Expense Report is not starting with TRIPSCHEMA

Hello there,
i passed SAP_FITE_TRIPSCHEMA=01 as Applicationparameter. But it isnt starting with this schema, just select it in the dropdownbox.
But my intention is to start directly with schema 01.
What can I do?
Best Regards
Julian Kallidat

Firstly Is this for an expense report from an approved travel request and if so do you have one trip schema which allows overlapping? This is neccessary if starting the expense report from approved travel request
For default trip schema the best solution for this is to maintain an URL parameter for the
resource you defined for the service (EMPLOYEE_TRAVEL_EXPENSES_SRV).
Please go to IMG
Define Resources > add entries
and maintain the following URL parameter:
sap.xss.tra.TripSchema=01 (or whatever number your schema has!)
if there is already another URL parameter connect them with &, for
example:
refreshmenue=true&sap.xss.tra.TripSchema=01

Similar Messages

Web Analysis report is not coming with the border/logo/heading while print

Hi All,
I am using 9.3.1 version of hyperion planning were Web Analysis report is not coming with the border/logo/heading while printing with the option "print all object", Only the data grid is coming in the print. If I use "print screen" it is coming with border/logo/heading but it gives a screenshot of the report, that won't cater out need.
So please suggest us with a resolution to have border, logo and heading, while using Print all object.
Thanks with regards....
Rao

Hi Sagar,
In scripts when you will see print preview the logo will be not shown up with clarity.Take the print out of the document and check whether logo is printing up with clarity.
Thanks
Phani

Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.

Hi,
I have a MBP 13' Late 2011 and Yosemite 10.10.2 (14C1514).
Until yesterday, I was using Garmin ConnectIQ SDK and all was working fine.
Yesterday, I've updated my system with latest security updates and Xcode updates too (Version 6.2 (6C131e)).
Since, I can't launch the ConnectIQ simulator app, I have this message in console :
8/04/2015 15:19:04,103 mds[38]: There was an error parsing the Info.plist for the bundle at URL Info.plist -- file:///Volumes/Leto/connectiq-sdk-mac-1.1.0_2/ios/ConnectIQ.bundle/
The data couldn’t be read because it isn’t in the correct format.
<CFBasicHash 0x7fa64f44e9a0 [0x7fff7dfc7cf0]>{type = immutable dict, count = 2,
entries =>
0 : <CFString 0x7fff7df92580 [0x7fff7dfc7cf0]>{contents = "NSDebugDescription"} = <CFString 0x7fa64f44f0a0 [0x7fff7dfc7cf0]>{contents = "Unexpected character b at line 1"}
1 : <CFString 0x7fff7df9f5e0 [0x7fff7dfc7cf0]>{contents = "kCFPropertyListOldStyleParsingError"} = Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Conversion of string failed.) UserInfo=0x7fa64f44eda0 {NSDebugDescription=Conversion of string failed.}
I have looked at this file and it looks like a binary plist
bplist00ß^P^V^A^B^C^D^E^F^G^H
^K^L^M^N^O^P^Q^R^S^T^U^V^W^X^Y^Z^[^\^]^^^_ !"$%&'()'+,^[\CFBundleNameWDTXcodeYDTSDKName_^P^XNSHumanReadableCopyrightZDTSDKBuild_^P^YCFBundleDevelopmentRegion_^P^OCFBundleVersi on_^P^SBuildMachineOSBuild^DTPlatformName_^P^SCFBundlePackageType_^P^ZCFBundleShortVersionString_^P^ZCFBundleSupportedPlatforms_^P^]CFBundleInfoDictionaryVersion_^P^RCFBundleE xecutableZDTCompiler_^P^PMinimumOSVersion_^P^RCFBundleIdentifier^UIDeviceFamily_^P^QDTPlatformVersion\DTXcodeBuild_^P^QCFBundleSignature_^P^ODTPlatformBuildYConnectIQT0611[iph oneos8.1o^P-^@C^@o^@p^@y^@r^@i^@g^@h^@t^@ ^@©^@ ^@2^@0^@1^@5^@ ^@G^@a^@r^@m^@i^@n^@.^@ ^@A^@l^@l^@ ^@r^@i^@g^@h^@t^@s^@ ^@r^@e^@s^@e^@r^@v^@e^@d^@.V12B411RenQ1V14C109Xiphoneos TBNDLS1.0¡#XiPhoneOSS6.0YConnectIQ_^P"com.apple.compilers.llvm.clang.1_0S8.1_^P^Tcom.garmin.ConnectIQ¡*^P^AW6A2008aT????^@^H^@7^@D^@L^@V^@q^@|^@<98>^@ª^@À^@Ï^@å^A^B^A^_^A?^AT^ A_^Ar^A<87>^A<96>^Aª^A·^AË^AÝ^Aç^Aì^Aø^BU^B\^B_^Ba^Bh^Bq^Bv^Bz^B|^B<85>^B<89>^B<93>^B¸^B¼^BÓ^BÕ^B×^Bß^@^@^@^@^@^@^B^A^@^@^@^@^@^@^@-^@^@^@^@^@^@^@^@^@^@^@^@^@^@^Bä
I guess it is a normal format but my system seems to be unable to read binary plist ?
I tried some stuff with plutil
plutil -lint Info.plist
Info.plist: Unexpected character b at line 1
Same for convert
plutil -convert xml1 Info.plist
Info.plist: Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.
I also try to download a fresh version of the connectIQ SDK and no changes.
Any idea ?
Thanks

