Expanding the NIC on a Cisco 3315 NAC/ISE appliance

Hi All,
Is it possible to add another NIC to the Cisco 3315 NAC appliance. It ships with Four ethernet interfaces, but would like to add at least 1 extra interface i.e. PCI card if possible
thanks
LD

Other interfaces can be used for the various probes, like SPAN, DHCP, etc.  Also for inline posture, you can see there are multiple interfaces needed when using high availability.
References:
ISE Config Guide - Configuring Probes (note the various probes that have an interface option)
http://www.cisco.com/en/US/partner/docs/security/ise/1.1.1/user_guide/ise_prof_pol.html#wp1555646
Cisco Identity Services Engine User Guide, Release 1.1.1, Setting up Inline Posture
Figure 10-4 Inline Posture Routed Mode High Availability Example
http://www.cisco.com/en/US/partner/docs/security/ise/1.1.1/user_guide/ise_ipep_deploy.html#wp1140749
Jatin Katyal
- Do rate helpful posts -

Similar Messages

  • How do I expand the view of all day events in iCal?

    I am unable to find an answer to this question any where.  Is it possible to expand the area in iCal where all day events appear in the day and week views?

    Did you ever get an answer on this?  I can see everything in the DAY view but need to see the all day events in the week view.  I have events that start on say the 15th and run to the 21st.  I've started putting the end date in the location field but it was so much nicer when the all day even portion expanded to allow you to see all of them without having to scroll.  Having to use the DAY view makes it really hard to schedule.  Any chance this will change in the new version?

  • One more solution for Silent Monitoring Windows 7 64-Bit - ERROR VOIP2037 Unable to open the NIC adapter for sniffing.

    Hi,
    we are using UCCX 8.5 SU3.
    After replacing the actual agent workstations with Windows 7 64-bit we had to face problems with the silent monitoring. (no sound at all and in the CSD the usual error popup "Silent Monitor-Session failed...").
    In the CAD logfile I found the errorcode. "ERROR VOIP2037 Unable to open the NIC adapter for sniffing. Please reconfigure the installation."
    After investigating the logfiles, starting postinstall.exe a hundred times and reading the Configuring and Troubleshooting VoIP Monitoring Guide.
    I just learnt about the wonderful tool nicq.exe.
    And so i found out that the driver spcd.sys wasn't installed.
    Check in the registry for "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SPCD"
    It seems to me that the "Cisco Supervisor Desktop.msi" never installs the driver one a Windows 7 64-bit.
    After starting the NICQ.EXE as administrator the driver is being installed.
    Test 1: Check Driver Status
    Driver not installed. Attempting to install it...
    Driver has now been successfully installed.
    SPCD Driver service is not running. Attempting to start it...
    SPCD Driver service is now running.
    Test 1: SUCCESS
    And after that the silent monitoring works again like a charm.
    Maybe that info help someone.
    kind regards, sebastian

    Excellent information, this has been driving me crazy for a while now.  Once i saw this info I was able to get it resolved rather quickly.
    +5 for you, (I tried to click it above but it would not let me.)

  • PS CS6: It'd be helpful to have the option to collapse or expand the nested groups and layers.

    PS CS6: It'd be helpful to have the option to collapse or expand the nested groups and layers all at once.  Autodesk Maya has a similar feature in it's outliner that allows for you to do this.

    And as Jeffrey Tranberry answered there:
    • Open/close all layer groups (folders) at the current level of hierarchy: Cmd-click the arrow next to the group - This is handy when you want to open/close, say, all the top-level groups without disturbing the open/closed state of any groups nested within them.
    • Open/close all layer groups nested within the current one: Opt-click the arrow next to the group - This is nice when you want to open/shut a bunch of nested groups, without affecting any that lie outside the target group.
    • Open/close all layer groups, period: Cmd-Opt-click the arrow next to a group So, to keep things simple: when in doubt, Cmd-Opt-click a group’s arrow and you’ll collapse/expand all groups.
    * On Windows please substitutes Ctrl for Cmd and Alt for Opt. .

