viruses that were supposedly cleaned up, but it was done by someone else so I'm not sure of this.
PROBLEM DESCRIPTION & CORRECTION EFFORTS TO DATE:
When the computer is turned on the COMPAC logo comes up, but soon blanks out, though not thoroughly on occasion, just goes real dark, with images faintly visible. Unfortunately, the behavior is not consistent, sometimes not lighting at all, other times as previously described, not visible at all, or visible up to WINDOWS logo page, then blank. If power is disconnected for 48 hours or better it will sometimes remain visible for a period of time, so long as it doesn't enter hibernation mode, though that trick hasn't worked recently; then the above problems repeat. I have connected a COMPAC FS7600 monitor to it to see if it is indeed a monitor problem, but that also blanks out after WINDOWS logo displays, prior to reaching log-in stage, the monitor power button going from the green it has while visible to the amber that signals a disconnect (I think). I've been forced to do hard shutdowns repeatedly, resulting in the "Windows encountered a problem with the last start-up" & have tried the "last working configuration" option, but that hasn't helped, so I'm at a loss on what to try next.
One of the answers here indicated the backlight could be replaced. If so, how would I go about that if it comes to that?
I am a freelance illustrator & writer, whose work & income depend on a working system, so I'm currently unable to produce the products clients desire; as such, this problem is imperative to correct. Any & all assistance will be greatly appreciated. Thank you.

Hello @darenderer ,
Welcome to the HP Forums!
I understand you're having issues with the display on your notebook going blank.
If the issue persists on an external monitor chances are the issue is not hardware related, though when it goes dim and is barely visible that does sound like a bad backlight which is kind of strange.
We can test this by trying to load the BIOS. If the BIOS loads and displays properly this would tell us the hardware is OK. To access the BIOS tap F10 while the notebook boots up. If this is displaying OK you may need to restore the default BIOS settings which is usually done with F9 while in the BIOS. You should see the keyboard shortcut in the bottom right corner of the screen to confirm this shortcut.
If the BIOS does not display you could be looking at a hardware issue. The issue being intermittent like this might suggest a bad connection to the backlight or display. You can see how to remove and reconnect these connections in the Maintenance and Service guide available in the User Guides section of your products support page here: HP - Drivers & Downloads.
It would help to know which product and operating system you are using. For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number? To see which version of Windows you are using click here: Which Windows operating system am I running?
Let me know if this helps!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

How do I play a video in full-screen mode on one screen of a dual-screen Windows 7 system without blanking out the other screen?

How do I play a video in full-screen mode on one screen of a dual-screen Windows 7 system without blanking out the other screen? Not losing the other screen would be useful as I would like to, for example, monitor my emails whilst watching a video or to work on a project whilst watching an instructional video.
Note : Resizing a window to fill the screen is not acceptable as it still leaves unsightly borders.

bump

MacBook Pro/Thunderbolt Monitor blanking out

I have a MacBook Pro with 2 Thunderbolt monitors. My system is connected up like this:
MacBook Pro (running in clamshell mode) -------> Thunderbolt Port on MBP -------> Thunderbolt Display ------> Built in Display Thunderbolt Cable ------>Thunderbolt Display 2.
I also have a Thunderbolt disk drive attached to a thunderbolt port on the back of display 2.
I have a couple of problems every now and then. At times that second display blanks out for a second. I have noticed, it is most likely to happen when I put some IO on that thunderbolt disk drive. It just seems to me like the bandwidth of thunderbolt should be able to handle this.
Secondly. Sometimes when I boot up, the system considers that second display as the first which screws up my screens. I usually have to reboot to get it to work right. I notice that if I boot up with my MBP open, the system always considers the 2nd monitor in the chain the first display. Seems like it would always default to the first monitor.
Any help you could provide would be appreciated,
Rob

The Thunderbolt drive should be the first device on the chain, with the Displays being the last devices on the chain.
That should solve both of the problems.
If not, call back or post in the Apple Thunderbolt Display forum.
Good luck,
Clinton

HT1688 My iphone keeps blanking out and then when I press then home button it tells me the battery is dead. it has happened to me at 30%, but today it was at 71%, is there a fix for this?

My iphone keeps blanking out and then when I press then home button it tells me the battery is dead. it has happened to me at 30%, but today it was at 71%, is there a fix for this?

