Expected Price ED1 EDI2 Sales Order & Incompletion issues re: Delivery/Bill

Hi,
We are using ED1 and EDI2 conditions for expected price on the sales order to trigger incompletion. This works fine, and it's possible to use V.25 to release or manually adjust the pricing conditions to match.
However we have problems in the way it is working re: Header/Item - if say we have two lines, line10 EDI1/2 prices are ok, complete; line 20 EDI1/2 conditions also added but incorrect and therefore incomplete.
Now when user trys to create a Delivery - they can create a delivery for line 10 but the line 20 errors because it is incomplete. This at line level would be ok, if we could subsequently Bill this line, but doing this through VF01 errors because of message 'VF055 (VF)055 Pricing error in document'
The only way to clear it is to clear line 10 on the sales order, say V.25 which then allows Line 10 to also be Delivered and Billed.
The above is with incompletion status group 06 which should prevent Delivery & Billing. Alternatively we could use Incompletion status 02, which blocks Delivery but allows Billing.
However this is inconsistant with the EDI1/2 conditions - Delivery seems to be blocked at the Item Level, but Billing at Header Level.
Is there a solution? Ideally we want the either:-
i) Delivery to prevented if any line is incomplete for EDI1/2, or
ii) Billing to be prevented only if the line Billed on the Delivery is incomplete on the Sales Order, not any line.
Any advice appreciated.

Hi,
I suggest you check copy control (delivery->billing) at item level in tr. VTFL.
Do you use standard routine in 'copying requirements' ? If needed you can also create custom routine that would not raise error for your scenario.
Regards,
Dominik Modrzejewski

Similar Messages

Price chnage at sales order level but not in billing

Hi
I want to maintain the price manually in sales order but donot want to allow user to change the price in billing. I understand it is controlled at condition type level but not at document level.
Need your advise as to how we an achieve it.
Regards,
Neeraj Srivastava

Hi Neeraj,
You can achieve this by following below setting:
Go to into the condition for which you want to maintain price manually.
put C in manual entry field.
Set check mark for Header cond., Item cond & Delete only. Remove check mark for Amount/percent & value. Save it.
Go to pricing procedure and mark this condition for manual entry and mandatory.
Only thing in this is you need to put this condition in sales order manually & maintain price for this condition before pressing "Enter". Once you press "Enter" it will go in gray mode.
Ramchandra

Price change in Sales Order not incorporated in Delivery

Hi All,
We are facing a problem, when creating Delivery against the Sales Order, changed Price in Sales Order is not being copied.Pricing is activated in Delivery.Condition record is maintained for Price.Condition type for Price is same in both Sales Order and Delivery.
In Delivey the system is picking the condition record Price and not the changed Sales order Price which we want along some other condition types.
kindly suggest some solution soon.
thanks and regards

Hi Adams
I suspect what is happening is that the pricing procedure is getting re-determined in the delivery document.
How many such condition types are there? If there are a few, then you can create new pricing condition types for the deliveries. Dont assign any access seq to them. Further, define a new Alt cal Type for these condition types to copy the value from the corresponding condition type in sales document.
e.g.
Reward points if thi helps you
Rgds

Create Sales order with reference to a Billing Document - Net price issue

Hi Everyone,
The Billing Document has one line item with Net value of 16,000. However, when I create the Sales Order with reference to the Billing Document, the net price shows 64,000. When I check the Document flow of the Billing Document, there were two Contracts on top of my Billing Document. One is a contract with the overall status of "Being Processed" and this is where I checked the net value is 64,000. The next contract invoice is already completed (net value is 16,000).
Has anyone encounter such case? How would I be able to create the sales order with reference to the Billing document and have the net value of what is in the Billing Document (16,000). Which part of the configuration is setting this up. Thanks!

Hi,
This is a very rare case, if you are sure of the scenario, would suggest you two alternatives:
1) whenever you go against the flow of SAP, you have customize it, so its better you discuss this matter with your ABAP person.
2) never tried it out but you can:
you cannot see that in Billing Document that which is the sales document assigned to it, but to estblish that relationship,
we do copy control setting from Billing Document to Sales Order type (T.Code:VTFA).
Menupath: SPRO >> IMG >> Sales & Distribution >. sales >> Billing Document >> Copy Control >> Copy Control from Billing Document to Sales Order Type.
Hope this will help you.
Regards,
Siddharth.

