Expdp impdp fails from 10g to 11g db version

Hello folks,
Export DB Version : 10.2.0.4
Import DB Version : 11.2.0.1
Export Log File
Export: Release 10.2.0.4.0 - Production on Wednesday, 03 November, 2010 2:19:20
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, Data Mining and Real Application Testing options
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 45 GB
. . exported "DYM"."CYCLE_COUNT_MASTER" 39.14 GB 309618922 rows
Master table "DYM"."SYS_EXPORT_SCHEMA_01" successfully loaded/unloaded
Dump file set for DYM.SYS_EXPORT_SCHEMA_01 is:
Job "DYM"."SYS_EXPORT_SCHEMA_01" successfully completed at 02:56:49
Import Log File
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "DYM_PRJ4"."CYCLE_COUNT_MASTER" failed to load/unload and is being skipped due to error:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at 10:54:38
from 10g expdp to 11g impdp is not allowed ? any thoughts appreciated ??

Nope , I do not see any error file.
Current log# 2 seq# 908 mem# 0:
Thu Nov 04 11:58:20 2010
DM00 started with pid=530, OS id=1659, job SYSTEM.SYS_IMPORT_FULL_02
Thu Nov 04 11:58:20 2010
DW00 started with pid=531, OS id=1661, wid=1, job SYSTEM.SYS_IMPORT_FULL_02
Thu Nov 04 11:58:55 2010
DM00 started with pid=513, OS id=1700, job SYSTEM.SYS_IMPORT_FULL_02
Thu Nov 04 11:58:55 2010
DW00 started with pid=520, OS id=1713, wid=1, job SYSTEM.SYS_IMPORT_FULL_02
Thu Nov 04 12:00:54 2010
Thread 1 cannot allocate new log, sequence 909
Private strand flush not complete
Current log# 2 seq# 908 mem# 0: ####################redo02.log
Thread 1 advanced to log sequence 909 (LGWR switch)
Current log# 3 seq# 909 mem# 0: ###################redo03.log
Thu Nov 04 12:01:51 2010
Thread 1 cannot allocate new log, sequence 910
Checkpoint not complete
Current log# 3 seq# 909 mem# 0:###################redo03.log

Similar Messages

Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]

Hi Deepak/Folks,
Another question that I have is that while doing the Oracle Upgrade on an EP server, the patches were not installed properly and I had to shut down the Patches installation after it did not do anything for a while.
Now when I try to install the patches it fails telling me that the Installed patches cannot be verified, I had written to SAP and they told me to follow the
SAP note 1862446 - Inventory
load failed... OPatch cannot load inventory for the given Oracle Home
and re-create the oracle inventory.
This has also not helped in anyway.
Is there a solution to this problem.
Following is the error that I am getting when I try to Install the patches
Getting pre-run patch inventory...
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory.
Refer to log file
$ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-14-52-51.log
when I open the log file specified here I get the following
more mopatch-2014_08_06-14-52-51.log
more /oracle/<SID>/11203/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
MOPatch - Install Multiple Oracle Patches in One Run - 2.1.15.
Copyright (c) 2007, 2013, Oracle and/or its affiliates. All rights reserved.
Version:       2.1.15
Revision:      5.1.2.26
Command-line: /oracle/<SID>/11203/MOPatch/mopatch.sh -v -s SAP11203P_1312-20009978.zip
Oracle Home:   /oracle/<SID>/11203
RDBMS version: 11.2.0.3.0
OPatch version:11.2.0.3.3
Clean-up:      supported
PSUs:          supported
Log file:      $ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2014_08_06-15-01-51.log
Patch base:    .
Patch source: SAP11203P_1312-20009978.zip
Link script:   ./link.mts<SID>ua.sh
Readmes:       <none>
Strpd. Readmes:<none>
make utility: /usr/ccs/bin/make
unzip utility: /oracle/<SID>/11203/bin/unzip
User name:     ora<SID>
Working dir:   /oracle/stage
System:        HP-UX mts<SID>ua B.11.31 U ia64 2468369872 unlimited-user license
Disk free:     11734549 KBytes on /oracle/<SID>
Disk required: 886496 KBytes on /oracle/<SID>
Getting pre-run patch inventory...
executing: "/oracle/<SID>/11203/OPatch/opatch" lsinventory -retry 0 -xml "./mopatch-187-21696-tmpdir/preinv.xml"
========================================================
GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
========================================================
Oracle Interim Patch Installer version 11.2.0.3.3
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home       : /oracle/<SID>/11203
Central Inventory : /oracle/<SID>/oraInventory
   from           : /oracle/<SID>/11203/oraInst.loc
OPatch version    : 11.2.0.3.3
OUI version       : 11.2.0.3.0
Log file location : /oracle/<SID>/11203/cfgtoollogs/opatch/opatch2014-08-06_15-01-56PM_1.log
List of Homes on this system:
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
Possible causes are:
   Oracle Home dir. path does not exist in Central Inventory
   Oracle Home is a symbolic link
   Oracle Home inventory is corrupted
LsInventorySession failed: OracleHomeInventory gets null oracleHomeInfo
OPatch failed with error code 73
Getting pre-run patch inventory...failed.
Cannot get pre-run patch inventory. Exiting.
I would appreciate if you folks can help me out on this
Thanks
APS