Step by step, how did you arrive at seeing this agreement?

The creditors report is not matching with the G/L account

Hi Gurus,
The creditors report is not matching with the G/L account ,where i can go and find out the differences ?
Please give me advice,
I will assign points
Thanks&Regards,
Kumar

Hi Kumar,
There could be three reasons.
1. You may have more than one recon accounts for different vendor groups. So, you need to select all the GL accounts when reconcile with Vendor balances.
2. You may have some special GL transactions, which may post to different reconciliation accounts. Please check Special GL transactions (Down payments so on)
3. Your vendor recon accounts may be changed after some postings. Please check. If changed, you need to select these GLs also for reconciliation with vendor balances.
Hope this will help you. If not clear please reply, I will explain you.
Pl. assign points if useful.
Thanks

Hi, Im from Philippines,.... i am currently using my iPhone 4 (iOs.6.3)it started when i upgrade it from iOs4 to iOs 6.3 , My iPhone doesnt identify numbers even if its in my contact if its not starting with +63 ..what will i do?

Hi, Im from Philippines,.... i am currently using my iPhone 4 (iOs.6.3)it started when i upgrade it from iOs4 to iOs 6.3 , My iPhone doesnt identify numbers even if its in my contact if its not starting with +63 ..what will i do?
I change everything into +63 and i thought everything is already fine,.. and then now , i dont know what happened why it doesnt recognize numbers with +63 anymore

Hello hsielglad,
Thank you for your question. iTunes 11.1 is required to update to and sync with iOS 7. If you are still running iTunes 10.6.3, I recommend trying to obtain the update by going to the iTunes menu and selecting Check for Updates.
iTunes: How to install the latest version
http://support.apple.com/kb/HT5654
If you continue to get the message that iTunes is up to date, you can download the latest version of iTunes here:
Download iTunes
http://www.apple.com/itunes/download/
Once the file downloads, double click on the installation file that downloaded to initiate the installation.
Best,
Sheila M.