Bottom/base price check in Sales order processing

Hi
In my company we are using process Sales Order > DO > Billing. Same pricing procedure for sales document types and billing types. No pricing procedure for DO. Our management wants to implement bottom price check in sales order processing e.g there must be one sale price on which sale invoice will be booked and there must also be one static price maintained and system will check after all taxes and discounts calculation that net value should not be less then bottom price.
Currently we are using user exit in enhancement MV45AFZZ. Our ABAPER has written logic in this of following scenario. We have maintained commercial price in ZCOM condition type and bottom price in ZBAS condition type. Lets take and example
ZCOM = Sale price= 500
ZDIS = Discount = 100
Net value/Amount for credit check 500-100 = 400
ZBAS Bottom price = 450
In above scenario system should not allow to save sale order/billing document and give error "Sale price is below bottom price" Then user will change the discount from 100 to 50 and Net value will be then 450 and system will allow to save sale order/billing document.
I want to to do this in Pricing procedure pricing routines. Please tell me is it possible with calculation types? Im wondering if we can do this in enhancement then we must write the same logic in VOFM pricing routine and we can control this from there too. In our current ABAP check everything is working fine but I just want to minimize the use of ABAP checks and enhancements and control the things from functional side not from ABAP.
Please let me know if someone need more clarification or someone have any productive suggestions in this regard. If there is any other solution it will be highly appreciated.
Thanks in advance.

Similar functionality is already there, where if the net price of an item differs from "Customer expected price" (conditions EDI1/EDI2) then SAP automatically pushes the order into incompletion. You can ask the developer to see how EDI1 is used in the pricing logic.
However, the condition EDI1 is used to check if the item value is different to Customer expected price in case of EDI orders and is not standard for your requirement. But you get my drift, that you can have your own condition in the pricing procedure that will fetch the base price value and can be used in the logic to show an error message (to stop order processing) or push into incompletion log similar to condition EDI1

Cannot set item's price in new sales order using E-Commerce for ByDesign.

Hello,
I'm working on a program to create zero value sales orders in my companies SAP system to help track warranties. Every portion of this program is straight forward except for setting an item's list price to zero. I'm using C# .NET. Below is my code to create the SalesOrderMaintainRequestItem. Any advice would be greatly appreciated.
private SalesOrderMaintainRequestItem[] GetItems(Warranty warranty) // Custom Warranty Object
    int count = warranty.LineItems.Count; // Warranty object has an array of line items
    SalesOrderMaintainRequestItem[] item = new SalesOrderMaintainRequestItem[count];
    for (int i = 0; i < count; i++) // for each line item in the warranty object
        item[i] = new SalesOrderMaintainRequestItem();
        item[i].BuyerID = _ID;
        item[i].ItemProduct = new SalesOrderMaintainRequestItemProduct();
        item[i].ItemProduct.ProductID = new NOCONVERSION_ProductID();
        item[i].ItemProduct.ProductID.Value = warranty.LineItems[i].ReplaceWith;
        item[i].PriceAndTaxCalculationItem = new SalesOrderMaintainRequestPriceAndTaxCalculationItem();
        item[i].PriceAndTaxCalculationItem.ItemMainDiscount = new SalesOrderMaintainRequestPriceAndTaxCalculationItemItemMainDiscount();
        item[i].PriceAndTaxCalculationItem.ItemMainDiscount.Rate = new Rate();
        item[i].PriceAndTaxCalculationItem.ItemMainPrice = new SalesOrderMaintainRequestPriceAndTaxCalculationItemItemMainPrice();
        item[i].PriceAndTaxCalculationItem.ItemMainPrice.Rate = new Rate();
        item[i].PriceAndTaxCalculationItem.ItemMainPrice.actionCode = ActionCode.Item01; // tried all the options for this one
        item[i].PriceAndTaxCalculationItem.ItemMainPrice.Rate.DecimalValue = 1.0M; // trying to set it as $1 just for testing, will be 0 when live
           // past tests that didn't work
        //item[i].PriceAndTaxCalculationItem.ItemPriceComponent = new SalesOrderMaintainRequestPriceAndTaxCalculationItemItemPriceComponent[1];
        //item[i].PriceAndTaxCalculationItem.ItemPriceComponent[0] = new SalesOrderMaintainRequestPriceAndTaxCalculationItemItemPriceComponent();
        //item[i].PriceAndTaxCalculationItem.ItemPriceComponent[0].Rate = new Rate();
        //item[i].PriceAndTaxCalculationItem.ItemPriceComponent[0].Rate.BaseDecimalValue = 1.0M;
        //item[i].PriceAndTaxCalculationItem.ItemPriceComponent[0].Rate.DecimalValue = 1.0M;
        //item[i].PriceAndTaxCalculationItem.ItemPriceComponent[0].Rate.CurrencyCode = "USD";
        //item[i].PriceAndTaxCalculationItem.itemPriceComponentListCompleteTransmissionIndicator = true;
        item[i].ItemScheduleLine = new SalesOrderMaintainRequestItemScheduleLine[1];
        item[i].ItemScheduleLine[0] = new SalesOrderMaintainRequestItemScheduleLine();
        item[i].ItemScheduleLine[0].Quantity = new Quantity();
        item[i].ItemScheduleLine[0].Quantity.Value = warranty.LineItems[i].ReplaceQty;
    return item;

