EXPDP generates new dmp file and reports "file already exists" error

Hello everyone,
Hope you all had a wonderful holiday. I got some problems with datapump expdp 10.2.0.4. It would be appreciated if you could provide some advice. Thanks in advance.
I newly created a 10.2.0.4 database. The database can startup and be connected via Toad without problem. I can also use impdp to import some data to the new database. But when I'm trying to use expdp to export a schema from the database, I got the following errors:
expdp parfile=expdp_scott_mfp1.parExport: Release 10.2.0.4.0 - 64bit Production on Monday, 26 December, 2011 22:10:49
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Real Application Clusters, Data Mining and Real Application Testing options
ORA-39001: invalid argument value
ORA-39000: bad dump file specification
ORA-31641: unable to create dump file "/u02/exports/mfp1/expdp_scott_mfp1_12262011.dmp"
ORA-27038: created file already exists
Additional information: 1
Every time I run the expdp, it just creates the dmp file (expdp_scott_mfp1_12262011.dmp) specified in the parfile under the EXPORT directory and reports "file already exists " error.
Your advice is highly appreciated.
Thanks.
Edited by: 904668 on Dec 27, 2011 8:47 AM

i thought I found the problem. Used same file name on dump file and log file. How stupid of me. Sorry for bothering. Thanks and happy new year!

Similar Messages

BOUNDED RECOVERY: CHECKPOINT: in ggserr.log and report file

Hi all, I recently setup GG Version 11.1.1.1 bidirectional and I have 2 extracts, 2 replicats and 2 pump parameter files. In the errorlog and report file I see
" +BOUNDED RECOVERY: CHECKPOINT: for object pool 1: p3321868_extr: st+
+art=SeqNo: 230, RBA: 58836496, SCN: 0.8528654 (8528654), Timestamp: 2011-10-17 20:02:44.000000, end=SeqNo: 230, RBA: 58836992, SCN: 0.8528654 (8528654), Time+
+stamp: 2011-10-17 20:02:44.000000+."
And replication stops after this.
I just stopped the extract process and started with "*start <extract> BRRESET*" and it works fine for sometime and again I see the same message in ggserr.log
Can anyone please help me regarding this.
Thanks,
VKR

No other error messages? Nothing in the replicat report showing an error?
Given that you've used BRRESET, you've either dug into the Reference guide or found this note on Oracle Support:
Extract Abends With Bounded Recovery Errors In The Report File (Doc ID 1293772.1)
Extract may be stuck on a zero-length record.
If it keeps happening, I'd create an SR with support.

How do you extract SQL from Oracle Forms and Reports files?

I am developing an "as is" data model for a government client for a 14 year old system that has three databases, 20 schemas, over 1500 tables, and over 23,000 columns. Needless to say, I do not plan to perform a manual mapping of data to screens and reports.
Most of the system has been developed in Oracle Forms and Reports. I am trying to map the live tables and columns to forms and reports.
The process here has been to save the forms and reports files as .fmb and .rdf files. The client does not have an available copy of Oracle Designer, which I understand could be used to extract the SQL.
Is there a utility somewhere that can parse the .fmb and .rdf files to extract the SQL?
Thanks,
Jim Gearing

Jim,
I don't know of any utility that will do this. You can convert and save each fmb as a fmt so you can view/search the contents , but I don't recommend that approach.
On the other hand, you download a copy of Oracle Designer:
http://www.oracle.com/technology/software/index.html
It usually is included with Oracle Forms and Reports.

How to add wsdl files and bpel files in new folders automatically

Hi All,
In our project, we have a lot of wsdl files and bpel file generated.
By default, they are all under the folder of SOA Content, like a mess.
I want to put them in separate folders.
I can manually change the wsdl location and manually change references to these wsdls, but it will take a lot of extra time to do so.
Is there a way to achieve this in UI?
Thanks and Regards!
Bruce

Hi Eric,
Thanks for your reply!
I can use refector->move to move the wsdl file to newly created folders.
But unfortunately, JDeveloper won't update the references to the wsdl files.
I have to update the references manually, and it will take a lot of time if there exists many wsdl files in one project.
Thanks and Regards!
Bruce

How to export a ABAP Report as both a Text file and Excel file?

Hi Gurus,
I need to develop a report which can be exported as both Text file and Excel file.
Can you guys sugest me the FM's which I have to use? and parameters to be passed.
Post one example so that I can get better idea.
Standard ABAP editor directly have the options to save file as .xls or .txt file. User wants to export the report as required.
I know it is simple but need the efficient way.
So thanks to all of you.
Regards,
Ravi

