Expansion Card can't be read

Hey I've just bought a new tungsten E2 handheld device and bought with it a 2 GB expansion card, but the device can't seem to be able to read it. it's brand is kingston and it doesn't appear whatsoever in the card info.
Can you help me plz
thanks
Post relates to: Tungsten E2

The maximum size card the E2 can accept is 1GB. The 2GB will not work.
Here is a link to the Palm webpage for the card sizes.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=34080
Here is a link to the Palm knowledge library. Here you can select your device and do a search for articles regarding your particular question.
http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB
Here is a link to the support webpage for your device.
http://www.palm.com/us/support/tungstene2/
Post relates to: Palm i705

Similar Messages

HT4101 can you tell me why my 64gb sanddisk card can not be read by my ipad ?

can you tell me why my 64gb sanddisk card can not be read by my ipad ?

I assume that it's an SD card of some sort ? If it's an SDXC card then how is it formatted - from the page that you posted from :
Here are the supported SD cards and image-transfer protocols:
Picture Transfer Protocol (PTP)
Mass Storage Device protocol
SDSC
SDHC
miniSD
microSD
MMC
SDXC (supported only when not formatted as ExFAT)
If it's not formatted as ExFAT then how did the photos get onto the card ? If you copied them onto it yourself then you need to create a DCIM directory off the root of the card, with the photos underneath it, and the photo filenames need to be exactly 8 characters long (no spaces) plus the file extension i.e. in a similar format as if a camera had created/written them

SD card can not be read in windows???

Hi, I am having problem with the SD card can not be read at all, nothing pop up when put in the SD card. iam using windows 7, bootcamp 4.0 on a mac pro. Anyone got a solution?

Your question will be answered better in the right forum: Boot Camp

Expansion Card ??? Will Palm send a fix to encrease to 2MB????

Isn't it time for palm to send a fix so that 2MB expansion cards can be used. Is there a fix by another company?
Ed
Post relates to: Tungsten E2
This question was solved.
View Solution.

You can purchase a driver that will add SD HC capacity to your E2 if desired.
Palm will not rectify this problem.
http://www.palmpowerups.com/readarticle.php?article_id=11
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Hi, anyone can help me? I can't activated my ip4 after restored n updated and it's showed activation server is temporarily unavailable and the device can't read my SIM card,can someone please help me....thanks

Hi, anyone can help me? I can't activated my ip4 after restored n updated and it's showed activation server is temporarily unavailable and the device can't read my SIM card,can someone please help me....thanks

It is 99% hacked/jailbroken iPhone to use a different carrier than intended. You have to put the sim from the original carrier or ask them to unlock the iPhone. We as well as Apple cannot help you with this.

TS1292 i can not read my i tunes card,can someone help

i can not read my i tunes card,can someone help

If the page that you posted from doesn't help then you will need to try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

