Expanding Horizontal plan by few more weeks

Please let me know if there is a plan option to increase the horizontal plan bucket from X weeks to Y weeks and if there is no data after certain weeks we would lilke to display as 0
Also if we want to display a column UOM from purchase agreement next to item name and description in horizontal plan (workbench navigation pane) ,how can we achieve that functionality?
Thanks for your inputs,
Kumar

Can any one please let me know the answer to the above question, as i have the same requirement, adding UOM column in the horizontal plan form in "Advance supply chain planner " responsibility
Thanks
Maruti

Similar Messages

  • Should I install my Leopard now or wait a few more weeks for an update

    Realizing that no one posts to these boards UNLESS they have a problem, I still am wondering if it is smart to wait a few weeks for an update or two. What do the experienced folks here think?
    I am running my back up as I write so will be ready to go as soon as it completes if I decide to go ahead now rather than later.
    And as a second question do the experienced folks recommend doing an upgrade or an archive and install - I'm thinking that an archive and install is the best but there seems to be some question among users here.
    Larry Nebel
    Message was edited by: LarryHN
    Message was edited by: LarryHN

    +"carbon copy cloner ... I assume it is pretty self explanatory."+
    CCC is what I use and yes, its "pretty self explanatory" and pretty easy too. Don't forget to make sure you use the correct partition type, GUID for intel Macs and Mac OS for PPS Macs. This should be done before making the clone. Also, "verify" the clone by booting it before you do anything else.
    +"...am a bit weary of my lack of knowledge and experience..."+
    Don't let that stop you. You can't really screw anything up since the whole thing is happening on a backup drive. The whole point of this is to keep your current system safe and intact until you choose otherwise. "Knowledge and experience" is just a simple way of saying that you have made more mistakes than the next guy. That's how you get the knowledge and experience in the first place!

  • [svn:bz-4.x] 16147: Fix a few more regression tests on the 4. x branch that were failing when using Spring integration.

    Revision: 16147
    Revision: 16147
    Author:   [email protected]
    Date:     2010-05-17 06:18:38 -0700 (Mon, 17 May 2010)
    Log Message:
    Fix a few more regression tests on the 4.x branch that were failing when using Spring integration.
    Modified Paths:
        blazeds/branches/4.x/qa/apps/qa-regress/WEB-INF/src/runtimeconfig/remoteobjects/ROMessage Destination.java
        blazeds/branches/4.x/qa/apps/qa-regress/WEB-INF/src/runtimeconfig/remoteobjects/RuntimeCo nfigurator.java
        blazeds/branches/4.x/qa/resources/webtier/flex_sdk_4/flex-config.xml

    Well heres my story. I tried kde4 from extra the last 3 weeks and I like it. I have used xfce for the past 3 years, previous to that gnome. Tried kde but never really liked it. Now I am only using workspace, base, mutimedia and graphics.
    Here is what I like.
    1- Dolphin, awesome I have used thunar a while and it is great but I love splitview, and fish for ssh (which has been around a while I know), and the ability to mount other partitions on my hdd with a click no fstab entry or nothin'.
    2-Pretty, I've used xfce with built in compositor an love the snappiness. But I like desktop grid with kde4 and flipswitch. Compiz-fusion is cool but I prefer not to use I'll take what the DE gives. Plasmoid are cool too.
    3- Gwenview is nice too. Use to use gqview, but thumnails are nice.
    Looking forward to or lacking
    1- Keyboard shortcuts, Yes xbindkeys is there but if I have a DE I want it to do it. They just don't work now.
    2- kde4 has windows specific settings, but I can't set the opacity for particular windows , doesn't work.
    3- Ram of course is much higher in kde4, but maybe I'm getting old I just don't care as much.

