Expand RAM using ExpressCard?
I LOVE my mac book pro. I am sorry to see others are having problems.
I have 2 GB Ram in the machine. I just got an ExpressCard/34 memory card reader from Atech. I can buy a 4 GB Memory Stick from Sony that will fit the ExpressCard/34 memory card reader.
Some tech Guru out there, tell me how to do this: How do I tell the OS to use the ExpressCard slot for virtual memory instead of the hard disk? Seems to me that will provide a lot of extra processing speed when working with RAW photos and other RAM intensive tasks.
Can?
"no. he is not mistaking and the proof of that are the new hybrind hard drives that are coming out with built in flesh memory instead of regular drive cache.
flash device can consistently read at 100 Mbs and write at around 18 Mbs. A good hard disk's read performance will vary around 29 - 53 Mbs depending on where the data is on the platter."
If your information is correct, then I was indeed correct in saying that the write speed of flash memory is slower than than the average hard drive. 18 Mbs < 29 Mbs, right?
Also, you wrote Mbs when I think you must have meant MBs. The convention is: b=bits and B=Bytes. Last time I checked, a 7200 RPM laptop hard drive has a write transfer rate of about 40 MB/s. In contrast, the Sony memory stick, which was the subject of the original message, has a write speed of about 1 MB/s.
So, I'm sticking to my contention that the write transfer rate of flash memory is substantially less than that of the modern laptop hard drive. Do you have a link to a flash memory device that has a write speed on the order of 40 MB/s? I'd be happy to eat crow if you could show me such a device.
Power Mac G4 (AGP) 500MHz Mac OS X (10.4.7)
Similar Messages
-
System expanding to use all RAM when idle
Just had my Mac Book at the Apple Store for tests because the fan was running a lot & computer was running really slow. They found no hardware problem but suggested my problem was that the 2G of Ram was not enough because the system with nothing open was using over 75% of the RAM. Installed 4G of RAM, now 2 days later, having restarted the computer several times, the system has expanded to using 80% of the RAM with just Safari open. Anyone else having this problem.. open to suggestions. Have reset the PRAM, Reset SMC, ran long harddrive test, had it to the Apple store, had them run there tests on?? This is a 13' Mac Book (late 2007) model, running Snow Leopard 10.6.8 with UTD software, now with 4G of RAM using 3.81G of RAM with just Safari and the Activity Monitor open. Thoughts, suggestions, cures .. all would be appreciated!
Thanks!You can find out which application is eating up your memory in Activity Monitor. Selet "All Processes" from the drop down on the right side of the window (next to the search field). Then click on the header for the column marked "Real Mem". This will list all of the process running sorted by how much memory they are reserving, and will give you a clue as to where the problem is.
What web pages do you have open in Safari? Safari can grab large amount of memory depending what kind of plugins a particular site uses. -
I am having a problem with very slow start up after expanding RAM on my 2009 Mac Pro.
I am having a problem with very slow start up after expanding RAM on my 2009 Mac Pro (8 Core 2.93GHz). When I run the Mac Pro with 2 x 2Gb RAM it takes 4 seconds before the gray screen, chime and spinning wheel appear.However when I expand the RAM to 20GB the grey screen and chimes appear after a long 20+ second black screen.
The RAM modules are paored 2 x 4GB Crucial CT51272BA1339.M18FMR and 6 x 2GB SAMSUNG M391B5673FH0-CH9, all DDR3 ECC.
Reading articles on the internet, I thought it may be damaged RAM modules, but I have completed memtest and all are okay. I have tried changing the pairs around and if I use any paired 2 modules the Mac Pro starts normally, only when I try running more than 2 modules the delayed start up happens. (black screen 20 Seconds)
I also have tried PRAM and SMU resets after changing the RAM setups, and the issues always occurs when I have more than 2 modules. As you can see I have 6 SAMSUNG modules and even with identical modules the issue happens, when increasing the RAM to more than 2 modules.
The Mac Pro runs fine after the start up screen and can see all the modules, but has anyone else come across this issue, or have any ideas as to why my Mac Pro is taking 20 seconds to start up with 20 GB RAM?Hi there. Thanks for your comments.
I have tried all the different combinations of RAM setup, and as stated in my initial topic, the Mac Pro boot up time only slows when I have more that 2 modules. Where I place these does not seem to make a difference.