Can no longer read plist files

I've got a script that iterates through a list of hostnames, connects to each host, looks for the existence of a list of applications, and if they exist reads their Info.plist for the version. This worked seamlessly until a couple of days ago. The only change I can think of is having changed my username on all of my Macs from <username> to <username>.sa to differentiate privileged accounts from unprivileged accounts. Yes, this caused a number of issues, and I've hunted them down. I can connect to every host with <username>.sa, perform actions with sudo, etc. What I can't do any more is read plist files, even when logged in locally:
quad:~ username.sa$ defaults read /Applications/Utilities/Adobe\ Flash\ Player\ Install\ Manager.app/Contents/Info.plist
2014-06-26 15:03:59.588 defaults[49157:507]
Domain /Applications/Utilities/Adobe Flash Player Install Manager.app/Contents/Info.plist does not exist
quad:~ username.sa$ ls -l /Applications/Utilities/Adobe\ Flash\ Player\ Install\ Manager.app/Contents/Info.plist
-rw-r--r-- 1 root wheel 1344 May 28 12:02 /Applications/Utilities/Adobe Flash Player Install Manager.app/Contents/Info.plist
quad:~ username.sa$ cat /Applications/Utilities/Adobe\ Flash\ Player\ Install\ Manager.app/Contents/Info.plist
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>BuildMachineOSBuild</key>
<string>12E55</string>
<key>CFBundleDevelopmentRegion</key>
<string>English</string>
<key>CFBundleExecutable</key>
<string>Adobe Flash Player Install Manager</string>
<key>CFBundleIconFile</key>
<string>FlashPlayerInstaller.icns</string>
<key>CFBundleIdentifier</key>
<string>com.adobe.flashplayer.installmanager</string>
<key>CFBundleInfoDictionaryVersion</key>
<string>6.0</string>
<key>CFBundleName</key>
<string>Adobe Flash Player Install Manager</string>
<key>CFBundlePackageType</key>
<string>APPL</string>
<key>CFBundleSignature</key>
<string>????</string>
<key>CFBundleVersion</key>
<string>14.0.0.125</string>
<key>DTCompiler</key>
<string>com.apple.compilers.llvm.clang.1_0</string>
<key>DTPlatformBuild</key>
<string>4H1503</string>
<key>DTPlatformVersion</key>
<string>GM</string>
<key>DTSDKBuild</key>
<string>10K549</string>
<key>DTSDKName</key>
<string>macosx10.6</string>
<key>DTXcode</key>
<string>0463</string>
<key>DTXcodeBuild</key>
<string>4H1503</string>
<key>NSMainNibFile</key>
<string>FPIMMain</string>
<key>NSPrincipalClass</key>
<string>NSApplication</string>
</dict>
</plist>
The file is there. It is readable. I can read it... just not with the 'defaults' command. This is with all plists on all of my Macs.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

The Finder can't complete the operation because some data can't be read or written. (Error code -36)

Since the upgrade to 10.9 I have the most annoying issue when copying files. I have a secondary drive for media in which I keeo my media on / Samples / Video etc. I keep an exact copy on 2 external drives.
95% I can't copy the the new media across my drives without a few restarts. I get the following:
The Finder can’t complete the operation because some data can’t be read or written.
(Error code -36)
This is not a permissions issue. I've checked every folder down the the exact file it calls on. Everyone has READ & WRITE. If I restart the computer after getting this message it will do a little bit more then get stuck on another folder or file and pop the message.
If I do smaller chuncks, it seems to do better but not all the time.
PLEASE someone, tell me you have seen this before and you have a workaround. This is killing me,
All HD are OS Extended Journaled - No FAT
MacBook Pro I7
16GB RAM
250SSD
450SSD
2TD Lacie FW800 External
is the equation right now
thanks in advance for any help

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Expansion Card for Palm 5

Hi someone gave me a palm 5 but I need to know how I can get an expansion card and where. thanks
Post relates to: Palm V

The Palm V doesn't have a card slot..
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Expansion Card

I received a new Zire 31 as a gift recently and realized my expansion card from my old Tungsten E, although it fits in the slot, does not work. How can I listen to my songs again? Thanks for your advice.

What size is the SD card? The Zire 31 is too old (2004) to recognize any of the larger SD cards currently available formatted with FAT32. It will only recognize cards formatted with FAT16, and limits the card to 1G I believe if my memory serves correctly. Remember when this device was being sold the largest SD cards generally available were 512M.
The other question is do you have a media player on this device to play audio files?

Max Expansion card size for treo palm 700wx

I can't seem to find the max expansion card size for a treo palm 700wx. I purchased a 4gb Scan Disk which should be compatible with most ever device so expect that the hardware dosen't support up to 4gb. If anyone has futher information on this I would appriciate it.
Post relates to: Treo 700wx (Verizon)

that I have used with no problem is a Transcend 150X Secure Digital Card 4GB. My pictures and tunes along with backups reside on it. Had it for a year. In use 2200.03MB with 1718.30MB free currently.
Post relates to: Treo 700wx (Verizon)