  • Optimizer creating high production plan in few buckets

    Hi,
    Optimizer is creating high production plan in few buckets though there is less demand.
    Findings
    1. system in not preplanning to cover future demand.
    2. there is one resource used by three different products for one product optimizer is doing excess planning while it is showing supply shortage for other products.
    3.If I again take optimizer run for all the three products at all the location system is giving correct results (all receipt elements in line with the demand.
    Now i need to understand the reasons why optimizer gave high production plan in last run ?
    Regards
    Abhi

    1. system in not preplanning to cover future demand.
    check storage cost and penalty cost , i think storage cost is more then penalty cost.
    2. there is one resource used by three different products for one product optimizer is doing excess planning while it is showing supply shortage for other products.
    if you run all three one by one it plan only first product on that particular resource, if you run all three same time system will plan according to the cost optimisation logic, that means it checks all cost and calculate which product needs to be manufacture on that resource and how much.
    you can check the log of snp optimisation run in
    /SAPAPO/SNPOPLOG - SNP Optimizer Log Data

  • How to get vertical rather than horizontal plan?

    Hi
    Witha complex site layout plan  it would be easier for me if child pages were shown in a vertical rather than a horizontal array.
    The horizontal array makes for much scrolling across the screen and seems to use too much visual real estate.
    How can this be changed?
    Also is there no way to show notes alongside each page in the plan?
    Thanks in advance
    David

    Hi
    Usually staff answers are thoughtful and helpful - on this occasion I find the response to be rather simplistic and narrow minded.
    1. There is no logical reason why a website could not be built irrespective of the way the planning mode controls it screen layout. After all that is what computers are really good at - separating logic from view. The only thing needed is a view modifier and I am really surprised that anyone would state with such confidence: "It can't hence, be changed in the plan mode"
    2. When each sibling can be presented in a vertical rather than a horizontal plane it would facilitate visualisation, especially for complex sites,
    3. No thought in the program design seems to have been given to the benefits which could arise from vertical presentation for printing purposes. We also need to be able to print siblings and the ability to be able to print out the site plan in vertical segments by sibling would be an invaluable planning tool.
    4. No response has been made to the need to be able to attach notes (maybe using a "notes" layer?
    Come - lets have a more thoughtful response. Like all software Muse is a work in progress and that, IMHO, is very true of Muse,. This program has a lot of potential but much needs to be done to approach a level of maturity that harmonises with other Adobe products. The absence of an inbuilt database management facilities is only one of many striking omissions which signal insufficient commitment and determination to fulfill that potential within a reasonable time frame.
    david

  • Period O in Horizontal Plan

    Hello..
    We have set our bucket types to be all periods, days=0, weeks=0, periods=18.
    When pulling up a horizontal plan in ASCP, the first bucket is Period 0.. What is the purpose of Period 0, then following is the current date Period 1.. not all the information is listed in either one.
    The Period 0 has the forecast entries but not the beginning on hand while Period 1 does not have the forecast and has the beginning on hand.
    Please provide some insight on this .
    Thanks,
    Nadi

    Nadi,
    Period 0 is past due and will show past due forecast, sales orders, and supplies.
    On hand inventory is always available today, so it is displayed in period 1.
    Regards,
    Kevin

  • ASCP Horizontal Plan - Snapshot data

    Hi All,
    We're planning to generate report based on Rolling Gross requirements as per (snapshot data on ASCP workbench).
    The Rolling Gross Requirements need to be shown for 12 weeks or 12 months as part of report.
    This is very challenging requirement, Can you please help me find (Any data points) how Oracle is currently retrieving snapshot dara for horizontal plan?
    We need to display (gross requirements) report data for 12 weeks (bucket) and 12 months (buckets) by each demand (Beginning on hand, purchase orders, requisitions, In Transit, In Receiving).
    I've reviewed package (MSC_HORIZONTAL_PLAN_SC) but It doesn't help me much in (understanding/getting) snapshot data.
    In MSC_HORIZONTAL_PLAN_SC package, there is a cursor (MRP_SNAPSHOT_ACTIVITY).
    The snapshot can be viewed on ASCP workbench in R12.1.3 with following steps
    1. Advanced Supply Chain Planner (ASCP) super user Responsibility
    2. Nav: Supply Chain Plan -> Workbench
    3. Select a Plan
    4. Go to Supply/Demand
    5. Select a record (Criteria:Supplier; Condition: equals ; From: <Supplier_Name>) and click Find button
    6. Right-click -> Horizontal Plan
    7. For each item, Rows shows [sales orders, Forecast, Dependent demand, Gross Requirements, Work orders, Purchase orders] and columns show [weekly and daily dates]
    Appreciate your help, Thanks in advance.
    Regards,
    Kal

