Expanding wireless network with Airport Express but without Airport Extreme

Hey guys,
I was wondering if I can expand my wireless network with my Airport Express without Airport Extreme base station. I have a Netgear wireless router. Is it possible? Can you give me tips on how to set it up?
Thanks a lot!
Marc

marcribeiro, Welcome to the discussion area!
No that is not possible. The Netgear is not compatible with Apple's WDS.

Similar Messages

  • How can I expand my wireless network with a Time Capsule and Airport Express?

    My entire house is wired for ethernet access (2 floors).  I have a Time Capsule on the 2nd floor that reaches the entire house except for one room. 
    In this one room I have an ethernet port plugged into an Airport Express. 
    The problem I encounter is that I have two separate wifi networks with two separate names.  I realize I can extend the wireless network on the 2nd floor to the 1st floor but I can only do this wirelessly to my knowledge, and the entire problem is that the signal doesn't reach the front room.  Also, there is really no place in-between that the AE can be placed to extend the reach.  The building is concrete and steel, I think that has a lot to do with the problem.
    My question is: Can I have two wireless routers (connected to the same home network via ethernet) broadcast the same wifi network?  I also have a SONOS system that further complicates things, I'm afraid.  Would it help if I drew some sort of diagram?
    Thanks!

    Your network is not working as you describe.. or I have misunderstood the layout..
    What is the broadband type? Modem is where? What is the main router?
    From your screen shots the main router is the airport express that covers one room which seems wrong.
    Why isn't the TC the main router? or both bridged.. if you go back and look at the apple document.. one or both apple routers are in bridge mode..
    You are having issues with setup .. half of which is caused by v6 airport utility.
    What OS are you running? Please install 5.6 utility.. do it.. do it now!!
    Easy for Lion.
    http://support.apple.com/kb/DL1482
    Messy but possible for ML.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

  • Extending TC wireless network with AP Express

    I just set up a brand new TC last week, and am thinking about buying a new AP Express to extend my wireless network into the basement. I've read through some of the threads here and it seems pretty straightforward, esp. since both devices will be 802.11n compatible.
    The one question I have pertains to MAC access control, which I have enabled on my TC. Does the AP Express' AirPort ID need to be added to the MAC access control list on the TC if I'm setting up the AP Express to extend a wireless network? I assume that any devices that connect wirelessly to the AP Express will need to have their MAC addresses added to the access control list as well, just as if they were to connect to the TC, correct?
    Also, do I need to make an Ethernet connection from the TC to the AP Express for the initial setup, or is it all done wirelessly? I will have the AP Express in the same room as the TC when I set it up and then gradually move the AP Express to its final location, somewhere between the TC and the basement (probably in the basement hallway near the door).
    Message was edited by: plarkin

    Welcome to the discussions!
    +Does the AP Express' AirPort ID need to be added to the MAC access control list on the TC if I'm setting up the AP Express to extend a wireless network?+
    Yes
    +I assume that any devices that connect wirelessly to the AP Express will need to have their MAC addresses added to the access control list as well, just as if they were to connect to the TC, correct?+
    Yes, you will need to compile a MAC control list for the AirPort Express
    +Also, do I need to make an Ethernet connection from the TC to the AP Express for the initial setup
    It's quite a bit simpler and usually more reliable if you do it this way
    +or is it all done wirelessly?+
    It can be, but this is sometimes confusing for users because the AirPort Express creates a default wireless network that you must log onto to be able to communicate to the device using AirPort Utility. This usually requires you to "switch" wireless networks for the configuration, then switch back again to your normal wireless network after the configuration is completed.
    There's no switching involved if you simply temporarily connect an ethernet cable from your computer to the AirPort Express for the configuration and then disconnect it once you have updated the device with its new settings.
    +I will have the AP Express in the same room as the TC when I set it up and then gradually move the AP Express to its final location, somewhere between the TC and the basement (probably in the basement hallway near the door).+
    That's an excellent plan

  • Extending a non-Apple wireless network with Apple Express?

    Is it still impossible to use Airport Express to extend a network based on non-Apple router - e.g. Verizon? If not, then can someone explain the source of theis incompatibilty to me?

    Is it still impossible to use Airport Express to extend a network based on non-Apple router - e.g. Verizon?
    Apple designed their "extend" feature to work with other Apple routers....maybe to get you to buy more Apple routers. Other manufacturers pretty much do the same thing.
    There is actually very little compatibility between manufacturers as far as extending a signal wirelessly......for example, Cisco will not extend Netgear. Actiontec will not extend 2-Wire and the list goes on.
    A few manufacturers....Netgear is one.....offer what they call a "universal" extender or repeater. How "universal" the product might be is open to question, so if you decide to try a "universal" extender, it might be a good idea to understand the store's return policy before you buy.