I have taken the Mac Pro to an Apple Reseller technician yesterday and they where not able to find any RAM errors. Apparently the boot up time is within Apple's acceptable parameters for this set up.
Could anyone that is running a Mac Pro 2009 with more that 4 modules of RAM, please let me know if the boot up time is normal. ( the time it takes from pressing the power button to seeing the gray screen around 16 - 20 seconds)
Or is anyone else having the same issues?
thanks for your responce -
Ram related kernel panics on a MBP (ram used to work, hardware errors-)
hello all
i have a 2.2GHZ intel core duo 2007 MBP, which once ran Tiger and is now running 10.6.3
I had the NVDIA graphic card break down associated with such models, and it was replaced thanks to the extended care plan, here in Paris, so the logicboard is new- I also got a (technician installed) new HDD, and snowleopard
I originally had the 2 1Gig ram, but 1st got an extra 2Gb of danelec ram, and finally another 2GB- it ran fine for a couple year or so-
then, a few months back I recently started getting kernel panics, on tiger- I fist thought they were HDD related, got a new drive installed by a technician, switched to snow leopard-
yet they continue, and they're apparently RAM related, yet what is odd is that they can be reproduced with any RAM combination involving 2 sticks- the original apple 1Gb + any of the two GB ram sticks, the 2GB ram sticks together in any slot-- it's all the same, the screen goes grey and i'm told to shut down the computer
with one ram stick it works, this avoids the issue- but not always
i've moved the ram around, checked the slots, reset the PRAM,yet the issue is still there.
now i know that I should be using paired ram, and will do so in the next coming months when I can afford it- yet what has happened to make the make the MBP seemingly refuse two sticks of RAM when it didn't before ? are the two sticks dead ? or is there an issue with the slot ?
I'd also need to know that this is not a logicboard issue if it's possible- the logic board was changed due to the NVDIA bug, so it's a year old or so-
I'm running it on the 2GB danelec as I type, no issue, the samsung ram works as well, and so does the 1GB apple ram, in any slot, yet two slots of ram causes the kernel panic crash- the area near the ram slot also seems to get very hot-
I ran the hardware test yesterday, booting from the tiger dvd, which was difficult (possible drive issue)
finally managed to boot into hardware test mode (must be a superdrive issue)
running an extended test with the 4GB of ram in there
first pass found an error :
4MEM/9/40 000 000 : bc13950
running the extended testing
extended testing (1h39 min)
no errors found
ran another quick test
error
4MEM/9/40 000 000 : 6b506C4
another quick test :
no trouble found
another : no trouble found
and a last pass : no trouble found
but i did have two errors...
looking the errors up online didn't give anything so far, any clue as to what might be wrong here ? the RAM used to work fine (i've been using these two sticks for over two years), the kernel panics started happening on tiger- got a new HD drive a month ago, installed snow leopard, - used disk warrior and disk utilities, reset the PRAM and did the other tests and it continues- wether i'm running the computer from the internal drive or an external firewire drive-
running the hardware test, i also got two error messages, but on some passes only
if i look into the RAM status through about this mac, it says it's ok - what's odd is that the hardware test found errors, but not systematically----- I'd really like to know what the error message mean, can anyone help ?