Error: response does not start with HTTP

hi,
i am using a MIDP class to send a string to a java servlet which then returns a .gif image. the string is being successfully to the servlet, but an exception is being thrown when the image is being sent back.
java.io.IOException: response does not start with HTTP it starts with: GIF89aï4
at com.sun.midp.io.j2me.http.Protocol.readResponseMessage(Protocol.java:2166)
at com.sun.midp.io.j2me.http.Protocol.finishRequestGetResponseHeader(Protocol.java:1934)
at com.sun.midp.io.j2me.http.Protocol.sendRequest(Protocol.java:1598)
at com.sun.midp.io.j2me.http.Protocol.sendRequest(Protocol.java:1517)
at com.sun.midp.io.j2me.http.Protocol.openInputStream(Protocol.java:484)
my code is as follows in the midp class :
HttpConnection c = null;
InputStream is = null;
StringBuffer sb = new StringBuffer();
String url="http://localhost:8090/ProjectServer/createMap";
url=url+"?Source="+src+"&Destination="+dest;
try {
c = (HttpConnection)Connector.open(url,Connector.READ_WRITE, true);
c.setRequestMethod(HttpConnection.GET); //default
//is = c.openDataInputStream();
is = new DataInputStream(c.openInputStream()); //openInputStream(); // transition to connected!
Image im=null;
try
ByteArrayOutputStream bStrm = new ByteArrayOutputStream();
int ch;
while ((ch = is.read()) != -1)
bStrm.write(ch);
// Place into image array
byte imageData[] = bStrm.toByteArray();
// Create the image from the byte array
im = Image.createImage(imageData, 0, imageData.length);
finally
// Clean up
if (is != null)
is.close();
the code in the servlet is as follows :_
ServletContext sc = getServletContext();
// Get the MIME type of the image
String mimeType = sc.getMimeType("route.gif");
if (mimeType == null) {
sc.log("Could not get MIME type ");
response.setStatus(HttpServletResponse.SC_INTERNAL_SERVER_ERROR);
return;
// Set content type
response.setContentType(mimeType);
// Set content size
response.setContentLength((int)file.length());
// Open the file and output streams
FileInputStream in = new FileInputStream(file);
OutputStream outstream = response.getOutputStream();
// Copy the contents of the file to the output stream
byte[] buf = new byte[1024];
int count = 0;
while ((count = in.read(buf)) >= 0) {
outstream.write(buf, 0, count);
in.close();
outstream.close();
il be immensely grateful if some1 cud tell me whre i am gng wrong.
thnx,
nev

Hi, I�m trying to do the same as above, get MP3 from a Shoutcast server.
I got the same fault ("response does not start with HTTP it starts with: ICY") when I tried to open an HttpConnection as bellow:
============================================
HttpConnection conn = (HttpConnection) Connector.open("http://64.236.34.196/stream/1074");
Then I tried to open a socket connection as bellow:
======================================
SocketConnection conn = (SocketConnection) Connector.open("socket://64.236.34.196:80");
String get = "GET /stream/1074 HTTP/1.1";
DataOutputStream os = conn.openDataOutputStream();
os.writeUTF(get);
InputStream is = conn.openInputStream();
But then I got the following error:
=========================
java.lang.SecurityException: Target port denied to untrusted applications
Could someone help me to find out what is going on?
Thanks a lot!

A name should not start with any special characters

I need to put a condition in iF statement such that a name that is given by the user should not start with any special charecters.A dialog box should display indicating this conditon.Can u plz give sample code for this.My code is as below.
//text box for giving the name
JTextFeild ReportNameText;
//the name is stored in String
String name=ReportNameText.getText();
//Here tell me how the if condition should be written
//condition to be mentioned

Already asked, and answered, here: http://forum.java.sun.com/thread.jspa?threadID=727919
See reply 4 in that thread, and scsi-boy's suggestion of writing another
method to check for "special" characters. And the links to the String
and Character API documentation given.

AR01 REPORT IS NOT TALLYING WITH GL BALANCE

Dear SAP Guru's
AR01 report is not tallying with CWIP gl. during our observation, we found that out of four CWIP assets two of them showing over balance and two of them showing under balance. but when i tried for settling these assets to actual assets, system shows no value for settlement. But when i try for Scrapping, system is allowing for scrapping from these CWIP assets. In General, when ever value is lying in the CWIP, system will allow for settlement, but why in these case it is not allowing. What could be the reason ..for .CWIP assets shows Under/Over value.
Please advice.
regds

Dear Ravi..
Thanks for your early reply...
01. As per the Program documentation, it shows that these report should be executed only before year end closing.
Is there any effect if i execute now.
02. For Your information, i know the exact difference of balance which both AR01 and CWIP GL shows, so to what extent this program ABST2)will help.
03.It would be helpful to me if you have any solution to resolve it.
04. Actually this problem was existing from more than 3 fiscal years...our auditors did not recognize it..now management recognised and want to rectify. If i reverse any entries it will effect previous Statutory reports, so without effecting the previous statements i have resolve it.
Regds,

