EXPDB & IMPDP db version reqs

Hi friendz,
I read the impdp&expdp docs.
But it did not say there about database version dependencies.
For example, if an output of 10g Db expdp can be imported to 11g Db and vice versa.
Any idea?
Thanks

for a quick answer -
you can always import an older dumpfile into a database with the same or greater compatibility setting
you can never import a newer dumpfile into a database with a lower compatibility setting.
If you export from a database with a version of 11.2.0.1 and the compatibility setting is 10.2, the dumpfile being generated is compatible to 10.2 This dumpfile can be import into anything with a compatibility setting of 10.2 or higher, but can't be imported into a database whose compatibility setting is less than 10.2.
Hope this clears things up a bit.
Thanks
Dean

Similar Messages

JDK Version req for OIM 9.1.0.1 Installation

Hi,
As per Oracle's documentation, we need to use JDK 1_4_2_15 for Oracle Identity Manager 9.1.0.1. Installation. In my machine when I checked Java Version it shows jdk 1.5_0_06. Is there any problem if I go with the default jdk version or I have to change it to 1.4.2_15. Please advise.
Regards,
CC

This is given in docs:
C:\>java -version
java version "1.5.0_06"
http://download.oracle.com/docs/cd/E14049_01/doc.9101/e14062/install_config_oc4j.htm#BGBJAAID

PortalTools portal version req. ?

I'm about to install and configure PortalTools.ear (9.0.2.6.1) from the latest JPDK on an instance of midtier running Portal 9.0.2.3B (Infrastructure running RDBMS 9.1.0.4)
The release notes state that the min. requirement of Portal is 9.0.2 but gives no info. on minor release. Does this latest version of PortalTools JPDK require the latest version of Portal 9.0.2.6 or will it function properly on 9.0.2.3B of Portal?
Thanks,
Laith E.H.

Hello Laith,
You do not need to have a 9.0.2.6 Portal to install the PDK and PortalTools version 9.0.2.6.1,
You can register and use PortalTools portlets into you 9.0.2.3 Portal.
Regards
Tugdual Grall

Impdp taking long time for only few MBs data...

Hi All,
I have one query related to impdp. I have one expdp file and size is 47M. When I restore this dmp using impdp it will take more time. Also initially table_data loaded finsih very fast but then later on alter function/procedure/view taking a lot time almost 4 to 5 hrs.
I have no idea why its taking long time... Earlier I can see one DB link is failed and it given error for "TNS name could not resolved" so I create DB link also before run impdp but the same result. Can any one suggest what could be the cause to taking long time for only 47MB data?
Note - Both expdp and impdp database version is 11.2.0.3.0. If I import the same dmp file into 11.2.0.1.0 then its done in few mins.
Thanks...

Also Read
Checklist For Slow Performance Of DataPump Export (expdp) And Import (impdp) [ID 453895.1]
DataPump Import (IMPDP) is Very Slow at Object/System/Role Grants, Default Roles [ID 1267951.1]

IMPDP failed with ORA-ORA-39029- DW DIED error....

Hi All,
We have a problem while refreshing the schema using expdp/impdp.
Version: 10.2.05
OS: HP-UNIX
Export got suceeded.
While importing we get the below error at some point and import got terminated.
ORA-39014: One or more workers have prematurely exited.
ORA-39029: worker 1 with process name "DW01" prematurely terminated
ORA-31672: Worker process DW01 died unexpectedly.
Job "SYS"."SYS_IMPORT_FULL_10" stopped due to fatal error at 20:30:18
Totally around 37000 tables, we spilt the tables as no. of parfiles/dumpfile and try importing also failed with same error, but not for all the tables for few tables it terminated with dw died error.
Can you please help me to understand why it terminated for few tables any work around/fix for this could be great.
Thanks.....
Riyas

