Expanding and controller questions
My company finally filled (physically, with drives) our XRAID. There are now 14 750gb drives in it.
At this current point it sits like this:
XXXXXXX YYY ZZZZ
X = blank drives on upper controller
Y = raid 5 with spare on lower controller
Z = raid 5 with spare on lower controller
My ideal situation would be:
YYY YYY Spare = RAID 5+1 and spare on upper
ZZZ ZZZ Spare = RAID 5+1 and spare on lower
I know how to expand arrays using RAID Admin, but I'm not sure how to MOVE and array from one controller to the next. I would need to move one array to the upper controller and then expand it, and then expand the array on the lower.
Is it: create the array on the controller then copy the data over?
Or: create the array and physically swap the drives?
Or maybe its neither and I have this all wrong. Any advice would be appreciated, thanks.
Thanks for the help
Matt
Thanks everyone for your help.
So I guess the plan is to build an array on on the upper, copy the data to it, then break and rebuild the other. Not as easy as I hoped but doable.
Similar Messages
-
Account with an icon of a face and a question mark
Same issue of other user in Yosemite Apple Support.
Following advises on that thread I also installed the ETRECHECK software tool, report is as follows:
Problem description:
At the login screen I find an icon with a face and a question mark in it - with a message it needs an update.
EtreCheck version: 2.1.5 (108)
Report generated 02 gennaio 2015 12:37:26 CET
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 1:22:54
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500,11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.89 GB (467.03 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
User Login Items: ℹ️
iTunesHelper Applicazione (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox ApplicazioneHidden (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
Pin It Button [Installed]
Save to Pocket [Installed]
Add To Amazon Wish List [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
14% WindowServer
3% hidd
2% Safari
1% Dock
0% fontd
Top Processes by Memory: ℹ️
333 MB com.apple.WebKit.WebContent
155 MB mds_stores
137 MB Safari
137 MB Finder
86 MB Dropbox
Virtual Memory Information: ℹ️
7.76 GB Free RAM
4.88 GB Active RAM
3.28 GB Inactive RAM
1.26 GB Wired RAM
4.73 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 2, 2015, 11:15:06 AM Self test - passed
Jan 2, 2015, 12:06:57 AM /Library/Logs/DiagnosticReports/Dropbox109_2015-01-02-000657_[redacted].cpu_res ource.diag [Details]
---------- is there any troubleshooting for delete that fake account every time I start my Macbook Pro?
thanks and regards
EdoardoSmiley face with a ? means a bootable system is not found.
There maybe a problem with either system software or hard drive itself.
Try this.
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
Best. -
The bottom rubber case of my macbook 13" late 2009 has expanded and has detached from the main body..As i'm not presently under warranty i wanted to know will the repair be free of charge for me. I had once got it replaced for free but in warranty. As i read some where in the support that apple had agreed with the defect and had decided to replace the bottom covers without any charge. And even if i'm charged for it what will be the amount will hav to pay for it..
ThankxHi,
Here's the Bottom Case Replacement Link
http://www.apple.com/support/macbook-bottomcase/
It doesn't answer your specific questions about cost... but it does advise to contact an Apple Store or an AASP...
Anyway have a look at it... if you haven't already..
Cheers and Good Luck... -
My iPad Mini #1 with OS 7.1.2 began uncontrolled actions recently. While reading a book in 3M Cloud App the pages would expand and then minimize on their own and then the uncontrolled action would open other apps and do the same by uncontrollably expanding and minimizing different pages in that app and then the actions would move on to another App and open it and expand and minimize pages and open different pages etc . . . Initially I thought the problem was connected to the 3M Cloud Library App so I deleted it on my Mini iPad and also in iTunes on my iMac and downloaded a fresh app to install on my Mini. However, that did not affect the problem. The uncontrolled actions start in any app and begin every time I open my Mini to the point it is becoming useless. Please help as I don't have a clue as to the cause of the problem or how to go about fixing it.
If this is still happening have you contacted APPLE support with the problem (same question to other posters).
If it is always after a certain length of time with active use - it may be overheating causing wear and tear on internal components.
Or - a bug in the software is causing sudden replay of what you just did.
Had similar issue with work owned IBM think Pad due to age and use in office area that was warm (not my choice) - it behaved as though the track mouse or keyboard was stuck - repeating same single character - open/close folders- would have to do quick shut down by pulling the pad out of dock and pulling the battery out -- solution - was to get new lap top after PC techs cleaned it and it still happened. -
Tree component bug (?) and some questions
Hi! I have some problems and questions about tree component.