i'm getting more and more kernel panics, unfortunately i live in France, so things are slightly less simple than they would be in other places customer servicewise- ie it might not be as simple as showing up at the new apple stores with this 2007 machine--
I need a stable machine to work on and really can't afford repairs at the moment
i'm really stuck with this, my finances got sucked into the last HDD upgrade (got it done by an official apple retailer, ICLG here in Paris, cost me 300 euros), and I thought things would be stable for a while since the logic board was changed (free of charge, which was a great relief) less than a year ago due to the nvdia bug- and now here I am with this--
anyway, here's the last kernel panic report i got, thanks in advance for your help
ben
Interval Since Last Panic Report: -28202 sec
Panics Since Last Report: 6
Anonymous UUID: FD865E22-C8DD-4791-889D-B5E5B374745E
Tue May 25 18:53:11 2010
panic(cpu 1 caller 0x55507c): "!pageList phys_addr"@/SourceCache/xnu/xnu-1504.3.12/iokit/Kernel/IOMemoryDescriptor.cpp:1 412
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x36413718 : 0x21b449 (0x5ce420 0x3641374c 0x2238a5 0x0)
0x36413768 : 0x55507c (0x5d7af8 0x320 0x36a20b4 0x320)
0x364137e8 : 0x54c208 (0x5f03300 0x3 0x560a200 0x80)
0x364138c8 : 0x54c733 (0x560fd80 0x80 0x54c81c 0x54c94c)
0x364138f8 : 0x129e3ba (0x560fd80 0x36413960 0x36413948 0x36413968)
0x36413988 : 0x12a7d67 (0x560a300 0x5f03300 0x0 0x1000)
0x364139d8 : 0x12a8edb (0x560a900 0x560a300 0x602d100 0x0)
0x36413ab8 : 0x1281448 (0x560a900 0x602d100 0x36413b28 0x36413b24)
0x36413b58 : 0x12a8c63 (0x560a900 0x5e59700 0x2 0x0)
0x36413bb8 : 0x12a9716 (0x560a900 0x560a300 0x36413be8 0xed5570)
0x36413c28 : 0x1298939 (0x560a900 0x36413c5c 0x0 0x54c94c)
0x36413c88 : 0x1296569 (0x560dc00 0xffc1 0x36413da8 0x36413cb8)
0x36413cc8 : 0xedc2cf (0x560dc00 0xffc1 0x36413da8 0x36413d08)
0x36413d28 : 0xebec0e (0x560ca40 0xffc1 0x36413da8 0x36413d68)
0x36413d88 : 0xebedb8 (0x54a2000 0xffc1 0x16 0x305c420c)
0x36413e48 : 0xf0d9f0 (0x54a2000 0x305c420c 0x6 0x3)
0x36413ea8 : 0xf02da0 (0x553cf40 0x1 0x5466c58 0x0)
0x36413f08 : 0x5478e3 (0x54af000 0x553a700 0x1 0x5413300)
0x36413f58 : 0x546914 (0x553a700 0x603969c 0x36413f88 0x227155)
0x36413f88 : 0x546d6e (0x5413cc0 0x6039680 0x36413fc8 0xffffffff)
0x36413fc8 : 0x29e6cc (0x5413cc0 0x0 0x10 0x5a05904)
Kernel Extensions in backtrace (with dependencies):
com.apple.iokit.IOFireWireSerialBusProtocolTransport(2.0.1)@0x12a6000->0x12aafff
dependency: com.apple.iokit.IOFireWireFamily(4.2.6)@0xeb7000
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(2.6.2)@0x127b000
dependency: com.apple.iokit.IOFireWireSBP2(4.0.6)@0x1295000
com.apple.iokit.IOFireWireSBP2(4.0.6)@0x1295000->0x12a5fff
dependency: com.apple.iokit.IOFireWireFamily(4.2.6)@0xeb7000
com.apple.iokit.IOSCSIArchitectureModelFamily(2.6.2)@0x127b000->0x1294fff
com.apple.driver.AppleFWOHCI(4.5.7)@0xefa000->0xf1ffff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
dependency: com.apple.iokit.IOFireWireFamily(4.2.6)@0xeb7000
com.apple.iokit.IOFireWireFamily(4.2.6)@0xeb7000->0xef9fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10D578
Kernel version:
Darwin Kernel Version 10.3.0: Fri Feb 26 11:58:09 PST 2010; root:xnu-1504.3.12~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
System uptime in nanoseconds: 38155557254
unloaded kexts:
(none)
loaded kexts:
com.paceap.kext.pacesupport.snowleopard 5.7.2 - last loaded 34201995231
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleHDA 1.8.4fc3
com.apple.driver.AppleUpstreamUserClient 3.3.2
com.apple.driver.AudioAUUC 1.4
com.apple.driver.AirPort.Atheros 422.19.10
com.apple.driver.AppleGraphicsControl 2.8.56
com.apple.driver.AppleBacklight 170.0.16
com.apple.driver.AppleLPC 1.4.11
com.apple.GeForce 6.1.0
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.kext.AppleSMCLMU 1.5.0d1
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleIntelYonahProfile 14
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPISMCPlatformPlugin 4.1.1d0
com.apple.driver.AppleUSBTrackpad 1.8.1b1
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.1b1
com.apple.driver.AppleUSBTCKeyboard 1.8.1b1
com.apple.driver.AppleIRController 303
com.apple.driver.CSRHIDTransitionDriver 2.3.1f4
com.apple.driver.initioFWBridge 2.5.3