Hi Abraham,
Thanks for your response...
I dont remap anything, also the import is not failed at all the tables only few tables.
Export dump size is around 35gb.
I paste you the logs with impdp statement which i tried.
impdp dumpfile=exp_10601_10700.dmp logfile=imp_10601_10700.log DIRECTORY=EXP_DUMP TABLE_EXISTS_ACTION=REPLACEImport: Release 10.2.0.5.0 - 64bit Production on Monday, 18 June, 2012 19:36:49
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Username: sys as sysdba
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYS"."SYS_IMPORT_FULL_10" successfully loaded/unloaded
Starting "SYS"."SYS_IMPORT_FULL_10": sys/******** AS SYSDBA dumpfile=exp_10601_10700.dmp logfile=imp_10601_10700.log DIRECTORY=EXP_DUMP TABLE_EXISTS_ACTION=REPLACE
Processing object type TABLE_EXPORT/TABLE/TABLE
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "RRS"."RAW_ITEM_VALUE" 12.25 GB 185886629 rows
. . imported "RRS"."RAW_ITEM_VALUE_BAK" 8.012 GB 124185377 rows
ORA-39014: One or more workers have prematurely exited.
ORA-39029: worker 1 with process name "DW01" prematurely terminated
ORA-31672: Worker process DW01 died unexpectedly.
Job "SYS"."SYS_IMPORT_FULL_10" stopped due to fatal error at 20:30:18
>

Using expdp and impdp instead of exp and imp

Hi All,
I am trying to use expdp and impdp instead of exp and imp.
I am facing few issues while using expdb. I have a Job which exports data from one DB server and then its imported so another DB server. Both DB servers are run on separate machines. Job runs on various clients machine and not on any of DB server.
For using expdp we have to create DIRECTORY and as I understand it has to be created on DB server. Problem here is Job can not access DB Server or files on DB server. Also dump file created is moved by Job to other machines based on requirement( Usually it goes to multiple DB server).
I need way to create dump files on server where job runs.
If I am not using expdp correctly please guide. I am new to expdp/impdp and imp/exp.
Regards,

Thanks for quick reply ..
Job executing expdb/impdp runs on Red Hat Enterprise Linux Server release 5.6 (Tikanga)
ORACLE server Release 11.2.0.2.0
Job can not access the ORACLE server as it does not have privileges (In fact there is no user / password to access ORACLE server machines). Creating dump on oracle server and moving is not an option for this JOB. It has to keep dump with itself.
Regards,

How to import DDL for multiple tables referencing each other?

Hello people,
I'm having a non-trivial problem. I need to copy a few tables from one machine to another, both 10g. Just DDL, data copying is not necessary. When I export the DDL to an SQL file using Oracle SQL Developer, the resulting file is refused at the import (again, SQL Developer). The problem is that every table references some other table(s), so every single "create table" command is refused, because the needed table is has not been created yet. What's the best solution to be applied here?
Maybe I can draw a parallel to adding packages in Debian. When you have two packages, A and B, and they depend on each other, you cannot install them using "dpkg -i A && dpkg -i B" nor the other way around. Both calls to the dpkg will fail, due to the missing respective package. However, installing them in one command ("dpkg -i A B") is the right way. This is EXACTLY what I'd love to do with Oracle. Tell it to wait a bit, to make sure that ALL of the necessary tables are specified, and then create them virtually at once. Can it be achieved with transaction management?
Thanks a lot for any help.

Use exp/imp or expdb / impdp
They will only enable constraints after all tables are imported.

Should I keep the type 1 driver?

I am an intern at FedEx, My project is to incorporate one of their databases on Microsoft Access with one of the Intranet website. The website should allow for a client to update the database, search for inquires, display recent inquires, ect... I used the sun.jdbc.odbc.JdbcOdbcDriver to do this. I have it working fine except that I have not implemented it on the network yet. However the purpose of the project is to update the database using different platforms and machines. Obviously once it is on the network, only a windows box will be able to update it, plus that database is limited to the functionality of the Microsoft driver. I guess my question is, will it be worth my time and effort to switch to a pure java driver or maybe even a type 3 without knowing much about the type 3 or 4 drivers. This means I would have to switch databases also. The current database is around 500 inquires. I am a CS major with an emphasis in java, I have never written any programs using JDBC before this one. It took me around a week to write this after reading up on JDBC. If so, any suggestions on what database and driver to switch to. If not, is their any thing that I should be aware of before putting it on the network? Any help will be much appreciated.