    Hi,
    Are you having trouble in arranging a weekly/monthly pattern or having problem with Data.
    Weekly/Monthly pattern is possible to create.
    Chintamani

  • Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. Please help!

    Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.

    ejwoodall wrote:
    It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
    Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
    I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
    The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
    If your machine performs flawlessly, it may be a router issue.
    If your machine has connectivity issues there, it may be a hardware problem with your machine.
    There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
    But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
    In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

  • HT1414 IPHONE 3GS Problems. Updated to IOS6 then says There are just a few more steps to take. Press Continue. Once pressed it says connect to itunes. So plugged the cable in and it does nothing and stays on that screen. How can he fix it?

    Hi, My friend has just updated there 3GS to IOS6 and once it's done, 2 screens appear. first one says, Update complete, there are just a few more steps to take. Press continue and another screen comes up with the itunes symbol and the cable and says connect to itunes. Once plugged in, on itunes it reconises the phone and has the loading symbol up, but it doesn't loads anything and can't press anything. Anyone know why and how to resolve this?

    The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
    You're on your own.  Good luck.

  • I started making a movie and all was well. I added a few more pictures and some sound and played it back. It plays so far and then the pictures break up into colors and then the screen turns green.  The sound continues.

    I am making a movie from still pictures. I used no theme and then started adding pictues. When I played it back, all was well. Then I added a few more pictures and some sound. When I play iot back it plays just so far and then the sound continues, but the screen turns green or the pictures break up into colors.

    Sorry, everyone.  I think I may have figured out what it was all down to...........
    I had left the IDE ribbon cable plugged into my third HDD, with the power cable unplugged.  I did this so as not to endanger my years of work on the third drive, until Windows had setup.  I have in the past, accidentally chosen the wrong partiton to format, so this seemed a good way to avoid it from then on.
    This was not a problem on my old system, but it seems this system doesn't like it.
    I must have left the drive completely unplugged, the times Windows did setup.  Amazing really.  I couldn't see the woods for the trees.
    Anyway, I'm sorry to have bothered everyone with my problem.
    Cheers
    Marcus
    edit :   Sorry Syar2003, I didn't see your reply until I had posted mine.  Many thanks for taking the time to try and help me, it seems as though I may have sorted it now.  I am using IDE drives until I can afford SATA.  But many thanks for the heads-up on the NF4-SATA compliance, I'll be sure to bare that in mind.
    I didn't actually check the NVRAID/IDE ROM version before updating the bios, so I have no idea if the revision was changed when Liveupdate flashed the Bios, I'm afraid.  I didn't know they would be updated at the same time.
    Again, cheers
    Marcus

  • Can theme template pages be expanded horizontally?

    Can iWeb '08 theme page templates be expanded laterally? I know the page templates can expand downward but am wondering if they can be made wider?
    Thanks in advance for your reply.
    Tom

    Thanks Old Toad and I have continued question for anyone,
    Okay, for an example of what I am writing about:
    In iWeb '08,
    Choose New Page:
    Choose Layered Paper as a Theme> choose Welcome Page.
    In the Inspector>Page>Layout
    Type in 800 px in the Content Width
    On my screen the content area expands horizontally but is broken and separates from the central light yellowish block that has rounded corners.
    Does anyone know if it is possible to expand the width of the central light yellow block?
    Thank you anyone in advance again.
    Tom

  • Setting up a few more things 100%

    Im stuck at 100% everytime I update and I have to roll back previous version of windows every single time, how can I stop this from happening again?