  • Cisco Wireless NAC Appliance - Design Practices ??

    Hi,
    I have a new Cisco WIreless NAC appliance, the purpose of which is to manage the Guest users access to network. I have been searching for some best practices related to the design of this appliance but havent found one.
    Can anybody help me in sharing his design experience or any docuement which would be guiding in deciding over the design / placement of this NAC device in network.
    Thank You.

    Hi,
    there is nothing such as "Wireless Nac appliance".
    The question is "do you have the NAC Guest Server" or the "Nac appliance Server and Nac appliance Manager (CAS/CAM)" ?
    Because those are just not the same at all.
    Then on the wireless side, do you have autonomous APs or a WLC ?
    Sorry to ask, but there's just so many possibilities you could be asking that we need to clarify.
    My bet is that you are either looking for this :
    http://www.cisco.com/en/US/partner/products/ps6128/products_configuration_example09186a0080a138cc.shtml
    or for this :
    http://www.cisco.com/en/US/partner/docs/security/nac/guestserver/configuration_guide/20/g_hotspots.html#wp1092277
    Nicolas
    ===
    Don't forget to rate answers that you find useful

  • Has anyone used the wiki behind a Cisco WebVPN?

    I'm trying to use the wiki behind a Cisco WebVPN with little success.
    What I think is going on is that as pages are downloaded to the browser, the WebVPN (as it should) translates each link into a WebVPN-specific link (acting essentially as a proxy). When you edit the page and submit, these links get submitted through the web service with the translated links intact, now setting all previously internal links into unusable external links. For some reason the result of this is a page with links fails to save.
    Has anyone written a APCF (Application Profile Customization Framework) file that might take care of this, or some imaginative proxy bypass rules or something else? I can't believe I'm the first person to use a combo of a Cisco ASA WebVPN and the Snow Leopard wiki. Any other ideas short of using an ipsec VPN instead?

    Ahhh the days of the Creative Nomad Jukebox MP3 Player. Thanks for the bringing back the memories Apple! I had one of those and the USB 1.1 transfer rate took HOURS to fill the Nomad's 6 GB drive. Once it was full, minor updates to playlists were tolerable.
    So now for anyone with a pre-2003 Mac will have to cope with USB 1.1 transfer speeds, specifically iBooks and PowerBooks. Desktop Macs can simply add a USB 2.0 card to resolve that problem.
    Still, the iPod Nano is a huge improvement over the Mini. FireWire would have been nice since the original iPod was a FireWire device. But, to keep the form factor small, they had to decide on only one transfer protocol...so I guess USB 2.0 won.
    Also, Apple will never get rid of FireWire, not even when they start shipping Intel-based Macs. Digital Video is huge, and so is iMovie and Final Cut Pro.

  • In iCal and Notifications on a notebook, is it possible to expand the notes window to make it easier to read and write notes?

    In iCal and Notifications on a notebook, is it possible to expand the notes window to make it easier to read and write notes? In the past, I have used Outlook calendar and tasks and I was able to expand the windows which allowed me to put a great amount of details into either the notes section in events and tasks. It would be great to be able to do this in iCal and Notifications as well. I am using a Macbook Pro with OS X 10.8. Thank you very much for assistance with this.

    HI,
    Try Spaces for a virtual desktop.
    http://www.ehow.com/how2189851use-spaces-mac-os-x.html
    Carolyn

  • Unable to open 2 9509 switches at the same time in Cisco Device Manager

    Dear Friends,
    There are a pair of MDS 9509 switches whose management addresses are 172.16.2.197 and 172.16.2.198.
    When we try to manage these Devices through Cisco device manager, the first device opens up without any problem, but when the second 9509 is opened in Cisco Device Manager, it fails giving the following error message:
    "Open udp transport failed: Address already in use: Cannot bind"
    To get around this issue, if we close the first interface to the 9509 switch, then we are able to open up the second 9509 in Device Manager.
    We have this problem only in Cisco device manager. If we open one switch in Cisco device manager and the other switch in Cisco Fabric Manager, it works.
    Also, we can telnet to both the devices successfully at a time.
    The device manager in use is 4.1.
    Please find enclosed the sh version outputs for your kind reference.
    Can you please help me understand the cause of this issue?
    Thanks a lot
    Gautam

