Expansion Card USB 3.0 for Kinect for Windows?

I have bought the Kinect v2 Sensor for Windows and XBOX One + Adapter to try and program them on the PC. Everytime I connect them to the PC, the Kinect v2 Configuration Verifier shows me a warning that the USB Controller detected is supported but with
unknown bandwidth. It may or may not be compatible with my hardware.
Does anyone have any experience in regards to the USB Controller? I have also done all the Windows Update and now very confused because the Kinect won't deliver streams now.
Note: I have read this https://social.msdn.microsoft.com/Forums/de-DE/bb379e8b-4258-40d6-92e4-56dd95d7b0bb/confirmed-list-of-usb-30-pcie-cardslaptopsconfigurations-which-work-for-kinect-v2-during?forum=kinectv2sdk and bought and installed the Transcend
PDU3, but it also shows me the same error message. Help is very much needed.
Specs:
Motherboard: Asus h81m-d plus
OS: Windows 8.1 Pro 64 bit
RAM: 16 GB
Processor: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
Graphics Processor: DirectX 11 capable

There are no lights that appear on the sensor by just being plugged in. You will see an orange/white light on the adapter(white is a connected to pc indication). In device manager, do you see the Kinect driver loaded? Did you follow the steps in the trouble
shooting guide and tried all available PCI Express slots?
https://social.msdn.microsoft.com/Forums/en-US/20dbadae-dcee-406a-b66f-a182d76cea3b/troubleshooting-and-common-issues-guide?forum=kinectv2sdk
Carmine Sirignano - MSFT

Similar Messages

  • Support phone number or chat for Kinect for Windows v2? 3D Builder won't work

    I have a Dell Inspiron 5000, Xbox One Kinect and adapter for use of the Kinect sensor with a Windows PC.  The sensor works fine or as well as can be expected on the Xbox One.  I've tried using it with 3D Builder which is the first app that Microsoft
    offers for the Kinect with PC after connecting it and downloading the drivers.  Unfortunately, it says that my rate is too slow so I was looking for support to see if this is an Inspiron issue or not.  The USB 3.0 ports may or may not support the
    bandwidth but I can't really tell.
    Does anyone know if there is a support number or chat area for Kinect for Windows as I keep getting transferred to the Xbox group and no one there seems to know anything about Kinect for Windows?  I'll also settle for if anyone can tell me if there
    is a problem with that application or the Dell Inspiron 5000.
    Thanks,
    Reinaldo

    The technology 3D builder is using requires a very specialized graphics card to be able to work at full speed. Laptop systems typically only can achieve the very minimal amount of processing which will work but very slowly.
    If you have a desktop system with an NVidia GeForce GT 670 or other in the same processing class of GPU's you should be able to achieve 30fps. Otherwise with lower end or laptop based systems even the highest end Alienware we have seen ~27fps. My experiences
    have been typically anywhere from ~1-8fps with Intel Based on-board gpu's(4000 series), ~15-22fps with mobile NVidia GT 750M chipsets and 23-30fps with GeForce GT 760 desktop system.
    Carmine Sirignano - MSFT

  • Which PC is recommended by Microsoft that ACTUALLY meet the requirements to work with software development for kinect for windows?

    My PC serves the minimum requirements described in the kinect page, but when installing the device, the software says that the computer does not meet the minimum requirements and therefore will not work with efficiency. Alternatively, theorize buy a new
    computer.
    Which PC is recommended by Microsoft that ACTUALLY meet the requirements to work with software development for kinect for windows?

    Getting a definitive answer from Microsoft will be difficult as to my understanding, requirements are still subject to change; and unless it's their brand of PC  I doubt they will give free advertisement to buy a specific make/model.
    There are other threads where people discuss specific machines that work with the Kinect V2.  
    The only compatibility problems I've had with getting it to work are: It has to be run Windows 8; It has to have a compatible USB 3.0;  The 'Compatible' USB 3.0 requirement seems to be the most difficult.

  • Private forum for kinect for windows developer preview

    Hello all,
    I received notification email from Microsoft regarding Kinect for Windows developer preview. In the beginning of the content, it is written:
    "Until the program agreement is signed you cannot get access to the pre-release sensor, the SDK and documentation, or the private forum. Please check your junk or span folder. If you still are not able to locate the Docusign agreement please let us
    know and we will resend it to you."
    After checking my junk folder, I could not find any, so I replied the email asking to resend the document, I got email response suggesting me to use technical support in the private forum for 'Kinect for Windows developer preview'. But if I clicked the link,
    I got message "no results were found". I think I still don't have access to the private forum.
    I appreciate any suggestion.
    Thank you in advance.