com.apple.driver.StorageLynx 2.5.3
com.apple.driver.Oxford_Semi 2.5.3
com.apple.driver.LSIFW500 2.5.3
com.apple.driver.IOFireWireSerialBusProtocolSansPhysicalUnit 2.5.3
com.apple.iokit.SCSITaskUserClient 2.6.2
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.1
com.apple.driver.AppleUSBHub 3.9.6
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.driver.AppleAHCIPort 2.1.1
com.apple.driver.AppleFWOHCI 4.5.7
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 3.9.6
com.apple.driver.AppleUSBUHCI 3.9.6
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleACPIButtons 1.3.2
com.apple.driver.AppleSMBIOS 1.5
com.apple.driver.AppleACPIEC 1.3.2
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 104.3.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 104.3.0
com.apple.driver.AppleHDAPlatformDriver 1.8.4fc3
com.apple.driver.AppleHDAHardwareConfigDriver 1.8.4fc3
com.apple.driver.DspFuncLib 1.8.4fc3
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.iokit.IO80211Family 310.6
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.nvidia.nv50hal 6.1.0
com.apple.NVDAResman 6.1.0
com.apple.iokit.IONDRVSupport 2.1
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.0
com.apple.iokit.IOBluetoothSerialManager 2.3.1f4
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.7.6fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleHDAController 1.8.4fc3
com.apple.iokit.IOGraphicsFamily 2.1
com.apple.iokit.IOHDAFamily 1.8.4fc3
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.1.1d0
com.apple.driver.CSRUSBBluetoothHCIController 2.3.1f4
com.apple.driver.AppleUSBBluetoothHCIController 2.3.1f4
com.apple.iokit.IOBluetoothFamily 2.3.1f4
com.apple.iokit.IOUSBHIDDriver 3.9.6
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.2
com.apple.driver.AppleUSBMergeNub 3.9.6
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.0.1
com.apple.iokit.IOFireWireSBP2 4.0.6
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.2
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOATAPIProtocolTransport 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.2
com.apple.iokit.IOUSBUserClient 3.9.6
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOAHCIFamily 2.0.3
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 3.9.6
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.2
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 283
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3.2
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 2 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.10
Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: SAMSUNG HM250HI, 232,89 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021b, 0x5d200000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
FireWire Device: OXFORD IDE Device 1, Macpower, Up to 400 Mb/sec
FireWire Device: OEM ATA Device 00, OEM, Up to 800 Mb/seccrashes are continuing - can anyone help out ?
thanks
ben
Interval Since Last Panic Report: 1184223 sec
Panics Since Last Report: 15
Anonymous UUID: FD865E22-C8DD-4791-889D-B5E5B374745E
Fri May 28 21:24:56 2010
panic(cpu 0 caller 0x2a8ac2): Kernel trap at 0x0027a72b, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000004, CR3: 0x00100000, CR4: 0x000006e0
EAX: 0x00000000, EBX: 0x0000007e, ECX: 0x091f0000, EDX: 0x00000000
CR2: 0x00000004, EBP: 0x56f43378, ESI: 0x048077c4, EDI: 0x00000000
EFL: 0x00010297, EIP: 0x0027a72b, CS: 0x00000008, DS: 0x0d8c0010
Error code: 0x00000002
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x56f43178 : 0x21b449 (0x5ce420 0x56f431ac 0x2238a5 0x0)
0x56f431c8 : 0x2a8ac2 (0x590478 0x27a72b 0xe 0x590642)
0x56f432a8 : 0x29e9a8 (0x56f432c0 0x20b35a20 0x56f43378 0x27a72b)
0x56f432b8 : 0x27a72b (0xe 0x48 0x56f40010 0x10)
0x56f43378 : 0x26c7dc (0x48077c4 0x0 0x6a300dc 0x6a300dc)
0x56f433c8 : 0x26cfd8 (0xd8c6f38 0x0 0x56f43458 0x2339ff)
0x56f433f8 : 0x26d256 (0x47ee6000 0x0 0x0 0x0)
0x56f43418 : 0x26de86 (0xd8c6f40 0x11000 0x0 0x25bdc1)
0x56f43458 : 0x260c3b (0xd8c6f38 0x30f383c 0x0 0x11000)
0x56f43588 : 0x260e32 (0x47ef7000 0x0 0x1 0x0)
0x56f435c8 : 0x259bfe (0x2ba8d74 0x47ee6000 0x0 0x47ef7000)
0x56f43608 : 0x220273 (0x2ba8d74 0x47ee6000 0x10005 0x53c5)
0x56f43628 : 0x22042a (0x47ee6000 0x10005 0x995720 0x10000)
0x56f43648 : 0x9931fa (0x47ee6000 0x10005 0x8115380 0x47ee6004)