Hi Joshua,
it's a long time ago and I hope you were able to solve your issue. For others who want to change prices in sales orders the following might be helpful:
It is not possible to set the price of a sales order in the create webservice call. You need to create the sales order first and then call the webservice a second time with actionCode="02" (Update).
The following is an extract from the sales order webservice documentation:
Node – PriceAndTaxCalculation
A price and tax calculation is the summary of the determined price and tax components for a business case. A specification of the general procedure for price and tax determination and valuation using attributes those are characteristic or relevant for the whole object.
Note: PriceAndTaxCalculation cannot be created but can only be modified. So this means that if the customer wishes to change the Discount or Freight charge, then the customer has to create the order first and then make a second web-service request to the update this sales order with the pricing information that is to be changed.
For the update you only need to send the ID of the sales order, the IDs of the items and the PriceAndTaxCalculation node.
The following would be an easy XML example for the update call:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:glob="http://sap.com/xi/SAPGlobal20/Global">
   <soapenv:Header/>
   <soapenv:Body>
      <glob:SalesOrderBundleMaintainRequest_sync>
         <SalesOrder>
          <ID>1234</ID>
            <Item actionCode="02">
               <ID>10</ID>
               <PriceAndTaxCalculationItem actionCode="02">
                  <ItemMainPrice>
                     <Rate>
                        <DecimalValue>5.00</DecimalValue>
                        <CurrencyCode>USD</CurrencyCode>
                     </Rate>
                  </ItemMainPrice>
               </PriceAndTaxCalculationItem>
            </Item>
         </SalesOrder>
      </glob:SalesOrderBundleMaintainRequest_sync>
   </soapenv:Body>
</soapenv:Envelope>
If you need further help with webservices or C#, let me know.
Best regards,
Felix

How To Add a new column for ZPR0 price in open sales order report ??

HI,
my requirement is To Add a new column for ZPR0 price in open sales order report if the order/scheduling agreement is a cross-company code transaction l(company code of order/scheduling agreement <> company code of delivering plant), price = ZPR0 price as at estimated GI date

k

Final price of the Sales Order calculation on payment term

Hi,
Out Business requirement as follows.
1) one ZNAP pricing condition will be maintained by the monthly wise by business for pricing. this is a statistical condition only checking at sales order level only. this condition will check with Final price of the Sales order.
Now the requirement is
1) based on payment term of the Sales Order. plus if its a credit payment if the its CASH payment. these deduction should be added to ZNAP condition, and same will calculate with Final price, while creating Sales order.
For Example:
ZANP condition maintained 1000 USD.
while creating the SO:
If the payment term of the customer: PT30, ( it means payment with be in 30 days of the bill creation date)
system should do the below calculations
1) Scenario
Sales Order: Final price :                                       1500 USD( maintained by the Sales User while creating the SO)
ZNAP price                      :                                    1000 USD
according payment term 30 days                            20 USD ( as per table maintenance for calculation of the payment term.)
Calcuation:                                                          1000+20= 1020 (approximate need to add as interest rate)
Then final it should display final price 1500-1020= 480 USD.
2) Scenario:
If the payment term Cash:
ZNAP                                                            : 1000 - 20= 980 ( approximately and deduct, from the condition due to cash payment its like discount)
calucalte"                                                       1500-980= 520 difference
this purely internal pricing calculation with final price...
pl let me know how to get this in the pricing. and payment could be 30 days, 45 days 60 days etc.
Thanks.