    Kinect forums are over here.
    http://social.msdn.microsoft.com/Forums/en-US/home?category=kinectsdk
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Where can I download example projects for Kinect for Windows v2?

    so for a project I am working on regarding the Kinect v2 I had initially planned on using Matlab to code for the Kinect. However, the code on the Mathworks website regarding the Kinect seems to only work with the Kinect v1 and I cannot figure out how to
    get the v2 to work with Matlab. Now I am in the predicament that I need to use Visual Studio and have never done so before. To make matters worse, all of the guides I can find about programming for the Kinect assume you are very familiar with Visual Studio
    so I get lost before I can even get through the setup (I have no idea what kind of project is best for Kinect, though I intend to use C# as my programming language, or where these settings they are changing are located). If I could just find an example project
    file to download I feel like it would help me a lot, but I cannot seem to find one.
    So my question is thus, is there a place where we can download project files for Visual Studio? I really just need to see what one looks like and what kind of settings it runs on so I know where to get started. It would be awesome if the project file involved
    overlaying the skeletal model on top of people in real time as well.
    If this is not possible, even a video that explains in depth how to go about using visual studio and the Kinect at the same time would be greatly appreciate, or a workaround to get Matlab to work with the Kinect v2.

    Hi Jicnon,
    When you download and install the Kinect SDK, it comes with the Kinect SDK Browser application. This applicaiton is a web based application that contains a bunch of sample projects for getting started with Kinect for windows programming.
    There is also the jumpstart videos here:
    https://social.msdn.microsoft.com/Forums/en-US/8428671a-781c-4850-a56d-905ab28f8f8f/mva-jump-start-programming-kinect-for-windows-v2-videos?forum=kinectv2sdk
    To get to the SDK Browswer app just hit the windows button type in "Kinect SDK" and this application should appear.
    There are also some samples in Kinect Common Bridge and a dicussion on using Matlab here:
    https://social.msdn.microsoft.com/Forums/en-US/2aa59712-c2ab-48e2-98bd-5eed9a40ec44/matlab-link?forum=kinectv2sdk
    Sr. Enterprise Architect | Trainer | Consultant | MCT | MCSD | MCPD | SharePoint TS | MS Virtual TS |Windows 8 App Store Developer | Linux Gentoo Geek | Raspberry Pi Owner | Micro .Net Developer | Kinect For Windows Device Developer |blog: http://dgoins.wordpress.com

  • I want to read the values of the inside accelerometer on Kinect for Windows v2 sensor.

    I had used the inside accelorometer on Kinect for Windows v1. So I want to use it for Kinect for Windows v2 application. However I can't find any function or method on Kinect for Windows SDK v2.0. But it is near the Ir camera of K4W v2. I found the Kionix
    chip. Do you have any plan to access this chip? 

    I just went through the slides of "Programming Kinect for Windows v2 Jump Start" of the MS Virtual Academy, and in slide #11 of slide deck #07 (Advanced Topics: Skeletal Tracking and Depth Filtering,
    http://www.microsoftvirtualacademy.com/training-courses/programming-kinect-for-windows-v2-jump-start), it says:
    Align the y-axis to gravity
    –Tilt correct with
    FloorClipPlane.xyz
    •Falls back to accelerometer when no floor is found
    •Rotate
    scene such that “up” is (0,1,0)
    So, just to make sure I understand, you are saying that the information provided in the slide deck (and in the video) is erroneous and we cannot access the accelerometer info?    