As of right now it only updates the database. I have not implemented the requests yet to make it three tiered. FedEx will pay for a more capable JDBC driver. I guess I don't like the bridge driver because when running the servlet off the network, you have to update the ODBC driver manager with your database. I felt the need for change because I was not aware that I could make it platform independent simply using the browser. I am currently using tomcat 5.0 to run the servlet. I think my design is pretty good. If you could please expand on having every browser connect to a servlet that would intercede with the database. Here is my design:
* File: ProblemsServlet.java
* Created on July 5,2004 7:21 AM
package problems;
import java.io.*;
import java.net.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.sql.*;
* @author michaelvogel
* @version
* The information management group at FedEx must meet the service objectives
* for computer operations specified in FedEx's business plan. This group
* monitors and maintains the on-line sufficient software by providing 24 x 7
* on-site and on-call production support to the on line system and database
* software to ensure on-line function availability. This allows them to diagnose
* problems and recommend corrective actions.
* IBM designed the operating systems FedEx uses to run this software. FedEx
* uses multiple main frames to run these operating systems. Like any operating
* system, these contain bugs and errors. When problems or errors occur with
* the operating systems, FedEx will submit a report to IBM explaining what
* happened. IBM then sends a report back containing the error or fix number,
* and either an explanation on how to fix it or a patch that will fix it.
* FedEx is to take every fix report sent by IBM and store it in a database
* using Microsoft Access. This is done so that FedEx can quickly search for
* the solution to an error before dealing with IBM.
* Class ProblemsServlet responsibility is to allow for a client to update
* the database, search for inquires, and display recent inquires. It creates
* a connection to Microsoft access using sun.jdbc.odbc.JdbcOdbcDrive, an ODBC
* bridge. A connection is made using class HttpServlet. Once a connection is
* established it updates the Problems.mdb.
public class ProblemsServlet extends HttpServlet {
private Statement statement = null;
private Connection connection = null;
String URL = "jdbc:odbc:Problems";
String userName = "anonymous";
String password = "guest";
/** Initializes the servlet.
public void init(ServletConfig config) throws ServletException {
super.init(config);
try{
Class.forName( "sun.jdbc.odbc.JdbcOdbcDriver" );
connection =
DriverManager.getConnection( URL, userName, password );
catch( Exception e ){
e.printStackTrace();
connection = null;
/** Destroys the servlet.
public void destroy() {
try{
connection.close();
catch( Exception e ){
System.err.println( "Problem closing the database" );
/** Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods.
* @param request servlet request
* @param response servlet response
protected void processRequest(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType("text/html");
PrintWriter out = response.getWriter();
out.println("<html>");
out.println("<head>");
out.println("<title>Servlet</title>");
out.println("</head>");
out.println("<body>");
out.println("</body>");
out.println("</html>");
out.close();
/** Handles the HTTP <code>GET</code> method.
* @param request servlet request
* @param response servlet response
protected void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
processRequest(request, response);
/** Handles the HTTP <code>POST</code> method.
* @param request servlet request
* @param response servlet response
protected void doPost(HttpServletRequest req, HttpServletResponse res)
throws ServletException, IOException
String problemNumber, system, sev, status, version, vendor, date, fix,
action, customerImpact, description, comments;
problemNumber = req.getParameter( "Number");
system = req.getParameter( "System" );
sev = req.getParameter( "Sev" );
status = req.getParameter( "Status" );
version = req.getParameter( "Version" );
vendor = req.getParameter( "Vendor" );
date = req.getParameter( "Date" );
fix = req.getParameter( "Fix" );
action = req.getParameter( "Action" );
customerImpact = req.getParameter( "Imapct" );
description = req.getParameter( "Description" );
comments = req.getParameter( "Comments" );
PrintWriter output = res.getWriter();
res.setContentType( "text/html" );
boolean success = insertIntoDB("'"+ problemNumber + "','" + system +
"','" + sev + "','" + status + "','" + version + "','" + vendor +
"','" + date + "','" + fix + "','" + action + "','" +
customerImpact + "','" + description + "','" + comments +"'");
if ( success )
output.print( "<H2>Query add successfully!!</H2>" );
else
output.print( "<H2>An error occurred. " +
"Please try again later.<H2>" );
output.close();
* Creates the connection to the database. If a connection is established
* the values are inserted into the database in the correct fields.
* @param String values that represent the database fields
* @return true if connection is success and values are inserted correctly
* into the database. False is values do not match database fields.
private boolean insertIntoDB( String stringtoinsert )
try{
statement = connection.createStatement();
statement.execute(
"INSERT INTO Problems values (" + stringtoinsert + ");" );
statement.close();
catch ( Exception e ){
System.err.println( "ERROR: Problems with adding new entry" );
e.printStackTrace();
return false;
return true;
/** Returns a short description of the servlet.
public String getServletInfo() {
return "Short description";