FOLLOW UP QUESTION BRANCHED:
Oracle Upgrade from 10g to 11g [BRANCHED BY MODERATOR]

Error while migrating from 10g to 11g

Hi
I am migrating a bpel process wit partner link activity from 10g to 11g
I got an error.It says there is no composite file in the process .so, migration is filed.
Pls help me...

Hi Eric,
Thanks for the reply.Here is the info in the logfile.
INFO: UPGBPEL-02036: Starting migration for source projects in the list : "C:\jdevstudio10131\jdev\mywork\myBPELApplication\PickDemo.backup.backup"
INFO: UPGBPEL-02029: Backed up source contents can be found in: "C:\jdevstudio10131\jdev\mywork\myBPELApplication\PickDemo.backup.backup.backup"
INFO: UPGBPEL-02007: Using source directory list: "C:\jdevstudio10131\jdev\mywork\myBPELApplication\PickDemo.backup.backup\bpel"
INFO: UPGBPEL-02008: Using target directory: "C:\jdevstudio10131\jdev\mywork\myBPELApplication\PickDemo.backup.backup"
INFO: UPGBPEL-02047: Upgrade messages are available in log file : "C:\OFM\jdev_home\jdeveloper\\upgrade\logs\PickDemo.backup.backup2010-08-16-15-43-33PM.log"
INFO: Suitcase directory is C:\jdevstudio10131\jdev\mywork\myBPELApplication\PickDemo.backup.backup\bpel
INFO: There are 0 task files in the suitcase
INFO: No more than one .task file in the upgrade source directory and hence not upgrading the bpel src
INFO: UPGBPEL-02041: Retrieving wsdl for partnerLink "AsyncWait" from "http://xppro:8888/orabpel/default/AsyncWait/AsyncWait?wsdl". This wsdl location can be used later for any manual setup of composite reference binding, if the upgrade plan includes using 1013x endpoints for the interim.
SEVERE: Upgrade failed. Check the logs for any exceptions. Ensure that the WSDL URLs specified in the project are reachable and a valid 10.1.3.x project is used for upgrade. Before re-attempting upgrade, restore the original project code source from the backup directory.
java.net.ConnectException: Connection refused: connect
     at oracle.viewgen.plugin.bpel.BPELPlugin.createComponentType(BPELPlugin.java:172)
     at oracle.viewgen.ViewGenerator.main(ViewGenerator.java:223)
Caused by: oracle.j2ee.ws.wsdl.LocalizedWSDLException: WSDLException: faultCode=PARSER_ERROR: Failed to read wsdl file at: "http://xppro:8888/orabpel/default/AsyncWait/AsyncWait?wsdl", caused by: java.net.ConnectException. : java.net.ConnectException: Connection refused: connect
     at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:371)
     at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:615)
     at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:258)
     at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:229)
     at oracle.viewgen.wsdl.WSDLUtil.getWSDL(WSDLUtil.java:60)
     at oracle.viewgen.componentType.bpel.BpelDDUtil.checkAndUpdateBPELDD(BpelDDUtil.java:477)
     at oracle.viewgen.plugin.bpel.BPELPlugin.createComponentType(BPELPlugin.java:107)
     ... 1 more
Caused by: java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:525)
     at java.net.Socket.connect(Socket.java:475)
     at java.net.Socket.<init>(Socket.java:372)
     at java.net.Socket.<init>(Socket.java:215)
     at javax.net.DefaultSocketFactory.createSocket(SocketFactory.java:212)
     at HTTPClient.HTTPConnection$EstablishConnection$2.run(HTTPConnection.java:4268)
     at HTTPClient.HttpClientConfiguration.doAction(HttpClientConfiguration.java:708)
     at HTTPClient.HTTPConnection.doAction(HTTPConnection.java:5379)
     at HTTPClient.HTTPConnection$EstablishConnection.run(HTTPConnection.java:4254)
i dont have any clue on this error.

