Expand/collapse options not working on IE 10

Hello Friends,
I have a document library grouped as per "Category" column and I display the same information as a web part on a web part page. Now when I try to expand the "Category" by clicking on "+" icon I get a message "Loading"
I have removed and re-added the web part again but I am still facing the same issue. I am using IE10 so does it have something to do with the browser?
I have come across this bug fix: http://support.microsoft.com/kb/2553117/en-us so is it applicable to both 32bit and 64bit versions of IE10?
Please suggest.

the hotfix you mention is for SharePoint not for IE.But if this is issue you are facing then you can patch your farm with this...but 1st
you please tell us what patch level or version of SharePoint 2010 you are( check from central admin > manager server in farm > you will see the config db version).
what IE version you are using & 32 bit or 64?
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Similar Messages

Post RH 9 Upgrade Expand All and Collapse All not working.

After upgrading to RoboHelp 9 from 7 - the Collapse All and Expand All is not working. I am taking over after attending a RoboHelp 9 Training Class a little over a week ago, so any help would be appreciated.

Hi,
What is your output? Where are the show/hide buttons placed: In the topic or in the toolbar? You're using RoboHTML right?
Did you use any kind of twisties in your RoboHelp 7 project? The show all hide all buttons are controlled by a custom script and I'd like to know which method you are using. (If you know which.) See also http://www.grainge.org/pages/authoring/twisty/twisty.htm
If you're not sure which method you are using, can you post the HTML of the show/hide all button/link?
Greet,
Willam

Expand/Collapse option in Portal - SP13

Hi everybody!!
We have EP7.0 NetWeaver 2004s and we upgraded the SP from 5 to 13. When SP13 was installed, the icon to expand/collapse doesn't work correctly (Detail Navigation in Navigation Panel in the Light Framework). The icon always send the user to the main and first page. With the SP5 it works well.
Do you have any idea about how can I solve this??
Thanks in advance for any help that you can give me!
Best Regards,
Claudia

Hi Claudia,
Take a look at this thread maybe it gives you some answers...
How to disable automatic loading of iView/Page in detailed navigation?
We have SP13 at this moment and its working "fine":
1. When clicking on the expand/collapse icon (the triangle) the first navigation node in this folder/workset is NOT loaded automatically.
2. When clicking on the text part of the link (the actual url) the first navigation node in this folder/workset IS loaded.
In addition to step 2 you can steer what navigation node is loaded by setting the parameter "Default Entry for Folder" this property is by default set to No.
Also take a look at the property: "Clicking Folder Name Launches First Node" of the Detailed Navigation iView.. Maybe this is by some reason got set properly...
Good Luck,
Benjamin Houttuin

Wifi option not working in my i phone 4s ios 7.0.2, how to fix it

wifi option not working in my i phone 4s ios 7.0.2, how to fix it

Now my wifi is working but not showing the wifi logo on the top

Tree node collapse is not working

Hi
I created tree node, i am able to display data in that node, But collapse is not working.
i kept this part of code in collapse event, event is triggering, but it is not collapsing.
DATA: lr_node     TYPE REF TO if_bsp_wd_tree_node,
        lv_size     TYPE sytabix,
        lv_index    TYPE sytabix VALUE 1.
DATA: lv_event_thtmlb TYPE REF TO cl_thtmlb_tree.
TRY.
      lv_event_thtmlb ?= htmlb_event_ex.
      typed_context->querynetrs->collapse_node( lv_event_thtmlb->row_key ).
    CATCH cx_root.
ENDTRY.
( or below part)
DESCRIBE TABLE me->typed_context->querynetrs->node_tab LINES lv_size.
WHILE lv_index <= lv_size.
    lr_node = me->typed_context->querynetrs->get_node_by_index( lv_index ).
    IF lr_node IS NOT INITIAL.
      lr_node->collaps_node( ).
    ENDIF.
    lv_index = lv_index + 1.
ENDWHILE.
please let me know why collapse is not working.
thanks
ram.
ram

HI Ram,
did you try to do a reread afterwards?
If you look at the component IBHIER view TreeEnhanced it uses a global variable node_modified that is set after the collapse.
Then afterwards in the DO_PREPARE_OUTPUT this variable is checked and used to reread the entity.
IF me->node_modified = abap_true AND me->entity IS BOUND.
    me->entity->reread( ).
ENDIF.
Maybe also add this part of coding in your method and in the DO_PREPARE_OUTPUT.
KR,
Micha

InfoPath 2013 - Rich Text box - Expand to show all text option not working

I have create an InfoPath form and created a view which will be used for printing. I have a rich text box in this print view and the scroll option for this rich text box is set to "Expand to show all text". However, it is not working and it doesn't
expand the size of the text box based on the content length.
same thing used to work in InfoPath 2010.
Any suggestions?
Thanks,
Neelesh