Hi M Sham,
I believe your requirement can not be met with Standard pricing and you will have to create Routines for getting this result.
From scenario I believe you will be doing below points:
You should Create Z-Table with Payment Term and respective rates against those payment Term.
You should create a statistical condition type(Ex. ZNP1) and create Calculation Type routine with Logic to get KOMK-ZTERM field and derive value from Z-Table and update XKWERT field.
Calculate addition of ZNAP and ZNP1 (With +ve or -ve Signs)
And then again make deduction of derived value from Finale Value.
Do let me know if I have misunderstood your question.
Regards,
MJ.

Can we edit Gross Price field in Sales Order

Hi experts,
According Help document (help - under Sales A/R/Sales Order-Sales document content tab ) as follows, userwe should be able to edit gross price field in Sales order
Enter in this field the unit price including tax. SAP Business One calculates automatically the unit price before tax and the tax amount, based on the tax code in the row. After pressing the TAB key, the Unit Price field and the Tax/Unit field are updated accordingly.
The tax amount is calculated as follows:
*Gross Price / (1 + Tax %) * Tax % = Tax Amount*
But when I set up in form setting visible and active for Gross Price, though I AM NOT ABLE TO EDIT GROSS PRICE FIELD
Is it bug in SAP ? I
BR
Samir Gandhi

Hi Samir Gandhi,
You may check SAP Note Number: 1060666 to see if it applies to you.
Thanks,
Gordon

Price in the Sales Order

Dear SD,
Normallly we enterd the Price in the Sales Order for a Finished Goods. Is there any other way, that Sales Order Directly Picks the Cost from Pricing Procedure.
REgards

Hi,
I understood that you need the following clarifications.
1.     VPRS: This is cost price. For example, you are doing trading business and you buy an item for Rs. 125. This is cost price. This price is maintained in material master in Accounting view in the field Standard Price.
2.     PR00: This is selling price. This includes the profit. In this example, say it is 200. This is maintained in Condition records. The transaction code is VK11.
3.     Pricing Procedure: Both of the condition types (VPRS, PR00) are maintained in the pricing procedure. Please check the standard pricing procedure RVAA01.
If the condition type is not maintained in your pricing procedure, you can add the condition type VPRS in your pricing procedure and assign the requirement as 4 (Cost). Enter tick mark in u2018Statisticsu2019.
If you create a sales order, you will get the value of PR00 (selling price) and the Cost price (VPRS) in the sales order. Sales order is a document that can be sent to the customer to confirm the sales. So, here you do not want to show the cost price of the item. That is why the condition is not selected for print. If you are dealing with your associate companies and you want to print the cost price in the sales order, you can print the cost price VPRS in the sales order. To do this, select u2018Xu2019 in print column of the pricing procedure for Condition type VPRS. Hereafter you can print the cost price of the item in the sales order. But it should be printed appropriately with the help of an ABAPer.
4.     VPRS u2013 Statistical: VPRS is always maintained as statistical. This is not used for updating financial entries while creating billing; but it is used to find the profit margin. Whenever the cost price of the material changes, we have to update the cost price (VPRS) by transaction code MR21.
5.     Stock value: While calculating warehouse stock by transaction code MB52, the system takes the value given in the material master in accounting view. The value shown in VPRS and Value taken for stock valuation are one and same. Stocks are evaluated on cost price; not on selling price.
Hope this information will be useful to you.
Regards,
K Bharathi

Disable / Deactivate Update Price button in Sales order creation

Hi Gurus,
My requirement is to disable the 'Price Update' button in the item --> conditions screen while creating or changing the sale sorder. A set of users should not be able to update the prices using 'Update Pricing' button. Is there any way to disable/deactivate this button in VA01 / VA02?
Regards,
Sam

Hi Sam,
I think you can control through Authorization for the set of users to update the price in the sales Order. I think it will solve your requirement.
Regards,
SK

Base price calculation in sales order using Routines.

