Expanding a report without any warning messages
Hi,
At some point of our VBA programming, we need to run the MNU_ETOOLS_REFRESH macro, and we need it to run without asking the user anything...
Is it possible?
Thanks.
Dear Leandro Cardoso Feliciano,
You Could not change it. BPC always shows it default. Just Information, your case I had sent it before and I did not get a right answer.
Kind Regards,
Wandi
Similar Messages
-
PSE 9 reboots my machine without any warning message..
I am using Photoshop elements 9. i brought it recently. And the installation went
well.. but when i am using the software, my machine reboots without any warning message.
My System Configuration: INtel Pentium 2.19GH, 80GB Hard Disk and 2GB RAM. and operating system is XP.
Please help me in this regard.. what needs to be done...???Hi,
Since nobody else is coming up with ideas for your problem, I'll let you know my thoughts.
As the system is suddenly rebooting, I tend to feel you might have a hardware problem. PSE 9 does use a lot of resource when it is working and could be causing the hardware to fail.
Just a few questions first:
1) how much free space on your disk drive?
2) does the system reboot when using any other software?
I have seen similar failures caused by overheating - sometimes a fan fails and needs replacing. Other causes could be a problem with the power supply unit - the extra processing load can sometimes cause the voltages to drop.
Since you said about the screen becomes blurry sometimes, it could be that there is a problem with the graphics card.
I'm not being rude, but how well are you with computers? If I were to ask you to check the event viewer, would you know what to do or would I have to give detailed instructions?
Brian -
How to Print Crystal Report without any dialog message on the client side
Hi!
I've read too much questions like this, but i can't find any answer.
How can i print a report on the client side directly?
I have three buttons, "Generate Report", "Generate PDF", "Print".
I want when the "Print" button was clicked, automaticaly the report is printed using default printer, like PrintToPrinter function, but in the client side.
Thanks!If you search for previous posts about this, you will see many posts saying not possible. If this functionality was possible, you could essentially have a page that would send something to a clients printer just by visiting the page, how bad of security hole would that be?
-
Photoshop cs2 crashes and reboot windows xp without any error message when I try to open a file
Hi,
I downloaded the trial version (assessment for thirty days) of Adobe Photoshop cs2. Once installed the trial version, the program works correctly, except for a basic function: to open files and modify them. Any image files (jpeg-gif-png-tiff-bmp-psd) on press command FILE>OPEN, or Ctrl+O, to open it, sends the system in crash, and without any warning message, send to "restart" the operating system, in my case , windows xp.
I use also photoshop cs, and it works correctly and allows to open file image also; but not with cs2.
What's the problem?The error message I see in a Event Viewer after the program crashed is the following:
Event Type: Error
Event Source: Userenv
Event Category: None
Event ID: 1041
Date: 22/03/2009
Time: 09:05:52
User: NT AUTHORITY\SYSTEM
Computer: PENTA
Description:
Windows cannot query DllName registry entry for
{CF7639F3-ABA2-41DB-97F2-81E2C5DBFC5D} and it will not be loaded. This is most likely caused by a faulty registration.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp. -
Laptop shuts down without any warning
My laptop is shutting down without any warning. It has done so twice. When I run the preboot diagnostic, everything is fine. When I run Dell Support Assist app, this is the error message that I got from the System History:
Application Error
Fault bucket 86066676302, type 4
Event Name: APPCRASH
Response: Not available
Cab ld: 0
Problem signature:
Pl: DllHost.exe
P2: 6.3.9600.17415
P3: 54504134
P4: StackHash_216b
P5: 6.3.9600.17736
P6: 55014336
P7: c0000374
P8: PCH_CF FROM_ntdll+0x000000000009177A
P9:
P10:
Attached files:
C:\Users\Raymond\AppData\Local\Temp\WER6C2E.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\Raymond\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_OUHost.exe_fcb15f1d8bcda961763f8dc9a8f899f8621977b_30a79b3d_14cf863e
Analysis symbol:
Rechecking for solution: 0
Report 10: toala596-eca4-11e4-bfac-08edb9244ef6
Report Status: 0
Hashed bucket: 7b43e3b419dd3feaa74b55be5e190271
These files may be available here:
C: \Users\Raymond\AppOata \Local\Microsoft\ Windows\ WER\ReportArchive
\AppCrash_OUHost.exe_fcb15f1d8bcda961763f8dc9a8f899f8621977b_30a79b3d_l4cf863eHi ,
Thank you for writing to the Dell Community Forum.I am Jennifer and I work for the Dell Social Media Team .
To assist me to resolve this issue I would suggest you to try these steps and advise the result ,
*)Is this issue seen with all applications and any particular applications.
*)When the system crashed did you experience any over heating issue.
*)May I know the operating system installed on the system .
