Expected Battery Duration using Photoshop?

I've just got my new macbook pro 13" and i'm worried the battery is not performing as should be expected.
How long are you guys getting out of your macbook pro 13" using photoshop, i think i must only be getting about 2 hours?
Thanks

What version of Photoshop are you using?
Photoshop CS3 and below would not run nativity on Intel computers and would run in Rosetta which is an emulator. (the emulator would require more power)
Photoshop CS4 finally switched native to Intel, and does not require Rosetta and would be more power efficient.
With any version though, you will not get 7 hours of photshop use as photoshop is very intensive. I've got about 3hrs on my 13" MBP running CS4.

Similar Messages

  • Expecting not to use MacBook for a month -- disconnect battery (or not)?

    I recall seeing some guidelines for when to remove a MacBook battery if you are expecting not to use your MacBook for a while.
    Is non-use for *a month* long enough to recommend removing a battery, or is that only necessary for longer periods (two months or longer?
    I assume there's no reason to leave the charger connected (?)
    Thanks. Replies appreciated.

    neuroanatomist wrote:
    "Long term" non-use would be more than 4 months. For one month, it's fine to leave the battery in. No reason to leave the AC connected, just shut down the MB.
    Hope this helps...
    Thanks.

  • Has anyone experienced there computer freezing up when useing Photoshop CS4 or SC5

    My two computers both freeze up when I am useing Photoshop (working with a large file 82-120 megs with  multiple layers, channels and paths) it only ocurred when useing Photoshop. Otherwise the computrs works fine for every day tasks for buseniss and personal use, admittedly, I do not have any other resource intnsive applications other then QuickBooks or maybe a large Excel spreadsheet but I have no problem with these large files. I am not a gamer or I could try a game I hear that they can be resorce intensive.
    My first computer is used for personal and business. this computer has a number of programs on it, including Kaspersky internet security but it is not lacking in resorces, It is a Intel based computer, sporting Intel quad core 2.5 GHz CPU. running on a  32 bit Windows 7 operating system, its list of components are 4 gig ram, Nvidia Geforce 9600 GT graphics card (on the Adobe approval list sporting open GL) 4 sata hard drives, 750 watt power supply, Asus P5N-D SLI motherboard, the tower case has 7 fans and the CPU is water cooled.
    I run Photoshop CS4 on this unit.
    after I experienced this loss of critical files I call the tech support line to see if they could help with recovery of the file and to ask if they had a way to prevent this from occuring again.
    They said that I could wave bye bye to the file and the work, additionaly they said if I was working with large files like that, I should be runing a 64 bit system that could utilize additional memory.
    I really like working with the large files so I bit the bullet and spent the money for the 2nd computer that I would use as a dedicated Photoshop workstation.
    the second system has many of the same components because they have worked admirably. the key difference is as followes. 8gig ram, 64 bit Windows 7 operating system, Photoshop CS5 and the only other software is the drivers for the wacom intos4 tablet. I desided not to install any type of antivirus program because I will not be useing it on the internet except when it needs to connect to Adobe for whatever. my decision not to install antivirus can be reversed but I did not want any questions about it slowing up the computer.
    This system with Photoshop CS5, freezes up faster then the CS4 system.
    When I say Freezes up what I am referring to is the mouse and keyboard will not respond. Control/alt/delete will not bring up the task manager. Eventually I give up and have to force a shut down by pushing and holding the case start button for about 5 to 8 seconds.
    when I restart the system I check the file that I have been working and several times the file that I was working on is corrupted beyond Photoshops ability to open.
    I have used the windows 7, on board, memory diagnostics and it claims that all of the memory is fine I have reviewed the event logs and the only critacal errors are about the system being improperly shuting down. I even went to the trouble to click on the link for each error that will take you to Microsofts website and will serch for anything they have about that event and they had no help on the event.
    People with mac computers have had a similar problem that had to do with there fonts and plugins, but I do not have a mac and I have not installed any plugins. The CS5 is as it came from the factory and the Mac people kicked me out telling me to get over on my side of the street where the rest of the windows outcast are but that was only after they thought they had there problen solved. Its so funny, but losing these files is not, Please Help