Hi,
Try in the below Example:
*& DATA DECLARATION *
TABLES: MARA, "GENERAL MASTER DATA
MARC, "PLANT DATA FOR MATERIAL
MARD, "STORAGE LOCATION DATA FOR MATERIAL
MBEW, "MATERIAL VALUATION
MVKE, "SALES DATA FOR MATERIAL
MAKT, "MATERIAL DESCRIPTION
EKKO, "PURCHASING DOCUMENT HEADER
EKPO, "PURCHASING DOCUMENT ITEM
VBAK, "SALES DOCUMENT HEADER DATA
VBAP. "SALES DOCUMENT ITEM DATA
TYPE-POOLS : SLIS.
DATA: VT_FIELDCAT1 TYPE SLIS_T_FIELDCAT_ALV,
V_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
V_LAYOUT TYPE SLIS_LAYOUT_ALV,
BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
BEGIN OF I_MARA OCCURS 0,
MATNR LIKE MARA-MATNR, "MATERIAL NUMBER
MBRSH LIKE MARA-MBRSH, "INDUSTRY SECTOR
MEINS LIKE MARA-MEINS, "BASE UNIT OF MEASURE
MATKL LIKE MARA-MATKL, "MATERIAL GROUP
END OF I_MARA,
BEGIN OF I_MARC OCCURS 0,
MATNR LIKE MARC-MATNR, "MATERIAL NUMBER
WERKS LIKE MARC-WERKS, "PLANT
LVORM LIKE MARC-LVORM, "FLAG MATERIAL FOR DELETION AT PLANT
"LEVEL
DISPO LIKE MARC-DISPO, "MRP CONTROLLER
END OF I_MARC,
BEGIN OF I_MAKT OCCURS 0,
MATNR LIKE MAKT-MATNR, "MATERIAL NUMBER
MAKTX LIKE MAKT-MAKTX, "MATERIAL DESCRIPTION
SPRAS LIKE MAKT-SPRAS, "LANGUAGE KEY
END OF I_MAKT,
BEGIN OF I_MVKE OCCURS 0,
MATNR LIKE MVKE-MATNR, "MATERIAL NUMBER
VKORG LIKE MVKE-VKORG, "SALES ORGANIZATION
VTWEG LIKE MVKE-VTWEG, "DISTRIBUTION CHANNEL
END OF I_MVKE,
BEGIN OF I_MARD OCCURS 0,
MATNR LIKE MARD-MATNR, "MATERIAL NUMBER
LGORT LIKE MARD-LGORT, "STORAGE LOCATION
LABST LIKE MARD-LABST, "VALUATED STOCK WITH UNRESTRICTED USE
END OF I_MARD,
BEGIN OF I_EKPO OCCURS 0,
EBELN LIKE EKPO-EBELN, "PURCHASING DOCUMENT NUMBER
EBELP LIKE EKPO-EBELP, "ITEM NUMBER OF PURCHASING DOCUMENT
MATNR LIKE EKPO-MATNR, "MATERIAL NUMBER
END OF I_EKPO,
BEGIN OF I_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF I_VBAP,
BEGIN OF I_OUT OCCURS 0,
MATNR LIKE MARC-MATNR,
WERKS LIKE MARC-WERKS,
LVORM LIKE MARC-LVORM,
DISPO LIKE MARC-DISPO,
MBRSH LIKE MARA-MBRSH,
MEINS LIKE MARA-MEINS,
MATKL LIKE MARA-MATKL,
VKORG LIKE MVKE-VKORG,
VTWEG LIKE MVKE-VTWEG,
SPRAS LIKE MAKT-SPRAS,
MAKTX LIKE MAKT-MAKTX,
LGORT LIKE MARD-LGORT,
LABST LIKE MARD-LABST,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
VBELN LIKE VBAP-VBELN,
POSNR LIKE VBAP-POSNR,
END OF I_OUT,
BEGIN OF I_HEADING OCCURS 0,
TEXT1(20),
TEXT2(20),
TEXT3(20),
TEXT4(20),
TEXT5(20),
TEXT6(20),
TEXT7(20),
TEXT8(20),
TEXT9(20),
TEXT10(20),
TEXT11(40),
TEXT12(20),
TEXT13(20),
TEXT14(20),
TEXT15(20),
TEXT16(20),
TEXT17(20),
END OF I_HEADING.
*& S E L E C T I O N - S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-100.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR. "OBLIGATORY.
PARAMETERS: P_WERKS LIKE MARC-WERKS. "OBLIGATORY.
SELECT-OPTIONS: S_LGORT FOR MARD-LGORT,
S_DISPO FOR MARC-DISPO,
S_EBELN FOR EKPO-EBELN .
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-101.
PARAMETERS : RB1 RADIOBUTTON GROUP G1,
RB2 RADIOBUTTON GROUP G1,
RB3 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B2.
*& S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
SELECT MATNR WERKS LVORM DISPO FROM MARC
INTO CORRESPONDING FIELDS OF TABLE I_MARC
WHERE MATNR IN S_MATNR
AND DISPO IN S_DISPO
AND WERKS = P_WERKS.
IF I_MARC[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARC'.
EXIT.
ENDIF.
PERFORM PURCHASEDATA_VALIDATION.
PERFORM SALESDATA_VALIDATION.
SELECT MATNR LGORT LABST FROM MARD INTO TABLE I_MARD
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR
AND WERKS EQ P_WERKS
AND LGORT IN S_LGORT.
IF I_MARD[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARD'.
EXIT.
ENDIF.
SELECT MATNR VKORG VTWEG FROM MVKE INTO TABLE I_MVKE
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR.
IF I_MVKE[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MVKE'.
EXIT.
ENDIF.
LOOP AT I_MARC.
MOVE-CORRESPONDING I_MARC TO I_OUT.
CLEAR MARC.
SELECT SINGLE MATNR MBRSH MEINS MATKL FROM MARA
INTO CORRESPONDING FIELDS OF MARA
WHERE MATNR = I_OUT-MATNR.
IF SY-SUBRC = 0.
MOVE: MARA-MBRSH TO I_OUT-MBRSH,
MARA-MEINS TO I_OUT-MEINS,
MARA-MATKL TO I_OUT-MATKL.
ELSE.
CONTINUE.
ENDIF.
SELECT SINGLE MATNR MAKTX SPRAS FROM MAKT
INTO CORRESPONDING FIELDS OF MAKT
WHERE MATNR = I_OUT-MATNR.
IF SY-SUBRC = 0.
MOVE: MAKT-MAKTX TO I_OUT-MAKTX,
MAKT-SPRAS TO I_OUT-SPRAS.
ELSE.
CONTINUE.
ENDIF.
LOOP AT I_EKPO WHERE MATNR = I_MARC-MATNR.
MOVE: I_EKPO-EBELN TO I_OUT-EBELN,
I_EKPO-EBELP TO I_OUT-EBELP.
ENDLOOP.
LOOP AT I_VBAP WHERE MATNR = I_MARC-MATNR.
MOVE: I_VBAP-VBELN TO I_OUT-VBELN,
I_VBAP-POSNR TO I_OUT-POSNR.
ENDLOOP.
LOOP AT I_MARD WHERE MATNR = I_MARC-MATNR.
MOVE: I_MARD-LABST TO I_OUT-LABST,
I_MARD-LGORT TO I_OUT-LGORT.
ENDLOOP.
LOOP AT I_MVKE WHERE MATNR = I_MARC-MATNR.
MOVE: I_MVKE-VKORG TO I_OUT-VKORG,
I_MVKE-VTWEG TO I_OUT-VTWEG.
APPEND I_OUT.
ENDLOOP.
CLEAR I_OUT.
ENDLOOP.
PERFORM OPTIONS.
FORM OPTIONS *
FORM OPTIONS.
IF RB2 = 'X'.
PERFORM FIELDCAT.
PERFORM OUTPUT.
ELSE.
IF RB1 = 'X'.
PERFORM HEADINGS.
PERFORM DLOAD.
ELSE.
IF RB3 = 'X'.
PERFORM HEADINGS.
PERFORM DLOAD.
PERFORM FIELDCAT.
PERFORM OUTPUT.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. "OPTIONS
FORM HEADINGS *
FORM HEADINGS.
I_HEADING-TEXT1 = 'MATNR'.
I_HEADING-TEXT2 = 'WERKS'.
I_HEADING-TEXT3 = 'LVORM'.
I_HEADING-TEXT4 = 'DISPO'.
I_HEADING-TEXT5 = 'MBRSH'.
I_HEADING-TEXT6 = 'MEINS'.
I_HEADING-TEXT7 = 'MATKL'.
I_HEADING-TEXT8 = 'VKORG'.
I_HEADING-TEXT9 = 'VTWEG'.
I_HEADING-TEXT10 = 'SPRAS'.
I_HEADING-TEXT11 = 'MAKTX'.
I_HEADING-TEXT12 = 'LGORT'.
I_HEADING-TEXT13 = 'LABST'.
I_HEADING-TEXT14 = 'EBELN'.
I_HEADING-TEXT15 = 'EBELP'.
I_HEADING-TEXT16 = 'VBELN'.
I_HEADING-TEXT17 = 'POSNR'.
APPEND I_HEADING.
ENDFORM. "HEADINGS
FORM DLOAD *
FORM DLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\MATSTK.XLS'
FILETYPE = 'DAT'
WRITE_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = I_HEADING
EXCEPTIONS
FILE_WRITE_ERROR = 1.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\MATSTK.XLS'
FILETYPE = 'DAT'
APPEND = 'X'
WRITE_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = I_OUT.
ENDFORM. "DLOAD
FORM FIELDCAT *
FORM FIELDCAT.
V_FIELDCAT-COL_POS = '1'.
V_FIELDCAT-FIELDNAME = 'MATNR'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-HOTSPOT = 'X'.
V_FIELDCAT-REF_FIELDNAME = 'MATNR'.
V_FIELDCAT-REF_TABNAME = 'MARC'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '2'.
V_FIELDCAT-FIELDNAME = 'WERKS'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'WERKS'.
V_FIELDCAT-REF_TABNAME = 'MARC'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '3'.
V_FIELDCAT-FIELDNAME = 'LVORM'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'LVORM'.
V_FIELDCAT-REF_TABNAME = 'MARC'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '4'.
V_FIELDCAT-FIELDNAME = 'DISPO'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'DISPO'.
V_FIELDCAT-REF_TABNAME = 'MARC'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '5'.
V_FIELDCAT-FIELDNAME = 'MBRSH'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'MBRSH'.
V_FIELDCAT-REF_TABNAME = 'MARA'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '6'.
V_FIELDCAT-FIELDNAME = 'MEINS'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'MEINS'.
V_FIELDCAT-REF_TABNAME = 'MARA'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '7'.
V_FIELDCAT-FIELDNAME = 'MATKL'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'MATKL'.
V_FIELDCAT-REF_TABNAME = 'MARA'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '8'.
V_FIELDCAT-FIELDNAME = 'VKORG'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'VKORG'.
V_FIELDCAT-REF_TABNAME = 'MVKE'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '9'.
V_FIELDCAT-FIELDNAME = 'VTWEG'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'VTWEG'.
V_FIELDCAT-REF_TABNAME = 'MVKE'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '10'.
V_FIELDCAT-FIELDNAME = 'SPRAS'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'SPRAS'.
V_FIELDCAT-REF_TABNAME = 'MAKT'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '11'.
V_FIELDCAT-FIELDNAME = 'MAKTX'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'MAKTX'.
V_FIELDCAT-REF_TABNAME = 'MAKT'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '12'.
V_FIELDCAT-FIELDNAME = 'LGORT'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'LGORT'.
V_FIELDCAT-REF_TABNAME = 'MARD'.
V_FIELDCAT-SELTEXT_L = 'STRG LOCT'.
V_FIELDCAT-OUTPUTLEN = 10.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '13'.
V_FIELDCAT-FIELDNAME = 'LABST'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-SELTEXT_M = 'STOCK'.
V_FIELDCAT-OUTPUTLEN = 15.
V_FIELDCAT-REF_FIELDNAME = 'LABST'.
V_FIELDCAT-REF_TABNAME = 'MARD'.
V_FIELDCAT-DO_SUM = 'X'.
V_LAYOUT-TOTALS_TEXT = 'TOTAL STOCK:'.
V_FIELDCAT-HOTSPOT = 'X'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '14'.
V_FIELDCAT-FIELDNAME = 'EBELN'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-HOTSPOT = 'X'.
V_FIELDCAT-REF_FIELDNAME = 'EBELN'.
V_FIELDCAT-REF_TABNAME = 'EKPO'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '15'.
V_FIELDCAT-FIELDNAME = 'EBELP'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'EBELP'.
V_FIELDCAT-REF_TABNAME = 'EKPO'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '16'.
V_FIELDCAT-FIELDNAME = 'VBELN'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-HOTSPOT = 'X'.
V_FIELDCAT-REF_FIELDNAME = 'VBELN'.
V_FIELDCAT-REF_TABNAME = 'VBAP'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '17'.
V_FIELDCAT-FIELDNAME = 'POSNR'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'POSNR'.
V_FIELDCAT-REF_TABNAME = 'VBAP'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
ENDFORM. "FIELDCAT
FORM OUTPUT *
FORM OUTPUT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'
I_GRID_TITLE = 'CLICK ON MATERIAL/PURDOC/SALESDOC FOR DETAILS'
I_CALLBACK_USER_COMMAND = 'DISPLAYDETAILS'
IS_LAYOUT = V_LAYOUT
IT_FIELDCAT = VT_FIELDCAT1
TABLES
T_OUTTAB = I_OUT.
IF SY-SUBRC 0.
ENDIF.
ENDFORM. "OUTPUT
FORM TOP-OF-PAGE *
FORM TOP-OF-PAGE.
DATA: T_HEADER TYPE SLIS_T_LISTHEADER,
WA_HEADER TYPE SLIS_LISTHEADER.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = 'REPORT FOR : '.
APPEND WA_HEADER TO T_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'S'.
WA_HEADER-INFO = 'MATERIAL DETAILS'.
APPEND WA_HEADER TO T_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'S'.
WA_HEADER-INFO = 'PURCHASE ORDER DETAILS'.
APPEND WA_HEADER TO T_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'S'.
WA_HEADER-INFO = 'SALES ORDER DETAILS'.
APPEND WA_HEADER TO T_HEADER.
CLEAR WA_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
I_LOGO = 'GEAR'
IT_LIST_COMMENTARY = T_HEADER.
ENDFORM. "TOP-OF-PAGE
*& FORM PURCHASEDATA_VALIDATION *
FORM PURCHASEDATA_VALIDATION.
SELECT EBELN EBELP MATNR
FROM EKPO
INTO TABLE I_EKPO
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR
AND EBELN IN S_EBELN
AND WERKS EQ P_WERKS.
IF I_EKPO[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA IS SELECTED FROM TABLE EKPO'.
EXIT.
ENDIF.
DATA: T_EKPO LIKE I_EKPO OCCURS 0 WITH HEADER LINE.
T_EKPO] = I_EKPO[.
REFRESH I_EKPO.
FREE I_EKPO.
LOOP AT T_EKPO.
SELECT SINGLE EBELN FROM EKKO INTO EKPO-EBELN
WHERE EBELN = T_EKPO-EBELN.
IF SY-SUBRC = 0.
MOVE-CORRESPONDING T_EKPO TO I_EKPO.
APPEND I_EKPO.
CLEAR I_EKPO.
ELSE.
CONTINUE.
ENDIF.
ENDLOOP.
SORT I_EKPO.
ENDFORM. "PURCHASEDATA_VALIDATION
*& FORM SALESDATA_VALIDATION *
FORM SALESDATA_VALIDATION.
SELECT VBELN POSNR MATNR
FROM VBAP
INTO CORRESPONDING FIELDS OF TABLE
I_VBAP FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR.
DATA: T_VBAP LIKE I_VBAP OCCURS 0 WITH HEADER LINE.
T_VBAP] = I_VBAP[.
REFRESH I_VBAP.
FREE I_VBAP.
LOOP AT T_VBAP.
SELECT SINGLE VBELN FROM VBAK INTO VBAK-VBELN
WHERE VBELN = T_VBAP-VBELN.
IF SY-SUBRC = 0.
MOVE-CORRESPONDING T_VBAP TO I_VBAP.
APPEND I_VBAP.
CLEAR I_VBAP.
ELSE.
CONTINUE.
ENDIF.
ENDLOOP.
SORT I_VBAP.
ENDFORM. "SALESDATA_VALIDATION
Regards ,
Nishant