*)Would suggest you to work on this system in safe mode with networking then test if the same issue is seen .
*)Also as you mentioned that with the preboot diagnostic the system passed all the test so the system's hardware is working fine.
If there are any more queries do reply to this post with the system model ,operating system installed on the machine, service tag of the system(sent via private message) so that I can look into the details of the system and assist you better .
Awaiting a reply from you .
Kindest Regards, -
SQL developer starts and then disappears without any warning
Hi, guys:
I need to use SQL developer where there are existing connections. however, SQL developer 3.1 asked the java.exe location, and I chose java 6, now I can launch SQL developer but not able to continue running it. SQL developer starts and then disappears without any warning. Could anyone help me on this problem?
Thanks a lot!
SamCan you start the exe from the BIN subdirectory? That should open a command console, and maybe you can see any error messages there that explain what's happening. For step-by-step directions, here's some help:
http://www.thatjeffsmith.com/archive/2012/06/how-to-collect-debug-info-for-oracle-sql-developer/
OR
Install SQL Developer to a new directory and run it from there and see if that helps you get around your current install's issue. -
How to create a report without any data
HI All, <BR> Can anyone help me in writing a report without any data. I want to create a report with list of memebers from a dimension where UDA is "My UDA". I wrote a report "<UDA(CHANNEL,'My UDA')" but this fetches me data too in the report. How to eliminate the data in the report. <BR><BR>Thanks<BR>Murali
Hi<BR><BR>Assuming you are using the essbase report writer the following script will work: <BR><BR>{ SUPPAGEHEADING }<BR>{ SUPCOLHEADING }<BR>{ SUPFORMATS }<BR>{ SUPFEED }<BR>{ NOINDENTGEN }<BR>{ FIXCOLUMNS 1 }<BR> <ROW("Dimension") <BR> <UDA(Dimension,MyUDA)<BR>!<BR><BR>the fixcolumns 1 will ensure that you only get the UDA without it you will get the variable followed by the corrosponding value.<BR>
-
PO Approval stuck in error without any Error message
Hi All,
we have few notifications for PO Approval where they are stuck in error without any error message. they are also not showing in the worklist of the approver nor in the wf_notifications table. please help on this on how to solve this. we have done various options to solve the issue like skip/rewind/suspend/retry. but none of them works..... below is an extract of such an notification -
Error in Workflow POAPPRV/3112-127925
From SYSADMIN
To Das, SD
Sent 12-Dec-2011 16:55:01
Closed 12-Dec-2011 17:07:30
ID 164593
Responder Das, SD
An Error occurred in the following Workflow.
Item Type = POAPPRV
Item Key = 3112-127925
User Key =429766-245
Error Name =
Error Message =
Error Stack =
Activity Id = 10770
Activity Label = ROOT:POAPPRV_TOP
Result Code = #STUCK
Notification Id =
Assigned User =
Thanks,
Sam D
Edited by: Sam D on 12 Dec, 2011 1:45 PMPlease post the details of the application release, database version and OS.
Can you find any errors in the Workflow log file?
All Purchase Orders or Requisitions Getting Stuck in Pre-Approved or In Process Status - Troubleshooting Checklist [ID 1104843.1]
Troubleshooting for Requisitions / Purchase Orders in Process or Pre-Approved Status [ID 225017.1]
Also, search MOS for (POAPPRV stuck) and go through the docs.
Thanks,
Hussein -
I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.
I am running Mac OSX 10.4.11. According to the System profiler the CD/DVD drive is a "PioneerDVD-RWDVR-112D." When I compare the information under this heading, the only unusual difference from my iMac is that the G5 reads "Burn Support: Yes (Unsupported)." My iMac reads "Burn Support: Yes (Apple Shipping Drive)."
Under the System Preferences the options are set to "Ask what to do" when a blank CD or DVD is inserted. Music CD set to open iTunes, Picture CD set to open iPhoto, Video DVD set to open DVD player.
Do you have any suggestions?
Thanks, JackHi Jack, great help so far!
Internal...
http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g5.html
External be sure it's Firewire & not Bus powered...
http://eshop.macsales.com/shop/firewire/optical-drives/ -
Hello I Download Adobe Photoshop CC 2014 Last Night
i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message
I Need Help Can You Resolve This ProblemLotfi are you receiving any error messages during the installation? I would recommend reviewing your installation logs for errors. Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files. You are welcome to post any specific errors you discover to this discussion.
-
Nokia Store Quits without any error messages.What ...
My inbuilt Nokia store application within my Nokia Asha 305 keeps quiting without any error messages.What do i do to resolve this.I recently updated the S40 OS could that be the reason. And why?
Just reset it to factory. That worked for me
-
Turn off suddenly without any warning when plugin Adapter(Charger)
My Pavillion dv6-3208tx turn off suddenly without any warning when plugin Adapter(Charger) and it won't start unless i unpluged the adapter. I can run on battery. Pliz help...!
