Expand field "confirmation name" SRM 5.0

Hello Guru´s!!
We to change the field "confirmation name" in SRM 5.0.
We need to expand the field to the maximum possible.
Any body know if it´s possible? I have no idea how we can do that, I mean, how look the field in SRM, the web dynpro , etc
Thanks a lot!
Regards!

Look at this strcuture INCL_EEW_PD_HEADER_CSF_CONF.

Similar Messages

  • Copy 'Confirmation Name' from SRM Confirmation to R/3 Documents

    We're using EBP 4.0 with R/3 4.7, ext. classic scenario.
    When confirmations are posted in EBP we want the information entered in the 'Confirmation name' field to be copied to the material document 'Header txt' field and to the service entry sheet 'Doc. text' field (for confirmations to service orders).
    We can do it for confirmations to standard orders, using an event to trigger a function module to check for the existence of the matl. doc. and update the field (with MB02).
    We're stuck on confirmations to service orders, as the transaction available (ML81) does not allow the 'Doc. text' to be changed.
    Any ideas please ?
    Thanks,
    Tim

    I had same requirement and went through many posts on SDN but didnt find a solution. So after some hours of debuggin found following.
    This question was asked long back but the information may be helpful for someone like me in future
    So ---
    ·         The Function module      META_SUSCF_SEND is responsible for
    1.       Mapping values from SRM (SUS) internal structures to external structures used in back end ECC(R3)  system
    2.       Call the driver function(BBP_SOAXML1_SUSCF_SEND) to deliver the SUS confirmation data to ECC(R3) system [ havent gone through this module but assumin it does ]
    ·         During the process of creating confirmation supplier will enter a custom text in confirmation field
    ·         In standard scenario the SRM system generated number is available in IS_HEADER-OBJECT_ID and the custom text added by supplier is present in IS_HEADER-REF_DOC_NO.
    ·         the OBJECT_ID field is taken to back end ECC(R3) system as ‘External Number’ in service entry sheet.
    ·         Hence by using an implicit enhancement option in function module ‘BBP_DOCUMENT_TO_EXT_MAPV’ transfer IS_HEADER-REF_DOC_NO to IS_HEADER-OBJECT_ID.
    ·         The enhancement should be restricted to confirmations only so following condition should be checked before data transfer
    Ø       IS_HEADER-PROCESS_TYPE = ‘SUCF’ AND IS_HEADER-SUBTYPE = ‘CF’       

  • Error while deleting/cancellation of Goods Confirmation in SRM

    Hi All,
    We are using SRM 4.0 & SAP R/3 4.6c in classic scenario.When we try to delete/cancel goods confirmation in SRM we are getting error "PU Ordered quantity is  exceeded by xx". I found OSS note 788475 for this, but this note is already applied in the system.
    Please tell me how to overcome this issue.
    Regards,
    Ajay Pakhale

    Hi MontyBurns,
    May I know what settings that I need to check in UGMDSYNC program? As far as I can tell, there is only one parameter that we need to specify in the program i.e. Field Name. As I am trying to synchronize from BCS to BW, I have chosen the followings settings:
    Source = LOCAL
    Target = ALLBW
    All,
    Interesting thing that I notice after executing the UGMDSYNC program is the following message:
    Synchronize/Display Variances Between Systems
         The compound dependencies for the attributes or texts are not defined
         uniformly in the systems investigated.
         Example:
         Texts are defined as language-specific in the local systems and as
         language-independent in remote systems (for example BW systems). The
         same can apply for other compounds such as version or time dependencies.
    System Response
         The display of differences between the systems will be affected. A
         manual synchronization will not be completely successful.
    Procedure
         1.  Ensure that the dependencies for the attributes and texts are the
             same in all systems.
         2.  Start the synchronization process again.
    Procedure for System Administration
    I can check the attributes and texts in BW via RSD1 by specifying InfoObject = 0COMPANY and checking the Master data/texts and Attribute tabs. But how do I check similar settings in BCS Workbench? I can't determine whether the Company text is language-dependent or not simply by displaying specific Company from Process View > Master Data > Consolidation Units > Company.
    Thanks.