Generating the .CAP, .JCA and .EXP files.

Hello;
I have downloaded the java_card_kit-2_1_2 to ‘C:\java_card_kit-2_2_1", and I tried to compile HelloWorld application that shipped with its distribution. I was successfully able to compile the file HelloWorld.java, but I am having lots of problems in generating the .CAP, .JCA and .EXP files.
I tried to follow the instructions in jcdk2.2.1 user guide, but of no use.
This is what I am basically doing:
_Step1) Setting my Environment Variables as follows:_
*set JC_HOME=C:\java_card_kit-2_2_1*
*set JAVA_HOME=C:\Program Files\Java\jdk1.6.0_16*
*set PATH=.;%JC_HOME%\bin;%JAVA_HOME%\bin;%PATH%*
_Step2) Compile the java file_
The package of HelloWorld.java is : src.com.sun.javacard.samples.HelloWorld, so to compile I use the following command line:
*javac -g -target 1.1 -source 1.3 -classpath .\classes;..\lib\api.jar;..\lib\installer.jar src\com\sun\javacard\samples\HelloWorld\*.java*
_Step3) Converting_
I have the class file generated in the package folder: src.com.sun.javacard.samples.HelloWorld, I generated an .opt file as follows:
+-out EXP JCA CAP+
+-exportpath .+
+-debug+
+-applet 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1:0x1 src.com.sun.javacard.samples.HelloWorld.HelloWorld+
+src.com.sun.javacard.samples.HelloWorld 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1 1.0+
Finally, the command line for conversion is:
*set _CLASSES=%JC_HOME%\lib\apduio.jar;%JC_HOME%\lib\apdutool.jar;%JC_HOME%\lib\jcwde.jar;%JC_HOME%\lib\converter.jar;%JC_HOME%\lib\scriptgen.jar;%JC_HOME%\lib\offcardverifier.jar;%JC_HOME%\lib\api.jar;%JC_HOME%\lib\installer.jar;%JC_HOME%\lib\capdump.jar;%JC_HOME%\samples\classes;%CLASSPATH%;*
*"%JAVA_HOME%\bin\java" -classpath %_CLASSES% com.sun.javacard.converter.Converter -config src\com\sun\javacard\samples\HelloWorld\HelloWorld.opt*
After successfully executing all these lines, I get the following error:
Java Card 2.2.1 Class File Converter, Version 1.3
Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
*+error: class HelloWorld does not belong to package src.com.sun.javacard.samples.HelloWorld.+*
conversion completed with 1 errors and 0 warnings.
PLEASE HELP! I also tried adding -classdir to the opt file, but still did not work.
The whole point behind this exercise is to import a javacard framework of version 1.0
Really appreciate anyone's help! Thanks in advance.

Thank you Shane, but my claSs file is indeed saved in "C:\java_card_kit-2_2_1\samples\src\com\sun\javacard\samples\HelloWorld"
Now since I am running my command lines from C:\java_card_kit-2_2_1\samples, so I guess that the class directory is:
src.com.sun.javacard.samples.HelloWorld
Right?