.olb object library cannot open file in 11g - migration from 10g to 11g

I have an object library (.olb) that will not open in Foras 11.1.1.2.0. It opens fine in 10g. I have tried converting it to ascii (.olt) but it will not creat the binary filie in 11g - get PDE-PER001 Internal Error (cakaa 2) when I try to convert any ascii file from 10g into 11g.
I have tried using frmplsqlconv, the conversion tool on .olb but get following error when it is run: ERROR opening easstnd.olb :oracle.forms.jdapi.JdapiStatusException: Failed to load olb
Check subclass and library dependencies
Any help appreciated!
Kim

Kim,
We are not migrating yet, and we have not started converting all our forms and reports, but for the tests we have done, I never had to use frmplsqlconv (in fact, I don't know what it is). What I have done is:
1) As I told you before, I copied everything (forms, reports, etc.) we have to a new location.
2) I opened ALL the pll files with Builder 11g, saved them, and generated the plx files. The only problem I encountered here was that with some plls, Forms Builder crashed when opening them. I had to open those with Forms Builder 10g, and remove program units one by one until I found the culprit. After removing the program unit causing the crash, I opened the pll successfully with Forms Builder 11g, and created the program unit I had deleted.
3) After all plls were generated, I opened the forms I wanted to test, saved them, and generated the fmx files.
4) Same thing with reports (rdf and jsp files).
I have never gotten an error in Builder when closing plls, and we don't have either .fmt or .pld files.
Carlos

Application has problems when migrated from 10g to 11g

Hi there,
I am hoping someone can shed some light on a problem I have in moving an application from Oracle 10g to Oracle 11g. The app works fine on 10g (uses Apache webserver with PL/SQL module, and APEX 3.1.2.00.2), but on 11g using the embedded web server and APEX 3.2.0.00.27, it doesnt. Most of the app works fine, but there are a couple of pages that provide the ability to add child rows to a parent/child relationship, where the parameter passing mechanism from one page to the next appears to suffer from some sort of corruption. I have traced this using the "session" and "debug" buttons on the developer interface, which show that the values of the parameters get changed inexplicably, when branching from one page to the next - even when the page is actually branching to itself.
I am using the "Set these items, "With these values" fields in the branch, and have verified that the correct values are being associated with the correct items in the application builder. But while this does work correctly under 10g, with 11g, the wrong values end up being passed. Just prior to the branch the set of parameters have the correct values, but immediately after the branch, one of the values is NULL, another has the value of a different item, and a third has a totally random value - I have no idea were it comes from!
I migrated the application from 10g to 11g using the APEX application developer's Export/Import options. There have been no other changes. Should this have worked? If so, any ideas what might have gone wrong?
Thanks,
Sid.

Well, I managed to solve this, but not in a way that makes much sense.
In desperation (I had tried almost everything else!) I changed the value of "Cached" in the page settings from "No" to "Yes", and ran the app, but the page didnt render correctly (in either Firefox or IE7) - in fact all that displayed was the developers toolbar at the bottom of the page. I changed the value of "Cached" back to "Y", ran the app again, and hey presto - everything worked fine! I actually did this a second time with a fresh import of the app from 10g, just to be sure I wasnt seeing things. I wasnt!
There was just one further issue - everything worked fine apart from this section of code in a page process:-
ELSIF (:p9_filter_type = 5) THEN
IF (:p9_x_gene_list IS NOT NULL) THEN
:p9_filter := :p9_x_gene_list;
END IF;
:p9_entity_types := 'GENE';
END IF;
In 11g the value of :p9_entity_types was not being set to 'GENE' when :p9_filter_type was 5. This was (and still is) working in 10g. I changed the code as follows:-
ELSIF (:p9_filter_type = 5) THEN
:p9_entity_types := 'GENE';
IF (:p9_x_gene_list IS NOT NULL) THEN
:p9_filter := :p9_x_gene_list;
END IF;
END IF;
... and now it works fine in 11g as well.
Only wish I knew why!