Problems:
1. I have an expanded tree with ~300 items. Each item label
displayed in 2-3 strings. After QUICK tree scrolling using mouse
wheel (I make 3-5 scrolls) for most of items displayed only last
string and one empty string :(
Bug of tree renderer? Is it fixable?
Questions:
1. Can I have font color X for tree item 1 and font color Y
for tree item 2?
2. I have a tree with ~300 items. Expand/Collapse tree
operations takes 5 to 10 seconds on Core2Duo. Is it possible to
speed up this operations?
Code:Hello.
About problem 1.
I faced this problem several times, cann't understand the
problem. May be it's a bug.
Questions.
1. Of course you can. Write itemRenderer for this.
2. Tree has effects for expanding and collapse events, you
can reduce times for them. -
Fundamentals: Custom Nodes vs Methods and Controller in MVC
I have a couple quick questions that I'd consider somewhat fundamental that I should have a better grasp this far along in development...
- First of all, what do you guys/gals consider the best way to structure your JavaFX classes. I almost always create custom nodes (XCustomNodes usually... from JFXtras) representing certain "panels" filled with content (buttons, labels, text, etc). I realize you could also create a separate class/method to simply return HBoxes, VBoxes, Groups, etc. So... thoughts?
- Second, I see all these articles/posts saying ghat JavaFX is a perfect MVC language. I agree for the most part, but what would you consider the Controller? Aren't the View and Controller pretty well married together in JFX? Separating the Controller into its own entity seems like it'd be more work than help.
Just trying to extend my knowledge reach... Thanks in advance!evnafets
Thank you!!!
While I do not understand how to do this:(though I understand principle of it... the misunderstanding is the whole problem)
To make this example work all in one file, you have to make RemindTask2 an
inner class of Reminder (which is already an inner class)
I do not always understand packages....and doing what you suggested, in forming the packages, and sorting the classes, will help me understand the structure better...plus get me in the norm of always creating packages !
So what I'm going to do right now is go tear my code down into various packages
and source files.....however...if you or anyone else could explain/show example
of how to do what you said(for inner classes, not packages...understand packages) , it would be appreciated.
This fundamental inner class creation is obviously a major bump right now...and creating the packages and linking the classes will be easy, because I understand how to do it when I already have functional classes created.
I do not always understand class/method creation/implementation..such as here.
(IE: can create network apps/gui apps of simple nature....but this easy ol' thing has been driving me nuts.)
Creating those classes however,,,,even if not the most efficient way is something
needed for my basic Java knowledge.
Thank you,,,,VERY GOOD project/training is going to come from this !!
Really, thank you in any case...if you do not have the time(100% understand) please lmk, will just give you your duke award.
AEWSOME -
Musings: MVC Front Controller/Command and Controller Strategy
Hi,
I am currently taking my first shot at implementing the Front Controller pattern, the Command and Controller Strategy flavor, in Java. When applying the pattern, my chosen point of focus is achieving as much isolation as possible of Client-specific implementation details from the rest of the framework (Web-based framework Clients, Swing-based framework Clients, queueing-based framework Clients, etc.) However, I am running into a lot of (apparent?) inconsistencies when it comes to CCS discussions "out there", so I have a feeling that perhaps I have misunderstood the Front Controller/Command and Controller Strategy pattern. Maybe the MVC gurus out there would have some thoughts on the matter.
My issues:
1.) Some CCS discussions seem to assign View presentation (sometimes called "dispatch", or "rendering", or "forwarding"?) to an ApplicationController. It seems puzzling to me, since only a concrete FrontController should include any knowledge of a concrete View structure. Shouldn't only a FrontController perform a logical-to-physical resource mapping, thus encapsulating knowledge whether a particular View is a separate, stand-alone Web page or a compound, argument-driven Swing object, and how to "present it" (by either redirecting to a Web page, or bringing a particular Swing object into the foreground)?
2.) Some CCS discussions seem to introduce Client-specific implementation details at the ApplicationController level, for example "HTTP requests" or "HTTP responses". It seems puzzling to me, since I feel that every part of the framework, except for a concrete FrontController, should be completely independent of the nature of a Client making a request. Instead, I created a generic Request object w/arguments and have a concrete FrontController translate any client-specific details into such a generic Request, before delegating to an ApplicationController.