  • Download a Project file for Visual Studio regarding the Kinect for Windows v2? Getting Started with Kinect Development in Visual Studio

    I am currently trying to make an application for Kinect for Windows v2 but I am entirely new to Visual Studio and Kinect development and could use some help getting started. I honestly have no idea where or how to start and I figured the easiest thing would
    be to obtain a simple project file and examine how it works myself, but I have been unable to find one. The easiest thing would be if I could obtain a project file for Visual Studio that is an application which overlays the Skeletal model over people in real
    time, though similar project files would also be appreciated. The app I am making largely involves things similar to overlaying the skeletal model on bodies so this would get me off to a great start and show me how the code is laid out within visual studio
    simultaneously. (I would prefer the code to be in C# if that is possible but other languages also work).
    I have checked out some of the guides for kinect development but they all assume you know how visual studio works so I cannot get very far in them. Thus if you know of a good guide to get me started with visual stuido AND the Kinect then I would be glad
    to here that as well.
    Alternatively, and I know this is not the right place for this, I have Matlab, which I know works for the Kinect v1 but can't find support for it regarding the v2, so if you could point me in the right direction on how to get it to work with the Kinect v2
    THAT would also work incredibly well as I am much more familiar with Matlab.
    I already have Visual Studio Ultimate 2013 installed, as well as the Kinect SDKv2.0, the physical Kinect for Windows v2, and my laptop meets all of the requirements for development so those are not issues.
    Thanks in advance for any advice you can give me!

    Hi Jicnon,
    Thank you for posting in MSND forum.
    Since this forum is discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor. About your issue, I think that it is
    more related to the Kinect for Windows v2, so I suggest you can post this issue directly to Kinect for Windows v2 SDK forum:https://social.msdn.microsoft.com/Forums/en-US/home?forum=kinectv2sdk
    ,maybe you will get better support.
    In addition, I find a similar thread about your issue, maybe you will get some useful message.
    https://social.msdn.microsoft.com/Forums/en-US/92b23946-53d2-419c-8624-66e6c390617f/information-to-start-project-with-kinect-for-windows-v2?forum=kinectv2sdk
    Thanks for your understanding.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Kinect for Windows v2 vs Kinect for Xbox One

    I have found the official page (http://www.microsoft.com/en-us/kinectforwindows/meetkinect/features.aspx) that
    describes the hardware specifications for Kinect
    for Windows v2. But I cannot seem to find the hardware specification for Kinect
    for Xbox One. I just want to know if there is any difference in hardware specification between these two devices
    and if there are features, that are supported by the SDK 2.0 only for specific version?

    Actually there is one slight difference with IR, as found here:
    http://channel9.msdn.com/coding4fun/kinect/Determining-Kinect-Capabilities-at-Runtime
    Sr. Enterprise Architect | Trainer | Consultant | MCT | MCSD | MCPD | SharePoint TS | MS Virtual TS |Windows 8 App Store Developer | Linux Gentoo Geek | Raspberry Pi Owner | Micro .Net Developer | Kinect For Windows Device Developer |blog: http://dgoins.wordpress.com

  • USB Port Expansion Card for SDXC Slot?

    Are there any? I've seen plenty of 4-port USB PMCIA expansion cards... they're not compatible though, are they?
    TIA

    Not for the SD card slot. That's really a very limited, single-purpose device, not adaptable to the great variety of devices that PCMCIA or ExpressCard slots can serve.

  • AsRock Extreme9 X79 + Kinect for Windows V.2 + 3D Builder App: USB 3.0 Issue !

    Hello everyone!
    I have a tremendous problem!
    I recently bought a "Kinect for Windows V.2".
    I suspected it was broken, so, I sent it to the Microsoft XBOX
    replacement
    Support Centre in Germany and they have replaced it with a new one.
    Therefore, the problem persists!
    The Problem:
    - I connect the Kinect 2 to my PC with Motherboard AsRock X79 Extreme9, and the USB 3.0 controller Texas Instruments
    crash with Error 43! (Not supported)
    So, now I have bought on Amazon a "Targus TS-DPU3" external USB 3.0 Hub, that was confirmed that run with Kinect 2.
    I hope it will work correctly, with sufficient bandwidth by connecting it to the onboard USB 3.0 port !
    (USB 3.0 Texas Instruments + USB 3.0 Targus External Hub (compatible with Kinect 2)= 5Gb/s)
    -Somebody have another suggestion for the compatibility between my "AsRock
    Extreme9
    X79" + "USB 3.0" + "Kinect 2" ???
    Please help me!
    Thank you very much!

    As you are aware, TI USB3 host controllers/chipset is not supported. Only Intel and Renesas are supported given the testing that was done at time of release. Plugging the hub into that is not going to work, since you have not corrected the
    internal issue.
    You need to purchase a PCI Express Gen 2.0 USB3 expansion card that will plug into a PCI Express slot that is Gen 2.0 enabled.
    Carmine Sirignano - MSFT

  • Asus IPIBL-LB expansion card for usb3.0?

