Expenses gl displaying venodr name

Hi
We have an issue relating to expenses salary GL, my client has developed a report like ZFAGLL03. While generating this report its displaying vendor name. They are uploading salary jvs through bdc calling f-02 at a time along with esi,pf,reimbursements. I am not getting exactly where its picking the name.
Thanks for you reply
Regards,
Sudharshan.

Since it is your custom development, it is hard for anyone else to answer this.  You need to sit with your ABAPer and debug the code and look where LFA1-NAME1 is being fetched and displayed.

Similar Messages

  • How Can I Display the Name of iPhoto Library?

    I manage a huge number of images so I keeep them in their own iPhoto libraries. In order to change libraries, I have to rename the one I have just left and then restart iPhoto. I have looked for years but cannot find a way for iPhoto to display the name of the library it has open. I could remember the names of all my libraries if I was not forced to change them in order to leave them and go to another. Does iPhoto tell you the name of the library you have open?
    Thanks
    20"iMAc G5   Mac OS X (10.4.5)  

    Hi John,
    iPhoto 6 now shows the name of the library in the title bar of the iPhoto window. At least it did the other day for me.
    You can have a unique name for each of your libraries and use the Option key to launch iPhoto and choose to open another library, then navigate to the library, highlight it and click open.
    You can also use one of the iPhoto Library managers to switch between libraries.
    iPhoto Library Manager
    iPhoto Library Manager documentation
    this page will show you everything you can do with iPhoto Library Manager.
    You can also try iPhoto Buddy

  • Displaying the name of iPhoto library

    I have a large number of different iPhoto libraries, and was wondering if there was some way to display the name of the Library in use. I have given them all different names, and can usually tell which one I am in, but not always.
    iPhoto insists on calling each one "Library" in the information pane. I've looked through the responses to this question in the iPhoto 5 section (i.e. "can't do it") but, now that iPhoto offers multiple library support, you'd think this would be addressed.
    Th causes of my problem are twofold: 1) I often duplicate libraries and then split them by deleting different film rolls from each and 2) I'm getting old, and my memory is not what it once was, so I tend to forget which of the two libraries I've opened and which files should be deleted.
    Any suggestions?

    luba:
    Yes if you use iPhoto Library Manager to manage your multiple libraries as you can see here. iPLM adds the library title to the top of iPhoto's window when you go thru iPLM. It will also let you copy albums or rolls between libraries and keep the keywords and comments like this.
    I have my workflow setup to always go thru iPLM so I always know exactly which library I'm opening. My memory isn't good enough to remember the last one I had opened.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Displaying the name of a minimum value in crosstab

    Hi,
    we have a crosstab with [Job Number] in the left column, [Quantitiy Break] as the column headers and (min[bid value]) as the measure.
    We want to display the name of the [vendor] who gave the minimum bid alongside the measure in the crosstab.
    we have tried allsorts of formula along the lines of:
    =[Vendor] Where ([Bid Value Row]=(Min([Bid Value Row])))
    =[Vendor] Where ([Bid Value Row]=(Min([Bid Value Row] ForEach ([Job Number]))))
    =[Vendor] Where ([Bid Value Row]=(Min([Bid Value Row] ForEach ([Job Number];[Quantity Break]))))
    etc
    can anyone help?
    thanks very much
    Keith

    You could try the method I use to pull this back from the database in one go...
    Create an object
    start with bidvalue (aggregated on the right level, formatted as string,
    make sure you use leading zeroes and room enough for the highest possible value)
    and concatenate the vendor after that.
    Now use right(min(new object);lenght(new object)-length bidvalue string)
    (might have tweak a bit to get the exact vendor part of the string, this is from the top of my head,
    but no doubt you'll get it to work)
    This will find the combination with the minimum bidvalue, but only return the vendor part.
    Hope this helps,
    Marianne

  • Messages on Mac app not displaying contact name

    On Messages on my Mac, despite being synced up with iCloud, the Messages app does not display the contact names of anyone. It shows their phone numbers or Apple email addresses. Is there any preference I can change to make it show the contact names? If it exists I haven't found it. I also used the app meant to scrub contacts to make the phone number format conform with Apple's standard (xxx) xxx-xxxx please help!