Hi Wendy,
Here are the steps I have used:
1. On default view added a rich text box.
2. Created another view called Print and mapped it to the same Field which I added to default view
3. Set the Wrap text and Expand to show all text on both the Rich Text Box Properties - in default view and in Print
view. Also set the height of the rich text box to auto.
4. Set the print views as the print view for default view
5. Deployed the form to SharePoint Form Library
6. Opened the form in browser
7. Entered the content in the rich text box in default view. It expands well if I have much content
8. Clicked on Print preview and that opens up the print preview and it shows the rich text box only one line in height and with scroll bar
I missed to mention that it is a web browser enabled form and I am using InfoPath 2013 and SP 2013.
It does work fine in InfoPath client.
Thanks.

Collapse stack not working

I just upgraded to Lightroom 3 and the collapse stack function is not working...it doesn't collapse a stack of photos, it just stays expanded no matter what I do, any suggestions please?? I see the 1 of 2 and 2 of 2 number in top left corner and when I click on that it starts to collapse the photos but then just goes straight back to expanded, it's driving me nuts! Help

Just being able to hide stuff that isn't top-of-stack has been enough for me so far.
I suppose it depends on how you do stuff, what might be enough.
Wanting HDR sequences regardless of which photo matched the search criteria is something I haven't given much thought to.
Maybe you could define something in your hdr shots that binds them together, maybe a unifying element in the filename, or metadata... then use that in the search criteria as well.
In my workflow, I would generally only want to see the top of an HDR stack in a collection, since that would be the finished photo. If I wanted to work on the sequence I could always go to the folder containing the whole set...
I'm sure if Adobe put their minds to it for a minute, they could come up with a solution better than the way things are now, which so far has been to completely ignore the issue.
PS - As I said, I don't have much of a problem with it anymore, since I keep StackPosition metadata for all my photos. But I feel for people who dont... and, a native solution would be better anyway...
Perhaps to cover your desires, a couple options:
"match bottom feeders as well" -- so collection criteria are not applied to top-of-stack photos only.
"bring everything in stack regardless of position" -- so all members of a stack are in the collection regardless of which item matches.
This would be overkill for me so far, but maybe one day I would be grateful...
Enough said,
Rob

'Get All New Data Request by Request' option not working Between DSO n Cube

Hi BI's..
Could anyone please tell me why the option ' Get one Request only' and 'Get All New Data Request by Request' is not working in DTP between Standard DSO and InfoCube.
Scenario:
I have done the data load by Yearwise say FY 2000 to FY 2009 in Infopackage and load it to Write-optimised DSO (10 requests) and again load Request by request to Standard DSO and activate each request. I have selected the option in DTP's to 'Get All New Data Request by Request' and its working fine between WDSO and SDSO. But not working between Cube and SDSO. While Execute DTP its taking as a single request from SDSO to Cube.( 10 request to single request).
Regards,
Sari.

Hi,
How does your DTP setting looks like from below options ? It should be change log, assuming you are not deleting change log data.
Delta Init. Extraction from...
- Active Table (with archive)
- Active Table (without archive)
- Archive ( full extraction only)
- Change Log
Also if you want to enable deltas, please do not delete change log. That could create issue while further update from DSO.
Hope that helps.
Regards
Mr Kapadia
*Assigning points is the way to say thanks*

Hierarchy Node Variable search (find) option not working

Hi Experts - I have created a hierarchy node varibale on a fixed hierarchy. When user run the report and click on hierarchy node variable selection option , A new window will pop up which has all the nodes.
As the list is quite big and has many levels , On the same pop up , we have find option , when we enter any node in the find box , its always give a ABAP Dump , It never works for me...
Is node find/search in not working in Bi 7.0 .
Thanks
R

Hi Rohan,
We can restrict the hierchey level at property of of the hiearchey enabled characteristic.
Hope this hels...let me know if u require any further info on this..
Best Regards,
Maruthi

Expand audio does not work in FCP X?

when I use expand audio from video (cntr-S) accoding to the helpto split video/audio it does not work; the audiowaveform disappears, there is no split in audio and video. Only the audio is functoning and then the colour is green.
A bug?