Make sure the keyboard is seated properly.
(Instructions can be downloaded here.)
Sometimes, plugging in the adapter when the keyboard is improperly seated can cause this behavior. -
Concurrent Program ends in Error without any error message - Apps 11.0.3
Hi,
We have a concurrent program which errors out sometimes without any error message in log file or anywhere else. This happens intermittently. Is there anyway to see why this happens ( to see error message somewhere else - like FND tables ?). Any feedback is appreciated. This happens in Oracle Apps 11.0.3.
thanks
RamRam,
Is this a custom or standard concurrent program?
Was this working properly before? If yes, what changes have been done recently?
Did you try to relink the concurrent program executable file and see if this helps? Also, you could enable trace/debug and submit the request again and see if more details are collected in the logs -- See (Note: 296559.1 - FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12).
Regards,
Hussein -
My Iphone 4 is very good until last Thursday, I used it from sep 2011 without any problems, My problem is the battery is down without any warning and working after 100% then 82% then 50% then 30% and down these things throw less than two hours
what can I do with that??
Also, I live in Cairo,Egypt
waiting your recommendationsHi,
"But it didn't work it's just turning them to black gray scale colors not what i was thinking about."
If you want it to be colored, you'll need to create a color-palette for the 8bppIndexed bitmaps. The keyword for this process is "Color-Quantization".
The whole yellow-green pie you get is from the wrong format. If you convert the 32bpp bitmaps to 24 bpp bitmaps, you loose the alpha channel ("transparency"). You can manually set one color to "transparent" with the mMakeTransparent-method
of the Bitmap class, or simply use gif-images (they are 8bpp with a transparent "key"-color)
Regards,
Thorsten -
Weird error without any error message
I've been working on some actionscript 3 system. And all of a
sudden, it wouldn't execute anymore. When I pushed CTRL-Enter in
Flash CS3, a white screen would open up (instead of the normal
flash program) and no trace-output would be given.
Three hours later I found the cause of this weird problem.
It's (simplified) the line:
var value:Number = -(true ? 1 : 0); // This one doesn't work.
Put this line in your script, and your entire program won't
execute. And without any error message! I was wondering, why is
that? By the way, the following lines do work:
var a:Number = -(2*3+4); // Gives -10.
var b:Number = (true ? 1 : 0); // Gives 1.
var c:Number = -b; // Gives -1.
var d:Number = 0-(true ? 1 : 0); // Gives -1.
var e:Number = -((true ? 1 : -1) as Number);
So, my guess is that the code (true ? 1 : 0) gives some sort
of data type which is not a Number, and therefore doesn't except
minus signs. But that wouldn't explain why it doesn't even give an
error. So what IS wrong with it?ok - well if these numbers are used to begin the execution of
a method in your file, it's likely that they are not firing up
because the syntax here is incorrect. in order to use this type of
conditional operator (which i do use quite often as well, handy
convenient ;) the structure should be:
var value:Number = (condition) ? 1 : 0;
'true' is not a 'condition' but a boolean result, so it
should not be evaluated in the way have been using it here -
however 'true' is 'true' so the result will always be 1 (the first
expression in the operator) - i'm not certain why you would need a
-0 result and if you are always wanting a 'negative' number then
use that number in the return expression, as in:
var value:Number = (condition) ? -1 : 0;
Maybe you are looking for
-
Can't open Project Server 2013 word documents with office 2010 installed
hello forum members, we having issues opening a word document in a Project Server 2013 . we have Office 2010 on our computers installed. when I click on a document link, i get a message "The webpage cannot be displayed". the only way to open a docu
-
Replication house tells me my burned pcm and ac3 is mpeg
Sorry for the double post, just saw this audio section. I'm having a difficulty with my burned dvds apparently coming out mpeg audio. I exported from pp 1.0 a final mpeg video with PCM audio for my final dvd project. I used Encore CS3 to burn the dis
-
Using "case" to poplulate multiple dropdowns
I'm using a case script to populate a dropdown switch (this.formattedValue) // use the current bound value of the dropdown case "NW1 - Arlington WA": OSRlumber.addItem("Gary"); OSRlumber.addItem("Miker"); OSRlumber.addItem("James"); OSRlumber.addIte
-
Content filters based on Group Best Practice
What is best practice for Content filters based on Group. What we wanna accomplish. We have few groups but i'll make an example on two. We have one group that have allowed "Media" and another group that have allowed "Exe". What is best practice if on
-
Authorized Status problem in change Request
Hi All, when a correction is completed/withdrawn, generally the change request status changes to Implemented/new and we used to confirm the realization. The Problem is due to some missing configuration(in status attribuites), this was not done before