    Thanks everyone for jumping in with both feet.
    Let me review what I have already done.
    (1). I have already witnessed how the wround driver for the tablet will wrack havoc. when I first started the 64 bit version of CS5 it would not recognize any PSD files at all and if you went to the file and right clicked looking for the (open with) dialog box forget-about-it the option for Photoshop was not an option.
    I called Adobe tech support and they told me that I was not going to be able to use the Wacom tablet with the 64 bit versionof Photoshop. I found that a little suspicious seeing how Wacom tablets  are the most preferred pen tablets for professional illustrators.
    I contacted Wacom and they explained that I needed to uninstall the Wacom tablet, reboot the computer, go to the website, download the new 64 bit drivers and then reinstall the tablet. after I did that. Photoshop found all of my files and opened just fine.It was only then that I found out about the freezing proplem with the 64 Bit version.
    A number of the helpful people here have tried to advise this to me but I have already be down tha road.
    (2). I have the latest drivers for the BFG Nvidia Geforce 9600 Gt, released in April of this year and I had already new that the were necessary for the open GL so this is one of the first things that I tried.
    Some one from our cousin Mac's side of the famaly and (Noel just suggested) that I try turning off the open GL. As soon as cousin Mac asked us to try this I did it (Them being famaly and all).
    I was able to give it a try on the 32 bit system on Thursday 7/8/2010.
    I was able to work on a very large file with a multitude of layers, channels and paths for about 5 hours before if froze. after the reboot I found that the file was fine and retained everything up to my last save.
    But this test is only good as circumstantial evidence because the freezes are somwhat random. They mosly happen after I have been working with a large file for quite some time but some times it can happen very quickly, maybe 25 or 30 minutes.
    Bye the way I really enjoy the humor, the Mac people are very serious people.
    the Mac users are just grouchy because they expect their computers to "just work", and of course they don't.
    We PC users have been given no such expecatations. THANKS NOEL
    Oh, don't worry about them mean old grumpy PC wanna be Mac peoples. Gota luv it THANKS dec9
    and Eight thousand dollar papper weight says it all. THANKS $8000paperweight.
    (3) the memory, CPU and mother board can not be ruled out  completly, just yet
    As for the memory I have used the on board windows 7 diagnostics and it passed. but this is a unreliable test for hevy-resource dependent applications and a load or stress test would need to be done to be confidend.
    I have a number of computers with the same kind of ram but after swaping them around I can not say that I have had any lasting results and it is compecated by experiences like what happened to me after turning off the open GL. What if I had of only worked for 4 hours? I would of thought that the problem was solved thats what would of happened
    Do any of you work with files like I have been talking about? and if so do you experience any problems?
    The motherboard can not be rulled out by any tests that I know of other then process of elimination which is at the heart of all sound diagnostics.
    I downloaded a utility that is helpful called (Cupid Z) that gives real time monitoring and idenification of components.All the voltages seem fine.A.
    I hope I will be able to up load the screen shots so you all can have a look see.
    The CPH is more than likely not the problem.
    I do have the option to install Photoshop on a third computer that has most of the same components but has a different Intel CPU. this would rull out any compatability issues (CPU with the Board) but if that were the case I dought that every other progrem under the sun works fine except Photoshop.
    dec9, I did delete the prefs on the 32bit system but I have not had time to test the operation of Photoshop as of yet.
    Lastly I will try to upload the screen shots of (Cupid Z) you will see that the latencys and the frequency are correct. Under the SPDscreen the plausible timinigs for verious common frequencies are given,, all seem to be with in range. The lantency are inside the spec.given by Corsair;s website
    Asus provides a utility that allows you to monitor Temptures and voltages and I hope to send you a screen shot of this and you can see that they all are correct.
    I would like to send the event log but I am not sure how to do that if someone could give me the 411 on how to do this I will send them to you I have saved the errors in several file formats but I cant see how you cold read them on this little page Thanks again POBOX119 signing off

  • I am trying to Re-install CS5 and when going to use Photoshop, I have my original Serial Number and it will not let me activate the Software on a new hard drive.

    Why is Adobe making us jump so many hoops just to re-install software?
    I had a hardware crash and had to re-install all my programs.   We can not activate Photoshop CS online or by phone!  What gives?
    I am in the middle of a project and I can not use Photoshop CS
    Please advise.

    So let me get this right..... I Pay for Creative Suite 5.   I have my original discs and serial number.  I still have the entire box it came in.   I simply need to re-install the product.   I can not use Photoshop because it can not be activated via phone or online.  I am supposed to just in a chat page and you are put in a cue with "We are still assisting other customers, thank you for your patience. You can also try ourcommunity forums, where experts are online 24/7." 
    IS ADOBE FOR REAL???   THEY EXPECT YOU TO SIT IN A CUE ON HOLD WITHOUT AN INDICATION HOW LONG YOU WILL BE IN CUE IN THE MIDDLE OF THE WORK DAY.
    NOW YOU KNOW WHY PEOPLE HACK THEIR SOFTWARE!   
    I HAVE A JOB TO DO AND CAN NOT TELL A CLIENT, MY PHOTOSHOP DOES NOT WORK, I AM WAITING IN ADOBE'S HELP CUE!