3.) In the light of the (2.) above, I am not sure what constitutes a "response" from an ApplicationController back to a FrontController. It seems to me that the only universal "response" is a LogicalViewEnumeration: what View to present once a command has been completed, in many cases a "don't care", or a "show the requestor", or a "show a home page" (not every request has to result in changing a View). Well, perhaps a LogicalViewEnumeration as well as possible View arguments (?).
4.) In the light of the (3.) above, I suspect that any failures in Request delegation, or Command execution, should be perhaps propagated back to a FrontController by exceptions only, since, say, a WebFrontController might want to show a click-through error page, when a SwingFrontController might prefer to show an error dialog box, a LogicalErrorViewEnumeration might not make sense at all in the context of a particular Client, for example a queueing Client.
5.) In the light of the (4.) above, there is the question of an appropriate Request interface (into an ApplicationController), an appropriate Response interface (back into a FrontController), as well as an appropriate ViewArguments interface (into a FrontController and later into a View). The problem with generic Requests is that they can be created with nonsensical argument combinations, so shouldn't Requests be abstract and force proper arguments in concrete subclasses, through explicit constructors (in a sense, degenerate Commands)? The problem with Responses and ViewArguments is that... well, I have not found any formal discussion anywhere as to what those should look like. In most samples I have encountered, Responses include Client-specific implementation details, as mentioned in (2.), above.
6.) Some CCS discussions seem to introduce a Flow Manager at the ApplicationController level. It seems puzzling to me, since the whole point of the Command and Controller Strategy flavor seems to be centralization of business logic execution within self-contained Command objects. Shouldn't Requests get associated with Handlers (objects capable of actually carrying out Requests) and transformed into Commands inside an ApplicationController, thus Commands themselves return appropriate LogicalViewEnumeration back to an ApplicationController, back to a FrontController? Let's consider a ShowMyShippingAddress request coming into the framework: unless such a Request is eventually treated as a Command returning a particular LogicalViewEnumeration, it is suddenly a Flow Manager "acting" as a business logic driver. I guess the question here is: except for a few special cases handled by a particular ApplicationController (authentication, error conditions, default behavior, etc.), should flow management be considered stand-alone, or always delegated to Commands?
7.) Some CCS discussions seem to include an extra Request argument that specifies an ApplicationController to use (Request.Action="create", Request.Controller="account", Request.Username="me-me-me"), instead of using a Router inside of a FrontController to resolve to a particular ApplicationController through a generic action (Request.Action="createAccount", Request.Username="me-me-me"). I am not sure about the reason for such a design decision: why should a Client or a FrontController be allowed to concern itself with an implementation-level structure of the framework? Wouldn't any framework state -dependent ApplicationController resolution issues be best handled inside a Router, used by a FrontController to resolve [obtain] an appropriate ApplicationController, thus preventing Clients from ever forcing the framework into a possibly inconsistent behavior?
Any comments appreciated...
Thanks,
Garygniemcew wrote:
1.) Some CCS discussions seem to assign View presentation (sometimes called "dispatch", or "rendering", or "forwarding"?) to an ApplicationController. It seems puzzling to me, since only a concrete FrontController should include any knowledge of a concrete View structure. Shouldn't only a FrontController perform a logical-to-physical resource mapping, thus encapsulating knowledge whether a particular View is a separate, stand-alone Web page or a compound, argument-driven Swing object, and how to "present it" (by either redirecting to a Web page, or bringing a particular Swing object into the foreground)?It is hard to tell without reading the actual discussion, but my guess is that the posters were either conflating or being loose with the distinction between a FrontController and an ApplicationController. The former is (normally) intimately tied to the actual view being used (HTTP, Swing, etc.) whereas the ApplicationController typically is not. Both are involved in dispatch and event processing. The former normally renders a view whereas the latter does not.
gniemcew wrote:
2.) Some CCS discussions seem to introduce Client-specific implementation details at the ApplicationController level, for example "HTTP requests" or "HTTP responses". It seems puzzling to me, since I feel that every part of the framework, except for a concrete FrontController, should be completely independent of the nature of a Client making a request. Instead, I created a generic Request object w/arguments and have a concrete FrontController translate any client-specific details into such a generic Request, before delegating to an ApplicationController.Generic is fine. However, you can become generic to the point where your Request and Response interfaces are only acting as "marker" interfaces (think of java.io.Serializable). Writing a truly generic controller is possible, but personally, I have never found the effort justified.