Expense reports are not processing for future date?

hi folks,
in our co.expense reports are not processing for future date, even though the end date is one month from now the expense reports are not getting paid.
can anybody assist me to come out of this issue.
thanks in advance,
regards
bhanu

HI,
Could you please share how to go Debug mode in Dymanic program, I have scenarion in SAP HR , when Employee is hire , during the hiring action Infotype 32 is updating based on following conditions
********INSERT IT0032 FOR CANDIDATE ID *************
P0001-PERSG<>'5' - True
P0000-MASSN='01'/X
P0000-MASSN='H1'/X
P0000-MASSN<>'84'/X
P0000-MASSN<>'86'/X
P0000-MASSN<>'99'/X
GET_PNALT(ZHR_CREATEP0032)
RP50D-FIELDS <> ''
INS,0032,,,(P0000-BEGDA),(P0000-ENDDA)/D
P0032-PNALT=RP50D-FIELD1
P0032-ZZ_COMPID='05' _ True
Infotype record is being created but there is no data in "RP50D-FIELD1 , so i tried to debug the subroutine GET_PNALT(ZHR_CREATEP0032) as mention in Dynamic action, its not going in debugger mode.
Do you have any Idea about how to debug the program. used in dynamic action
Regards,
Madhu

India cash/bank book report is not matching with GL balance

We have Changed one segment in cash account and cash clearing account for internal petty cash account.
After changing the segment, Closing balance of India cash/bank book report is not matching with GL balance.
Please help.
Regards
Suresh

user702249 wrote:
We have Changed one segment in cash account and cash clearing account for internal petty cash account.
After changing the segment, Closing balance of India cash/bank book report is not matching with GL balance.
Please help.
Regards
SureshPlease do not post duplicates -- India cash/bank book report is not matching with GL balance.

"Layer 1 does not start with a new cell" replicator error

Hi All,
I recently sent a dual layer +R DVD off to our replication house and their system is returning a message that says: "Layer 1 of DVD-Video does not start with a new cell".
I know from reading that the dual-layer breakpoint must be set to the end of a cell, but what does the word "cell" translate into for DVDSP4?
I had the DVD DL+R set to Automatic and Non-Seamless for output for the break point. Should I just try setting the break point manually at the beginning or ending of a track that would be dubbed as just a little more than half the size of the content? (I know in OTP, the Layer 0 has to be bigger than Layer 1)
Please Help!
Cheers,
Dusty

Thanks both of you for your replies.
Eric, I am currently exporting DDPs to send in to the replicator. I also emailed them asking if they accept this format for delivery. (Which I would hope they would, as it is, an answer to DLT of sorts) Thanks for bringing this up, DDP is new to me, as this is our first DL project for replication.
Drew, to answer your reply, yes I have two viable markers (chapter markers) that show up in black, not grayed out, in the tab you mentioned under formatting. I chose manual break point selection for this last disc I burned and chose chapter 4 of that track. (chapter 4 and chapter 5 of track 6 are only options) I have to assume that the "automatic" setting was selecting chapter 5, as it had to see that as the last viable marker available to select, as described in the DVDSP4 manual.
DVDSP4 says that all markers are considered cells- Or actually that tracks are cells and that the markers within them make up more cells. So my question, outside of DDP option, would be, "what truly constitutes a cell boundary in DVDSP4?" Is it the markers within the tracks or the beginning or ends of the tracks themselves?
As a side note, I burned the disc that received the error, "Layer 1 doesn't start with a new cell" from an IMG i created from DVDSP4 through Disk Utility. Word is that IMG's somehow don't include breakpoint information.
So at this point I don't know if it is the IMG or the fact that DVDSP4 wants the break at one of two possible chapter markers in track 6.
(Some more background- this is a TV show season DVD, with thirteen tracks of video, each with 12-14 chapter markers a piece.)
Any more thoughts to help clear the air on what constitutes a true new cell boundary?
Thanks sooo much Eric and Drew, I know this a long read.
Cheers,
Dusty