Images after upgrade from 10g to 11g

We recently upgraded from 10g to 11g and all the images are broke in the dashboard.
Can anyone provide the steps needs to be done in order to fix the broken images?
Thanks.

Put image files at
Drive:\Oracle\Middleware\Oracle_BI1\bifoundation\web\app\res\s_blafp\images
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1\7dezjl\war\res\s_blafp\images
If required
Drive:\Oracle\Middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\tmp\.appmergegen_1291264099332\analytics.ear\ukjjdc\res\s_blafp\images
Call them using fmap
Syntax: fmap:images/imagename.imageformat
for e.g: fmap:images/geograph.jpg
Pls mark correct/helpful if helps

Check list for upgrading from 10g to 11g when there is a schema replication

Hi
We are looking to upgrade one of our production database from 10g to 11g
Currently this database has one schema that is replicated to 2 other databases using Oracle streams.
The replication is excluing DDLs and excluding several other application tables.
What should I do pre and post the upgrade ?
should we remove the stream configuration all together and rebuild it after the upgrade ?
I was hoping that we can first upgrade the two target databases to 11g and then the source database, without impacting our streams configuration at all
Is that possible ?
Is there any documentation on the subject ?
thanks in advance
Orna

Pl post the OS versions of the source and target servers, along with exact (4-digit) versions of "10g" and "11g". I do not have any experience with streams, but the 11gR2 Upgrade Doc suggests that you upgrade the downstream target databases first before upgrading the source - http://download.oracle.com/docs/cd/E11882_01/server.112/e10819/upgrade.htm#CIAFJJFC
HTH
Srini

.Database upgrade from 10g to 11g in Oracle EBS 11i

Hi,
An urgent help is needed.I am upgrading Oracle Database from 10g to 11g.My EBS is version 11i.So after upgrading my database
from 10g to 11g as sa sanity check what are the parameters we need to take care of the EBS.My point is will there be any Application level changes if the database
is upgraded?Wiill the Workflow and what other things we had to do the sanity check if its working properly?Any Concurent Program level changes be affected?
Thanks and Regards
Edited by: 918308 on May 10, 2013 7:52 PM

918308 wrote:
Hi,
Thanks for the info provided but i dont have the metalink id.Kindly can you provide me the link for the subjected docs so that i can relate.Any application level testing to be done?Concurrent Programs,Schedule Manager,Workflow etc.?We cannot post the contents of MOS docs since this violates Oracle support agreement policy.
You need to go a regular sanity check (i.e. submit concurrent programs, check workflow functionality, ..etc) -- E-Business Suite Diagnostics 11i Test Catalog [ID 179661.1]
Thanks,
Hussein

Error after upgrading BI Publisher report from 10g to 11g

Hi All,
I have migrated the BI Publisher from 10g to 11g. The upgrade was done using the upgrade assistant and the installation process was a success.
However whenever I try to access the reports in 11g after migration I get the following error:
oracle.xdo.servlet.CreateException: Data Model definition not found:/dlypurge.xdm.
I have tried modifying the .xdo to include the following:
<dataModel url="/RMS/dlypurge/dlypurge.xdm"/> where dlypurge is one of the reports. However in the BI Publisher does not seem to access the latest .xdo file.
Any suggestions on how to rectify the error.
Sanchita Chakrabarty

Hi All,
I have migrated the BI Publisher from 10g to 11g. The upgrade was done using the upgrade assistant and the installation process was a success.
However whenever I try to access the reports in 11g after migration I get the following error:
oracle.xdo.servlet.CreateException: Data Model definition not found:/dlypurge.xdm.
I have tried modifying the .xdo to include the following:
<dataModel url="/RMS/dlypurge/dlypurge.xdm"/> where dlypurge is one of the reports. However in the BI Publisher does not seem to access the latest .xdo file.
Any suggestions on how to rectify the error.
Sanchita Chakrabarty