0x56f43728 : 0x994941 (0x20000 0x0 0x10000 0x1)
0x56f437b8 : 0x994fb2 (0x9858304 0x20000 0x0 0x10000)
0x56f43c28 : 0x3105ea (0x87c268c 0x8077b00 0x7f1ec24 0x20000)
0x56f43c88 : 0x3121dd (0x20000 0x0 0x10000 0x0)
0x56f43d58 : 0x423e1a (0x56f43dfc 0x56f43dbc 0x87747e0 0x2f797261)
0x56f43dd8 : 0x2fafad (0x56f43dfc 0x3 0x56f43e28 0x57c50e)
0x56f43e28 : 0x2efffc (0x87c268c 0x56f43ec4 0x0 0x56f43f54)
0x56f43e78 : 0x49444a (0x86b6b20 0x56f43ec4 0x1 0x56f43f54)
0x56f43f18 : 0x494a8d (0x56f43f54 0x86b6b20 0xb0183f64 0x0)
0x56f43f78 : 0x4ec84e (0x87cf2a0 0x88fbd90 0x88fbdd4 0x0)
0x56f43fc8 : 0x29eef8 (0x893ee20 0x0 0x10 0x0)
Kernel Extensions in backtrace (with dependencies):
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib(1.0.0d1)@0x991000->0x99 6fff
BSD process name corresponding to current thread: firefox-bin
Mac OS version:
10D578
Kernel version:
Darwin Kernel Version 10.3.0: Fri Feb 26 11:58:09 PST 2010; root:xnu-1504.3.12~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
System uptime in nanoseconds: 2721283483111
unloaded kexts:
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.2 (addr 0x56c88000, size 0x98304) - last unloaded 1855762560735
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.3d0 - last loaded 1269444306258
com.apple.driver.AppleHDA 1.8.4fc3
com.apple.driver.AudioAUUC 1.4
com.apple.driver.AirPort.Atheros 422.19.10
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleUpstreamUserClient 3.3.2
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.GeForce 6.1.0
com.apple.kext.AppleSMCLMU 1.5.0d1
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.ACPISMCPlatformPlugin 4.1.1d0
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.AppleLPC 1.4.11
com.apple.driver.AppleBacklight 170.0.16
com.apple.driver.AppleUSBTrackpad 1.8.1b1
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.1b1
com.apple.driver.AppleUSBTCKeyboard 1.8.1b1
com.apple.driver.AppleIRController 303
com.apple.iokit.SCSITaskUserClient 2.6.2
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleFWOHCI 4.5.7
com.apple.iokit.IOAHCIBlockStorage 1.6.1
com.apple.driver.AppleAHCIPort 2.1.1
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBHub 3.9.6
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBEHCI 3.9.6
com.apple.driver.AppleUSBUHCI 3.9.6
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleACPIButtons 1.3.2
com.apple.driver.AppleSMBIOS 1.5
com.apple.driver.AppleACPIEC 1.3.2
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 104.3.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 104.3.0
com.apple.driver.DspFuncLib 1.8.4fc3
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.iokit.IO80211Family 310.6
com.apple.driver.AppleHDAController 1.8.4fc3
com.apple.iokit.IOHDAFamily 1.8.4fc3
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.0
com.apple.iokit.IOBluetoothSerialManager 2.3.1f4
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOAudioFamily 1.7.6fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.IOPlatformPluginFamily 4.1.1d0
com.apple.driver.AppleSMC 3.0.1d2
com.apple.nvidia.nv50hal 6.1.0
com.apple.NVDAResman 6.1.0
com.apple.iokit.AppleProfileFamily 41
com.apple.iokit.IONDRVSupport 2.1
com.apple.iokit.IOGraphicsFamily 2.1
com.apple.driver.CSRUSBBluetoothHCIController 2.3.1f4
com.apple.driver.AppleUSBBluetoothHCIController 2.3.1f4
com.apple.iokit.IOBluetoothFamily 2.3.1f4
com.apple.iokit.IOUSBHIDDriver 3.9.6
com.apple.driver.AppleUSBMergeNub 3.9.6
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.2
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOATAPIProtocolTransport 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.2
com.apple.iokit.IOAHCIFamily 2.0.3
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBUserClient 3.9.6
com.apple.iokit.IOUSBFamily 3.9.6
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.2
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 283
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3.2
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.10
Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: SAMSUNG HM250HI, 232,89 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021b, 0x5d200000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000 -
Have MacBook Pro (ancient) has
2.16 Ghz Intel Core Duo with
1 GB 667 MHz RAM
using OS 10.4.11.