Path login does not start with a "/" character

I get a "java.lang.RuntimeException: Path login does not start with a "/" character" in my WebApplication.
- Http Status 500
- The server encountered an internal error () that prevented it from fulfilling this request.
Instead I excepted the site for a Re-Login (timout after 10 min), What's wrong?
The server I use is: Sun Java System Application Server Platform Edition 8.0 (build b57-fcs)
Here is the full StackTrace:
[#|2004-05-26T14:50:50.609+0200|SCHWERWIEGEND|sun-appserver-pe8.0|javax.enterprise.system.container.web|_ThreadID=17;|Standard
WrapperValve[OwaFolderTree]: Servlet.service() for servlet OwaFolderTree threw exception
java.lang.RuntimeException: Path login does not start with a "/" character
at org.apache.catalina.core.ApplicationContextFacade.doPrivileged(ApplicationContextFacade.java:451)
at org.apache.catalina.core.ApplicationContextFacade.getRequestDispatcher(ApplicationContextFacade.java:255)
at com.space2go.icafe.S2GHttpServlet.service(S2GHttpServlet.java:3260)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
at sun.reflect.GeneratedMethodAccessor114.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:289)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:311)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:205)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:283)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:102)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:192)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:261)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:215)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:200)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:180)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:582)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at com.sun.enterprise.webservice.EjbWebServiceValve.invoke(EjbWebServiceValve.java:134)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at com.sun.enterprise.security.web.SingleSignOn.invoke(SingleSignOn.java:272)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at com.sun.enterprise.web.VirtualServerValve.invoke(VirtualServerValve.java:209)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:161)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at com.sun.enterprise.web.VirtualServerMappingValve.invoke(VirtualServerMappingValve.java:166)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:979)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:211)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:692)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:647)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:589)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:691)
at java.lang.Thread.run(Thread.java:534)

It looks like you are getting this error when trying to use the RequestDispatcher. There are two different flavors of the RequestDispatcher :ServletRequest.getRequestDispatcher that will take a relative path and ServletContext.getRequestDispatcher that will only take absolute paths (ie start with a '/').
If yoy are trying the use the second version of RequestDispatcher you'll need to adjust the path to an absolute path.
http://java.sun.com/products/servlet/2.3/javadoc/javax/servlet/ServletContext.html

HWS file error when not starting with Ch 0

Hello,
I used the "niScope EX Save to File - HWS Low Level - Single Channel Stream.vi" as my starting point and added 8 channels for a 5105 card. Although this is a complex Queue-based vi, it works fine as long as my RAID is fast enough.
However, we have need to take data from channels 4 to 7 and not start with Ch 0. When I do this, my LabVIEW HWS reader does not see any data, nor does the MATLAB code I have written to read our HWS files.
Looking at the file in HDFView, I see that the data starts in vector0 and not vector1, as when I record Channels 0 to 3.
Perhaps I need to use the HDF5 LabVIEW code to force the writing to a different location in the HDF file?
Thanks for your help.

Hello,
I was out of the office Mon. and Tues. I took out a section that just collects one 5105 card in a steaming, continuous collect mode. This is part of a much bigger VI and I included the “Helper Aps” folder that has all the sub-VIs for that larger app. There are more sub-VIs than you need for “5105 Cont Collect.vi”, but it should run once you tell it where the sub-VIs are. Included is a quick-look reader I use to look at the data.
The data file Ch_0_to_3_5105-0.hws can be read, but the Ch_4_to_7_5105-0.hws file cannot.
Thank you for your help.
Attachments:
5105_Cont_Collect.zip ‏3267 KB

DB is not starting with spfile .

Hi ,
i am running DB (10.2.0.4) DB on solaris.x64 platform.
When i started the database after install , its giving error as
SQL> startup
ORA-00064: object is too large to allocate on this O/S (1,3994560)
I checked the sga_target size in spfile , which is set to (729145600 bytes ~ 595 M)
When installed another DB with sga_target size as 412 M
and started the DB it gives follwing error .
SQL> startup
SQL> ORA-00821: Specified value of sga_target 412M is too small, needs to be at least 552M
if i start the same DB with pfile where sga_target has set to 1632 M , the DB is starting successfully.
My question is if it is starting with this higher value of sga_target in with pfile , why it is not starting with a lesser value.