    Is it always the same MDS that fails to open, or can you open either one first, and then the second one poses the problem (no matter which one is second)?
    Can you try from a second work station and see if you can open DM to both switched at the same time? I suspect the address it is complaining about is the local workstation IP, not the MDS IP.
    If you open the FM map, then you click on the MDS ICONs, can you open DM to both MDS?
    - Mike

  • Interactive report - Is there an easy way to expand the width of a column to allow for more data on a line.

    Example.
    One of the columns in my interactive report is labelled Notes.
    The data in the column looks like
    I really
    enjoy
    typing up
    notes,
    please
    disregard
    Is there any way to get this note all on one line - or atleast expand the width to increase or decrease the number of characters per line.
    So either
    I really enjoy typing up notes, please disregard
    Or
    I really enjoy typing up notes,
    please disregard
    Thanks in advance.

    Hi Mikez,
    You can also consider to render your "Notes"-column as a textarea, eg:
    http://apex.oracle.com/pls/apex/f?p=vincentdeelen:23:
    For the text area you can define the default number of rows and column width you want. You render a column as text area with an apex_item function:
    select apex_item.textarea(3,NOTES,1,80) from MY_TABLE
    Where 3 is the index number that you want your NOTES colum to have and 1 and 80 stand for row and column width respectively. When you use apex_item for a column, make sure to set that column as "Standard Report Column" under "Report Attributes".
    More info on apex_item:
    Oracle Application Express APIs
    Regards,
    Vincent Deelen

  • Can you expand the text boxes in iCal?

    I downloaded a few sports team schedules to my iCal, but when I print out the monthly calendar only a small part of the text shows up. For example, the school and time show up, but not the opponent and venue. Is there a way to expand the text boxes so the full text shows up? There is plenty of white space on each day. Thanks!

    No - you can do pages in other programs and use them
    LN

  • Is there a way to expand the editing bubble in iCal 3?

    I can't figure out how to expand the size of the notes field in the iCal 3.0.3 editing bubble. Is it possible to expand it? You can expand the size of a text area in Safari, but you can't expand the notes field in iCal?!!! Even more frustrating is that when you add more text than can be viewed at once in the notes field, it doesn't scroll to the next line so you can see what you're typing -- you have to scroll manually after each line is entered. What's up with that?!!! I haven't upgraded to 10.5.4 yet -- does that fix any of this?
    I'm very, very frustrated with iCal in Leopard. I want the drawer back -- or at least some more reasonable way of editing events.

    Hi Patrick,
    I'm working on a 30" monitor, so it's effectively 2560x1600.  It only seems to be showing 2 tracks at a time, unless there is a preference or setting I'm missing that I can't seem to find in the documentation.  Here is a screenshot:
    I don't see any areas for expanding the timeline.  I can scroll vertically in the timeline, but I can't seem to actually get a larger static vertical area for showing more tracks at once.  The only vertical resizing widget is to expand the bottom or top panels, not the timeline.
    Thanks,
    Jason

  • Is there a way to expand the number of layers shown in a timeline?

    Hi,
    Right now it seems I can only get two layers to show in the timeline at any given time.  I don't see any way to resize the timeline so that when applying more grading layers, I can see all the layers at once without having to scroll the timeline view.  Is there a keyboard short-cut I'm missing, or some widget on-screen that can let me do this?
    Thanks,
    Jason

    Hi Patrick,
    I'm working on a 30" monitor, so it's effectively 2560x1600.  It only seems to be showing 2 tracks at a time, unless there is a preference or setting I'm missing that I can't seem to find in the documentation.  Here is a screenshot:
    I don't see any areas for expanding the timeline.  I can scroll vertically in the timeline, but I can't seem to actually get a larger static vertical area for showing more tracks at once.  The only vertical resizing widget is to expand the bottom or top panels, not the timeline.
    Thanks,
    Jason

  • Is there a way to expand the text area of the login/lock screen for the warning message?