Facing Parse Errors after upgrading database from 10g to 11g

Hi,
We are facing parse errors in the SQL's after upgrading database from 10g to 11g.
Kindly look into below parse errors.
********************************** Parse Error *****************************************************
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Tue Aug 13 14:13:10 2013
kksfbc 16173533: parse err=942 hd=3c387c4028 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
Select feature from toad.toad_restrictions where user_name=USER or user_name in ( select ROLE from sys.session_roles)
kksfbc 16173533: parse err=942 hd=3c97d83648 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT password
FROM SYS.USER$
WHERE 0=1
kksfbc 16173533: parse err=6550 hd=35185e4278 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        30 anonymous block
319e277050        57 anonymous block
PARSE ERROR: ospid=29813, error=6550 for statement:
BEGIN sys.dbms_profiler."146775420110782746251362632012"; END;
kksfbc 16173533: parse err=942 hd=3c142d8600 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        67 anonymous block
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT 1 FROM plsql_profiler_data WHERE 0 = 1
Please help.
Regards
Suresh

Hi Suresh,
Apologies for misunderstanding..
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Assuming you see the above error message in the alert log file, which was your original post, follow the below steps:
1 Get the 'ospid' value from the error
2. Issue the below command:
SQL> select request_id,ORACLE_PROCESS_ID
2 from fnd_concurrent_requests
3 where request_id = 15598;
3. After obtaining the request_id
4, Query it from the front-end using SYSADMIN responsibility
Hopefully this should get you the respective concurrent report/program.
Thanks &
Best Regards,

ODI Procedures not working after upgrading from 10G to 11G

Hello Gurus,
We have run into a scenario where the procedures in ODI are not working after we upgraded it from 10G to 11G (11.1.1.6). However we can make it to run if we create the procedure from scratch.
Also we are having issues related to packages where in the packages were running before we applied the patch 11.1.1.6.3. And after applying the patches they are not running.
Any help will be appreciated.
Thanks

If you want someone to help you, please be elaborate in the exact errors you are getting.
A general statement would do nothing but guess work.
What is the error that you get while executing the procedure.
What are the exact issues that you get while executing packages ?

Report Navigation Issue after upgrading from 10g to 11g

Hi Experts
I have recently upgarded my solution from 10g to 11g. Issue is when I click on column value for navigation it doen't navigate the display remains unchanged
1) I have created new dashboard and placed this report in new dashboard the navigation works fine.
2) I have created new report and placed that report in old dashboard it doesn't work
why is it so I undertand that there is problem with Dashboard and not with report but I am unable to figure it out
what can be the problem? any suggestions
Thanks
Sameer

Hi Experts
I have recently upgarded my solution from 10g to 11g. Issue is when I click on column value for navigation it doen't navigate the display remains unchanged
1) I have created new dashboard and placed this report in new dashboard the navigation works fine.
2) I have created new report and placed that report in old dashboard it doesn't work
why is it so I undertand that there is problem with Dashboard and not with report but I am unable to figure it out
what can be the problem? any suggestions
Thanks
Sameer