gniemcew wrote:
3.) In the light of the (2.) above, I am not sure what constitutes a "response" from an ApplicationController back to a FrontController. It seems to me that the only universal "response" is a LogicalViewEnumeration: what View to present once a command has been completed, in many cases a "don't care", or a "show the requestor", or a "show a home page" (not every request has to result in changing a View). Well, perhaps a LogicalViewEnumeration as well as possible View arguments (?).A given service (if you ascribe to SOA) should be the fundamental unit in your architectural design. A good application controller would be responsible for determining how to dispatch a given Command. Whether a Command pattern is used or whether service methods are invoked directly from your FrontController, the ApplicationController should enforce common service aspects. These include authentication, authorization, auditing, orchestration, validation, logging, error handling, just to name a few.
The ApplicationController should ideally offload these aspects from a given service. The service would indicate how the aspects are to be applied (e.g., strong authentication required, x role required, fetching of existing process state, etc.) This allows services to be developed more quickly and to have these critical aforementioned aspects developed and tested centrally.
Your FrontController, in contrast, is responsible for transforming whatever input it is designed to receive (HTTP form data posts, XML-RPC, etc.) and ensure that it honors the contract(s) that the ApplicationController establishes. There are no cut-and-dry decisions though about when a given piece of functionality should be ApplicationController or FrontController. Take error handling. Should I emit just a generic ServiceException or allow the FrontController to decide what to do with a more concrete checked exception? (The FrontController, in any case, should present the error to the user in a manner dictated by the protocol it serves).
gniemcew wrote:
4.) In the light of the (3.) above, I suspect that any failures in Request delegation, or Command execution, should be perhaps propagated back to a FrontController by exceptions only, since, say, a WebFrontController might want to show a click-through error page, when a SwingFrontController might prefer to show an error dialog box, a LogicalErrorViewEnumeration might not make sense at all in the context of a particular Client, for example a queueing Client.See above. Yes. However, the ApplicationController could easily 'hide' details about the failure. For example, any number of exceptions being mapped to a generic DataAccessException or even more abstractly to a ServiceFailureException. The ApplicationController could indicate whether the failure was recoverable and/or populate information necessary to speed up production support (e.g., mapping exceptions to error codes and/or providing a primary key in an error audit log table for support to reference). A given FrontController would present that information to the user in the method that makes sense (e.g., error dialog for Swing, error page for HTML, etc.)
gniemcew wrote:
5.) In the light of the (4.) above, there is the question of an appropriate Request interface (into an ApplicationController), an appropriate Response interface (back into a FrontController), as well as an appropriate ViewArguments interface (into a FrontController and later into a View). The problem with generic Requests is that they can be created with nonsensical argument combinations, so shouldn't Requests be abstract and force proper arguments in concrete subclasses, through explicit constructors (in a sense, degenerate Commands)? The problem with Responses and ViewArguments is that... well, I have not found any formal discussion anywhere as to what those should look like. In most samples I have encountered, Responses include Client-specific implementation details, as mentioned in (2.), above.See comment on marker interfaces above. Nothing, however, stops you from requiring a certain sub-type in a given service method. You can still pass in the interface and validate the proper type by an assert statement (after all, in the vast majority of situations, the proper service method should get the proper instance of a given Request object). IMO, the FrontController would create the Command instance which would be passed to the ApplicationController which would dispatch and invoke the proper service method. A model response would be received by the FrontController which would then render the appropriate view.
gniemcew wrote:
6.) Some CCS discussions seem to introduce a Flow Manager at the ApplicationController level. It seems puzzling to me, since the whole point of the Command and Controller Strategy flavor seems to be centralization of business logic execution within self-contained Command objects. Shouldn't Requests get associated with Handlers (objects capable of actually carrying out Requests) and transformed into Commands inside an ApplicationController, thus Commands themselves return appropriate LogicalViewEnumeration back to an ApplicationController, back to a FrontController? Let's consider a ShowMyShippingAddress request coming into the framework: unless such a Request is eventually treated as a Command returning a particular LogicalViewEnumeration, it is suddenly a Flow Manager "acting" as a business logic driver. I guess the question here is: except for a few special cases handled by a particular ApplicationController (authentication, error conditions, default behavior, etc.), should flow management be considered stand-alone, or always delegated to Commands?There are distinct kinds of flow management. For example, orchestration (or BPM) is properly at either the service or ApplicationController layers. However, determining which view to display is properly at the FrontController layer. The ApplicationController should receive a Command (with a populate Request) and return that Command (with a populated Response). Both the Request and Response are fundamentally model classes (within MVC). The FrontController is responsible for populating the Request and/or Command and rendering the Response and/or Command. Generic error handling is usually centralized for both controllers.