This is often due to faulty battery. Make Genius reservation and take iPhone to Apple Store for free quick battery diagnostic testing.

TS3276 When I reply to an e-mail it comes out blank the other end?

I do not have problems sending e-mails but when I reply to an e-mail it sends but comes out blank the other end?

'''re: Forwarding'''
You have the option to forward the received email 'inline' or as an 'attachment'.
This can be set up here:
'Tools' > 'Options' > 'Composition' > 'General' tab
This is because you are not responding to a specific email - you are selecting to forward information from a different person to another person, which may be best sent as an attachment.
'''re: Reply'''
In this instance you have the option to either:
* include the received email in a reply
* Not include the received email in a reply
* include selected part (quote) of received email in reply.
A Reply implies a continued conversation and so the option to include the conversation is available.
This is set up here:
'Tools' > 'Account Settings' > 'Composition & Addressing' for the mail account.
But regardless of whether you choose to 'automatically quote the original message when replying' or not, you can always highlight a section of text and then click on 'Reply' to include only the selected section of text.
A Reply will also not include any attachments that were received attached to the original email because you do not need to send back the senders own attachments.
Otherwise you create a new 'Write' message and attach the original email, so it is not technically a Reply - you do not use the 'Reply' button and these emails will not be threaded. It makes it more difficult to see continuity of conversation.

MacBook Pro 9,1 External Monitor Blanks Out?

I have a 15-inch, Mid 2012 MacBook Pro with a 2.3 GHz i7 processor, which I purchased last December. For some reason my external monitors blank out about 1-3 times per day. As far as I can tell the symptons are not reproducable. It just seems to randomly happen.
Has anyone else had this problem and if so, what was the solution?
Thanks!

Are you sure it is not a hardware problem? A bad cable or a poor connection?
I would try this after eliminating hardware causes.
Go to System Preferences / Displays. Verify the settings are correct, and correct or not change them arbitrarily - just move the settings back and forth - and then set them back where you want them.
Now reset the PRAM:
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

My iphone blanked out and will not cut on i tried holding the power button and the home button any advice?

my iphone blanked out and will not cut on i tried holding the power button and the home button any advice?

Hey there mello12,
It sounds like you are not able to turn on your phone. You should use these steps in the following article to help resolve it, or setup service if needed:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for using Apple Support Communities.
Take care,
Sterling

Itunes showing all data as other and sync button greyed out

Itunes showing all data as other and sync button greyed out. I have downloaded and installed Itunes 11 (multiple times) and restored my phone twice already, but I am still not able to sync my Iphone 4 with Itunes.
When I select / de-select Apps on Itunes to remove from the phone the "Apply" button does appear, but after I click it nothing happens. Then the greyed out "sync" button just appears again.
Anyone with some advise please?

Try Restarting or Resetting your touch.
Restart: Hold the Sleep/Wake button until the red slider appears and turn off your iPod. Press the sleep/wake button and hold it until you see the Apple icon.
Reset: Hold the Sleep/Wake button and the Home button at the same time. The red slider will appear first, keep hold everything until you see the Apple icon. Release the buttons.
Check your iPod and see if your music and apps have reappeared. If they do after either option, then resync your iPod.
If neither works, then Restore your touch through iTunes.

Using Cap6, need to create menu screen that allows user to click a button, branch to other screens, and return to main menu. When returning to the main screen the button that was clicked will be grayed out or inactive. How do I do this? I created image

I am trying to emulate a piece of equipment. I need the user to be able to click on specific buttons that will take the user to another screen(s). After viewing those screens the user will be directed back to the main screen where the user would know which buttons had been pressed and which still needed to be pressed. I create image buttons with the 3 states - that worked except when the user returns the slide is reset and so the user does not see the 3rd state of the button. How can I get that 3rd state to stay after user returns to the main screen?