Can I upgrade OS? If so, how far?
And can I add more memory?
I realize this is an old laptop but I need to wait to upgrade to new.if it is the core duo, mac OS X 10.6.8., max ram 2gb.
-
I have Mac OS X 10.5.8 on mid-2009 Macbook Pro (683MB RAM used, 81.67GB free space), do I need additional RAM to update to Snow Leopard?
I was told I can update to Snow Leopard without adding RAM but just read on another discussion thread that someone with the same age Macbook Pro that I have was told to purchase more RAM then update to SL.
Serial # W8*******6D
Model Identifier: MacBookPro 5,5Thanks!
I ordered 4 GB from crucial.com, product info below. Do you know if it will be 1 or 2 sticks? If only 1, will I be able to use the original 2 GB installed in the machine and the 4 GB from crucial.com?
Part Number: CT4G3S1067M
Module Size: 4GB
Package: 204-pin SODIMM
Feature: DDR3 PC3-8500
Specs: DDR3 PC3-8500 • CL=7 • Unbuffered • NON-ECC • DDR3-1066 • 1.35V • 512Meg x 64 • lead free • halogen free • for Mac -
Photoshop cs5 is spiking ram use and lagging
When I open Photoshop CS5 its sitting idle with nothing open and still using 330,000 MB of ram.
After opening a simple file, fairly small, 40 MB. It jumps its ram use to almost 2 gigs. It then lags very badly when I try to save taking almost 10 min to save a 40MB file. What is going on? I have 4 gigs of ram. Suggestions?function(){return A.apply(null,[this].concat($A(arguments)))}
Hayes27 wrote:
When I open Photoshop CS5 its sitting idle with nothing open and still using 330,000 MB of ram.
330 MB maybe. Not out of the ordinary. This is not svelte software.
function(){return A.apply(null,[this].concat($A(arguments)))}
Hayes27 wrote:
After opening a simple file, fairly small, 40 MB. It jumps its ram use to almost 2 gigs.
Not sure what you mean by "40 MB"... How big is the file in pixels and on disk as a .psd file? Does it have a lot of layers?
A file with a lot of layers can take a long time to save, though 10 minutes is rather excessive.
I did as you said and opened a 40 MB .psd file containing one layer, and Photoshop's commit size went up to 1 GB. Not too surprising.
You can probably adjust Photoshop's memory usage in the Edit - Preferences - Performance menu and get better performance. If you're running a 32 bit operating system you won't be able to use all 4 GB though. Photoshop drives a lot of people up to using an x64 operating system.
Make sure you shut down and restart Photoshop after making RAM option changes.
What else do you have running on your system? Is the RAM being used up by other apps?
-Noel -
Weird RAM issue , NEGATIVE ram used? anyone seen this before ?
PLS HELP , HOW DO I FIX THIS ? Negative ram used?????
Solved!
Go to Solution.Download SUS and repair:
http://www.sonymobile.com/gb/tools/update-service/
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien -
RAM using higher after upgrade OS X 10.9
RAM using higher after upgrade the OS X 10.9 in MacBook Pro 13 (2011).
Still its using atleast 4GB RAM normally after the startup...! then 2 -3 apps in use the it take more RAM 5.30Gb out of 8GB...!!
But Still Mac working Faster..
ThanksNow I'm testing... These all apps as same time... RAM using 7.98 Gb out of 8GB
But Mac Still FASTER>>>!!