  • I have an airport extreme and am trying to extend the range of the wireless network with an airport express.  I set it up with the help of apple support, both lights are green on both airports, but the range didn't change.  What could be wrong?

    I am trying to extend the range of my wireless network by adding an airport express to an airport extreme.  I configured it with the help of apple support, but it hasn't changed the range that I can access the internet wirelessly in my house.  What could be the problem?  Does weather affect the wireless network??

    So, on the Extreme you checked the box to "allow this network to be extened" ?
    Correct?
    And on the Express, you set it up to "Extend a wireless network" ?
    Correct?
    See this Apple article and see if you missed anything...
    http://support.apple.com/kb/HT4145
    To learn about other options for expanding your Wi-Fi base station wireless network and things you should consider before expanding your network, click here.
    Set up: Components of an extended network
    ➊  Primary Wi-Fi base station (this is the base station connected directly to the Internet)
    ➋  Extended base station
    Configuring a wireless extended network
    To create a wireless extended network, you must place any extended Wi-Fi base stations within range of the primary Wi-Fi base station.
    Start with the device that will be configured as the primary Wi-Fi base station.  Then configure your extended Wi-Fi base stations, ensuring that each is within direct range of the primary Wi-Fi base station.The physical location of extended Wi-Fi base stations will vary according to the building environment and may require some experimentation.
    If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.

  • I am unable to join my existing wireless network with new AirPort Express

    I am unable to join my existing wireless network with new AirPort Express.
    I am using a DLink DI-524 Router, Windows 7 (64), and the AirPort Express.
    AirPort Utility will not recognize the AEX wirelessly, it will only recognize it when it is connected by Ethernet. I can then configure the AEX and verify that the settings stick once disconnected and then reconnected. However, even after that, it will not recognize the AEX once disconnected from the Ethernet cable.
    I followed the suggestions of several other threads on these forums. But I am unable to get the AEX to work.
    Any suggestions? Thanks in advance.

    Welcome to the discussion area!
    It's almost always a security setting that causes problems when the Airport Express (AX) tries to join a third party wireless network. The AX usually does not "join" correctly and that's why you can't see it on your wireless network using AirPort Utility.
    Using an ethernet cable is still the more reliable way to configure and adjust the AX, but if you are want to try to configure it using wireless, you must return the AX back to factory defaults as follows:
    Power down the AX
    Hold in the reset button +and keep holding it in+ as you plug the AX back in to power
    Release the reset button after 10 seconds
    When it is set to factory defaults, the AX broadcasts a wireless signal with a network name like "apple network xxxxxx" where the "x's" are either letters or numbers. You must look for this network by clicking on the fan shaped Airport icon at the top of the screen. If you don't see this network, then click Join Other Network to search that way. Unless you connect to this network, you will not be able to configure the AX using wireless.
    Do you know the exact security type that your D-Link router is using? That is the key element in the process.
    Open AirPort utility, click Manual Setup
    Click the Base Station tab to establish a name for the AX, device password and adjust time zone settings
    Click the Wireless tab
    Wireless Mode....Join a wireless network
    Wireless Network Name...must exactly match your D-Link wireless network name
    Enable ethernet clients if you want the port to be active (your D-Link must be compatible with ProxySTA for this to work)
    Wireless Security...exact setting of the D-Link network. WEP security causes a lot of issues. Try to use WPA/WPA2 Personal, which is far more secure.
    Wireless Password...must match the D-Link network
    Click the Music icon to enable AirTunes
    Click Update to save settings
    Any luck?

  • Unable to create a wireless network with my airport express.  Please help!

    I am trying to setup a wireless network with an airport express, and connect to it with my Macbook. I just bought both of these and haven't been able to get wireless to work.
    I initially plugged the ethernet cable from my cable modem into the airport express and plugged it into the wall. The macbook detected it when I opened airport utility, but the express had a flashing amber light and I was unable to connect. I then unplugged the express and re-started the cable modem. This time, the airport express showed a solid green light -which should mean that it is working correctly. However, the macbook did not find the airport express device when i searched for it using airport utility. I am able to connect the macbook directly to the cable modem, after re-starting the modem, and access the internet so at least some of the systems are go.
    Any ideas? Thanks in advance for your help.
    Tom

    Is the issue that you cannot access the 802.11n AirPort Express Base Station (AXn) with the AirPort Utility that is running on your Win7 PC? ...  or that once you have configured the AXn, the PC is unable either to find the new wireless network or can find it but cannot connect to it?