    HI,
    I take it you are no longer on OS X 10.7.2 ?
    The display of Names (and/or Pics) in Buddy Lists and the main Messages window (when in a  Chat)  in Mountain Lion is controlled from the View Menu > Buddy Names.
    To set this choice the window has to be the "Front" one.
    So the Messages window (CMD + 0 in the window Menu) gets brought to the Front when any sort of Text Chat is going On.
    the View Menu > Buddy Names items is selected and navigation to the choice you want.
    Full names is the First name, Last name as seen in the Contacts app (Formerly the Address Book)
    Short Names are Nicknames (normally set via Messages) or First name only if no Nickname exists.
    Handle is the Screen Names (If AIM), Jabber ID (If Facebook, GoogleTalk or other Jabber ID) or in the case of iMessages the current contact ID or iPhone number.
    You can do the same to any Buddy list that you also display.
    It can be used in Conjunction with the View Menu > Messages which has options to display Pics, Names or Pics and Names.
    (Names now refers to whatever is set in the "Buddy Names" option).
    8:49 PM      Friday; November 16, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Is possible to display Country Name in incoming calls?

    Is possible to display Country Name in incoming calls? If number is saved with country code. Attached is the sample as i mean.

    If you need one more column, then you need to expand the field catalog table and data table as you did for all other fields and you need to code the logic to calculate the subtotals and populate the new column, but if you want to have row, that will be easy. For more info you can [refer |http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4063c42a-2549-2c10-fab6-a8c99d98b9b5?quicklink=index&overridelayout=true]this:

  • Creating a Folder Within Form or Document Library & Display the name not in the name column.

    I have created a form library that will used to create folders within that. The folder creation is done using an InfoPath Form that has been uploaded to the Form Library. When the new folder was created the name will be displayed at the Name column within
    the Form Library. I want to change that to another column like documents or suchlike.
    Can it be done using InfoPath 2010 VSTA C# or not? If their are other options available please could you try to inform me!
    Thank You,
    Chiranthaka

    Hi,     
    If you want to show the name of folder in another column, a workaround is that you can create an extra column, then create a SharePoint Designer workflow to set the value of
    this column with the name of folder.
    Here is a link about Create Workflow using SharePoint Designer and set field value for your reference:
    http://www.codeproject.com/Tips/419037/Create-Workflow-using-SharePoint-Designer
    I have seen a similar post from you in the link below:
    http://social.technet.microsoft.com/Forums/en-US/c3ff3f17-dbe2-40f9-86c5-ff7d4b663f09/creating-a-folder-within-form-or-document-library-display-the-name-not-in-the-name-column?forum=sharepointcustomizationprevious
    It's recommended that you post a single question in a single thread which will make it easier to be discussed by others.
    Best regards
    Patrick Liang
    TechNet Community Support

  • Display Month name Year

    Hi,
    Which variable Displays Month name Year (Exaple: July 2007)???
    Help will be gratly appreciated...
    Thanks...

    Hi,
    Thanks for your information..
    But i am not getting like month and year display( Example:  Sept 2007)
    I am using Text variable 0P_FPER on 0Fiscal year/period..
    and entering Input as 006.2007 then the resultant query displays as 06.
    Please suggest me how to do it??
    For entry i should give 006.2007 (or) Sept 2007..
    But in the result it should display as Sept 2007..
    Help will be greatly appreciated...
    Thanks

  • Value in input field of Hier.Node variable displays tech.name of the IO

    Dear all,
    we are facing an issue with Hierarchy node variable(auth.) in the selection screen of webReports.
    After selecting a hierarchy node value,it is displayed along with + sign and tech.name of the Infobject in input field .
    example: lets say we have Country Hierarchy and i have selected Country group 'NAM' node..This is displayed as "+NAM(ZCOUTRYGRP)". where ZCOUTRYGRP is tech.name of the InfoObject Country group.
    Expected value is just "NAM" which is Key .Does anyone have solution for this? This Problem occuers when we select Level 01 value of hierarchy and we do have hierarchy node values from same INfoObject.
    Regards,
    Murali.
    Edited by: Muralidhar c on Aug 1, 2009 1:24 PM
    Edited by: Muralidhar c on Aug 3, 2009 10:40 AM

    it works as designed.found in sap help.

  • How to display the name of my metric in a PivotTable.