    Hi RocketSashimi,
    What is the current situation?
    If the new build still could not be installed, please uninstall any 3rd-party Antivirus software if installed, after that, check if we could install the new build again. A similar thread for reference:
    Stuck at "Setting up a few more things
    100%" when upgrading to build 9860
    Or
    We may consider to do a clean install with the newly Windows 10 9879 ISO, which is download available from the following link:
    Download Windows Technical Preview November Update
    http://windows.microsoft.com/en-us/windows/preview-iso-update?os=win10
    Enterprise version:
    http://www.microsoft.com/en-us/evalcenter/evaluate-windows-technical-preview-for-enterprise
    Best regards
    Michael Shao
    TechNet Community Support

  • HT201407 iphone 4 update complete asking me to follow few more steps and connect to wifi. Now my wifi is not working how to resolve this problem

    iphone 4 update complete asking me to follow few more steps and connect to wifi. Now my wifi is not working how to resolve this problem

    what happens when yu try to connect to wifi?

  • How to add few more columns in UWL screen

    Hi all
    Currently by default we are able to see the columns in UWL header as "Subject", "From", "Sent Date" , "Due Date" , "Status" .
    now i want to add few more columns  apart from standard columns.
    can you please let me know how to add our own columns in UWL header ??  if it is XML changes then pls let me know which xml file exactly we need to change??
    Thanks
    Sunil

    Hi Harini
    actually Standard XML file is not necessary for changing the column names in the UWL .
    we can use otherway as follows.
    go to system admin->UWL administration->click to configure item types and custom views using a wizard then it will take you to another screen -> select the radio button "Customize the look of the UWL main page" click on next then you can select what ever task item you want to change and click on the button respective button at the right end then it will take you to new screen there i added new columns  what ever required and saved also but the same one is not reflecting in UWL....
    can you please check the same in ur machine and let me know if any other things are required to be done and why this not been done our requirement??
    Regards
    Sunil

  • [svn:fx-4.x] 15178: A few more corrections/ additions to the layoutDirection style ASDoc.

    Revision: 15178
    Revision: 15178
    Author:   [email protected]
    Date:     2010-03-31 12:49:26 -0700 (Wed, 31 Mar 2010)
    Log Message:
    A few more corrections/additions to the layoutDirection style ASDoc.
    QE notes:
    Doc notes: None
    Bugs:
    Reviewed By: Hans
    Tests run: checkintests
    Is noteworthy for integration: No
    Modified Paths:
        flex/sdk/branches/4.x/frameworks/projects/framework/src/mx/core/UIComponent.as

    This is a duplicate post.  This should be locked to avoid further confusion.
    My CSS wont change
    Nancy O.

Maybe you are looking for

  • "upcoming events" snippet/widget for iweb

    Just wondering if anyone has any ideas on how to create an upcoming events snippet for an iweb page. Here's what I would like to do: I am an athletic director and would I have entered all of my school's athletic contests into iCal. I would like to se

  • Lost iPod in fire and trying to restore files from external hard drive

    I've got a similar issue to folks who are trying to restore their Library from an external source, but with a new twist. We suffered a house fire, and my iPod was destroyed. Amazingly an external hard drive I had done some backups to survived (mostly

  • OS 10.4.3 won't go to sleep

    This is a major flaw with 10.4.3. I have read all the forums and I guess it's because I have an external hardrive using firewire and a couple of USB gadgets. But that is no excuse! I don't like that my computer is on all day long--never had this prob

  • Unable to open or re-install iTunes

    I am not able to open iTunes, I get the message 'this application has failed to start because MSVCR80.dll was nit found.' I tried to reinstall itunes, but it does not work either.

  • MacBook will not install latest security update

    My macbook pro will not install the new security update. Can any help??