Unable to Sign in analytics After Upgraded obiee from 10g to 11g

Hi all,
I have problem when upgrading catalog from 10g to 11g.
The error is:" Unable to Sign In . An invalid User Name or Password was entered. "
I upgraded following the steps like this:
1.Login EM and check BI server is running successfully.
2.Started the UA.bat.
Select the operation:Upgrade Oracle BI RPD and Web Catalog.
Step by Step,and the upgrade completed successfully.
3.Open the RPD online using the Admintool succefully.
4.But when I Login the BI and view the dashboard with the 10g's user (Administrator),the page appear the error "*Unable to Sign In . An invalid User Name or Password was entered.* "
5.Then I Try to Regenerating User GUIDs
1. Update the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter in NQSConfig.INI:
a. Open NQSConfig.INI for editing at:
b. ORACLE_INSTANCE/config/OracleBIServerComponent/coreapplication_obisn
c. Locate the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter and set it to YES, as follows:
d. FMW_UPDATE_ROLE_AND_USER_REF_GUIDS = YES;
e. Save and close the file.
2. Update the Catalog element in instanceconfig.xml:
a. Open instanceconfig.xml for editing at:
b. ORACLE_INSTANCE/config/OracleBIPresentationServicesComponent/
c. coreapplication_obipsn
d. Locate the Catalog element and update it as follows:
e. <Catalog>
f. <UpgradeAndExit>false</UpgradeAndExit>
g. <UpdateAccountGUIDs>UpdateAndExit</UpdateAccountGUIDs>
h. </Catalog>
i. Save and close the file.
3. Restart the Oracle Business Intelligence system components using opmnctl:
4. cd ORACLE_HOME/admin/instancen/bin
5. ./opmnctl stopall
6. ./opmnctl startall
7. Set the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter in NQSConfig.INI back to NO.
Important: You must perform this step to ensure that your system is secure.
8. Update the Catalog element in instanceconfig.xml to remove the UpdateAccount GUIDs entry.
9. Restart the Oracle Business Intelligence system components again using opmnctl:
10. cd ORACLE_HOME/admin/instancen/bin
11. ./opmnctl stopall
12. ./opmnctl startall
BUT THE ERROR ALSO EXISTING!
So,waiting for the help,thanks!

Hi,
if your using oracle db please make sure your db settings and tnsnames.oRA settings
also try you please try below troubleshooting steps:
1) please check latest error message and find the root cause,
presentation catalog log path:
obiee installed Drive:\Oracle\Middleware\instances\instance1\diagnostics\logs\OracleBIPresentationServicesComponent\coreapplication_obips1\sawlog0.txt file
also check it nqserver.log file
oracle bi server log path ref:
obiee installed Drive:\Oracle\Middleware\instances\instance1\diagnostics\logs\OracleBIServerComponent\coreapplication_obis1\nqserver.log
2)can you try to login RPD,EM and console by using your weblogic a/c then try to login with some other user.
if its not working then try to delete that users from catlog and check it Check OPMN services are running state.
e.x:
C:\Oracle\Middleware\instances\instance1\bin>opmnctl startall
opmnctl startall: starting opmn and all managed processes...
C:\Oracle\Middleware\instances\instance1\bin>opmnctl status
Processes in Instance: instance1
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
coreapplication_obiccs1 | OracleBIClusterCo~ | 4992 | Alive
coreapplication_obisch1 | OracleBIScheduler~ | 2420 | Alive
coreapplication_obijh1 | OracleBIJavaHostC~ | 1856 | Alive
coreapplication_obips1 | OracleBIPresentat~ | 5684 | Alive
coreapplication_obis1 | OracleBIServerCom~ | 5232 | Alive
3) Refresh GUIDs and Restart WebLogic and OPMN Services then try it again...still if your getting same issues then try to
check DB(try to login and confirm) and check it RPD --> physical layer connection pool setting and try to
view physical data.
also paste it your latest error log message (nqserver.log and sawlog01.log message) here
THanks
Deva

Issues after upgrading the Obiee from 10g to 11g

Hi all,
We have recently upgraded our rpd from 10g to 11g. And a part of Webcatlog is being upgraded. We observe issues with the upgraded reports.
As the for the report prompts the script was taking lot of time. And the browser pop's a message either to 'stop' or 'continue'.
The report is taking lot of time to run than the usual 10g environment. And the path BP1 is also applied for the 11g environment.
Please suggest a troubleshoot method to overcome the issues with the upgraded reports.
Thank you,
Chris.

Check this pdf file
http://www.rittmanmead.com/files/biforum2012/ranka_performance.pdf
If helps pls mark

After Migrating from 10g to 11g Geeting problems with Guided navigations.

After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
do we need to recreate those reports in actions and condition or is there any work around avoid reworking.

Hi Both,
Thanks for the reply ...
For Guided navigation we are getting like below error:
Odbc driver returned an error (SQLExecDirectW).
For Conditional dashboard section we are getting like below error:
"saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;"

Expdp impdp fails from 10g to 11g db version

Similar Messages

Maybe you are looking for