Generation of .ecs file and .xsd file

Hi,
I am working on the Acme-GlobalChips tutorial Query using File 1.0 protocol.
I have few question on that.
While creating the Business actions and Trading partner IN B2B we use two 850.ecs and 850.xsd.Can these be used for all the trading partners or they are partner specific.If not then do we develop it using Document Editor.
Moreover if after we create the .ecs using the tool can we generate the .xsd file using same tool.
I have this doubt because I used the .ecs file provide with the tutorial and used EDI file provide by some other partner it worked.I mean I was able to generate the EDI-Xml as payload in reports section of B2B.
Can some help me on this.
Regards
Lalit

Hi Lalit,
1. Yes. Different Trading partners can use the same Business action. However, you can also override the .ecs file and .xsd file as per your requirement.
2. We can also generate .xsd files using the Document editor.
Regards,
Dheeraj

Announcing new activity logging and reporting capabilities for Office 365

Announcing new activity logging and reporting capabilities for Office 365We are pleased to announce the rollout of new activity logging and reporting capabilities for Office 365, including the Office 365 activity report, comprehensive logging capability, PowerShell command or cmdlet and a preview of the Office 365 Management Activity API.Thisnew capability provides you increased transparency, allowing you to monitor and investigate actions taken on your data, and comply with laws and regulations.Office 365 activity reportThe Office 365 activity report enables you to investigate a user’s activity by searching for a user, file or other resource across SharePoint Online, One Drive for Business, Exchange Online and Azure Active Directory, and then download the activities to a CSV (comma separate values) file. You can filter by date range,...
This topic first appeared in the Spiceworks Community

Hi,
Do you have any specific questions? We'll certainly try to help you, but we won't do your homework for you. That wouldn't help you learn at all.
I recommend looking over the learning materials here, they're quite good for getting started with PowerShell:
http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Hi all, need data file and co file after single transport in 6.4 or 6.7

