Expanded Raid Size Not Showing Up In Windows Explorer

Hello,
Using Server 2012R2. I had a 32TB RAID 6 array and added more disks. I used MegaRAID Storage Manager to 'expand' the logical disk to70TB. The expansion/initializing is complete, according to MegaRAID. However, when looking in windows explorer, the volume
is still 32TB.
In the 'Server Manager -> File and Storage Services -> Volumes' it says the volume is still 32TB with some free space.
In the 'Server Manager ->File and Storage Services -> Volumes - > Disks' it says volume capacity is 70TB and 38 is 'Unallocated'
Is the volume really still 32TB after waiting 8 days for MegaRAID to expand the array or is windows explorer just not refreshing the information? Or, is there something else I must do?
Any help is appreciated.

When I try to do this, I get the error...
"the volume cannot be extended because the number of clusters will exceed the maximum number of clusters supported by the file system"
I searched around for that error and found that 4k size clusters won't allow volumes over 16TB.
http://social.technet.microsoft.com/Forums/en-US/6780cae6-90f2-4f16-b4d2-c975e1d2eb63/error-the-volume-cannot-be-extended-16tb-volume?forum=dataprotectionmanager
I entered those commands and here were the results for that volume.
C:\>fsutil fsinfo ntfsinfo M:
NTFS Volume Serial Number :       0x3262d94b62d91487
NTFS Version   :                  3.1
LFS Version    :                  2.0
Number Sectors :                  0x000000105efbefff
Total Clusters :                  0x0000000082f7df7f
Free Clusters  :                  0x0000000011996df1
Total Reserved :                  0x0000000000000600
Bytes Per Sector  :               512
Bytes Per Physical Sector :       512
Bytes Per Cluster :               16384
Bytes Per FileRecord Segment    : 1024
Clusters Per FileRecord Segment : 0
Mft Valid Data Length :           0x0000000015840000
Mft Start Lcn  :                  0x0000000000030000
Mft2 Start Lcn :                  0x0000000000000001
Mft Zone Start :                  0x00000000139d6460
Mft Zone End   :                  0x00000000139d9660
Resource Manager Identifier :     ACC105BE-A72B-11E3-80B5-00219B9AABFF
EDIT: Also note that in MegaRAID the volume is displayed as having 64KB clusters.

Similar Messages

  • Mapped Drive B:\ to a network share but does not show up in Windows Explorer.

    I mapped drive B: to a network share but it does not show up in Windows explorer.  I can go to the drive by typing b:\ but is not visible in explorer.  But if I login as local admin it shows up in windows explorer.  Any suggestions?

    Hi Lloyd Reeves,
    Based on my research, I would like to suggest the following:
    Disconnect the mapped drive and map it again.
    Ensure the user is using an administrator account; or change another user account to have a try.
    Create  a shortcut for a share folder and see if it will disappear.
    In addition,  it would be helpful for future troubleshooting if you could help to collect the following information:
    Which method did you use to map drive?
    Was there any error message in the Event log? If so, please provide the      detailed information.
    For your information, please refer to this similar case:
    http://social.technet.microsoft.com/Forums/windows/en-US/6acab187-c46c-4ff9-8604-196c64ea8995/mapped-drives-not-visible-in-explorer-although-shown-in-map-network-drive?forum=w7itpronetworking
    Regards,
    Lany Zhang

  • IPod not showing up in Windows explorer / iTunes - not responding to reset

    I have updated my new (1 day old!!) iPod nano to the newest firmware (1.1.1.)... and now I can't use the iPod anymore.
    It doesn't show up in Windows Explorer. When I try to connect to it via Run, it says: 'E:\ is not accessible. The file or directory is corrupted and unreadable'
    When trying to open Windows Explorer, it freezes - not showing any harddrives.
    When trying to connect to it via CMD (dos)... It reads: 'The file or directory is corrupted and unreadable'
    I have tried all the soft resets, hard resets etcetera. I have uninstalled the USB driver for iPod, uninstalled iTunes, reinstalled them both, used different USB ports. But still no success.
    I can't connect to it via iPod Updater, because Windows won't connect to it.
    The iPod itself does respond, although I can't find any data on it anymore.
    How do I get my iPod to work again: connect to my windows / iTunes player? Please, any help is appreciated!
    iPod nano 4GB   Windows XP  

    I have tried all the 'Rs' that Apple recommend. As said, I can't hook up the iPod to my computer. I have tried to reset the iPod manually (holding the select and menu button) - but this doesn't work.
    If there is another (manual) way to restore the iPod, I would love to hear about it.
    As said: as for restoring the iPod - I can't get any contact with my iPod with my computer at all.

  • Lightroom watermarks not showing up in Windows explorer.