Expdp impdp fails from 10g to 11g db version

Hello folks,
Export DB Version : 10.2.0.4
Import DB Version : 11.2.0.1
Export Log File
Export: Release 10.2.0.4.0 - Production on Wednesday, 03 November, 2010 2:19:20
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, Data Mining and Real Application Testing options
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 45 GB
. . exported "DYM"."CYCLE_COUNT_MASTER" 39.14 GB 309618922 rows
Master table "DYM"."SYS_EXPORT_SCHEMA_01" successfully loaded/unloaded
Dump file set for DYM.SYS_EXPORT_SCHEMA_01 is:
Job "DYM"."SYS_EXPORT_SCHEMA_01" successfully completed at 02:56:49
Import Log File
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "DYM_PRJ4"."CYCLE_COUNT_MASTER" failed to load/unload and is being skipped due to error:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at 10:54:38
from 10g expdp to 11g impdp is not allowed ? any thoughts appreciated ??

Nope , I do not see any error file.
Current log# 2 seq# 908 mem# 0:
Thu Nov 04 11:58:20 2010
DM00 started with pid=530, OS id=1659, job SYSTEM.SYS_IMPORT_FULL_02
Thu Nov 04 11:58:20 2010
DW00 started with pid=531, OS id=1661, wid=1, job SYSTEM.SYS_IMPORT_FULL_02
Thu Nov 04 11:58:55 2010
DM00 started with pid=513, OS id=1700, job SYSTEM.SYS_IMPORT_FULL_02
Thu Nov 04 11:58:55 2010
DW00 started with pid=520, OS id=1713, wid=1, job SYSTEM.SYS_IMPORT_FULL_02
Thu Nov 04 12:00:54 2010
Thread 1 cannot allocate new log, sequence 909
Private strand flush not complete
Current log# 2 seq# 908 mem# 0: ####################redo02.log
Thread 1 advanced to log sequence 909 (LGWR switch)
Current log# 3 seq# 909 mem# 0: ###################redo03.log
Thu Nov 04 12:01:51 2010
Thread 1 cannot allocate new log, sequence 910
Checkpoint not complete
Current log# 3 seq# 909 mem# 0:###################redo03.log

FC req copy into Simulation version

Hi,
Having an interesting problem at the moment, we have PIR's created in ECC that are then reprisented by FC Req's in APO, so all is as expected.
The issue that I am having is that if I copy the active version for a simulation version the FC Req's are being shown as Dep demand!!
Have I missed something on the copy back process?
Plus I have noticed that if for example the FC Req is for 10 in the active version not only does it change the element type but also splits the order down (as if rounding was being used) so I end up with 5 dependent demands of 2.
Thanks in advance.
Edited by: UKuser on Nov 19, 2009 2:38 PM

Hi,
1)For forecast coming as Dep demand, check whether the
ATP categories, category groups are transferred
correctly from active to simulation version.
2) Check the logs of copy version jobs which will give
some insight to you to act accordingly
3) For splitting of demand, check whether the lot size,
product split etc., are maintained accordingly and
transferred correctly
Regards
R. Senthil Mareeswaran.

Version parameter in impdp

I want import 11g dump file into 10g database
in version parameter i have to specify 11.1.0 or 10.2.0
thanks

You will need to perform expdp on the 11g database with VERSION set to 10.2.0, then perform the import on 10g.
http://docs.oracle.com/cd/E11882_01/server.112/e22490/dp_export.htm#autoId57
http://docs.oracle.com/cd/E11882_01/server.112/e22490/dp_overview.htm#CEGFCFFI
HTH
Srini

[req]Updated version of Panda3d

There is already an very outdated package . I tried just changing the version number, but it didn't work out.
You can find the sources here.

Thank you for taking your time with making a PGKBUILD. It built and installed quite nicely, however I am having some troubles actually using it. It seems like python can't find the libraries. I tried adding the panda3d.profile, as it was in the old build, but didn't help.
I get this error:
import direct.directbase.DirectStart
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: No module named direct.directbase.DirectStart
However, I noticed when I tried to start python from /opt/panda3d, I got another error.
>>> import direct.directbase.DirectStart
DirectStart: Starting the game.
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "direct/src/directbase/DirectStart.py", line 3, in <module>
from direct.showbase import ShowBase
File "direct/src/showbase/ShowBase.py", line 10, in <module>
from pandac.PandaModules import *
ImportError: No module named pandac.PandaModules
As it states, it is looking for some pandac stuff, however (at least my) pandac folder is empty (except for a folder called "input" which is also empty).
I also tried using 1.5.0 which just got released, no help.
Last edited by Canute (2008-03-20 03:18:28)

Expdb and impdb utilities

Hello,
I'm in an ORACLE 10g database, and trying to use the expdb and impdb utilities, but it keeps saying the command is not found. exp and imp work fine. My host system is LINUX. Does something else need to be set?
Rae

I believe that Oracle versions 10g and later provide both the orginal pair exp/imp, as well as the performance-enhancing *dp (DataPump) duo of expdp/impdp. The DataPump pair do not use the same syntax as the original export/import. As I recall, the dp enhancements are fairly ingenious, if you have time to read up on the dp tech notes.