Dear all,
I have a requirement related to usage of routine in pricing procedure. The requirement is as given below.
A base price for a material is entered in the contract manually using a customized condition record.Later a sales order will be raised with reference to contract. now we need to bring the price entered in the contract to sales order after some calculations done using a customized "Z TABLE"
We are trying to use routines to trigger to calculate the base price in the sales order.
Please suggest what type of routine to be used in such cases(ex formula,pricing etc)
Also please go through the below mentioned example for better understanding.
Contract price : Quantity 3: base price 10,000 per day Total : 30,000 perday
ZTABLE : number of days per month will be maintained in the table based on the working days.
Sale Order : Quantity 1 : Month working days 23 total 2,30,000 (We need to calculate this total and display as base price in sales order)
Please suggest how to address this using routines.

Dear Mudigonda,
As per your scenario you are creating sales order with reference to the contract and here in contract you are maintaining the manual price . that means the same manual price has to copy to sales order level then as per the calculation rule it will multiply with your Z table value .
For this requirement you can make some changes in copy control from contract to sales order, here at item category level you have to change pricing type to 'B' so that what ever your manual price value will populate to sales order level after that due to calculation rule value will change .
Regards,,
C.B Reddy.

Manual price change on Sales Order line

Hi everyone,
Say I have a product A and have entered this in the price list Product A = USD 100 per unit.
I create the order and process the order, do ship confirm, but at the time of creating the invoice, I want to change the price to 97. or 95 or whatever. This is not fixed and depends probably on various business factors not in anyone's control.
I tried to manually change the price on the sales order line, but it is not allowing me to change, saying 'no manual discounts available'. My questions are :
1. How can I manually change the price of a product at the time of invoicing?
2. I have not defined any modifiers or qualifiers. Is this required, and if yes, what type and how to do it.
3. At what level can the price be changed? at order booking or even after ship confirm?
4. If I change the price today, this price change will be applicable to what orders? All orders with booked statuses, or all orders which are not yet ship confirmed, or all orders not interfaced or all future orders entered after this price change is saved?
5. Do I need to make this price change in the price list also?
Pls reply asap.
Thanks a lot in advance.
Sudhindra Desai

Hi Sudhindra,
Check out if this helps:
1. How can I manually change the price of a product at the time of invoicing?
You cannot change the price once invoicing is done or when the Order Line Status becomes 'Closed' . Any change at the order entry level can only be effected till the Order Line Status is in 'Entered' Stage.
2. I have not defined any modifiers or qualifiers. Is this required, and if yes, what type and how to do it.
We have defined a modifier for our business purpose where by we can manually change the Price at the order entry level. If you require I can send you the screen shots of the setups we have done. I would need your e-mail id for that.
3. At what level can the price be changed? at order booking or even after ship confirm?
Price can be changed till the order is in 'Entered Stage'. It cannot be changed once it is 'Booked'
4. If I change the price today, this price change will be applicable to what orders? All orders with booked statuses, or all orders which are not yet ship confirmed, or all orders not interfaced or all future orders entered after this price change is saved?
I did'nt understand this question actually. I think the price change is done on an order to order basis, if it is done for a particular order I don't think so it would affect further orders. If i'm changing the price in my price list then surely it would affect future orders.
5. Do I need to make this price change in the price list also?
This depends on ur business situation. If the price change is permanent u can make the changes in the price list also. Our business situation demands a base price to be defined in the price list even though the price we enter at the order entry level is always different from what comes from the attached price list.
Hope this helps you.
Regards,
Anil Wadhwa

I need to add push button to last extended price unit in sale order item B

i need to add push button to field last extended price unit in sale order item additional data B

i need to add push button to field last extended price unit in sale order item additional data B

CO: put a standard price check on sales order (URGENT PLEASE)

Daer Gurus,
I want to put a standard price check on sales order.
Will you please help me?
Thanks in advance,
Best Regards.
Juan
Edited by: juan on Mar 7, 2008 1:01 PM

Hi,
1. I don't think it is possible to change system design. Better remove this function to avoid waiting time, if not necessary.
2. Not sure about second question.
Thanks & Regards,
Nagarajan

Expected Price ED1 EDI2 Sales Order & Incompletion issues re: Delivery/Bill

Similar Messages

Maybe you are looking for