    I put our company's standard warning message in the Security & Privacy system preference ("Show a message when the screen is locked.") and it overflowed the allotted text area for the warning message text on the login screen and lock screens.  It seems that the area allows about 250 character messages and I need to provide about 500 characters.  Is there any way to expand the text area allotted for this purpose?
    Bob Reed

    To be a little more specific about the challenge I'm facing, I want to increase the allotted text space for the field I've outlined in the attached image.  Seems like there ought to be a NIB file that could be edited to accomplish this task:
    I would appreciate any advice on which file should be edited to expand the text field.
    Bob Reed

  • Calendar - How can I expand the recurrences of a recurring item in ItemAdding event receiver?

    When a user add a new recurrence event to a calendar I want to check if any of the recurrences overlap with events already in the calendar.
    I saw the property Recurrences Data and its XML but I didn't find a way to translate that value to dates I can test against the events dates on the calendar.
    So, is there a way to expand the recurrences of an event in the ItemAdding event receiver of a calendar?

    Hi,
    Per my understanding, you might want to check if there any overlapped recurring events in Event Receiver.
    You can build the query with <DateRangesOverlap> to return the recurring events with Server Object Model.
    A code demo in the thread below about how to get recurring events from Calendar for your reference:
    https://social.technet.microsoft.com/Forums/en-US/99c3ded6-a8cb-4509-9a74-e93e445d78c7/how-does-calender-list-daterangesoverlap-todaymonthyear-and-week-exactly-work?forum=sharepointdevelopmentprevious
    Thanks
    Patrick Liang
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Is it possible to expand the area of the desktop?

    Is it possible to expand the area of the desktop?
    What I mean is, in a way similar to how you can expand the viewing area of the finder. For example, If you set finder to arrange icons - by: none, then you can slide the icons out of the field of view and scroll around to different areas of the finder window. I have a folder of movies that I have no arrangement settings, the finder window spans pretty far in all direction and I simply scroll around within in finder. So I was wonder is that feature is possible with the desktop, so that I could essentially slide an open program off the screen and scroll over to it later and basically pane around the desktop. It would sort of be like zoom but I would retain the same resolution or clarity of the screen with it getting pixilated.

    HI,
    Try Spaces for a virtual desktop.
    http://www.ehow.com/how2189851use-spaces-mac-os-x.html
    Carolyn

Maybe you are looking for

  • BEx Web Application or Query as iView in the Enterprise Portal

    Hi, I am integrating BW System in to Enterprise Portal. the following link shows http://help.sap.com/saphelp_nw04/helpdata/en/ab/9659400d9d1059e10000000a155106/frameset.htm Sequence of Steps We recommend that you execute the necessary steps in the fo

  • Unacceptable Errors after 10.5.2

    This needs to be fixed: 1. Audio skipping horribly- rendering my entire music library unlistenable. 2. Video's in Quicktime/VLC skipping horribly 3. Iphoto Slideshows skip and pause horribly 4. Computer won't wake from sleep I have observed Activity

  • Contract in two languages and two columns parallel on each page?

    I'm writing a long contract in two languages and want two columns parallel on each page. The column should break every time to the next page and not to the top of the same page. anybody with some helpful advises please?

  • Screen Pixelation after Mountain Lion upgrade

    I upgraded to Mountain Lion on my Mac Pro recently.  For the first week or so it worked great, but a few days ago I woke the computer from screen saver and the screen was covered with these random pixels all over.  Here is a link to a screen shot I t

  • Relicate Datasources from ECC to BW

    Hi, I ran into a issue while using newest version of BW system. In old version, i did not have to choose such as image below when i relicated my datasources. When dialog box appeared, i have chose as above, but, i could not create infoPackage for my