  • I can no longer use Photoshop for UI Design (PS CC + Retina display)

    Since I bought the new MacBook Pro with retina display, Photoshop can no longer be an option for user interface design.
    I'm runningn the last Photoshop CC update, and each file opens at 50% size compared to other standard displays, which makes working with old files frustrating. Besides, creating a new 1200 wide document to start a web design makes no sense (too small).
    - View > 200% isn't a solution, things look pixelated.
    - To increase the resolution from 72ppi to 220 (retina display) isn't a solution, it doesn't affect the document size
    - Working with a document with 2x size can't be a solution: I should create everything with a 2x size (stroke, shadows, even rounded corners), which would push PS even more far away from being a tool that can be used for UI design.
    Should we just expect that PS on a high-res display behave like that? I don't think so. Besides, the guys of Sketch App (a tool for UI design, that I'm currently working with) found a solution - the retina canvas option:
    You can choose to see bitmap images pixelated, but still the vectors will look exactly like on the browser. By choosing to see the document at the same size but with more details, retina users can enjoy the power of the new MacBook while working on UI design.
    Am I missing something? Should we expect this option in Photoshop too?

    It upsets me to see that this was initially posted almost a year ago and there was no answer. There also seems to be no answer to various other questions about the same issue. Adobe do you care? I am already guessing that Apple doesn't. I know that Adobe has been at the top of this industry. Time for someone else to compete? This is a highly frustrating issue for UI and web designers.

  • How do you change the timeline duration in Photoshop CC?

    There seems to be 5 second limit on the duration of the timeline in Photoshop version 2014.
    How can you extend the duration of the animation? There's a timeline window, but no "animation" window as mentioned in many of the help files.
    How do you change the duration in Photoshop  2014?
    I'm using Windows 8.1 as my OS.
    Thanks.

    Thanks for the reply, but my point was not about the lack of creating animations.
    It seems that in Photoshop CC, you cannot change the duration of the timeline unless you click on the end of a clip and drag it out which will then give you more time.  As the original post mentioned, you automatically get a 5 second duration unless you have a video clip that is of longer time.  This all makes sense for videos, I understand that nobody (usually) wants to stretch video.  Video by nature will extend the timeline based on how much footage is present.
    Now take an animation scenario where you want to create something from scratch that spans longer than the default 5 seconds.  There is no option!!! No document settings, nothing that will allow you to extend the timeline.  I now have to click and drag each layer clip on the timeline to give it more time for the animation, one by one might I add (you can't even highlight multiple clips and extend them all at once, which is crazy).
    So what does this mean?  Well if you create a mockup of something with all of these intricate layers including backgrounds, copy etc. and you only intended to animate a certain piece for say 8 seconds, you'll have to extend each and every single layer clip in the timeline otherwise they will magically disappear and the only thing displaying is that which you have extended manually.
    The reason why you need a document settings in the timeline is to prevent content from disappearing if something extends for a certain amount of time.
    Frame by frame animations only allow for so much functionality, try to animate multiple objects at once with frames and go back and make a change to one part...
    CS5 would simply show everything regardless if they did nothing on the timeline, it allowed you to see all of your elements present.
    Again, I stand by my statement saying that the new timeline is flawed.

  • How can I resize an image without losing resolution or using the crop tool? I am using Photoshop Elements 13 on a PC.

    How can I resize an image without losing resolution or using the crop tool? I am using Photoshop Elements 13 on a PC.

    Hi Peru Bob,
    I've tried two images, the results were:
    Image 1
    Jpg, original file size 923KB, dimensions 848px x 279px.
    After resizing to 848px x 180px with 72dpi, the file size decreased to 164KB.
    Image 2
    Jpg, original file size 809KB, dimensions 1200px x 1800px.
    After resizing to 668px x 722px with 72dpi, the file size decreased to 307KB.
    So, there seems to be a fair file size loss - is this to be expected?