  • Creating Expandable fields in Abobe Acrobat 9.0 professional

    Hello,
    I am in the process of converting a standard PDF file to a interactive one. The problem I am having is that some of the fields need to be expandable to accommodate needs of the application. I am using Adobe Acrobat 9.0 to convert the standard form into a PDF file to PDF interactive file.
    I have looked in Adobe Acrobat 9.0 Professional but I have not been able to find any documentation on how to expand the fields in the 9.0 Professional version.
      Can you tell me if the LiveCycle Designer has the ability to expand fields and if so how can I set up the document to create the expanded fields. I have reviewed the help documents but it not very clear as to how to go about accomplishing this task.
    I have attache the form that I like to expand.
    I would really appreciate some guidance in this area
    Thank you for your time
    Gary

    Hi,
    Yes, LC has expandaple fields.
    First you have to make your field multiline
    Second - make it expand:
    But you shaould remember tha field will be expanded only after you type smth in it and lost focus.
    BR,
    Paul Butenko

  • System status INCM is active while doing the confirmation from SRM

    Hi,
    User is getting the below error while trying to create confirmation in SRM for some of the PO's.
    Partner XXX not found
    System status INCM is active (Confirmation XXXX)
    Partner not found XXX (Item 1)
    The version is SRM 4.0 (Classic scenario). We have already checked the user profile and it is consistent in the system. The BP record for this user in table BUT000 is all fine. User is able to create the confirmation for other PO's. Also we have checked the G/L account for any posting period issue. Everything is fine. The error is coming while user is trying to do the confirmation for some of the PO's.
    Any help is highly appreciated.
    Warm regards,
    Aswini

    The error is coming while user is trying to do the confirmation for some of the PO's.
    Check these POs to see if any of the partners are invalid. You could do this through "process purchase order" transaction. Sometimes this error occurs when one or several of the PO partners no longer exist, e.g. left the company, etc.

  • Problem with flow of expandable fields

    Hi everyone,
    I have important problem with flow of expandable fields in table in dynamic PDF form. The issue I am talking about you can see at the top of column 3 on page 2 in PDF in link below.
    Here is uploaded PDF form and sample XML data (form has import button and is ReaderExtended that you can easily test it and see my problem):
    http://www.speedyshare.com/718224676.html
    Generally I have created table with 3 columns using Table object (each field has allow multiple lines selected and expand to fit).  It is closed in FormBody subform which is flowed subform.
    Row in table is repeatable and has “is allow to break page” setting set on.
    Sometimes when there is a lot of text and row page break there is problem with flow.
    For example text from one rows overlaps on text from next row.
    I tried to solve this problem by changing row height, indents, font size, line spacing but always when I thought that I have fixed it  I got another data which generated the same flow problem.
    Did anyone met this problem earlier and found solution to this issue? This is really important for me and I am really in dead end so any hints would be really helpful.
    I am using Adobe Livecycle Designer 8.1 and PDF form target is 8.
    I really appreciate any help in this problem.
    Thanks,
    Kamil Dłutowski

    I posted link to my form in my first post.
    Here it is: http://www.speedyshare.com/718224676.html

  • How to change field lebel name in R3 sales document

    Hi,
    I want to change the field label name in R3.I tried to change the name by using tcode:cmod in XD02.But it is not reflecting in XA02.But it is reflecting in VF02.I want those changes to be reflected in XA02 also.Please help me.
    thanks
    rahul

    In CMOD, Goto->Text enhancements->Keywords->change->
    Enter data element here and change the texts.
    This change would reflect entire system.
    Thanks,
    SKJ

  • How to make multi-box fields for name or address in a PDF form to be filled in?

    I would like to know how to make fields for name and address in a PDF form.
    I am now using Acrobat 8 Pro on Windows Vista. I have downloaded a form in the format of a PDF file. Basically it is just a file holding images of pages of the document, and there are no fields for me to type something on it using computer. This form will be used frequently by me, but I don't want to print it out and fill it in every time by hand. I want to fill it in in the computer and print copies of it when needed. The output will then be much more neat and tidy.
    I have seen PDF forms with blanks for typing name and address, which means the form can be filled in on the computer before printing. They are special, as these blanks allow users to type name and address with every character occupying a box in the field, which consists of ten boxes or so. These are not ordinary textfields. I want to make similar inputting field as well.
    Does anyone knows something about making these input fields with each character using 1 little box in the multi-box field? Any ideas are appreciated.