gniemcew wrote:
7.) Some CCS discussions seem to include an extra Request argument that specifies an ApplicationController to use (Request.Action="create", Request.Controller="account", Request.Username="me-me-me"), instead of using a Router inside of a FrontController to resolve to a particular ApplicationController through a generic action (Request.Action="createAccount", Request.Username="me-me-me"). I am not sure about the reason for such a design decision: why should a Client or a FrontController be allowed to concern itself with an implementation-level structure of the framework? Wouldn't any framework state -dependent ApplicationController resolution issues be best handled inside a Router, used by a FrontController to resolve [obtain] an appropriate ApplicationController, thus preventing Clients from ever forcing the framework into a possibly inconsistent behavior?I am not 100% sure of what you are getting at here. However, it seems to be the method by which commands are dispatched. They are in effect allowing a FrontController to dictate which of n ApplicationControllers should receive the request. If we allow a FrontController to directly invoke a service method, then the ApplicationController is simply a centralized framework that should always be invoked for each service method (enforced via AOP or some other mechanism). If there is a single, concrete ApplicationController which handles dispatch, then all FrontControllers communicate directly with that instance. It is really just a design decision (probably based on your comfort level with concepts like AOP that allow the ApplicationController to exist solely behind the scenes).
I might have totally missed your questions, but those are my thoughts on a Monday. Best of luck.
- Saish -
This is probably a quick and stupid question, I am running some vantec 80mm tornadoes which are a bit loud. Well actually if you can imagine a boeing 737's engines powering up you know how load these fans are. Seriously though they are about 71 Dcb. So I would like to control their rpm depending on my needs. My question is, can the K7N2-ILSR only support two fans directly off the motherboard (the nb fan and cpu). And I have to buy a fan controller right? Or is there another way I am not aware of.
Im sure some people will tell me I shouldnt have bought these fans, but they really do push a lot of air,
Thanks everyoneI have a CoolerMaster Aerogate II control box.
It looks neat, it monitors temperatures of 4 devices and you can run your fans to it and control the speeds with a dial, as longs as the fan supports speed control.
The temps are accurate, while I'm in the bios screen I saw that the Aerogate was reporting the exact same CPU temperature as the bios was, but Aerogate was refreshing faster. (it's a real time). I have the Aerogate's diode run underneath the heatsink, right next to the CPU die.
The Aerogate has a LED screen that's blue, and the devices are selected through "channel switches."
The Aerogate cost 45 dollars (USD).
It's my new favorite toy. -
Performance issue and functional question regarding updates on tables
A person at my site wrote some code to update a custom field on the MARC table that was being copied from the MARA table. Here is what I would have expected to see as the code. Assume that both sets of code have a parameter called p_werks which is the plant in question.
data : commit_count type i.
select matnr zfield from mara into (wa_marc-matnr, wa_marc-zfield).
update marc set zfield = wa_marc-zfield
where werks = p_werks and matnr = wa_matnr.
commit work and wait.
endselect.
I would have committed every 200 rows instead of every one row, but here's the actual code and my question isn't around the commits but something else. In this case an internal table was built with two elements - MATNR and WERKS - could have done that above too, but that's not my question.
DO.
" Lock the record that needs to be update with material creation date
CALL FUNCTION 'ENQUEUE_EMMARCS'
EXPORTING
mode_marc = 'S'
mandt = sy-mandt
matnr = wa_marc-matnr
werks = wa_marc-werks
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc <> 0.
" Wait, if the records not able to perform as lock
CALL FUNCTION 'RZL_SLEEP'.
ELSE.
EXIT.
ENDIF.
ENDDO.
" Update the record in the table MARC with material creation date
UPDATE marc SET zzdate = wa_mara-zzdate
WHERE matnr = wa_mara-matnr AND
werks = wa_marc-werks. " IN s_werks.
IF sy-subrc EQ 0.