  • Extending an existing wireless network with an airport express

    My wireless signal is quite weak in my room so I'm looking for a way to extend the range of the network by using an airport express. I understand i can't do this wirelessly but is it possible to run an ethernet cable from my existing router to the airport express in my room and then have a stronger signal in my room?
    Thanks in advance!

    Welcome to the discussion area, Aaron!
    If you connect an ethernet cable from your existing router to the AirPort Express, and then configure the Express to "Create a wireless network" with the same name, security settings and password, this will in effect, extend your current wireless network.
    The Express must be configured as a "bridge" to operate correctly on your network when you do this, meaning that the setting for Connection Sharing on the Express will be set to "Off (Bridge Mode).

  • I have airport express but it is not recognised by either my macbook pro or my ipod on my wireless network. It does not show in airport utility. Might I not have an airport card?

    I have airport express but it is not recognised by either my macbook pro or my ipod on my wireless network. It does not show in airport utility. Might I not have an airport card? How would I know. Airport utility in my mac says no other devices connected.

    I have airport express but it is not recognised by either my macbook pro or my ipod on my wireless network. It does not show in airport utility. Might I not have an airport card?
    If both your MacBook Pro and iPod are unable to "see" the Wi-Fi network provided by the AirPort Express, it is most likely NOT that you are missing an "airport card," but the Express may be the issue instead.
    One quick test is to see if either device can "see" other Wi-Fi networks. If they can, then you can definately rule both of them out as the issue.
    By default, the AirPort Express will broadcast an unsecured Wi-Fi network with a network name of something like: Apple Network NNNNNN. Can either device see this network? If not, then I would recommend that you perform a "factory default" reset on the Express, and then, check again.

  • Extend existing wireless network with airport express..impossible?

    I have tried to extend my existing wireless network with an airport express, but it seemd that I always need a ethernetcable...apple support insured me it is possible but the airport utility software only allows me to extend using a cable it seems....

    Couple of thoughts here.......
    The AirPort Express will only extend a wireless network if you have another Apple router providing the wireless network to be extended.
    Is your "main" wireless router an Apple product?  If yes, what model number do you have?
    It would also help if we could get the model number of the AirPort Express. Some older versions are not capable of extending a wireless network.

  • How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

    How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet

    This Apple support document provides good general information on configuring different types of neworks using multiple AirPort routers.
    http://support.apple.com/kb/HT4145
    In particular, you would want to focus on the information regarding a "Roaming Network"

  • Extend wireless network with AirPort Express

    How to extend the wireless network with AirPort Express and Belkin PlayMax as the primary router ?

    How it work if I have an AirPor Station and 4 Airport Express, I actually also have an old TimeCapsule and an old AirPort Express. Can I cover all my house (around 300 m2). And will the old Airport slow down or convict with the new ones?

  • Establishing a wireless network with airport express

    Can someone please help me setting up a wireless network?
    I'm using netgear DG834GT and want to set up a wireless network with my airport express. Unfortunately i cannot set it up and need someone to help.
    Thank You

    If you want to configure an Airport Express to work with the existing wireless network created by your DG834GT wireless router, then follow the advice posted here by David Lovel (the advice is applicable to both Mac and PC users):
    David Lovell, "Airtunes for XP with a Wired/Wireless network" #1, 09:05pm Jan 8, 2005 CDT
    I hope you really did mean to say you were using an Airport Express. Don't confuse an Airport Express with an Airport Extreme card - the Airport Extreme card is the name of the wireless adapter built into your Powerbook.