Hi Elizabeth,
Since I just did this morning what you are currently attempting to do, I thought I'd share my method. I must provide a disclaimer and tell you that I am not an expert in Captivate advanced actions--like you, I am still figuring them out. However, I am happy to share here anything I have learned thus far.
First, here is what my initial slide looks like (see interaction slide below). I created all of the icons (including the 'grayed out' icon on the second screenshot) in a few minutes using Adobe Illustrator. The icons have been imported as custom multi-state buttons so that I could have the desired effect when the user hovers over the image--the yellow 'explore' flag appears only when the mouse is over the icon. When the learner click either image, they are sent to the corresponding slide. Once both slides are viewed, a 'continue' button will appear at the base of the screen (something I've not figured out--I sent an email to Lieve begging for some guidance).
The initial slide (interaction slide):
Second, here is a depiction of what happens when the learner returns to the interactive slide from the content slide (see image below): Once the learner visits the 'Battery Content' slide and then returns to the interaction slide, the images have changed. The multi-state button is hidden (through the advanced action), the replacement image (the image with the completed banner over it) is shown, and a hidden click box to allow the user to return to the previously visited page (just in case they desire to do that) is "shown" to allow navigation since the button is no longer there (because it is magically hidden).
Content Slide 1:
Remember, there may be an easier way to do this in Captivate. I am using Cp6 for this module.
1. I created two user variables as follows
Name: v_batteryExplore
Value: 0
Name: v_fuelExplore
Value: 0
2. I created an advanced action for each as shown below (showing only one--duplicate the first and change the names to match the content):
Credit: I learned these steps from @Lilibiri and Dr. Pooja Jaisingh!
I have also noticed that it matters where the buttons are located on the timeline. It seems best to have buttons above all other content. Not sure why, but I have had images not appear when I have not done this.
And the last step you do not want to forget; you need to remember to tell Captivate to use the action.
As a final note, remember that the elements you do not want to appear on the initial screen must not be initially visible. Make sure to set them to invisible by removing the checkmark in the 'Visible in output' box located next to the button name. In my case, the image of the completed battery and the invisible button to allow a revisit of content was initially hidden. Here is a final screenshot of my timeline for this interaction. I hope this information helps you!

I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs so my 2008 version of Mac Office and Intuit Quickbooks are blanked out. I need these programs. How do I proceed?

I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs and has blanked out my 2008 version of MS Office for Mac and Intuit's Quickbooks. How do I proceed to get these programs back?

Upgrade to newer versions compatible with Lion or downgrade to Snow Leopard:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

Submit Button Greyed Out (v 4.0.5)

I have been using Compressor successfully for about a year. Recently it updated to v4.0.5. Now I am not able to submit, with the final Submit button greyed out. I have checked my Destination folder permissions and all appear correct.
What could be the cause of this, and what shall I do? I need to render a program urgently for broadcast.
Thanks
Geoff

I just resolved a similar problem. I am running OSX 10.6.8 on a MBP 13" 2010.
Once inside Compressor I'd click on "submit" and the drop down window would show "none" next to "Cluster:" and the submit button was greyed out.
I called Apple Care and they had me delete the preference file "com.apple.Compressor.plist" file from my user>library>preferences folder. This did not fix the problem on its own.
They then had me delete the Apple Qmaster folder from user>library>application support. This did not fix the problem on it's own.
I then reinstalled the Compressor application itself. This did not fix the problem on its own.
I then verified permissions and repaired permissions using disk utility. This did not fix the problem on it's own.
I then clicked on "Share Monitor" which is found on the Compressor task bar. "This Computer" was displayed in the left column. I simply clicked on it in order to high light it. I left the "Share Monitor" window open and went back to the submit panel and "This Computer" was now displayed next to "Cluster:" and the program is now working again.
YMMV.

Iphone 4 showed "searching" on top left corner, now blanked out- wont turn on, only when charger is plugged in.

Hi all, can someone help me please?
Yesturday "searching" appeared on top left hand corner of my phone.. i tried taking out the sim and inserting it, still the same. not long after that, the phone just blanked out! i plugged in the charger and the apple icon comes on and it just stays on that screen! ive tried holding reset button down together with home button for 10secs or more.. still no results. the apple icon just comes on n off when it is plugged into the charger. as soon as i take the charger off, the icon goes off and phone just completely goes off. i cant get it to work normally anymore. i've only had this for about 1 month now!!! Anyone know what's going on or what i could do to fix this please?

Hello E_Motuliki
If you can, try and put your iPhone into recovery mode and then use iTunes to restore it to see if it resolves all the issues that you are seeing with the service as well as the powering off.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G.

Expand button blanks out other monitors

Similar Messages

Maybe you are looking for