  • Anyone using Photoshop Elements for Fashion Design

    Hi,
    I'm looking for software to help me in the Fashion Design Industry. I want to use it for my sketches.   I am a beginner when it comes to Fashion Design and have no experience using Photoshop software.  I had read somewhere that Photoshop Elements is a less expensive version of Photoshop.  I read that it does 90% of what Photoshop does without the higher end pre -press printing capabilities.  I also read that there is a book that will help you with the other 10% to achieve the full Photoshop capabilities.
    1a.  I would like to know is anyone using Photoshop Elements for Fashion Design?
    1b.  If yes, please explain in details what exactly are you using it for?
    2a.  Is there more than one version of Photoshop Elements?
    2b.  If so, what version do you recommend?
    3.   How easy is it to use?
    4.  Do you know of any books you can recommend that will help me with using the software for fashion design?
    5.  If you don't feel Photoshop Elements is the best choice, then what other software would you recommend?
    Thanks

    I've never used PSE for fashion design, but there is only one flavor of elements, not a variety of different versions. I would wonder about using it for this because it could make a lot of difference if you need to create output in CMYK form (for print) or to softproof (neither of which is available in PSE). You also can't create composite layers in Elements.
    I like Elements a lot, but I would not say it's 90% of Photoshop, more like 70% and I would expect that people would use Illustrator rather than PS for most things to do with creating illustrations. Also, there is no book that can make PSE into PS, although you can extend what it can do, but Adobe has deliberately crippled certain features in PSE.
    I would say we need to know what you need a program to do to be able to give you any useful kind of advice. If you need to be able to draw vectors and paths, PSE is not a good choice. If you just need to sketch, it's fine.

  • Is there a plug in yet to use photoshop elements 12 with nikon d750

    I want to use Photoshop Elements 12 with my Nikon D750. Is there a raw plug in yet ?

    No, and it is expected that PSE 12 will not get any further updates.
    If you don't want to upgrade to PSE 13, you can download the free Adobe DNG converter. Use that to convert your NEF files to DNG files which can then be used by PSE 12.
    Windows: Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7
    MAC: Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7
    Brian

  • Slow Using Photoshop and InDesign

    We have several 2GHz C2D Mac minis with 2GB RAM running Leopard. The users are complaining that using Photoshop CS4 and InDesign CS2 is slow. Is this to be expected? Would it be better to upgrade the PowerMac G5's we also have to Leopard, and use the software on that instead? Thanks.

    Photoshop and InDesign both need a lot of room in RAM to run at a decent speed. Between just what the OS and Photoshop need, 2 GB of RAM isn't enough. You're getting a lot of page outs to disk in order to run these apps. Even worse if you have both PS and InDesign running at the same time. You really need at least 4 GB of RAM to see good performance.
    So yes, since the Mac Minis can't have more than 3 GB of RAM installed, you'd be much happier with the performance of these apps on the G5s. But you'll still have to have more than 2 GB of RAM installed, or you essentially won't see any difference. You would want to have at least 4 GB of RAM installed on the G5s.

  • What battery to use in an Apple Wireless Keyboard

    Hello. I bought a used Apple Wireless Keyboard (short, two batteries to be inserted), but can't find any information on what type of battery to use (rechargeable or no) other than the very vague information "AA". Batteries seem to have two main values, the mAh (as far as I understand, that stands for duration only—but don't we need an Ampere value, too?) and voltage. At least a voltage information would be helpful. 1.2V, as I read, will be considered by the mac as "low on battery", but I'm sure there is an upper limit, too, isn't there?
    I'm not asking for an introduction to electryphysics here, although it may sound that way. Really all I want to know is: What pair of rechargeable batteries to buy.

    Hello:
    Adding to "X4's" good feedback....
    . At least a voltage information would be helpful. 1.2V, as I read, will be considered by the mac as "low on battery",
    Nope.  Rechargeables are all 1.2v.  They do not last as long as rechargeables, but that makes no difference to me.  I use 2450 mAh Energizers and a 15 minute  Energizer charger (all obtained on eBay - new - at a very reasonable cost).
    IMHO, rechargeables are better (long term) and are also environmentally friendly.
    Barry

  • When I use Photoshop CS 6 to edit video, I don't know how to change video speed after I converted the clip to smart object?

    When I use Photoshop CS 6 to edit video, I don't know how to change video speed after I converted the clip to smart object? The clip color turns purple and it only allows me to add motion but not change the clip duration and speed anymore.

    Thanks for the reply and as a work around method I used the Photoshop to do all the adjustments then export the video to iMovie to finish the final cut. I also have a problem to paint or clone on a blank video layer created in Photoshop. It tells me the time is beyond the target frame time, I don't understand the message. Can you explain to me what did I do wrong? Thanks a lot!
    John Wang
    801-3618742
    [email protected] 
    http://johnwanggallery.shutterfly.com  

  • Adobe cs6: extracting files, installer detects issues. Using Photoshop, the program crashes quickly.