  • Troubling extending wireless network with Time Capsule and Airport Extreme

    I am trying to set up and extend a wireless network in my house, but it’s not working right. I have two Airport/Capsule units in the house:
    2TB Time Capsule (Dual-Band II)
    1 Airport Extreme (Dual Band)
    I have the Verizon Fios router as my gateway to the internet, and also as my DHCP server. I have also tested the ethernet ports in my house to verify that they work, and that I can get a DHCP-issued IP address.
    Now, my Verizon router has WiFI, and it’s still on. I am not using it though except to troubleshoot. So far as I understand, this should not cause a problem.
    Base station setup
    So I setup the TC to Create A New Wireless Network, on the ethernet network it’s on (Dlink switch plugged into Verizon router). I set it up in Bridge Mode (as opposed to having it dole out IPs, since the Verizon router does this already). The TC gets a valid IP, and my wireless device connect to it without a problem. I have checked “Allow this network to be expanded” under Wireless settings.
    Extended station setup
    The AE Dual-Band is plugged into the Ethernet, and is reset to Factory Settings. I name it “Airport Extreme 2” and I chose “I want Airport Extreme to join my current network.” The other two options are: “I want to create a new wireless network” and “I want to replace and existing base station or wireless router with Airport Extreme.”
    I chose to “join,” I select “I want to connect Airport Extreme to my network using Ethernet to extend my existing wireless network.” The other options are to disable wireless entirely, or to “wirelessly join my current network.” On the next page it asks me to select the device or network that the Airport Extreme will connect to using the Ethernet. I set it to the Time Capsule.
    Results:
    Access near the Airport Extreme 2 is incredibly slow. Speedtest shows I am getting less than 1Mbps. Worse yet, my mail client won’t connect. It just times out.
    What I had hoped was that the AE would connect via Ethernet to the network, and just bring the wireless network to the other side of the house. Instead it almost seems as though it is just re-amplifying the TC’s signal. Otherwise, why is performance so bad?
    Thanks to anyone with some insight here!

    Hello Kennuff. Welcome to the Apple Discussions!
    Since you have the ability to connect all of the routers by Ethernet, there is no need to configure the Time Capsule (TC) & 802.11n AirPort Extreme Base Station (AEBSn) for a dynamic WDS (aka, extending a network). This option is only when the routers do NOT have an Ethernet connection between them.
    Instead, you want to configure the TC & AEBSn in a "roaming" network. I suggest starting by performing either a "hard" or "factory default" reset on both.
    Next be sure that both the TC & AEBSn are on the same Ethernet subnet coming from the Verizon-supplied router.
    Configure the TC & AEBSn as follows:
    AirPort Utility > Select the TC or AEBSn > Manual Setup > AirPort > Wireless
    o Wireless Mode = Create a wireless network
    o Allow this network to be extended: <not checked>
    o Radio Mode: <leave the default or if you require a specific mode make sure both routers are configured the same>
    o Wireless Security: <configure both routers the same>
    AirPort Utility > Select the TC or AEBSn > Manual Setup > Internet > Internet Connection
    o Connection Sharing = Off (Bridge Mode)

  • Extend wireless network from Uverse/Motorola 1ZVDC via Airport express

    After spending 2+ hours trying to extend son's network via A Express, can this be done straight from his uVerse Motorola 1ZVDC modem?  I can get the express to show up, but will not work/extend network, and doesn't show up in wireless menu; only in airport utility :-(
    Now I saw an old post which says express cannot expand network from non-apple modem.  Is this correct? I don't think he wants to pay for Extreme + express.  I am certain that, at my other residence, I am using an express directly paired to my uVerse.  Here, main residence, I have 3 paired with Extreme. 
    He had bought a cheap extender which has to be plugged into USB on computer (wouldn't this be the modem?).  I was positive the express would do the job.
    His setup: OS X.6.8
    Airport: 5.6.1
    uVerse Motorola: 1ZVDC
    Apple Express:one below
    What if I plug the express directly into the modem?  Of course, probably won't extend network, which is my objective.
    If I give him my old extreme, what are advantages to new one?
    TY for your help.
    Ruth

    You cannot use extend to other brands.. it is apple proprietary method of repeater.
    What if I plug the express directly into the modem?  Of course, probably won't extend network, which is my objective.
    You can always plug in by ethernet and setup the express to create a wireless network with the same name and same credentials as the existing wireless.. this is called roaming network and is far superior to extend.
    If ethernet does not allow you to place the unit in the right place.. you can try EOP adapters. (homeplug in the US).
    If I give him my old extreme, what are advantages to new one?
    You can extend wireless by plugging the extreme into the main modem.. setup wireless to create a wireless network.. the Express can extend an apple wireless network.
    However please do understand the restrictions.. extend will halve the speed at best.. at worst it will be too slow to be usable. And the range can still be poor.. apple do not make wireless powerhouses.. they are average at best.
    He had bought a cheap extender which has to be plugged into USB on computer (wouldn't this be the modem?).  I was positive the express would do the job.
    If it is a universal extender it should work but needs to be located where the signal is still good.. USB is probably just for power.
    If the computer cannot pick up wireless signal then the extender cannot work either.

Maybe you are looking for