My MAC is running very slow and i am a complete novice and don't know what to do. i have had my Mac since 2008 and its probably in a mess. if you can help i would be grateful. EtreCheck version: 1.9.15 (52) Report generated 8 September 2014 09:09:26

My MAC runs very slow. Rainbow wheel every time i try to go somewhere. Im a complete MAC novice. Only really use it for iTunes and email. the odd document here and there. The odd spreadsheet. Was brought up on a PC. I would imagine my system is in mess. I think i downloaded that Mackeeper which i have just discovered was not a good idea. I found a thread about EtreCheck and it suggested i posted the report of my machine which i have done.I only have 2GB of space. Not sure how much i have left. My wife keeps putting photos on here like they are going out of fashion. Bought the machine in 2008 because everybody said you have a MAC. I've never really got to grips with it but at least it worked. Now it does not run very well at all. That spinning wheel is driving me mad. HELP please, never ever used a forum light this either so please go gentle on me. Cheers Paul
EtreCheck version: 1.9.15 (52)
Report generated 8 September 2014 09:09:26 BST
Hardware Information: ?
iMac (20-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information: ?
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1680 x 1050
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:31:45
Disk Information: ?
Hitachi HDP725032GLA380 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (117.84 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information: ?
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Bose Corporation Bose USB Audio
Apple Computer, Inc. IR Receiver
Gatekeeper: ?
Mac App Store and identified developers
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
[loaded] net.sourceforge.MonolingualHelper.plist Support
Launch Agents: ?
[running] com.trusteer.rapport.rapportd.plist Support
User Login Items: ?
iTunesHelper
Internet Plug-ins: ?
Google Earth Web Plug-in: Version: 5.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
AmazonMP3DownloaderPlugin101749: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
eMusicRemote: Version: (null) Support
eMusic: Version: Unknown
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Flip4Mac WMV Support
Trusteer Endpoint Protection Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
      2% iTunes
      2% WindowServer
      0% coreaudiod
      0% fontd
      0% rapportd
Top Processes by Memory: ?
178 MB Finder
133 MB com.apple.WebKit.WebContent
109 MB iTunes
92 MB Safari
63 MB com.apple.quicklook.satellite
Virtual Memory Information: ?
24 MB Free RAM
821 MB Active RAM
807 MB Inactive RAM
291 MB Wired RAM
338 MB Page-ins
680 KB Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Version 1 is not getting activated in PR and PO

We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
Full points will be awarded.

Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Amir Hassan wrote:
We are using release strategies for PR and PO, along with we have to activate Version Management, which we have already activated (Active Version and 0 Version).
>
> But now Version 1 is not getting activated in system only Version 0 is appearing in PR or PO, even after revoking PR or PO system is reflecting all the changes in Version 0. I have even taken print out of PO but new version couldnu2019t triggered. All the relevant fields have been mentioned in version relevant fields of PR.
>
> The entire required configuration has been done, I have gone through whole forum many members have encountered the same problem but solution is not provided to any one. Kindly suggest in this regard.
>
> Full points will be awarded.
Dear Amir,
in pr version management , control data :select version active,version 0 ok, & external ok. &
field selection : reason required,short text req., requester req., external number & posting date are optional & save.
even with release strategy there is no problem
create a pr & save it.After release it. change the pr
after u canfind the versions 0 & 1.
in po version management , doc.category f doc.type nb pur.org xxxx ,control data :select version active,version 0 ok, field selection : reason required,short text req., requester req., external number & posting date are optional & save.
go to Set Up Change Displays as per standard nb is already there no need to change & category is blank
in category u have to maintain f(is for po) & save it.
create a po & save it.After release it. change the po
after u canfind the versions 0 & 1.
Regard's
Raj.

EXPDB & IMPDP db version reqs

Similar Messages

Maybe you are looking for