    Quick question for everybody. I imagine there's an easy solution for it, I just haven't been able to figure it out.
    The company I work for needs to manage and watermark many different types of photos (perfect for Lightroom.)  The only problem is, when Im uploading photos to our website, the Lightroom watermarks dont show up in the thumbnail preview of Windows Explorer. When I right click the image thumbnail and select "preview" the full size image preview pops up with the watermark. I guess my question is, is there any way to get the Lightroom watermarks to show up when viewing files in Explorer in large thumbnail view? It would save my a lot of time and frustration.
    Thanks ahead of time!

    Im including this image in case I did a terrible job of explaining my problem.

  • SD/SDHC/SDXC/MMC/MS/MS Pro card-reader slot not showing up in windows explorer.

    I have a Lenovo IdeaCentre, purchased only four weeks ago.  It product family is IdeaCentre k410, machine type 10089.  Anyhow, the problem is: I inserted a microSD / microSDHC, both of which seem to fit into the slot fine, though neither registers under anywhere in windows explorer, neither in the root of C://, nor in any of the subdirectories, or on the main listing of mounted file systems.  I used the Lenovo Driver Updater and re-installed the SD Card Reader driver, to no avail.  Any help would greatly be appreciated.  As well, the computer runs Windows 8, which has some features I'm unhappy with, and although this is not a windows forum and I don't mean to create a thread that deviates from lenovo-specific topics, I was wondering if there is anything in either the machine architecture or the software of Windows 8 that could hinder m in installing a dual-boot system so that I might have the option of running a variant of linux as a sub-operating system, as I did with windows XP.?????  OK any help at all would be so greatly appreciated, thank in advance.  I really want to be able to retrieve some writing files I have stored in that micro SDHC card.  As another aside, does anyone know the max limit of RAM this computer can take and if it is DDR or some other type?

    hi BrokenHalo,
    Welcome to the Lenovo Forums.
    Regarding your questions:
    1. When you inserted the SD card, do you hear a sound that a device is inserted and under Device Manger, do you see a Card Reader?
    If not, try to:
    a. boot intto the BIOS by pressing F1, load defaults by pressing F9 then press F10 to save and exit BIOS.
    b. Reseat the front panel connectors (see page 23 of the hardware maintenance manual)
    2. To install linux (i.e. Ubuntu), see if you can install Ubuntu via UEFI. If you're unable to do so or if you want to install other OS, try to:
    a. Boot into the BIOS by pressing F2 and set the following settings below 
    UEFI Boot Mode = Legacy
    Secure Boot = Disabled  (if applicable)
    CSM = Disabled /  Legacy or Other OS (if applicable)
    OS Optimized Default = Disabled or Legacy (if applicable)
    b. When finished, press F10 to save and exit BIOS then try to install Ubuntu via Wubi or insert your Windows installation disc to install a different OS.
    3. As per this pdf data sheet, the Lenovo K410 has a max RAM of 8GB PC3-12800 1600MHz DDR3  but Crucial reports that this unit can take up to 16GB PC3-12800 1600MHz DDR3 - check this site.
    Hope this helps
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • IPhone not showing up in Windows Explorer

    Hi,
    My Environment is:
    iTunes v9.0.2.25
    iPhone 3G; OS v3.1.2
    Windows Vista
    When I connect my iPhone to my PC, I do not see the device under Windows Explorer nor in Device Manager. However, iTunes does pick up the iPhone and I can sync ok.
    I have tried the following -
    I have gone to Device Manager and uninstalled "Apple Mobile Device USB Driver" from under "Universal Serial Bus Driver". I then disconnected the iPhone and reconnected, which then caused Windows to re-install the driver. However, it still does not appear under "Portal Devices" or "Imaging Devices" in Device Manager and it still does not appear under Windows Explorer.
    I have also tried uninstalling iTunes and reinstalling, still no luck.
    Any other suggestions?
    Thanks

    I have had exactly the same problem with both my desktop with Windows 7 and my laptop with Business Vista since the latest iTunes upgrade two weeks or so ago. I think it must be an Apple error and I am not very willing to fiddle with my machine to correct it. I think Apple should tell what is going on and give us a fix. My iTunes is 9.1.0.79 and iPhone is 3.1.3
    An all my photos are stick in the phone, which is a nuisance as I use it for work and I am having to email them all to myself.

  • Ipad not connecting to Windows 7 (not showing up in windows explorer or Itunes)on to windows 7 device manager driver

    After having someone fix problems with my windows, I now cannot connect my ipad to my computer or itunes.  I get a yellow triangle with exclamation point in the device manager.  I have tried to uninstall and install, and disable and unable.  I also tried reinstalling itunes.  However, nothing has worked.  It might be a problem with the correct driver not being on the computer.  It finds Apple Mobile Device USB Driver but cannot install because "one of the installers for this device cannot perform the installation at this time."  Any ideas?