KT4 Ultra: conflict w/ expansion cards

This is my first post, so please be gentle. I recently built new PC for photo editing and want to keep this old KT4 Ultra computer for general usage right beside. Both are running Windows XP Home SP3.
My KT4 computer had HDD crash and after replacement and fresh istallation of XP I initially had following expansion cards inside:
USB Expansion card (w/ 4 USB ports) on Slot 2 (INT B#)
Realtek RTL8139 Family PCI Fast Ethernet NIC on Slot 3 (INT D#)
Terratec EWX 24/96 Sound Card on Slot 6 (INT C#)
Everything was OK until I wanted a LAN connection for sharing of files (mostly) and Internet (via cable modem) between these two. Instead of a broadband wired router I opted for a Gigabit Ethernet card installing it on slot 5 (INT B#).
USB Expansion card (w/ 4 USB ports) on Slot 2 (INT B#)
Realtek RTL8139 Family PCI Fast Ethernet NIC on Slot 3 (INT D#)
D-Link DGE-528T Gigabit Ethernet Adapter on Slot 5 (INT B#)
Terratec EWX 24/96 Sound Card on Slot 6 (INT C#)
Somehow didn't want to have it on slot 1, so close to video card. Unfortunately after this the sound card was dropped by the system, a yellow question mark in Device Manager.
Further I failed to instal my Bluetooth Dongle which I earlier had used succesfully for communication to my mobile phone. Now my Broadcom USB Bluetooth Device is put under Unknown in Device Manager.
I did experience problems with the sound card several years ago in this very same PC. That time I knew little about system and BIOS setting and had to use another PC for audio purposes (digitalizing of tapes and vinyl).
As reference I used the PCI Interrup Request Routing table, found on page 2-32 in KT4's manual. Funny thing is that Sandra XI tells now that my two Ethernet cards having both INT pin A# while by their slots they should be B# and D#. I don't have true understanding what this means though. In BIOS the PNP/PCI Configurations has all slot IRQs on Auto.
Is this conflict easily cured by re-positioning card(s) on other slot(s) or addressing IRQ settings manually, and if so how and in which order? Or should I remove all the cards and install them in certain order...?
I'm quite exhausted as I had some component issues with my new PC and now this KT4 once again rejects my sound card. Maybe I'm better off by installing it on my new PC, but then this failure with Bluetooth dongle, (which I put on the USB port of KT4, not on the USB exp. card.) Oh my, why can't sound card and ethernet card live together!?!
I would appreciate your help very highly.

Hope you get things like you want them!
Eh, made this in 2003, but I'm not sure if it isn't more confusing than anything else:
"The use and sharing of IRQs aren't mentioned in my MSI manual, (due to the APIC function I think), so I had to go to some ASUS manuals. As standards are standards, I believe things can't be to different. If someone has any addings or suggestions please come forward, so I can adjust the table.
*Please note that this is generally speaking and mainly for ASUS boards a few years old!
**Please note that you should not have any sharing with the IDE controller or similar!
***Please note that it is a good thing to have expansion PCI sound cards in slot 3!
****Please note that surprisingly enough it looks like PCI slot 2 would be free for any device, but AGP cards get hot and bigger so it is not a great idea.
IRQ sharing table
PCI 1 shares with PCI slot 5
2 shares with AGP and PCI slot 6, or sometimes with onboard IDE
3 shares not, or sometimes with onboard audio/modem
4 shares with onboard LAN
5 shares PCI slot 1
6 shares with AGP and PCI slot 5
AGP slot shares with PCI slots 5 and 6
USB 1 shares with USB 2, 3 and USB 2.0
2 shares with USB 1, 3 and USB 2.0
3 shares with USB 1, 2 and USB 2.0
USB 2.0 shares with USB 1, 2, and 3
Onboard audio/modemshares not, or sometimes with slot 3
Onboard LAN shares with PCI slot 4
Onboard IDE shares not, or sometimes with PCI slot 2 "
Normally it is best to let Windows or whatever OS you run do the job. Setting IRQ:s yourself is a (too) big assignment.