I just restarted the macbpro and the program, tried again and now it works.
thanks for your attention.
bruce

Complaint - Netflix and Youtube (internet option) not working on Apple TV 2 - Please advise

Netflix and Youtube (internet option) is not working on Apple TV 2 I bought - please advise how to fix this. Please note this is not to do with signing in as the internet menu and option to sign in is not given at all on screen/within ATV2. The only menu options which appear on screen are "computer" and "settings" and nothing else.
I have read from some other posts this may be because of the country in which I am located (currently the UAE) - this of course is not an acceptable excuse and if the real reason I hope Apple will fix this immediately. From the box I bought the description on the reverse side of the packaging clearly states "Plays movies and TV shows from Netflix, live and archived games from MLB, NBA, and NHL, and videos from YouTube and Vimeo".
If it is a country specific/territory issue then the packaging must be changed for countries in which this does not work as this product is being missold to customers, especially as having the option to stream Netflix, YouTube and Vimeo is one of its unique selling points - without which I would not have bought it in the 1st place!
Currently very disappointed in Apple (normally a complete Apple fan!)
Any help appreciated (positive comments only thank you).

In reply to the comment "You seem to be saying that the box that you have is different in some way". I'm actually not saying that at all as I have no idea what your box says and therefore can't comment.
And unless you're on the packaging design or distribution teams it would be a giant leap to presume every single box around the world is the same based on the product being the same.
As a marketing person I know companies of all sizes and shapes tailor their products to cater for individual markets. E.g. coca cola cans have different designs based on distribution location and languages used in particular countries and even the product itself can differ, although this may not be the case with Apple of course.
I'm simply describing what is on my box and I don't neccessarily mean to be abrupt however I certainly wouldn't waste my time typing on this forum to say the box says something when it actually does not.
Let me know if you can postively affect the outcome of this problem/help in someway and I'll be sure to send the image.
Thanks.

"Restore last view settings when reopening documents" option not working with all documents

Said option (found under Edit/Preferences, category Documents), which works like an automatic bookmark in that it takes you back to the same place you were at when you last closed a document, is very useful, but apparently doesn't work with *all* documents.
- Does anyone know what determines whether a given document works with this option or not?
- Is this by design or a bug? A matter of PDF format version?
- Is there a way to work around the problem?
I've compared two documents, only one of which works with the option, to determine what the relevant difference may be, and found two suspects (under File/Properties): the PDF version (1.5 in the document that works, 1.4 in the one that doesn't), and 'Fast Web View' ('yes' in the document that works, 'no' in the one that doesn't).
Thanks,
Michael

This seems to be a problem with some PDF files.
Suggested workaround: If the PDF you have allows "Save As", then try save-as to a new file. The "Restore last view settings when reopening documents" option should then work as expected (in the new file).
(Original post: Restore last view setting not working in version XI)

Ribbon options not working for SharePoint Central Administration

Hi,
I am able to see the options on the Ribbon of Central Administration, but clicking on the options is not working.
Have tried, Starting the Central Admin with Admin account, Setting user account control to never notify, adding the site to the trusted sites, resynced the SP servers time etc.
But nothing helped.
The ribbon is not working only for the Central Administration, it is working for web applications created.
I could not create a new web application, create a new service application, could not select a webapplication or simply i cannot do any thing on Central Administration.
Need help on this, Thanks in advance.

Couple of things, you can check..
1) Run the Internet Explorer as Administrator and then open CA,
2) make sure your Admin account is in Local Admin group,
http://epmgelist.wordpress.com/2013/06/14/central-administration-greyed-out-ribbons-and-missing-functions/
Check if UAC is enable or disable?
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

[Win-Ill10]Expand Pattern Swatch not working!

Hi all,
Im using VC++6.0,Illustrator 10 & SDK.Im trying to Expand a pattern swatch programatically.But it does not work.Here's the code snippet
AIErr error;
AIArtHandle path;
case kPattern:
error=sExpand->Expand(path,0);
break;
Please tell whats wrong!

you could do as follow:
//retrieve the pattern art fot a given AIColor (PatternColor).
AIArtHandle patternArt;
AIPatternStyle patternStyle;
patternStyle = color.c.p
result = sAIPattern->GetPatternArt(patternStyle.pattern, &patternArt);
aisdk::check_ai_error(result);
then, do a recursive treewalk for this patternArt!
this is done!

Expand/Collapse option in Portal iviews

Hello,
I am on EP7.0 NW04s and have problem with the Expand/Collapse Tray option for each of the services in ESS because when the user by some chance collapse the Tray and then logout and log back in and come to the same service it still shows collapsed .....rather than being Expanded ....So I want to know whether there is an option in the Portal to make the Default setting for the Tray as Expanded always unless the user change it to Collapsed....
Any help would be highly appreciated.

Hi,
In the iview properties -> initial state [open or close] -> Set it to Open
Then, Expand the property -> in the Inheritance [ sub property] [drop down] -> [set to] Locked in target object
Then, make the property End-User Personalization to Hidden -> save.
Please reward if found useful.
Cheers,
Mohan

Expand/collapse options not working on IE 10

Similar Messages

Maybe you are looking for