    Hey ct1110,
    Thanks for the question, and great troubleshooting so far. The following resource provides some great steps, some of which you may have already tried. Specifically, I recommend running through the steps in “5. Verify that the Apple Mobile Device USB Driver is installed”:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

  • IPhone 3GS not showing up in Windows Explorer

    As of this morning, when I plug my 3GS into the computer, it syncs with iTunes but it isn't showing up in My Computer - I'm trying to get some photos off my phone, but it isn't appearing on the computer. What's going on/how can I fix it?

    wjosten wrote:
    One common cause of this are photos in your camera roll that were NOT taken with your phone's camera, i.e.-photos saved to your camera roll from emails, safari or from MMS's. If you have such photos in your camera roll, delete them. If you want to save them, email them to yourself, then delete them. See if your computer will see your phone after doing so & allow you to import your camera roll photos.
    your suggestion would be a hassle and i doubt it will work.
    i had the same problem.
    i tried all sorts of remedies after researching in google..
    for example, uninstalling and reinstalling my drivers. all to no avail.
    this, saved my life.
    http://iphonefolders.com/
    it's free, not a trial.

  • IPod Touch will not show up in Windows XP after iTunes 10.2.1 update

    After updating iTunes to 10.2.1 my 4G Touch will not show up in Windows XP to charge or to sync. I have been reading this forum and following the multiple Apple help and troubleshooting steps with no luck. I can get Windows to recognize and charge the Touch as a camera but it will not update the driver for Apple Mobile Device. I have come to the conclusion it is an Apple software problem. Does anyone know where I can get the previous Apple Mobile Device driver for Windows XP? I would like to give that a try. It's really disappointing....

    Upon uninstalling and re-installing all of the Apple software nothing has changed. I can see Apple Mobile Device Support in add/remove programs but when clicking on "repair" it cannot finish and says it encountered a fatal error and no changes have been made.
    The error I get trying to install the driver in Device Manager says "I/O operation has been aborted because of either a thread exit or an application request".
    Does anyone have any suggestions?

  • Ipod Touch not showing up it windows 7 or itunes

    My Ipod Touch is not showing up in windows or itunes or even the ipod touch if you cloud help thank you so much
    Thank you so mcuh

    Have you double checked to make sure the Apple Mobile Device service is installed and running?
    http://support.apple.com/kb/ts1567
    Also see this article for more troubleshooting assistance.
    http://support.apple.com/kb/TS1538
    B-rock

  • I tried to open a folder in my Documents. It does not show in any window but does show up when I am half way between windows. It did the same thing when I tried to empty the trash. It asked if that was what I wanted but I could't say yes because it was or

    I tried to open a folder in my Documents. It does not show in any window but does show up when I am half way between windows. It did the same thing when I tried to empty the trash. It asked if that was what I wanted but I could't say yes because it was or

    what is your question/issue here? did the folder have any content in it to begin with? screen shots of what you may be seeing?
    if english isn't your native language, write it in what you are most comfortable speaking in to describe your issue.

  • 7th gen iPod not showing up in Windows 8 anymore

    7th gen iPod not showing up in Windows 8 anymore. Tried all the apple troubleshooting. Help?

    I have tried all the 'Rs' that Apple recommend. As said, I can't hook up the iPod to my computer. I have tried to reset the iPod manually (holding the select and menu button) - but this doesn't work.
    If there is another (manual) way to restore the iPod, I would love to hear about it.
    As said: as for restoring the iPod - I can't get any contact with my iPod with my computer at all.

  • Essbase server is not showing in the windows services (11.1.2.1)

    Hi All,
    Essbase server is not showing in the windows services 11.1.2.1. when I checked the processes from task manager it is there.
    Regards,

    The windows service for essbase in 11.1.2.x is an OPMN service "Oracle Process Manager..."
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Bios not install error and Raid Configuration not showing physcial HDD in Lenovo

    Is this a SATA hard drive by any chance?  Sounds like you have an Adaptec SCSI controller, but no hard drive attached to it.  Are you booting an install DVD of some sort?

    Bios not install error and Raid Configuration not showing physcial HDD in Lenovo RD 120 Server (New)
    updated bios still same error
    and at array configuration it is not showing any hard disk
    hard disk utility it is showing hard disk 
    we are trying to install OS with single hard disk in Lenovo RD 120 Server
    This topic first appeared in the Spiceworks Community

  • I have an old Ipod that won't show up on Windows Explorer but shows in Itunes., I have an old Ipod that won't show up on Windows Explorer but shows in Itunes.

    I have an old Ipod that won't show up on Windows Explorer but shows in Itunes., I have an old Ipod that won't show up on Windows Explorer but shows in Itunes.

    In iTunes, select the iPod in the iTunes sidebar, under DEVICES.  Over to the right, go to the Summary tab.
    There should be a checkbox that says Enable disk use.  Check it and Apply the change.  It should now appear in Windows, when the iPod is connected.
    NOTE:  When Disk Use is enable, you have to eject the iPod (in iTunes) before physically disconnecting it from computer.

Maybe you are looking for