hi all
following is the requirement
To process/compile the attached programs (given below) in 6.4/7 Kernel (SAP 6.4 version or 6.7 version )and send a single transport (Data File and Co File).
these data file and co file are flat files.
CAN ANYONE HELP ME GETTING THESE FLAT FILES. I need these flat files urgently.
WHAT U HAVE TO DO IS:
IF U HAVE 6.4 OR 6.7 VERSION, JUST TRANSPORT FOLLOWING 10 PROGRAMS IN SINGLE TRANSPORT IN TESTING SYSTEM OR DEVELOPEMENT SYSTEM AND AFTER GETTING DATA FILE AND CO FILE U CAN REVERT THE TRANSPORT.
Programs files are as follows: (total number of prog is 10)
1.
FUNCTION Z_3N_CKS_EXIST_USER .
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" VALUE(CKSMDTID) TYPE USR02-MANDT DEFAULT SY-MANDT
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
*" EXCEPTIONS
*" USER_DONT_EXIST
*" USER_EXISTS
FUNCTION TO CHECK IF USER EXISTS
CLEAR RCODE.
CALL FUNCTION 'USER_EXISTS'
EXPORTING
BNAME = CKSUSRID
CLIENT = CKSMDTID
EXCEPTIONS
USER_DONT_EXIST = 1
USER_EXISTS = 0.
RCODE = SY-SUBRC.
ENDFUNCTION.
2.
FUNCTION Z_3N_CKS_LOCKSTATE.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
FUNCTION TO OBTAIN THE CURRENT LOCK STATUS FOR A USER
*{ PASSGOAPR06
*\DATA:LOCKSTATE(50) type c,
*\C_LOCKED_BY_ADMIN like usr02-uflag.
*\tables:usr02.
DATA:LOCKSTATE(50) type c.
*} PASSGOAPR06
CLEAR: RCODE, LOCKSTATE.
SELECT SINGLE * FROM USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC <> 0.
RCODE = 01. "No such User
EXIT.
ENDIF.
*{ PASSGOAPR06
IF USR02-UFLAG Z C_LOCKED_BY_ADMIN AND
USR02-UFLAG Z C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'UNLOCKED'.
RCODE = 00.
ELSE.
IF USR02-UFLAG O C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'LOCKED_BY_FAILED_LOGON'.
RCODE = 02.
ENDIF.
IF USR02-UFLAG O C_LOCKED_BY_ADMIN.
LOCKSTATE = 'LOCKED_BY_ADMIN'.
RCODE = 02.
ENDIF.
ENDIF.
uflag = usr02-uflag.
IF UFLAG Z C_LOCKED_BY_ADMIN AND
UFLAG Z C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'UNLOCKED'.
RCODE = 00.
ELSE.
IF UFLAG O C_LOCKED_BY_FAILED_LOGON.
LOCKSTATE = 'LOCKED_BY_FAILED_LOGON'.
RCODE = 02.
ENDIF.
IF UFLAG O C_LOCKED_BY_ADMIN.
LOCKSTATE = 'LOCKED_BY_ADMIN'.
RCODE = 02.
ENDIF.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
3.
FUNCTION Z_3N_CKS_PWDCHG_INITIAL.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" VALUE(CKSUSRPWD) TYPE RSYST-BCODE
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
*" TABLES
*" RETURN STRUCTURE BAPIRET2
FUNCTION TO INITIALISE USERs PASSWORD, USER WILL BE FORCED
TO CHANGE PASSWORD ON NEXT LOGIN
CLEAR: USR02, RCODE.
SELECT SINGLE * from USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC <> 0.
RCODE = 01.
else.
CALL FUNCTION 'BAPI_USER_CHANGE'
EXPORTING
USERNAME = CKSUSRID
PASSWORD = CKSUSRPWD
PASSWORDX = 'X'
TABLES
RETURN = RETURN.
loop at return.
if return-type eq 'E' or return-type eq 'A'.
rcode = 13.
endif.
endloop.
endif.
ENDFUNCTION.
4.
FUNCTION Z_3N_CKS_VERIFY_USER.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE RSYST-BNAME
*" VALUE(CKSUSRPWD) TYPE RSYST-BCODE OPTIONAL
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
FUNCTION TO VALIDATE A USER
*{ PASSGOAPR06
TABLES:USR02.
CLEAR: USR02, RCODE.
SELECT SINGLE * from USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC = 4.
RCODE = 01. "no such user
EXIT.
ELSEIF CKSUSRPWD = SPACE.
RCODE = 03. "invalid old password
EXIT.
ELSE.
CALL FUNCTION 'SUSR_LOGIN_CHECK_RFC'
EXPORTING
BNAME = CKSUSRID
PASSWORD = CKSUSRPWD
EXCEPTIONS
WAIT = 1
USER_LOCKED = 2
USER_NOT_ACTIVE = 3
PASSWORD_EXPIRED = 4
WRONG_PASSWORD = 5
NO_CHECK_FOR_THIS_USER = 6
INTERNAL_ERROR = 7
OTHERS = 8
CASE SY-SUBRC.
WHEN '2'. RCODE = 02. "user disabled/blocked
WHEN '3'. RCODE = 02. "user disabled/blocked
WHEN '4'. RCODE = 03. "invalid old password
WHEN '5'. RCODE = 03. "invalid old password
WHEN '8'. RCODE = 12. "internal error
ENDCASE.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
5.
*& Include ZMS01JTOP *
PROGRAM MS01JTOP MESSAGE-ID 01 LINE-SIZE 132. "Berechtigungsdatenpflege
13.08.93
INCLUDE MS01CTP2.
INCLUDE MS01CTCO.
TABLES: XU200, XU213, XU310, XU350, XU390, XU400.
TABLES: TSTC, TSP03, TPARA, TPARAT.
TABLES: *USR01, *USR03, USR15.
TABLES: SOUD, SOUD3.
*ABLES: ZCSA, ADRS.
*{ PASSGOAPR06
TABLES: usr02.
DATA: uflag type x.
DATA: begin of return occurs 0.
INCLUDE structure bapiret2.
DATA: end of return.
DATA calling_cksusrid like usr02-bname.
DATA: init_pass like BAPIPWD.
INCLUDE USER_CONSTANTS.
*} PASSGOAPR06
CONTROLS TC213 TYPE TABLEVIEW USING SCREEN 213.
CONTROLS TC520 TYPE TABLEVIEW USING SCREEN 350.
DATA: COPYOK TYPE I,
RENAMEOK TYPE I,
DATFM1,
DATFM2,
DATFM3,
DATFM4,
DCPFM1,
DCPFM2,
USERNAME LIKE USR01-BNAME,
LOCK,
UNLO,
STATFLAG TYPE I VALUE 0,
NAVIFLAG TYPE I VALUE 0,
PARTOPIX TYPE I,
PARFILL TYPE I,
PARAMETER LIKE USR05-PARVA,
PARID LIKE USR05-PARID,
PARLOOP LIKE SY-STEPL,
SHOW_ONLY VALUE ' ',
INTPRO_LOADED TYPE I VALUE 0,
EXT_SECURITY VALUE ' '.
DATA: H_201_USGRP LIKE USGRP-USERGROUP,
H_201_VALID TYPE C,
CC201 LIKE SY-CUCOL VALUE 2,
CR201 LIKE SY-CUROW VALUE 6,
SAVE_LINE201 LIKE SY-LILLI VALUE 1,
SAVE_LSIND201 LIKE SY-LSIND VALUE 1.
DATA: OFFICENAME LIKE SOUD-USRNAM.
DATA: BEGIN OF NAME_IN.
INCLUDE STRUCTURE SOUD3.
DATA: END OF NAME_IN.
DATA: BEGIN OF NAME_OUT.
INCLUDE STRUCTURE SOUD3.
DATA: END OF NAME_OUT.
DATA: BEGIN OF EMPTYPROF OCCURS 2.
INCLUDE STRUCTURE USREF.
DATA: END OF EMPTYPROF.
DATA: BEGIN OF PROFILES OCCURS 10.
INCLUDE STRUCTURE USREF.
DATA: END OF PROFILES.
DATA: MAXPAR TYPE I VALUE 300.
DATA: BEGIN OF TABPAR OCCURS 300,
PARID LIKE USR05-PARID,
PARVA LIKE USR05-PARVA,
END OF TABPAR.
DATA: BEGIN OF DELTAB OCCURS 50,
USGRP LIKE USR02-CLASS,
END OF DELTAB.
DATA: BEGIN OF ADDTAB OCCURS 50,
USGRP LIKE USR02-CLASS,
END OF ADDTAB.
DATA: BEGIN OF ADDRESS_DATA.
INCLUDE STRUCTURE SADRP_USR.
DATA: END OF ADDRESS_DATA.
DATA:
CLEAR TYPE X VALUE '00'.
*ATA: BEGIN OF ADRSDATEN.
INCLUDE STRUCTURE ADRS.
*ATA: END OF ADRSDATEN.
06.10.95 Tosun
DATA 930_FLAG.
"$$
6.
FUNCTION Z_3N_CKS_LOCK_USER.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
CLEAR RCODE.
*{ PASSGOAPR06
*\ PERFORM LOCK_USER IN PROGRAM ZSAPMS01J USING CKSUSRID.
*\ IF SY-SUBRC <> 0.
*\ RCODE = SY-SUBRC.
*\ EXIT.
*\ ELSE.
*\ COMMIT WORK.
*\ ENDIF.
the report (form) is dumping.
so we try it with the correct BAPI
CALL FUNCTION 'BAPI_USER_LOCK'
EXPORTING
USERNAME = CKSUSRID
TABLES
RETURN = return
IF return-type <> 'S'.
RCODE = '8'.
rollback work.
EXIT.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
7.
FUNCTION Z_3N_CKS_PWDCHG_DIRECT.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" VALUE(CKSUSRPWD) TYPE RSYST-BCODE
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
*" TABLES
*" RETURN STRUCTURE BAPIRET2
FUNCTION TO CHANGE USERs PASSWORD
Password is initialised to a fixed value,
to avoid having to provide the valid old password
If the password change fails, the change is
rolled back - this is required because
BAPI_USER_CHANGE does an internal commit.
CLEAR: USR02, RCODE.
DATA: L_TIME LIKE SY-UZEIT,
ZLIN TYPE I.
*{ PASSGOAPR06
calling_cksusrid = cksusrid. "Save calling userid
init_pass = 'INITPASS'.
*} PASSGOAPR06
do 1 times.
SELECT SINGLE * from USR02 WHERE BNAME = CKSUSRID.
IF SY-SUBRC <> 0.
RCODE = 1.
else.
* Change login to initpass.
CALL FUNCTION 'BAPI_USER_CHANGE'
EXPORTING
USERNAME = CKSUSRID
*{ PASSGOAPR06
*\ PASSWORD = 'INITPASS'
PASSWORD = init_pass
*} PASSGOAPR06
PASSWORDX = 'X'
TABLES
RETURN = RETURN.
* Evaluate return table, if not success, rcode = 13
describe table return lines zlin.
IF zlin > 0.
IF return-type ne 'S'.
rcode = 13.
exit.
ENDIF.
ENDIF.
* Wait 1 second, otherwise table ush02 gets the same key as before.
* Not very good, but its the only way, because the wait up to
* statement includes a db-commit.
L_TIME = sy-uzeit.
WHILE L_TIME = sy-uzeit.
GET TIME.
ENDWHILE.
* Change 'INITPASS' to input login
CALL FUNCTION 'SUSR_USER_CHANGE_PASSWORD_RFC'
EXPORTING
BNAME = CKSUSRID
PASSWORD = 'INITPASS'
NEW_PASSWORD = CKSUSRPWD
NEW_BCODE = '0000000000000000'
NEW_CODVN = ' '
EXCEPTIONS
CHANGE_NOT_ALLOWED = 1
PASSWORD_NOT_ALLOWED = 2
INTERNAL_ERROR = 3
CANCELED_BY_USER = 4
OTHERS = 5.
case sy-subrc.
when '0'. rcode = 0.
when '1'. rcode = 2.
when '2'. rcode = 4.
when '3'. rcode = 12.
when '4'. rcode = 2.
when '5'. rcode = 12.
ENDCASE.
ENDIF.
exit. "end of do 1 times "
enddo.
* rollback if it didn't work
if not rcode is initial.
rollback work.
endif.
ENDFUNCTION.
8.
FUNCTION Z_3N_CKS_UNLOCK_USER.
""Local interface:
*" IMPORTING
*" VALUE(CKSUSRID) TYPE USR02-BNAME
*" EXPORTING
*" VALUE(RCODE) TYPE SY-SUBRC
CLEAR RCODE.
*{ PASSGOAPR06
*\ PERFORM UNLOCK_USER IN PROGRAM ZSAPMS01J USING CKSUSRID.
*\ IF SY-SUBRC <> 0.
*\ RCODE = SY-SUBRC.
*\ EXIT.
*\ ELSE.
*\ COMMIT WORK.
*\ ENDIF.
the report (form) is dumping.
so we try it with the correct BAPI
CALL FUNCTION 'BAPI_USER_UNLOCK'
EXPORTING
USERNAME = CKSUSRID
TABLES
RETURN = return
IF return-type <> 'S'.
RCODE = '8'.
rollback work.
EXIT.
ENDIF.
*} PASSGOAPR06
ENDFUNCTION.
9.
*& Include ZMS01JO10 *
MS01JO10 Module before Output
14.05.93
MODULE D150_SELECT *
Einen Eintrag aus der Liste uebernehmen. *
MODULE D150_SELECT OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
IF USRFLAG = 10 AND SY-LILLI = 3.
MESSAGE S209.
ELSE.
IF USRFLAG = 10.
XU150-VON = SY-LISEL.
ELSE.
COUNTX = PUSR - 1.
ASSIGN SY-LISEL+COUNTX(12) TO <TEXT>. " unicode
WRITE <TEXT> TO XU150-VON.
ENDIF.
ENDIF.
ENDIF.
SELE = 0.
ENDIF.
IF FERTIG = 2.
FCODE = 'BACK'.
SUPPRESS DIALOG.
ENDIF.
ENDMODULE.
MODULE D150_SETSTATUS *
PF-Status setzen *
MODULE D150_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 150.
XU150-SELPROF = XU150-SELFEST = XU150-SELADRE = XU150-SELPARA = 'X'.
XU150-SELMENU = 'X'.
ENDMODULE.