    Does anyone knows something about making these input fields with each
    character using 1 little box in the multi-box field?
    Use text fields with the comb of x characters feature.

  • Mass change for field Confirmation control Key in PO / SA

    Dear All,
    There is a need to do mass change in value for field Confirmation control Key in PO / SA. Some of them have PO history. If we have PO history system wont allow to change conf. ctrl key. Also since it is a production system we can not cancel previous po histories. This is in SAP 4.7 where we dont have mass change tcode for Scheduling agreements.
    Can we maintain the values thru table entries. like using se16n maintain entries check box. This option is greyed out. can we activate that & do this requirement.
    please suggest.

    hi Greetings!
    The confirmation control key can not be changed in the scheduling agreement if GR for item had already been posted. If the GRs can be canceled , it is possible to change the confirmation control in the SA item.
    Version 4.7 do not support Mass change of scheduling agreements, hence you have to either create a SCAT or BDC to perform the task.
    Gobinathan G

  • How to make a PDF form with expanding tabel or expanding fields, like in Word.

    How to make a PDF form with expanding tabel or expanding fields, like in Word.

    This is currently not possible in Formscentral. It is something we are working on for the future. Please stay tuned.
    Andrew Yarborough

  • Multiple Page flowed form with expandable field, causing a blank page

    I have a 3 page form with an expandable field on page 1.  I've set the pages up as flowable with positioned subforms and everything is working well, until you type a lot of info into the expandable field and it moves everything else in page 1 down to page 2, the problem appears after the text is moved, there is a huge blank space after the text that was moved.  Basically the rest of the information is moved to page 3 and then there is a page 4.  Hope this makes sense.
    Original - Page 1, Page 2, Page 3
    Expanded past the page - Page 1&2 (then big blank space), Page 3, Page 4
    I'd just like the pages to flow together so if the expanded box moves to the next page the sections just continue to follow without a huge blank space on page 2.

    It sounds as if some of your content is set to not allow page breaks within it.  Have you checked all containing sub forms for the option below?

  • Is it possible to create expandable fields in an interactive PDF? (not dropdown menus)

    Need to design an interactive PDF that has expandable fields for respondents to include more that one group of answers. Specifically, they will be asked to list all previous employment. Some respondents may have had 10 relevant positions. The form will get too long if I create fields for 10 responses. Hoping to find a way that fields will expand if a respondent needs them.

    Not really possible with PDF forms, unless you create an entire page
    dedicated to this and allow the user to spawn new copies of it as needed.
    On Thu, Mar 5, 2015 at 9:06 PM, deborahs98069952 <[email protected]>

  • How to make expandable field in pdf forms?

    Does anyone here know how to make expandable field in a PDF form?
    I want the field, originally appear to be a 1-liner, to expands when you put in more text and everything that is underneath the expandable field shifts or moves down.
    pls help.
    Thanks!

    No, LiveCycle Designer is not included in Creative Cloud and is available only for Windows. It was included with the Windows version of Acrobat Pro before Acrobat 11 but is now a separate program and about $300.

  • White space after flowed layout/expandable fields?

    Hi,
    I have a few pages on a form with a flowed layout where the text fields expand.The problem I am having is when the text field expans and continues on the following page,its leazing an entire white space right after it.Is there a way to do this so eventhough the text field expands onto the next page,the content on the next page continues right after the expanded field without a page of white space?
    Thanks.

    Hi,
    You need to check Allow page breaks within content option for the subform. Object > Subform >  Allow page breaks within content.
    By default even for the field this option would be checked if it is not You need to do samething even for the field.
    This would work.
    -Vjay

  • Expandable field should print at top of next page not in middle.

    I have a report that has three expandable columns in the middle of the report. Each has its own frame. There is repeating and non-repeating frame above these three expandable fields. I want these fields to print at the top of the next page when they expand not in the middle where they are initially on the first page.

    I solved this myself by changing the vertical elasticity of the fixed frame above these fields to variable.

Maybe you are looking for