    I'm in the process of downloading Adobe cs6, and when I extract the downloaded files, installer detects a machine restart is pending, but even after restarting the computer, and retrying to extract the files the issue persists. So I tried ignoring the problem, (as that is one of the options) and completing the download, but then when I go ahead and use Photoshop, I only get to use it for less than 20 seconds and the program completely shuts down. I have no clue how to fix this problem.
    I've tried unistalling Adobe cs6 and reistalling it multiple times, but no luck.
    I've also downloaded the update published by adobe today (11/26/2012) but i still have this problem.
    I don't know how to solve this issue, doesn anyone have any suggestions as how to fix it?
    i'm using windows 7, and AMD Professional firepro graphics card
    Thanks Stef

    Hi Stef. You’ve posted your question in a forum that is for beginners trying to learn the basics of Photoshop.  I'm moving your question to the Downloading, Installing, Setting Up forum for specialized attention to your situation.

  • Using Photoshop CC 2014 on a Windows Tablet without a keyboard and mouse

    Using Photoshop CC 2014 on a Windows Tablet without a keyboard and mouse can be quite a challenge. Even if you use the experimental 2x UI. You can not use your fingers or to quickly change tools and change settings. You have no shortcut without popping up Windows touch keyboard or leave it up taking a great deal of screen space.  If you're using the 2x UI Photoshop uses the screen at half resolution so it displays 1/4 the amount of pixels it could.
    Fortunately I found a little touchkey utility on the web the lets you design your own touch keyboards. The can be transparent and you can even paint under them as long as you start the stroke  outside the keyboard area. The keyboards can be toggles on and off so you can actually use Photoshop.  The utility is small and requires not installation can be run form anywhere.  I purchased a Surface Pro 3 a week ago.  Its a full fledge PC.  Through the home group I can access all machines in my house and using network shares I can access all files on my machines and the network drive on my router,  I can print on my Epson 4800 printer. I can show slideshow on my HDTV via   Bluetooth using a Microsoft wireless display adapter.   I can plug in my Wacom Intuos Pro wireless receiver into the USB  3 port and use my Wacom tablet.  Have a very touchy machine.  Touch on the keyboard touch pad touch on the Display display and on the Wacom tablet.  Could have touch on a mouse but I prefer the Microsoft comfort bluetooth mouse that has six buttons and a four way wheel.
    As a tablet its under two pounds.  Its quite impressive cost why mor the an iPad but worth the cost to me for with windows I can get at the file system.   If you have a Surface Pro 3 you should check out  "Touchkey" its handy.

    Do a screen screen capture and post it here so we can see what you stating about a white layout...

  • Cannot use photoshop or any other program even though i am up to date with payments and nothing appears to be wrong? Help

    I have been trying to use Photoshop, as it was working fine about an hour ago, and now it will not open files and says my subscription has ended even though i have a subscription up until November of next year. Can anyone help? Or have had the same thing happen and have some advice?

    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

Maybe you are looking for

  • How do you hook up apple TV when existing TV has one HDMI already in use for satellite

    My TV has one HDMI outlet.  Its being used to hook up to my satellite box.  When I unplug, I lose picture.  I thought I could may be hook Apple TV into satellite box, but that also only has one HDMI outlet.  Does anyone know how to hook up Apple TV w

  • How can I delete multiple contacts at a time.

    I need to clean up my contacts, I was wondering how to do multiple contacts instead of one by one. 

  • Could not locate new host added from Solaris 10 Sparc servers

    Hi All, I am having difficulty finding a new host (Stallion terminal server. e.g. jodie - 10.56.4.7) using ping on our Sun Fire T5220 Solaris 10 on our network, even though jodie has been updated to the DHCP (10.56.19.157) server and can be located f

  • Goods mOvement in consignment Fill-Up

    Dear friends, I have a business requirement like this...When I complete PGI in Consinment fillup the goods automatically flows to unrestricted site of customers place....with the Mov type 631...I want these goods to go to Quality Inspection site auto

  • After Effects US Shortcuts on italian keyboard

    Hello to evryone! I'm here with a question about keyboards shortcuts. As the main title, i'm running AE in english on an italian keyboard. I've tried everything, changing the shortcut file in Roaming folder and i've used KeyedUp script. Nothing seems