    I am trying to upgrade my aging HP a6152n PC once again. I would like to increase USB throughput by upgrading to USB3.0.
    I have windows 7 64 pro installed3 hard drives and have recently purchassed a external WD 4 TB mkybook to use as a backup. It works on the USB 2.0 port but it has the capability to run on USB 3.0. I would like to take advantage of the much higher throughput of the USB 3.0 if I can find a card  and driver that will work on my system.I tried a 4 port expansion card from Inateck but could not get it to work.   Windows device manager indicated Code 10 " This Device cannot Start"
    Any Suggestiions or advice.   Thanks  wyuhasse

    Wyuhasse, welcome to the forum.
    Here is a card that says it is compatible with Win 7 32/64-bit.  There is a "Built-in 4-pin power connector for receiving extra power supply from system".  You should be certain to connect it.  Read the Customer Reviews to see what users have to say about it.
    I suggest checking your Inateck card to see if it has the extra power connector.  If it does and it is not connected, this could be the reason for it not working properly.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Best slot for new PCIe FW-expansion card

    Hi there,
    I just upgraded my PM Quad with a NVIDIA 7800 GTX 512 card which occupies PCIe slots 1 and 2.
    Now I will have to install a FW 400/800 expansion card for operation of an external audio interface. I know that slot 3 would probably offer the best performance for the next card to be installed (8-lane)- but is likely to obstruct proper air circulation for the fan of my graphics card.
    So slot 4 (4-lane) would be the only alternative. I cannot judge if this would be sufficient for proper audio performance.
    So, any comments from the audience?
    Regards,
    Oliver
    PPC mini, PM Quad 4,5 GB RAM   Mac OS X (10.4.7)  

    Great - glad to hear that.
    Just inserted my card into slot 4 - real plug 'n play - smooth operation - no complaints so far!
    O.

  • Max Expansion card size for treo palm 700wx

    I can't seem to find the max expansion card size for a treo palm 700wx. I purchased a 4gb Scan Disk which should be compatible with most ever device so expect that the hardware dosen't support up to 4gb. If anyone has futher information on this I would appriciate it.
    Post relates to: Treo 700wx (Verizon)

    that I have used with no problem is a Transcend 150X Secure Digital Card 4GB.  My pictures and tunes along with backups reside on it.  Had it for a year. In use 2200.03MB with 1718.30MB free currently.
    Post relates to: Treo 700wx (Verizon)

  • Kinect for Windows V2 looses the USB connection

    Hi,
    My PC is running windows 8.1 with USB 3 port. Kinect is connected 24/7 and if I did not use the Kinect for 1day, it appears pc has lost the connection to Kinect. Unplugging and plugging the usb connection does not do bring the connection back but if I power
    off and on the Kinect , then it can be seen by the PC.
    How can I fix this problem?
    best Regards
    Johan

    Try a different device to see if it is an issue with the sensor itself. We have many sensors working in the 24x7 scenario so check to ensure the KinectMonitor/KinectService are running when connecting the sensor. When connecting the sensor to the machine,
    is the driver correctly loading? What does device manager show for under Kinect sensor devices entry?
    Carmine Sirignano - MSFT

  • NI DAQ card/USB for Polytec OFV 2700

    Any ideas on whcih NI digital acquisition card/USB will work for a laser vibrometer, Polytec GmbH OFV 302 Sensor Head controlled by a POLYTEC OFV 2700 ULTRASONICS VIBROMETER CONTROLLER?

    Hi there
    1. Take a look at the data sheet of the controller to find the maximum voltage range and the maximum signal rate  
    2. Go to the NI Hardware selector http://sine.ni.com/nifn/cds/view/main/p/lang/en/nid/1036/ap/daq
    These are the hits for
    - Voltage acquisition at 100kS/s, 16Bit, USB
    http://sine.ni.com/nifn/cds/view/main/p/sn/n1:7690,n13:7374,n2:7563,n21:41,n24:USB,n36:19/lang/en/ni...
    3. Select the hit that adapts to the requirements from the data sheet.
    Best regards
    chris
    CL(A)Dly bending G-Force with LabVIEW
    famous last words: "oh my god, it is full of stars!"

Maybe you are looking for