Mail
Safari with 5 tabs
Firefox with 5tabs
Chrome with 5tabs
iTunes
iBooks
Maps
Calender
PhotoBooth
Preview
iMovie
iPhoto
Activity Monitor
uTorrent
Skype
Adobe Audition
Final Cut Pro
Awesome..!! -
Order of Faders, RAM use of EXS, BFD 1.5 v BFD 2
Hi All -
Couple things.
1. I cant seem to re-order the channel strips in the mixer window. Tried all keys, positions etc.
Anyone know how to simply move them around?
2. I read that the new EXS allows you to allocate more RAM, e.g. outside Logic. Is this a fact? Ive tried the virtual memory settings in EXS, and Im not seeing it come up separately in the Monitor application? Looks like when I load it, it simply increases RAM use of Logic.
3. Ive got both BFD 1.5 and BFD 2. Only BFD 2 seems to show up as an instrument. I cant seem to see BFD 1.5 for use as a rewire instrument. Any thoughts?
THANKS!You've got 3 different jQuery libraries. You only need one.
Replace all these
<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.5/jquery.min.js"></script>
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.9.0/jquery.min.js" type="text/javascript"></script>
<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.8/jquery.min.js"></script>
With this at the top.
<!--jQuery latest core library-->
<script type="text/javascript" src="http://code.jquery.com/jquery-latest.min.js">
</script>
<!--help for older plugins-->
<script src="http://code.jquery.com/jquery-migrate-1.1.0.js"></script>
Nancy O. -
Hi all
I have been playing around with memory settings for AE CS5.5 and taking some advice from here:
blogs.adobe.com/toddkopriva/2010/10/please-try-recommended-memory-settings-for-after-effec ts-cs5-and-give-feedback.html
and here:
http://forums.adobe.com/thread/734343?start=0&tstart=0
With variety different compositions, and different memory settings I have noticed my 'RAM: % used of 24GB' in my Render Queue window (at the bottom of the window) is always pretty low. Anything between a few % and 25% ish.
Is this just showing me the RAM used for the foreground CPU and not the collective CPUs?
Any info is much appreciated.
Cheers
AWhat happens with MP processing is that one CPU renders a frame and at the same time the other CPU's try and render other frames at the same time. You don't get multiple CPU's working on the same frame. AE doesn't work like that. Most MP aware software doesn't either. The standard multi threading usage is to divide up the tasks and send them to a CPU to complete. AE's 'task' is to render a frame. The MP processing in AE isn't smart enough yet to divide up a frame into pieces and send the pieces all to the renderer. I've been asking for line rendering for a long time. AE builds a whole frame at a time as a single process. That's why AE's MP rendering is a little wiggie. (wiggie is almost buggy)
I'm also saying is that if your project is MP compatible that each CPU can render a frame at a time and that more than one frame may be rendered simultaneously, but if there is anything in your project that is not MP aware each CPU will try and render, get confused because the something like a codec or an effect is not MP aware, and the system will hang until it gives up and tries to render with one CPU. When that frame is rendered AE will start over with the next frame try and send multiple frames to multiple CPU's and try to render multiple frames simultaneously, get confused, fail, and finally render a frame with 1 CPU and then start the process again. This is why throwing in an effect that is not MP aware for one shot that only lasts 10 frames in the middle of a comp would, without that effect, efficiently use MP rendering will cause the render to hang up and dramatically increase render time or fail completely. That's why I seldom of ever have it turned on. -
SQL Server 2014 Standard, but only 2 GB RAM used
Hello,
I just installed MS SQL Server 2014 Standard Single x64 on a Windows 8 PC. It was bought to replace the Server Express because the RAM limitation of Express.
I set min server memory to 500 MB and max server memory to 28672 MB. PC has 32 GB Ram.
Now I start a very crazy procedure/query that is running for hours.
The problem is now that task manager shows:
- SQL Server Management Studio (32 Bit): 0% CPU and 135,4 MB RAM
- SQL Server Windows NT - 64 Bit: 60% CPU and 2.032,6 MB RAM
If I use: SELECT * FROM sys.dm_os_process_memory I get:
physical_memory_in_use_kb : 2124632
memory_utilization_percentage : 100
So why is there Management Studio 32 Bit if I installed it through MS SQL Server 2014 Standard Single x64 installation?