MODULE D155_SETSTATUS *
PF-Status setzen *
MODULE D155_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 155.
ENDMODULE.
MODULE D200_SELECT *
Einen Eintrag aus der Liste ins Dynpro uebernehmen *
MODULE D200_SELECT OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
XU200-XUSER = SY-LISEL.
ENDIF.
SELE = 0.
ENDIF.
IF FCODE2 = 'USER' OR FCODE2 = 'FEST' OR FCODE2 = 'ADRE' OR
FCODE2 = 'PARA' OR FCODE2 = 'ADMI' OR FCODE2 = 'RESE' OR
FCODE2 = 'N '.
SUPPRESS DIALOG.
ENDIF.
PERFORM SET_STATUS USING 200.
ENDMODULE.
MODULE D213_VALOUT *
Festwerte auf das Dynpro schreiben. *
MODULE D213_VALOUT OUTPUT.
DEL = 0.
XU213-DIA = '.'.
XU213-ODC = '.'.
XU213-BDC = '.'.
XU213-CPIC = '.'.
XU213-BATCH = '.'.
CASE USR02-USTYP.
WHEN TYPDIA.
XU213-DIA = 'X'.
WHEN TYPBATCH.
XU213-BATCH = 'X'.
WHEN TYPCPIC.
XU213-CPIC = 'X'.
WHEN TYPBDC.
XU213-BDC = 'X'.
WHEN TYPODC.
XU213-ODC = 'X'.
ENDCASE.
IF USR02-LTIME <> SPACE AND USR02-LTIME <> '000000'.
LOOP AT SCREEN.
CASE SCREEN-GROUP1.
WHEN 'MOD'.
SCREEN-INVISIBLE = '1'.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDCASE.
ENDLOOP.
SET CURSOR FIELD 'USR02-CLASS'.
IF F <> ' ' AND L <> 0.
SET CURSOR FIELD F LINE L.
ENDIF.
CODEFLAG = 1.
ELSE.
CLEAR XU213-BCODE.
CLEAR XU213-BCODE2.
IF USR02-BCODE <> '0000000000000000' AND BCODE_C = SPACE.
CODEFLAG = 0.
ENDIF.
IF CODEFLAG = -2.
SET CURSOR FIELD 'XU213-BCODE'.
MESSAGE S290.
ELSE.
SET CURSOR FIELD 'USR02-CLASS'.
IF F <> ' ' AND L <> 0.
SET CURSOR FIELD F LINE L.
ENDIF.
ENDIF.
ENDIF.
ENDMODULE.
MODULE D213_SELECT *
Einen Eintrag aus der Liste uebernehmen. *
MODULE D213_SELECT OUTPUT.
IF SELE = 1.
IF SY-LILLI < 4.
MESSAGE S209.
ELSE.
ASSIGN SY-LISEL(PROFLNG) TO <TEXT>.
MOVE <TEXT> TO XU213-PROFILE.
PERFORM AUTH_CHECK USING OBJ_PROF
XU213-PROFILE SPACE ACT_INCLUDE RC.
IF RC <> 0.
MESSAGE S478 WITH XU213-PROFILE.
ELSE.
FOUND = 0.
LOOP AT TABUSR.
IF TABUSR-PROFILE = XU213-PROFILE.
FOUND = 1.
MESSAGE S268 WITH XU213-PROFILE.
EXIT.
ENDIF.
ENDLOOP.
IF FOUND = 0.
PERFORM EXIST_USR10
USING XU213-PROFILE AKTIVATED SPACE RC.
CLEAR TABUSR.
TABUSR-PROFILE = XU213-PROFILE.
IF USR10-TYP = COLECTPROF.
TABUSR-SAMPROF = 'X'.
ENDIF.
Profiletext lesen
CLEAR USR11.
SELECT SINGLE * FROM USR11
WHERE LANGU = SY-LANGU
AND PROFN = TABUSR-PROFILE
AND AKTPS = AKTIVATED.
TABUSR-PTEXT = USR11-PTEXT.
APPEND TABUSR.
XU213-FILL = XU213-FILL + 1.
IF XU213-FILL >= MAXUSR.
MESSAGE S269.
ENDIF.
UCHANGE = 1.
PERFORM NOTSAVED.
ENDIF.
ENDIF.
ENDIF.
SELE = 0.
ENDIF.
PERFORM SET_STATUS USING 213.
PERFORM MESSAGE.
IF EXT_SECURITY <> '1'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'EXT'.
SCREEN-INPUT = '0'.
SCREEN-INVISIBLE = '1'.
SCREEN-ACTIVE = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMODULE.
MODULE D213_PROFOUT *
Profiles auf den Bildschirm ausgeben. *
MODULE D213_PROFOUT OUTPUT.
include <symbol>.
COUNTX = XU213-TOPIX + SY-STEPL - 1. "Bild-oben-Pos. in Tab. feststell
IF COUNTX <= XU213-FILL. "Am Ende der Tabelle ?
READ TABLE TABUSR INDEX COUNTX. "Tab. lesen
IF SY-SUBRC = 0.
MOVE-CORRESPONDING TABUSR TO XU213. "Daten auf den Bildschirm
xu213-samprof = sym_documents.
ENDIF.
ENDIF.
USRLOOP = SY-LOOPC.
ENDMODULE.
MODULE D254_SUPPRESS *
Dialog fuer Dynpro 254 unterdruecken *
MODULE D254_SUPPRESS OUTPUT.
SUPPRESS DIALOG.
ENDMODULE.
MODULE D310_SETSTATUS *
PF-Status setzen *
MODULE D310_SETSTATUS OUTPUT.
IF SHOW_ONLY = SPACE.
PERFORM SET_STATUS USING 310.
IF STATFLAG = 1.
LOOP AT SCREEN.
IF SCREEN-NAME = 'USR01-CATTKENNZ '.
AUTHORITY-CHECK OBJECT 'S_DEVELOP'
ID 'DEVCLASS' DUMMY
ID 'OBJTYPE' FIELD 'SCAT'
ID 'OBJNAME' DUMMY
ID 'P_GROUP' DUMMY
ID 'ACTVT' FIELD '70'.
IF SY-SUBRC <> 0.
SCREEN-INPUT = 0.
SCREEN-INVISIBLE = 1.
MODIFY SCREEN.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.
ELSE.
PERFORM SET_STATUS USING 330.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'RO '.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
CLEAR FCODE.
ENDMODULE.
MODULE D310_FORMAT_OUT. *
Datumsformat und Dezimalpunktformat entsprechend Daten aus usr01 *
ankreuzen. *
MODULE D310_FORMAT_OUT OUTPUT.
XU310-DATFM1 = ' '.
XU310-DATFM2 = ' '.
XU310-DATFM3 = ' '.
XU310-DATFM4 = ' '.
XU310-DATFM5 = ' '.
XU310-DCPFM1 = ' '.
XU310-DCPFM2 = ' '.
XU310-SPDB1 = ' '.
XU310-SPDA1 = ' '.
IF USR01-DATFM < 1 OR USR01-DATFM > 5.
CALL 'C_SAPGPARAM'
ID 'NAME' FIELD 'zcsa/moddatfm'
ID 'VALUE' FIELD USR01-DATFM.
ENDIF.
CASE USR01-DATFM.
WHEN 1.
XU310-DATFM1 = 'X'.
WHEN 2.
XU310-DATFM2 = 'X'.
WHEN 3.
XU310-DATFM3 = 'X'.
WHEN 4.
XU310-DATFM4 = 'X'.
WHEN 5.
XU310-DATFM5 = 'X'.
WHEN OTHERS.
XU310-DATFM1 = 'X'.
ENDCASE.
IF USR01-DCPFM = ' '.
XU310-DCPFM1 = 'X'.
ELSE.
XU310-DCPFM2 = 'X'.
ENDIF.
IF USR01-SPDB = 'G'.
XU310-SPDB1 = 'X'.
ENDIF.
IF USR01-SPDA = 'D'.
XU310-SPDA1 = 'X'.
ENDIF.
CLEAR TSP03.
SELECT SINGLE * FROM TSP03
WHERE PADEST = USR01-SPLD.
ENDMODULE.
MODULE D320_SETSTATUS *
PF-Status setzen *
MODULE D320_SETSTATUS OUTPUT.
IF SHOW_ONLY = SPACE.
PERFORM SET_STATUS USING 320.
ELSE.
PERFORM SET_STATUS USING 340.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'RO '.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
CLEAR FCODE.
ENDMODULE.
MODULE D330_SETSTATUS *
PF-Status setzen *
MODULE D330_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 330.
ENDMODULE.
MODULE D340_SETSTATUS *
PF-Status setzen *
MODULE D340_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 340.
ENDMODULE.
MODULE D350_SETSTATUS *
PF-Status setzen *
MODULE D350_SETSTATUS OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
TABPAR-PARID = SY-LISEL.
APPEND TABPAR.
PARFILL = PARFILL + 1.
ENDIF.
SELE = 0.
ENDIF.
IF SHOW_ONLY = SPACE.
PERFORM SET_STATUS USING 350.
ELSE.
PERFORM SET_STATUS USING 360.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'RO '.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
CLEAR FCODE.
ENDMODULE.
MODULE D350_PAROUT *
Parameter auf den Bildschirm ausgeben. *
MODULE D350_PAROUT OUTPUT.
COUNTX = PARTOPIX + SY-STEPL - 1. "Bild-oben-Pos. in Tab. feststell
IF COUNTX <= PARFILL. "Am Ende der Tabelle ?
READ TABLE TABPAR INDEX COUNTX. "Tab. lesen
IF SY-SUBRC = 0.
MOVE-CORRESPONDING TABPAR TO XU350. "Daten auf den Bildschirm
SELECT SINGLE * FROM TPARAT
WHERE SPRACHE = SY-LANGU
AND PARAMID = TABPAR-PARID.
ENDIF.
ENDIF.
PARLOOP = SY-LOOPC.
ENDMODULE.
MODULE D351_SETSTATUS *
PF-Status setzen *
*ODULE D351_SETSTATUS OUTPUT.
IF SELE = 1.
IF SY-LILLI < 3.
MESSAGE S209.
ELSE.
XU350-PARID = SY-LISEL.
ENDIF.
SELE = 0.
ENDIF.
PERFORM SET_STATUS USING 352.
SUPPRESS DIALOG.
*NDMODULE.
MODULE D360_SETSTATUS *
PF-Status setzen *
MODULE D360_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 360.
ENDMODULE.
MODULE D390_STATUS *
PF-Status setzen. *
MODULE D390_STATUS OUTPUT.
data uflag_x type x. " unicode
SELECT SINGLE * FROM USR02
WHERE BNAME = XU200-XUSER.
uflag_x = USR02-UFLAG. " unicode
IF SY-SUBRC <> 0.
XU390-STATTEXT = ' Nicht vorhanden.'(222).
ELSE.
IF uflag_x Z YULOCK AND uflag_x Z YUSLOC. " unicode
PERFORM SET_STATUS USING 390.
XU390-STATTEXT = ' Nicht gesperrt. '(223).
ELSE.
IF uflag_x O YULOCK. " unicode
PERFORM SET_STATUS USING 391.
XU390-STATTEXT = ' Durch Falschanmeldungen gesperrt !!!'(224).
ENDIF.
IF uflag_x O YUSLOC. " unicode
PERFORM SET_STATUS USING 391.
XU390-STATTEXT = ' Durch Systemmanager gesperrt !!!'(225).
ENDIF.
ENDIF.
ENDIF.
LOCK = '.'.
UNLO = '.'.
ENDMODULE.
MODULE D400_CLEAR_CODE *
Passwortfeld loeschen. *
MODULE D400_CLEAR_CODE OUTPUT.
CLEAR XU400-NEWCODE.
CLEAR XU400-NEWCODE1.
ENDMODULE.
MODULE D400_SETSTATUS *
PF-Status setzen *
MODULE D400_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 400.
ENDMODULE.
MODULE D500_SUPPRESS *
Dynpro unterdruecken *
MODULE D500_SUPPRESS OUTPUT.
SET PF-STATUS '0200'.
SUPPRESS DIALOG.
ENDMODULE.
*& Module D214_SETSTATUS OUTPUT
MODULE D214_SETSTATUS OUTPUT.
SET PF-STATUS '0214'.
SET TITLEBAR '214'.
ENDMODULE. " D214_SETSTATUS OUTPUT
*& Module D216_PROFOUT OUTPUT
MODULE D216_PROFOUT OUTPUT.
COUNTX = XU213-TOPIX2 + SY-STEPL - 1. "Bild-oben-Pos. in Tab. festst
IF COUNTX <= XU213-FILL2. "Am Ende der Tabelle ?
READ TABLE INTPRO2 INDEX COUNTX. "Tab. lesen
IF SY-SUBRC = 0.
MOVE-CORRESPONDING INTPRO2 TO XU213. "Daten auf den Bildschirm
ENDIF.
ENDIF.
ENDMODULE. " D216_PROFOUT OUTPUT
*& Module D504_STATUS OUTPUT
MODULE D504_STATUS OUTPUT.
SET PF-STATUS '0504'.
SET TITLEBAR '604'.
ENDMODULE. " D504_STATUS OUTPUT
*& Module D217_SETSTATUS
MODULE D217_SETSTATUS OUTPUT.
PERFORM SET_STATUS USING 217.
PERFORM MESSAGE.
IF FERTIG = -1.
SUPPRESS DIALOG.
ENDIF.
ENDMODULE. " D217_SELECT OUTPUT
*& Module D202_SETSTATUS OUTPUT
text *
MODULE D202_SETSTATUS OUTPUT.
SET PF-STATUS '0203'.
SET TITLEBAR '203'.
ENDMODULE. " D202_SETSTATUS OUTPUT
*& Module D200_LESEN_MEMORY OUTPUT
Schnittstelle mit RSUSR008
call transaction su01 and skip first screen
MODULE D200_LESEN_MEMORY OUTPUT.
IMPORT FCODE FROM MEMORY ID 'OK_CODE'.
EXPORT FCODE FROM SPACE TO MEMORY ID 'OK_CODE'.
ENDMODULE. " D200_LESEN_MEMORY OUTPUT
"$$
10.
*& Report ZSAPMS01J *
23.10.92
set extended check off.
INCLUDE ZMS01JTOP.
*INCLUDE MS01JTOP. "Datendeklarationen
INCLUDE ZMS01JO10.
*INCLUDE MS01JO10. "PBO-Module
*INCLUDE ZMS01JI10.
INCLUDE MS01JI10. "PAI-Module
*INCLUDE ZMS01JF10.
INCLUDE MS01JF10. "Forms
*INCLUDE ZMS01JR10.
INCLUDE MS01JR10. "Reporting
*INCLUDE ZMS01CC10.
INCLUDE MS01CC10. "Checks
*INCLUDE ZMS01CD10.
INCLUDE MS01CD10. "Datenzugriffe
set extended check on.
see there are in total 10 prog that should go in one trasport order. this will creat data file and co file. these are flat files. i want these flat files.
do it in developement server or testing server and then delete it or revert it once you get data file or co file.
i will greatful to u if you could send me these flat files.
thanx in advance
raj