" Save record in the database table MARC
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'
IMPORTING
return = wa_return.
wa_log-matnr = wa_marc-matnr.
wa_log-werks = wa_marc-werks.
wa_log-type = 'S'.
" text-010 - 'Material creation date has updated'.
wa_log-message = text-010.
wa_log-zzdate = wa_mara-zzdate.
APPEND wa_log TO tb_log.
CLEAR: wa_return,wa_log.
ELSE.
" Roll back the record(un save), if there is any issue occurs
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'
IMPORTING
return = wa_return.
wa_log-matnr = wa_marc-matnr.
wa_log-werks = wa_marc-werks.
wa_log-type = 'E'.
" 'Material creation date does not updated'.
wa_log-message = text-011.
wa_log-zzdate = wa_mara-zzdate..
APPEND wa_log TO tb_log.
CLEAR: wa_return, wa_log.
ENDIF.
" Unlock the record from data base
CALL FUNCTION 'DEQUEUE_EMMARCS'
EXPORTING
mode_marc = 'S'
mandt = sy-mandt
matnr = wa_marc-matnr
werks = wa_marc-werks.
ENDIF.
Here's the question - why did this person enqueue and dequeue explicit locks like this ? They claimed it was to prevent issues - what issues ??? Is there something special about updating tables that we don't know about ? We've actually seen it where the system runs out of these ENQUEUE locks.
Before you all go off the deep end and ask why not just do the update, keep in mind that you don't want to update a million + rows and then do a commit either - that locks up the entire table!The ENQUEUE lock insure that another program called by another user will not update the data at the same time, so preventing database coherence to be lost. In fact, another user on a SAP correct transaction, has read the record and locked it, so when it will be updated your modifications will be lost, also you could override modifications made by another user in another luw.
You cannot use a COMMIT WORK in a SELECT - ENDSELECT, because COMMIT WORK will close each and every opened database cursor, so your first idea would dump after the first update. (so the internal table is mandatory)
Go through some documentation like [Updates in the R/3 System (BC-CST-UP)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTUP/BCCSTUP_PT.pdf]
Regards -
How can i restore my iphone 5s as i forgot my icloud password and sec questions
I bought a new iphone 5s (32G Gold)
and when I connect it to itunes asked me to restore from my old iphone 4
with all my account settings and passwords.
but I have a problem with my account for icloud password and security questions because my cloude id is *************** and with no problem with my apple id "*****************", I tried to restore my new iphone after I turned off find my iphone from icloud setting and when its restore was finished the iphone is locked and asked me to unlock the iphone with a ****************** that I forget the password and security questions and when I tried to enter my account id "**************** with no problem with its password it says to me "this account can't unlock this iphone"
when I visit tradeline (Apple products dealer) I found no answer and they adviced me to contact apple directly.
Name : Alaa Rashed Abd el Hafiz
Country : egypt
<Personal Information Edited by Host>First, remove your personal information from your post. That's not needed here. This is a public forum, and it is unwise to provide your personal data online.
Second, here's how you reset your password and/or security questions.
How to reset your Apple ID password.
Go to iforgot.apple.com and type in your Apple ID, then click 'Next'.
Verify your date of birth, then click 'Next'.
You'll be able to choose one of two methods to reset your password, either E-Mail Authentication or Answer Security Questions.
If neither method works, then go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Lost or forgotten Apple ID password'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.
How to reset your Apple ID security questions.
Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'. This will generate an automated e-mail that will allow you to reset your security questions.
If that doesn't work, or there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
Next, go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best. -
Hi, I have a new computer and new apple id. I've purchased music with my old computer, email and apple id.
I cant access now the previously purchase music, because it wants to authorize the new computer to play the
music. I cant remember password and security questions for my old id and the old email doest exist anymore.
What can I do?Hi, Carmen.
Thank you for visiting Apple Support Communities.
If you need to reset you security questions, do not know the answers and no longer have access to that email account, see the last sentence under Note in step 5.
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need tocontact iTunes Store support in order to do so.
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Cheers,
Jason H. -
Spam filtering solution for iPhone and a question.
I've read a lot of posts about spam filtering for the iPhone and have yet another solution and a question. I use SpamSieve and I am not affiliated with them in any way. The nice thing about SpamSieve is that if it is the first rule in your Mail.app rule set any mail that follows has already been filtered. All you need to do then is create another rule that redirects email to what ever mail account you choose. Since my ISP allows multiple accounts, I will simply create an iPhone@myISP account.