Stupid Expansion Card question

I bought a 1g expansion card and put it in my Centro, but now I am not able to get it out. Can someone please tell me how to get the thing back out so I can add some mp3's to it?
Post relates to: Centro (Sprint)

Hello and thank you for using the Palm Help Forums!
You should be able to push it back in and it will pop out. It's spring loaded. So went you insert it it stays, then when you push it in again it pops out. If it's still not coming out, ummm... ummm... that's tough. Did you put it in the wrong way??
Post relates to: Treo 800w (Sprint)

Z87 XPower PCI_E2, Single Graphics Card plus Other Expansion Cards

A bit confused on the PCI-E expansion slots...
I seem to have read somewhere that it is preferential to place a single graphics card in PCI_E2 slot. Found a reference on a review:
"However for those using a single graphics card MSI recommends installing it in the second PCIe slot as this slot is connected directly to the CPU, meaning there is no latency lag as it bypasses the PEX 8747 chip"
However, the PCIe x16 Slots Bandwidth Table clearly shows only one "video card" (any other pci-e expansion card, too?) is possible when taking advantage of PCI_E2:
E1 E2 E3 E5 E7
Single: 0 x16 0 0 0
2-Way: x16 0 0 x16 0
3-Way: x8 0 x8 x16 0
4-Way: x8 0 x8 x8 x8
I picked up a pci-e OCZ RevoDrive 3 x2 SSD 240GB and looking to use a N770 graphics card in PCI_E2... is this even possible? Ideally, I would choose to run the RevoDrive from PCI_E1.
From reading the table, I get "no".
I called MSI support, and 2 agents seemed to believe the PCIe x16 Slots Bandwidth Table only related to graphics cards ("The table below shows the correlation between the PCIe slots bandwidth and multiple
graphics cards."). Still waiting an official response to ticket(s). I spoke with the first before I began my graphic card installation, and the second after I installed and couldn't get the RevoDrive to show in any slot when the graphic card was installed in PCI_E2.
My experience is telling me I have a problem, and I have some decisions to make moving forward. Generally speaking:
1. Is it possible to install a single graphics card in PCI_E2 to bypass the PEX 8747 chip and achieve x16 bandwidth, and still have another pci-e in another x8/x16 slot?
2. What is more important for the video card: x16 bandwidth, or "latency lag as it bypasses the PEX 8747 chip"?
3. The performance of the RevoDrive is outstanding (knock on wood... hoping I can keep this card running a long time considering the volume of drive failures experience with OCZ drives). I am considering my overall day-to-day usage and wondering if I might be better off ditching the RevoDrive or the graphic card... or (oh my, GOD!) another board....
It is easy for me to criticize engineering for overlooking this potential design consideration, yet it is an outstanding board. I should have been more aware when I read the 0-16-0-0-0 config details on the PCIe x16 Slots Bandwidth Table and the detail on the PEX 8747 chip. Once of the major items that attracted me to the XPower was the heap of features and pci-e expandability. Yet, all the PCI-E bandwidth and slots don't do me any justice if I can't config my install to optimize my system's components.
I would have a hard time trying to pick another to even try to replace the Z87 XPower (it would have to be Asus Z87-DELUXE).
What would I lose or gain in keeping the RevoDrive vs the graphic card? I initially began building this system around the RevoDrive, and I can't imagine wanting to keep the system without it.
4. What am I sacrificing/gaining in having the graphic card in PCI_E1 and the RevoDrive in PCI_E5?
5. With two different x16 pci-e components installed, and only one of them a graphic card, does the PEX 8747 chip latency become a non-issue? Is it still preferential to keep the graphic card in PCI_E2 position?
PSU: Corsair AX1200i
CPU: i7-4770k
MOBO: Z87 XPower
VGA: MSI GTX N770 Lightning 2GB
SSD: RevoDrive 3 x2 240GB
RAM: Generic 1333 (special ordered Corsair Dominator 2400MHz)
Thanks for any additional insight and clarity!

1: connecting a single card in PCI_E2 will bypass the PLX8747 but if you use one of the other slots for something it will start to use the PLX chips again to duplicate lanes!
2: PCI-E lanes are of very little importance as you will only see a .1 to 2FPS reduction in frame rate between x16 and x8. and less lag is similar in that regard too and will have very little noticeable difference!
3: it should make very little difference to either component and changing board makes in the z87 family lines would make very little difference too as to get higher expandability you need that PLX chip to sub divide the lanes and create a extra 16 fake lanes to allow more then 2 way SLI or 3 way Crossfire on the Z87 boards as the CPU's only have 16 lanes total!
4: not much! about a hundred nanoseconds of lag, maybe 1MBP/s less on the revo drive and .1 to 2 FPS less on the Graphics card...
5: no you would need them in the E1 and E5 positions and using the PLX chips as you will have problems and both may go into x8 using only the CPU's 16 lanes total if the Graphics card is in E2 or the revo drive may not function at all as the graphics card may hog all the PCI-E lanes....