hi all,
this can be done in 4.6 version also.
thanx for spending time on this.
thanx&regards
raj

How can i make shorten systemlog files and joblog files on OS

Hello
How can i make shorten systemlog files and joblog files on OS

Hello Jan,
You can limit the size of system log.
The size of the application server's System Log is determined by the
following SAP profile parameters. Once the current System Log reaches
the maximum file size, it gets moved to the old_file and and a new
System Log file gets created. The number of past days messages in the
System Log depends on the amount/activity of System Log messages and the
max file size. Once messages get rolled off the current and old files,
they are no longer retrievable.
rslg/local/file /usr/sap/<SID>/D*/log/SLOG<SYSNO>
rslg/local/old_file /usr/sap/<SID>/D*/log/SLOGO<SYSNO>
rslg/max_diskspace/local 1000000
rslg/central/file /usr/sap/<SID>/SYS/global/SLOGJ
rslg/central/old_file /usr/sap/<SID>/SYS/global/SLOGJO
rslg/max_diskspace/central
Refer to http://help.sap.com/saphelp_nw70/helpdata/EN/c7/69bcbaf36611d3a6510000e835363f/content.htm
for explanation of profile parameters.you can reduce the size of system log using rslg/max_diskspace_local and rslg/max_diskspace_central
But you can't reduce the size of job log files on OS
Rohit

Installing Windows 7, 8 and 8.1 using ISOs, Answer Files and Driver files over PXE boot

I have a validation lab that uses Windows 7, 8 and 8.1 on several completely different systems. I am looking for an easy way for the techs to PXE boot from a 2012 Server, select the OS to install and have the OS installed with drivers so when they come back
to the system it has the OS installed with no Bangs in Device Manager.
I have done this in the past (7-8 years ago) and it was fairly easy. Now from what I read it appears I have to create "Image" files for each system type? I hope I am misreading this because that method is counter-productive to create 10 different
images for 10 different systems.
I thought I used WDS and AIK on a 2K3 Server but I don't remember.
Is there a method/tool to install the operating systems as I described above using original OS ISOs, unattended answer files and driver files? WDS or SCCM? AM I misreading how it works?