Now the question. Is it possible to write an applescript that will turn the redirect rule on or off so that I don't have to dig into the rules section of Mail to get this done?
ThanksIs it possible to write an applescript that will turn the redirect rule on or off so that I don't have to dig into the rules section of Mail to get this done?
not at present time -
Adding a link to expand and collapse all DHTML drop downs
Hi, can anyone help me adapt the "Skinny on Skins" example "Add a Toolbar button to expand and collapse all DHTML drop downs" so that it will work with just a simple HTML link in RH8, instead of being attached to a custom skin button?
The example looks like this:
Step 1. Open the Skins Editor for the skin where you want to add the button.
Step 2. After the preview loads into the window, ensure that the Toolbar tab has focus, then click the plus symbol. The Custom Toolbar Item dialog should display.
Step 3. Type the Item Name (This is simply an internal reference for the button).
Step 4. Type the Text (This is the text that will be seen by the end user. The field must contain something. So if you don't want any verbiage to display for your toolbar item, simply type a space.)
Step 5. Choose your Image Options, then click the Action tab.
Step 6. Click the JavaScript option button.
Step 7. Enter the following code in the OnClick field:
javascript:toggle()
Step 8. In the JavaScript area, ensure the Inline JavaScript option button is selected, then click the edit (Pencil) icon located to the right.
Step 9. Enter the following code in the Inline JavaScript dialog
var show = "false";
function toggle() {
parent.frames[1].bsscright.focus();
var arrayofDivs = parent.frames[1].bsscright.document.all.tags('DIV');
if (show == "false") {
for (x=0;x<arrayofDivs.length;x++) { arrayofDivs[x].style.display = "block";}
show = "true";}
else {
for (x=0;x<arrayofDivs.length;x++) { arrayofDivs[x].style.display = "none"; }
show = "false"; }
Step 10. Click the OK button to close the Inline JavaScript dialog.
Step 11. Click the OK button to close the Custom Toolbar Item dialog.
Step 12. Click the OK button to close the Skin Editor.
Step 13. Generate WebHelp via File > Generate > WebHelp and ensure that you have the new button selected with a check mark. This will probably require stepping through some screens to see the place where you can select it.
Many thanks
JonathanHi again
I want to use it in the header of one of my Master Pages, so it will only be created/maintained once. Not all my pages have drop downs in so rather than have a toolbar button available for every page, I was trying to be a bit cuter by having two Master Pages - one for normal pages and one for pages with drop downs in.
I'm no javascript expert so I'll see if one of my developers can help.
Thanks anyway
Jonathan -
I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error... Help!!
If you have installed a new hard drive , you will need to have formatted it in Disk Utility correctly. This may explain your problem.
Boot into your 10.6 Install disk again at the top menubar > Utilities > select Disk utility and in there select your new hard drive, and select the tab Erase and choose to make the format as Mac OS Extended Journaled. When that is finished look in the main window to make sure that the partition map scheme says GUID Partition Table.
Now go to the Restore tab and reinstall from your backup. -
Trying to download songs on iTunes and it's asking for "my 1st car I owned" and other questions that I never answered. It won't let me download anything til I answer them. Can you help me?
You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(94816)
Maybe you are looking for
-
Hello all, Am trying to do a backup job (OS windows) but am always getting the error ORA-20900: Could not find credential set DBHostCreds for target type oracle_database ORA-06512: at "SYSMAN.MGMT_CREDENTIAL", line 688 ORA-06512: at "SYSMAN.MGMT_CRED
-
Parent Child Value Sets for Item Categories
I've tried to set up parent-child value sets, not independent-dependent sets for Item Categories but in vain. So, if Item Category has 2 segments - Category & Sub-Category; Sub-Category only shows valid values for a category. For example, if Category
-
Mapping Problem ??? Context? anythng else???
Here is a decription of my problem with screenshots etc http://stephan.kaminski.googlepages.com/ximappingproblem Thanks for your help!!!! STeph
-
Is it possible to load pictures from a computer to your ipad. When modified my camera pictures and reordered them, I was unable to load them to the ipad. I could copy but not paste. If I reinstalled them on the memory card, the ipad did not recogn
-
Syncing iOS and macbook contacts?????
Is it asking too much to be able to have synced contacts?I know that Microsoft obviously has a vested interest in helping only Microsoft customers, but face it, Apple people use skype also, as problem laden as it is, it is still used. My main quandar