Expansion Cards any particular order¿ KT4V

Im trying to pinpoint why my system hangs once ina while,, I have a hunch its the order of my expansion cards,, heres my current setup
Starting with AGP
AGP slot Asylum 256mb GeForce 5200 nvidia chipset "primary monitor"
1st PCI PCTV Card Pinnacle systems
2nd PCI Silicon Image Sil680 ATA/133 "primary channel=storage hard drive mostly multimedia content" "secondary channel=dvd-rom drive"
3rd Voodoo3 3dfx graphics card "secondary monitor"
4th Sound Blaster pci 128 sound card
5th Creative Modem Blaster V.92 DI5631
6th OHCI compliant IEEE 1394 FireWire Pinnacle systems
I dont know for sure but I am quessing I can put my expansion cards in a better sequence on the PCI bus, on my old mainboard I know I had a different order than I do now but I didn't pay attention when I pulled the cards was excited to get MSI mainboard setup,, I know the the 1st and 6th pci slots share ther same IRQs thats why I used the PCTV card 1st it is IRQ shared compatible, only when you are viewing TV not Capturing, so I felt that I would never capture from TV card and Firewire "on 6th PCI slot" at the same time,,, My main concern "or question" I have is the Sil680 PCI ATA/133, it should be placed accordingly so it doesn't ever hang up or conflict with the other expansion cards,, when my system hangs its always when it accesses one HD to the Other ,, main HD on primary channel mainboard and 2nd HD on primary channel Sil680 ,, this might not be my problem but any information on this would be greatly appreciated, I am trying to gain a better understanding of the PCI bus and card placement order, besides the IRQs So I can continue with my process of elimination and eventually solve my problem,, Thank You For Your Time In Reading This,,,,
Greatly Appreciated
~/\/\ike¥²

This Is my IRQ table from SiSoftware Sandra 2004 I think this is what you were asking for,
0 = System Timer
1 = Standard 101/102 keyboard
2 = Programmable interrupt controller
3 = COM2
4 = COM1
5 = COM4
6 = Standard Floppy Dsk COntroller
7 = ECP Printer port LPT1
8 = Sys CMOS real time clock
9 = IRQ holder PCI steering
9 = SoundBlaster PCI
9 = VIA PCI to USB enhanced host controller
10 = 3dfx voodoo3
10 = Creative PCI modem enumerator
10 = IRQ holder for PCI Steering
10 = IRQ holder for PCI Steering
10 = Primary Sil Ultra DMA Bus Master IDE Controller
10 = Sil PCI-0680 Ultra DMA IDE Controller
10 = OHCI Compliant IEEE 1394 host controller
10 = VIA Tech 3038 PCI to USB Universal Host COntroller
10 = VIA Tech 3038 PCI to USB Universal Host COntroller
11 = IRQ Holder for PCI Steering
11 = NVIDIA GeForce FX 5200
11 = Studio PCTV
11 = Studio PCTV (Audio)
11 = VIA Tech 3038 PCI to USB Universal Host Controller
12 = Microsoft PS/2 Mouse intellipoint
13 = Numeric data processor
14 = Primary IDE controller (dual fifo)
14 = VIA Bus Master PCI IDE Controller
15 = Secondary IDE controller (dual fifo)
15 = VIA Bus Master PCI IDE Controller
I am self taught on every aspect of my computer so I have a "grasp" of how and what IRQs are, but I am a spong to learn and am anxious to determine and correctly set up PCI bus and IRQs so I may better understand... so thank you very much for your time and help it is greatly appreciated!!

Expansion Card can't be read

Similar Messages

Maybe you are looking for