Consider using newer Windows ADK
http://www.microsoft.com/en-us/download/details.aspx?id=39982

Table files and Index files 2GB on Windows 2003 Server SP2 32-bit

I'm new to Oracle and I've ran into the problem where my Table files and Index files are > 2GB. I have an Oracle instance running version 10.2.0.3.0. I have a number of tables file and index files that have a current files size of 1.99GB. My Oracle crashes about three times a week because of a "Write Fault/Failure. I've detemined that the RDBM is trying to write a index or table files > 2GB. When this occurs it crashes.
I've been reading the Oracle knowledge base that it suggest that there is a fix or release of Oracle 10g to resolve this problem. However, I've been unable to locate any fix or release to address my issue. Does such a fix or release exist? How do I address this issue? I'm from the world of MS SQL and IBM DB2 and we don't have this issue. I am running and NTFS files system. Could this be issue be related to an Windows Fix?
Surely Oracle can handel databases > 2GB.
Thanks in advance for any help.

After reading your response it appears that my real problem has to do with checking pointing. I've included below a copy of the error message:
Oracle process number: 8
Windows thread id: 3768, image: ORACLE.EXE (CKPT)
*** 2008-07-27 16:50:13.569
*** SERVICE NAME:(SYS$BACKGROUND) 2008-07-27 16:50:13.569
*** SESSION ID:(219.1) 2008-07-27 16:50:13.569
ORA-00206: Message 206 not found; No message file for product=RDBMS, facility=ORA; arguments: [3] [1]
ORA-00202: Message 202 not found; No message file for product=RDBMS, facility=ORA; arguments: [D:\ELLIPSE_DATABASE\CONTROL\CTRL1_ELLPROD1.CTL]
ORA-27072: Message 27072 not found; No message file for product=RDBMS, facility=ORA
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
error 221 detected in background process
ORA-00221: Message 221 not found; No message file for product=RDBMS, facility=ORA
ORA-00206: Message 206 not found; No message file for product=RDBMS, facility=ORA; arguments: [3] [1]
ORA-00202: Message 202 not found; No message file for product=RDBMS, facility=ORA; arguments: [D:\ELLIPSE_DATABASE\CONTROL\CTRL1_ELLPROD1.CTL]
ORA-27072: Message 27072 not found; No message file for product=RDBMS, facility=ORA
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
Can you tell me why I'm having issues with checking point and the control file?
Can I rebuild the control file if it s corrupt?
The problem has been going on since April 2008. I'm takening over the system.
Thanks

Enable video file and image file thumbnails WITHOUT enabling thumbnails for other filetypes

Hello. I am new to Mac and pulling my hair out at some of the limited UI options
I am wanting my image-files and video-files to appear in Finder (desktop etc) as thumbnails
However, I DON'T want PDFs, Excel, Word, PowerPoint files to have a preview thumbnail
Basically how things are now either way, it's very cumbersome visually to distinguish between file-types while cruising around my folders with a quick glance.
if thumbnail previews are on for all, its hard to tell at a quick glance which are PDFs, Excel files vs. images
similarly, the little "pdf" or "xlsx" or "docx" text overlay on these previews is so small and non-color coded as to be useless for quick-glance recognition of which filetype
if thumbnails are off, it's impossible to glance at files in a folder and know which image or video each is without wasting my precious miliseconds clicking on them, or trying to actually read truncated filenames
Here are some possible solutions which I hope somebody knows how to do:
globally enable or disable icon previews by filetype (preferred)
stipulate adding overlayed mini icons to certain filetypes
example: if it's a pdf, show the icon preview, but overlayed on that would be the red Adobe pdf icon/logo roughly a quarter of the size of the file icon (like is possible in Windows 7).
this way image and video previews can be seen at a glance, but having a big red or green or blue logo makes for immediate recognition of filetype
(least prefered but could help) ...somehow change the font color and increase the font size of the overlayed "pdf" "xlsx" "doc" "pptx"currently standard on these filetypes while showing icon preview but ALL are miniscule black text no matter which filetype
I'm quite dumbfounded right now that something for better immediate-glance filetype recognition isn't standard, or at least easily Google'able. All I've found is the Either/Other bamboozle.
Would love it to hear of a solution for this. Thanks all.

Put all of your separate flash movies into one move, and then
use flash to
load the movies into a top section of the flash document.
Your site (this page) sounds like it would be best viewed
entirely in Flash
(at least easiest w/o reloading).
Jon
"zachmundy" <[email protected]> wrote in
message
news:earmgn$q95$[email protected]..
>I have a bunch of flash videos that i've created
thumbnails for. I have
>one
> big cell on the top of the page that displays a video
and a bunch of small
> cells below that hold the thumbnails and descriptions of
other videos.
> When a
> user clicks on one of the videos, I want it to load that
video into the
> large
> cell on the top of the page all without
regenerating/refreshing the page.
> Is
> this possible in dreamweaver? What do I need to code the
thumbnail
> buttons to
> do in order to make this happen?
> Thanks
>

Hi apple users, I am in need of your expertise. I have a mov file and mp4 file which I need converted to DVD. However IDVD quality is terrible and wondering if anyone can help!?

Hi apple users, I am in need of your expertise. I have a mov file and mp4 file which I need converted to DVD. However IDVD quality is terrible and wondering if anyone can help!?
I created project in iMovie then exported it to MP4 and also MOV file at highest definition possible + I added it to iDVD and had a number issues about encoding errors regarding the mp4 file. MOV worked but the quality was terrible.....
MOV file is as follows:
4.08GB
Codecs: H.264, ACC
Colour Profile: HD (1-1-1)
Dimensions: 1920 x 1080
Duration: 12:33
Audio Channels: 2
MP4 File is as follows:
3.02GB
Codecs: H.264, ACC
Colour Profile: HD (1-1-1)
Dimensions: 1280 x 720
Duration: 12:33
Audio Channels: 6
I have a MacBook Pro using the Yosemite system upgrade.
I have updated iDVD and iMovie.
I even bought the iSkysoft app from the mac store and that was terrible too.
PLEASE HELP i am getting desperate and about to launch this macbook into the air
2.66 GHz Intel Core i7
Version 10.10. 2

First of all, Hunt--thanks for responding!
"First, where are you playing the MPEG-2, that you see that jitter?"
On both a MacBook Pro, an Acer laptop and my Mac Tower. I would love to think that it is a problem with the playback system, and that if I merely send the file off to the duplicator they won't have the same problem. Maybe that is the case...I don't know if I have a choice rather than sending it off to see. But it happens in the same spots, in the same way, on all three of the players so I'm a little reluctant to have faith.
"Another thing that can cause jitter in an MPEG-2 is the Bit-Rate - higher the Bit-Rate, the better the quality, but the larger the file. For a DVD, one is limited by the total Bit-Rate (both Audio & Video), but with longer prodcutions, some users choose too low a Bit-Rate. If this is the issue, one would need to go back to the original Project and do a new Export/Share."
Of course, but in the case there is no more 'original project.' It is gone like the wind, stolen along with his computer and backups.
I think I am stuck using one of two files as my master: a DVD he burned where I only see the stutter/vibration/jitter once, or the mpeg2 file where I see it three times. Hopefully, the duplication house can rip if off of one of them and not see the jitter. I know that in audio, my personal filed, you can do a lot to enhance already existing sound--EQ, compression, tape saturation emulation software, etc. I guess I'm hoping there is some kind of analog to the video world that address jitter after a source has been printed--if indeed the source has been printed to be jittery.
Thanks,
Doug

System Center 2012 R2 install: SQL server Data file and log file

This might be a dumb question, but I can't find the answer anywhere.
I'm installing a new instance of System Center 2012 R2 on a new server, I'm stuck on the SQL Server data file section. Everytime I put in a path, it says that tne path does not exist. I'm I supposed to be creating some sort of SQL Server
data file and log file before this installation, I didn't get this prompt when installing System Center 2012 SP1 or hen I upgraded from System Center 2012 SP1 to System Center 2012 R2
My SQL is on a different server
Thank you in advanced

Have you reviewed the setup.log?
On a side note, why would you put the database file on the same drive as the OS? That defeats the whole purpose of having a remote SQL Server. Why use a remote SQL Server in the first place.
Jason | http://blog.configmgrftw.com

EXPDP generates new dmp file and reports "file already exists" error

Similar Messages

Maybe you are looking for