Cause: The specified value of sga_target is too small for the SGA to accommodate all of the necessary SGA components such as the log buffer, buffer pools, shared pool, etc.
Action: Set sga_target to the recommended value or reduce the values of any SGA component size parameters you have specified.
The previous solutions where correct, but if you're not providing a full path on the "CREATE SPFILE" make sure you have defined the parameter SPFILE. Otherwise you'll get the SPFILE created on $ORACLE_HOME/dbs/spfileDBNAME.ora
Regards,
Enric Moya

Managed server is not starting with MSI mode

Managed server not starting with MSI mode even though we enabled the managed server independence mode
Started the admin server and managed server first time enabled the MSI mode.
Restarted all admin and Managed server.
We have tested the following scenarios
scenarios1: Stopped the Admin server and restarted the Managed server with MSI mode it comes up.
scenarios2:Admin server is running but not able to connect to the managed server
In this scenario
we have removed the Network cable and restarted the managed server its throwing ldap error.
<Aug 14, 2010 1:58:32 PM SGT> <Error> <Security> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: [Security:090730]Failed to verify credential mapper LDAP hierarchy
netscape.ldap.LDAPException: failed to connect to server ldap://sgppsr00383:16827 (91)
at netscape.ldap.LDAPConnSetupMgr.connectServer(LDAPConnSetupMgr.java:515)
at netscape.ldap.LDAPConnSetupMgr.openSerial(LDAPConnSetupMgr.java:435) at netscape.ldap.LDAPConnSetupMgr.connect(LDAPConnSetupMgr.java:274)
at netscape.ldap.LDAPConnSetupMgr.openConnection(LDAPConnSetupMgr.java:199)
at netscape.ldap.LDAPConnThread.connect(LDAPConnThread.java:109)
at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:1083) at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:954)
at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:781)
at weblogic.ldap.EmbeddedLDAPConnection.getAndInitDelegate(EmbeddedLDAPConnection.java:2031)
at weblogic.ldap.EmbeddedLDAPConnection.add(EmbeddedLDAPConnection.java:1065) at weblogic.security.providers.credentials.DefaultCredentialMapperLDAPHelper.addEntry(DefaultCredentialMapperLDAPHelper.java:537)
at weblogic.security.providers.credentials.DefaultCredentialMapperLDAPHelper.createOrgUnit(DefaultCredentialMapperLDAPHelper.java:432)
at weblogic.security.providers.credentials.DefaultCredentialMapperLDAPHelper.verifyHierarchy(DefaultCredentialMapperLDAPHelper.java:407)
at weblogic.security.providers.credentials.DefaultCredentialMapperLDAPHelper.<init>(DefaultCredentialMapperLDAPHelper.java:146) at weblogic.security.providers.credentials.DefaultCredentialMapperLDAPHelper.getInstance(DefaultCredentialMapperLDAPHelper.java:112)
at weblogic.security.providers.credentials.DefaultCredentialMapperProviderImpl.initialize(DefaultCredentialMapperProviderImpl.java:93)
at com.bea.common.security.internal.legacy.service.SecurityProviderImpl.init(SecurityProviderImpl.java:53)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:340) at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:292)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:263)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:71)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:461) at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:822)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:851)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1007)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854) at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209) at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
- with nested exception:
Managed server looking for ldap configuration from admin server.
I have checked the all configuration file same on both managed server and admin server.
Please let me know How to recover the managed server in this scenario.
Edited by: user10773210 on Aug 16, 2010 11:55 PM
Edited by: user10773210 on Aug 17, 2010 2:38 AM

thanks for the reply....
the managed server is pointing to jrokit_160_22_D1.1.1-3 jdk....the server has enough ram also...while running the managed server showing status 'STARTING' for long period of time...and the admin server health goes 'Warning' because of threadpool....when we stop the managed server then adminserver health becomes ok...

Expense Report is not starting with TRIPSCHEMA

Similar Messages

Maybe you are looking for