And much more important: Why is only 2 GB RAM used if 32 GB are there and 28 GB should be used?
kind regards
PeterHello,
Could you try to enable Lock Pages in Memory option for the SQL Server service account?
http://www.sqlcoffee.com/Tuning05.htm
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
How i can Expand RAM of Hp Pavalion g6 1020se note book PC
I want to expand RAM of my Hp Pavalion g6 1020se note book PC. still it has 4gb of RAM. i found two RAM slot there ..is it support 8gb RAM ?..
Hi,
No, it supports 2x2Gb = 4Gb as shown:
Hardware
Product Name g6-1020se
Product Number
LD051EA
Microprocessor
2.53 GHz Intel Core i3-380M
Microprocessor Cache
3 MB L3 cache
Memory
3 GB DDR3
Memory Max
Upgradeable to 4 GB DDR3
Video Graphics
Intel HD (up to 1.24 GB)
Display
39,6 cm (15,6") High-Definition LED HP BrightView Display (1366 x 768)
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Whats the best Multiprocessing setup for 24 Processor Cores & 64gb of RAM using new MacPro OSX 10.9.5.
I'm still getting an After Effects Warning: at the end of some renders saying "A frame failed to render using Render Multiple Frames Simultaneously.Hi Szalam,
I'm using the latest After Effects (13.2.0.49)
See attached some screen grabs of my setup. -
RAID 0+1 using ExpressCard/34 with double eSata
I have a problem, and maybe someone here can help me a bit. Many thanks in advance.
I am doing a lot of RAW photo editing and also sometimes video processing. I want my pictures and video to be stored on an external hard drive connected to my MAC BOOK PRO using ExpressCard/34 and at the same time I want to have continuous backup of my files. I am thinking of playing a bit with RAID 0+1. Here is my plan:
I am planning to buy two WD My Book® Studio Edition™ II 1TB external drives (http://www.wdc.com/en/products/products.asp?driveid=409). The drive itself operates as RAID 0 (striped) build from two drives 500 GB each - I understand that this way it is faster than one 1TB drive. I think of connecting these two drives to my Mac Book Pro using eSata Interface using eSATA II 2-Port ExpressCard-M form SIIG (http://siig.com/ViewProduct.aspx?pn=SC-SAEE12-S1 - seems to be recommended by WD). Then, by using Disk Utility, I plan to create a RAID 1 (mirrored) set consisting of these two external drives.
What I am expecting is to have something like RAID 0+1 and I expect this to be a better (faster) solution than buying one big WD My Book® Studio Edition™ II 2TB (2x1T internally) and using it in the RAID 1 configuration (which can be set by using the software provided by WD with the drive).
If anyone have some experience with RAID (main is close to 0) then I would be very thankful to read your comments.
I expect the configuration with 2 external drives connected via eSata to be faster than one 2TB (2x1TB) drive working in RAID 1 configuration. I am also wondering if my "RAID 0+1" will be much slower than one WD 1TB external drive (which is 2 drives working as RAID 0) or this is still comparable.
Thank you for your help. Much appreciated !
MarcinHi Danny,
Yes, I did read it, but it did not address my particular situation - i.e. all four drives connected to the promise controller. The bits that do seemed to be saying "look at the manual", which isn't helping me. Last night, I updated the mainboard bios to 2.4, which didn't make any difference, so I'm still stuck.
Thanks for taking the time to reply
Tony
Maybe you are looking for
-
Permanent pop up, can't do anything in Safari
Hey guys, I've had a quick look over the board to see if I could find an answer, but had no luck. Here's my problem. I was using Safari this morning and every so often I get a pop up, but it's no big deal. Though after a while, a window popped up wit
-
How Can i clean my memory and make my imac more faster ?
I am new user in mac i have imac 4 g ram and need a way to clean the memory and make my imac more faster ...
-
Pbm in setting a record as modifed record through coding in TMG
HI all, I have implemented Table Maintenance Generator for a Z table. And i want to perform some action whenever the current record is modified. The problem is that the user will not edit a particular field directly. Instead, on clicking a button (Cl
-
Need of SessionSet and RLM Port
Hi All, Kindly explain the importance of RLM Port and session set port in MGW AS5400 and how its related to PGW 2200 Thanks Sathya.
-
Excise modvat accounts not defined for GRPO transaction and T1 excise group
Hi All I am getting the error Excise modvat accounts not defined for GRPO transaction and T1 excise group i have maintained this still iam getting the same error. IMG -- Logistics - General -- Tax on Goods Movements - India - Account Determination --