    Hi I am working with OBIEE Plus
    How to display the name of my metric in a PivotTable.
    Why when I add a field to the sector of the measures in a PivotTable field name disappears.
    Help please
    Thanks beforehand

    Where are your 'measure labels' ? These show what the metric is.

  • How to display database name in page footer in webi report

    Hi Every one,
    I have migrated deski report from BO 6.5 to BI 4.1. and converted Deski to WEBI in 4.1.
    In Bo 6.5 page footer displaying database name but BI 4.1 it showing database type (like Oracle 10g,9i ..etc..).
    I want database name in page footer.
    Please any one help me to solve this issue.
    Thanks

    Hi Thanks for your reply.
    We have tried this option but its not helpful.
    Below syntax is  in both BO 6.5 and BI 4.1.but in 6.5 it showing database name where as in BI 4.1 it showing database type
    ="Track GPQ Database - " + Upper(Substr(Connection((DataProvider(([product])))) ;Pos(Connection((DataProvider(([Product])))) ;"DATABASE")+9 ;7)).

  • Display Vendor name in vendinvoice Report

    hi expert i have little query , in ax 2012 R3 there is report vend-invoice Report, actually i want to display vendor name on that report,by default there is no vendor name,for this i just added vendor name(extended data type) in vendinvoice temp table,and
    then just reference that field in class of vendinvoice,rebuild the ax,and in vs2012  add that field in report design ,and depolye ,but still the vendor name not does not showed in report...plz guide me..
    Regards.

    Hi Munsifuv,
    Is this a question about Power Query? If not, I'd recommend directing your question to a Dynamics Ax forum.
    Ehren

  • Display Full Name in SharePoint Designer Workflow Email

    Hi!
        I want to Display Full Name of a User value from "Assigned to" column...
        When I use lookup on "Assigned to" column I get domain/username instead I want to display John Smith (Full Name)...
        Is there a way to do that within SharePoint Designer...

    Hi,
    Even I am facing the exactly similar issue as Ashish. Also I don’t have Central Administration access :(
    But I was just wondering, is there any way to extract the proper name in FName and LName format using user profile details option?
    I mean on the top-right section on sharepoint site you can see “Welcome username” section. On this you can select “My
    settings” option where you can see a form with user details including Name field (e.g. Sachin Dubey) and Account field (e.g. CompanyName/Dubey.s.4).
    In our case the workflow takes “Account” field instead of “Name” field so can we make any settings from the workflow
    or sharepoint front-end so that it takes Name field.
    Help is much appreciated.
    Sachin D Sharepoint Developer

  • The Video app in OS7 update doesn't display file names.

    The Video app in OS7 doesn't display file names under the image.
    How can I identify my video files without having to open each file to access the file name.
    Is there something I am missing or is this just an omission in the OS7 upgrade.
    I am a music teacher and this lack of file names makes the app virtually useless for use in the classroom.

    Agreed. This has been a problem with TV Shows in the Videos app since forever, but at least it used to put the name under Movies. Now instead fixing it for TV Shows in iOS 7 they've done the opposite and made Movies fail the same way as TV Shows always have!
    Apparently it still lists the title for Home Videos, so the best work around for now is probably to reclassify all your Movies as Home Videos. Sigh.
    Apple's Videos app development team seem to be unaware that iTunes can store and play movies and TV shows that don't come from the iTunes Store, videos that don't have covers, and that need to display the names and other info from iTunes for them. They also seem to not understand that the default grid view for videos is totally inadequate for users with scores or hundreds of movies and TV shows that they home share to their iPads and iPhones from iTunes. The Videos app needs a list view at least, as well as a grid view.
    All they have to do is look at how the Apple TV handles the same files and meta-data from iTunes and provide something similar for the iPad and iPhone. Why after all these years they still don't get that I have no idea.

  • Bank transfers: the file DME doesn't display the name of the company

    Hi all,
    In the DME file created by t.code F110, the record 20, doesn't display the name of the company which orders the bank transfer.
    Where should I put it?
    Thanks

    Neeraj,
    Its ECC6.0 and I upload the file by going into their website and putting userid and password and then upload the fiel over there and click send.Is there any possibility the file contains any hidden characters which we dont see? where should I send you dummy file whats your email id.
    Regards
    Shaun

Maybe you are looking for